diff --git a/qcom/yupik-usb.dtsi b/qcom/yupik-usb.dtsi
index c33d2f3e6f02..4117781f37b6 100644
--- a/qcom/yupik-usb.dtsi
+++ b/qcom/yupik-usb.dtsi
@@ -1,4 +1,5 @@
 #include <dt-bindings/clock/qcom,gcc-yupik.h>
+#include <dt-bindings/phy/qcom,yupik-qmp-usb3.h>
 
 &soc {
 	/* Primary USB port related controller */
@@ -31,7 +32,7 @@
 		resets = <&gcc GCC_USB30_PRIM_BCR>;
 		reset-names = "core_reset";
 
-		qcom,core-clk-rate = <200000000>;
+		qcom,core-clk-rate = <133333333>;
 		qcom,core-clk-rate-hs = <66666667>;
 		qcom,num-gsi-evt-buffs = <0x3>;
 		qcom,gsi-reg-offset =
@@ -43,11 +44,20 @@
 			0x1a4>; /* GSI_IF_STS */
 		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;
 		usb-role-switch;
+		extcon = <&eud>;
+
+		interconnect-names = "usb-ddr", "usb-ipa", "ddr-usb";
+		interconnects = <&aggre1_noc MASTER_USB3_0 &mc_virt SLAVE_EBI1>,
+				<&aggre1_noc MASTER_USB3_0 &cnoc2 SLAVE_IPA_CFG>,
+				<&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_USB3_0>;
+
+		qcom,usb-charger = <&battery_charger>;
 
 		dwc3@a600000 {
 			compatible = "snps,dwc3";
 			reg = <0xa600000 0xe000>;
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			usb-phy = <&usb2_phy0>, <&usb_qmp_dp_phy>;
 			linux,sysdev_is_parent;
 			snps,disable-clk-gating;
 			snps,has-lpm-erratum;
@@ -69,6 +79,218 @@
 		};
 	};
 
+	/* Primary USB port related High Speed PHY */
+	usb2_phy0: hsphy@88e3000 {
+		compatible = "qcom,usb-hsphy-snps-femto";
+		reg = <0x88e3000 0x114>,
+			<0x088e2000 0x4>;
+		reg-names = "hsusb_phy_base",
+			"eud_enable_reg";
+
+		vdd-supply = <&L10C>;
+		vdda18-supply = <&L1C>;
+		vdda33-supply = <&L2B>;
+		qcom,vdd-voltage-level = <0 880000 880000>;
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "ref_clk_src";
+
+		resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		reset-names = "phy_reset";
+		qcom,param-override-seq = <0x43 0x70>; /* override_x1 */
+	};
+
+	/* Primary USB port related QMP USB DP Combo PHY */
+	usb_qmp_dp_phy: ssphy@88e8000 {
+		compatible = "qcom,usb-ssphy-qmp-dp-combo";
+		reg = <0x88e8000 0x3000>;
+		reg-names = "qmp_phy_base";
+
+		vdd-supply = <&L1B>;
+		qcom,vdd-voltage-level = <0 912000 912000>;
+		qcom,vdd-max-load-uA = <47000>;
+		core-supply = <&L6B>;
+
+		clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+			<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+			<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK_SRC>,
+			<&usb3_phy_wrapper_gcc_usb30_pipe_clk>,
+			<&rpmhcc RPMH_CXO_CLK>,
+			<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+		clock-names = "aux_clk", "pipe_clk", "pipe_clk_mux",
+				"pipe_clk_ext_src", "ref_clk_src",
+				"com_aux_clk";
+
+		resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+			<&gcc GCC_USB3_PHY_PRIM_BCR>;
+		reset-names = "global_phy_reset", "phy_reset";
+
+		qcom,qmp-phy-reg-offset =
+			<USB3_DP_PCS_PCS_STATUS1
+			 USB3_DP_PCS_USB3_AUTONOMOUS_MODE_CTRL
+			 USB3_DP_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR
+			 USB3_DP_PCS_POWER_DOWN_CONTROL
+			 USB3_DP_PCS_SW_RESET
+			 USB3_DP_PCS_START_CONTROL
+			 0xffff /* USB3_PHY_PCS_MISC_TYPEC_CTRL */
+			 USB3_DP_COM_POWER_DOWN_CTRL
+			 USB3_DP_COM_SW_RESET
+			 USB3_DP_COM_RESET_OVRD_CTRL
+			 USB3_DP_COM_PHY_MODE_CTRL
+			 USB3_DP_COM_TYPEC_CTRL
+			 USB3_DP_PCS_CLAMP_ENABLE
+			 USB3_DP_COM_TYPEC_STATUS>;
+
+		qcom,qmp-phy-init-seq =
+			/* <reg_offset, value, delay> */
+			<USB3_DP_QSERDES_COM_SSC_EN_CENTER 0x01 0
+			USB3_DP_QSERDES_COM_SSC_PER1 0x31 0
+			USB3_DP_QSERDES_COM_SSC_PER2 0x01 0
+			USB3_DP_QSERDES_COM_SSC_STEP_SIZE1_MODE0 0xDE 0
+			USB3_DP_QSERDES_COM_SSC_STEP_SIZE2_MODE0 0x07 0
+			USB3_DP_QSERDES_COM_SSC_STEP_SIZE1_MODE1 0xDE 0
+			USB3_DP_QSERDES_COM_SSC_STEP_SIZE2_MODE1 0x07 0
+			USB3_DP_QSERDES_COM_SYSCLK_BUF_ENABLE 0x0A 0
+			USB3_DP_QSERDES_COM_CMN_IPTRIM 0x20 0
+			USB3_DP_QSERDES_COM_CP_CTRL_MODE0 0x06 0
+			USB3_DP_QSERDES_COM_CP_CTRL_MODE1 0x06 0
+			USB3_DP_QSERDES_COM_PLL_RCTRL_MODE0 0x16 0
+			USB3_DP_QSERDES_COM_PLL_RCTRL_MODE1 0x16 0
+			USB3_DP_QSERDES_COM_PLL_CCTRL_MODE0 0x36 0
+			USB3_DP_QSERDES_COM_PLL_CCTRL_MODE1 0x36 0
+			USB3_DP_QSERDES_COM_SYSCLK_EN_SEL 0x1A 0
+			USB3_DP_QSERDES_COM_LOCK_CMP_EN 0x04 0
+			USB3_DP_QSERDES_COM_LOCK_CMP1_MODE0 0x14 0
+			USB3_DP_QSERDES_COM_LOCK_CMP2_MODE0 0x34 0
+			USB3_DP_QSERDES_COM_LOCK_CMP1_MODE1 0x34 0
+			USB3_DP_QSERDES_COM_LOCK_CMP2_MODE1 0x82 0
+			USB3_DP_QSERDES_COM_DEC_START_MODE0 0x82 0
+			USB3_DP_QSERDES_COM_DEC_START_MODE1 0x82 0
+			USB3_DP_QSERDES_COM_DIV_FRAC_START1_MODE0 0xAB 0
+			USB3_DP_QSERDES_COM_DIV_FRAC_START2_MODE0 0xEA 0
+			USB3_DP_QSERDES_COM_DIV_FRAC_START3_MODE0 0x02 0
+			USB3_DP_QSERDES_COM_DIV_FRAC_START1_MODE1 0xAB 0
+			USB3_DP_QSERDES_COM_DIV_FRAC_START2_MODE1 0xEA 0
+			USB3_DP_QSERDES_COM_DIV_FRAC_START3_MODE1 0x02 0
+			USB3_DP_QSERDES_COM_VCO_TUNE_MAP 0x02 0
+			USB3_DP_QSERDES_COM_VCO_TUNE1_MODE0 0x24 0
+			USB3_DP_QSERDES_COM_VCO_TUNE1_MODE1 0x24 0
+			USB3_DP_QSERDES_COM_VCO_TUNE2_MODE1 0x02 0
+			USB3_DP_QSERDES_COM_HSCLK_SEL 0x01 0
+			USB3_DP_QSERDES_COM_CORECLK_DIV_MODE1 0x08 0
+			USB3_DP_QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0xCA 0
+			USB3_DP_QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1E 0
+			USB3_DP_QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0xCA 0
+			USB3_DP_QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1E 0
+			USB3_DP_QSERDES_COM_BIN_VCOCAL_HSCLK_SEL 0x11 0
+			USB3_DP_QSERDES_TXA_RES_CODE_LANE_TX 0x60 0
+			USB3_DP_QSERDES_TXA_RES_CODE_LANE_RX 0x60 0
+			USB3_DP_QSERDES_TXA_RES_CODE_LANE_OFFSET_TX 0x11 0
+			USB3_DP_QSERDES_TXA_RES_CODE_LANE_OFFSET_RX 0x02 0
+			USB3_DP_QSERDES_TXA_LANE_MODE_1 0xD5 0
+			USB3_DP_QSERDES_TXA_LANE_MODE_2 0x00 0
+			USB3_DP_QSERDES_TXA_RCV_DETECT_LVL_2 0x12 0
+			USB3_DP_QSERDES_TXA_PI_QEC_CTRL 0x40 0
+			USB3_DP_QSERDES_RXA_UCDR_FO_GAIN 0x09 0
+			USB3_DP_QSERDES_RXA_UCDR_SO_GAIN 0x05 0
+			USB3_DP_QSERDES_RXA_UCDR_FASTLOCK_FO_GAIN 0x2F 0
+			USB3_DP_QSERDES_RXA_UCDR_SO_SATURATION_AND_ENABLE 0x7F 0
+			USB3_DP_QSERDES_RXA_UCDR_FASTLOCK_COUNT_LOW 0xFF 0
+			USB3_DP_QSERDES_RXA_UCDR_FASTLOCK_COUNT_HIGH 0x0F 0
+			USB3_DP_QSERDES_RXA_UCDR_PI_CONTROLS 0x99 0
+			USB3_DP_QSERDES_RXA_UCDR_SB2_THRESH1 0x08 0
+			USB3_DP_QSERDES_RXA_UCDR_SB2_THRESH2 0x08 0
+			USB3_DP_QSERDES_RXA_UCDR_SB2_GAIN1 0x00 0
+			USB3_DP_QSERDES_RXA_UCDR_SB2_GAIN2 0x04 0
+			USB3_DP_QSERDES_RXA_VGA_CAL_CNTRL1 0x54 0
+			USB3_DP_QSERDES_RXA_VGA_CAL_CNTRL2 0x0C 0
+			USB3_DP_QSERDES_RXA_RX_EQU_ADAPTOR_CNTRL2 0x0F 0
+			USB3_DP_QSERDES_RXA_RX_EQU_ADAPTOR_CNTRL3 0x4A 0
+			USB3_DP_QSERDES_RXA_RX_EQU_ADAPTOR_CNTRL4 0x0A 0
+			USB3_DP_QSERDES_RXA_RX_IDAC_TSETTLE_LOW 0xC0 0
+			USB3_DP_QSERDES_RXA_RX_IDAC_TSETTLE_HIGH 0x00 0
+			USB3_DP_QSERDES_RXA_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x77 0
+			USB3_DP_QSERDES_RXA_SIGDET_CNTRL 0x04 0
+			USB3_DP_QSERDES_RXA_SIGDET_DEGLITCH_CNTRL 0x0E 0
+			USB3_DP_QSERDES_RXA_RX_MODE_00_LOW 0xFF 0
+			USB3_DP_QSERDES_RXA_RX_MODE_00_HIGH 0x7F 0
+			USB3_DP_QSERDES_RXA_RX_MODE_00_HIGH2 0x7F 0
+			USB3_DP_QSERDES_RXA_RX_MODE_00_HIGH3 0x7F 0
+			USB3_DP_QSERDES_RXA_RX_MODE_00_HIGH4 0x97 0
+			USB3_DP_QSERDES_RXA_RX_MODE_01_LOW 0xDC 0
+			USB3_DP_QSERDES_RXA_RX_MODE_01_HIGH 0xDC 0
+			USB3_DP_QSERDES_RXA_RX_MODE_01_HIGH2 0x5C 0
+			USB3_DP_QSERDES_RXA_RX_MODE_01_HIGH3 0x7B 0
+			USB3_DP_QSERDES_RXA_RX_MODE_01_HIGH4 0xB4 0
+			USB3_DP_QSERDES_RXA_DFE_EN_TIMER 0x04 0
+			USB3_DP_QSERDES_RXA_DFE_CTLE_POST_CAL_OFFSET 0x38 0
+			USB3_DP_QSERDES_RXA_AUX_DATA_TCOARSE_TFINE 0xA0 0
+			USB3_DP_QSERDES_RXA_DCC_CTRL1 0x0C 0
+			USB3_DP_QSERDES_RXA_GM_CAL 0x1F 0
+			USB3_DP_QSERDES_RXA_VTH_CODE 0x10 0
+			USB3_DP_QSERDES_TXB_RES_CODE_LANE_TX 0x60 0
+			USB3_DP_QSERDES_TXB_RES_CODE_LANE_RX 0x60 0
+			USB3_DP_QSERDES_TXB_RES_CODE_LANE_OFFSET_TX 0x11 0
+			USB3_DP_QSERDES_TXB_RES_CODE_LANE_OFFSET_RX 0x02 0
+			USB3_DP_QSERDES_TXB_LANE_MODE_1 0xD5 0
+			USB3_DP_QSERDES_TXB_LANE_MODE_2 0x00 0
+			USB3_DP_QSERDES_TXB_RCV_DETECT_LVL_2 0x12 0
+			USB3_DP_QSERDES_TXB_PI_QEC_CTRL 0x54 0
+			USB3_DP_QSERDES_RXB_UCDR_FO_GAIN 0x09 0
+			USB3_DP_QSERDES_RXB_UCDR_SO_GAIN 0x05 0
+			USB3_DP_QSERDES_RXB_UCDR_FASTLOCK_FO_GAIN 0x2F 0
+			USB3_DP_QSERDES_RXB_UCDR_SO_SATURATION_AND_ENABLE 0x7F 0
+			USB3_DP_QSERDES_RXB_UCDR_FASTLOCK_COUNT_LOW 0xFF 0
+			USB3_DP_QSERDES_RXB_UCDR_FASTLOCK_COUNT_HIGH 0x0F 0
+			USB3_DP_QSERDES_RXB_UCDR_PI_CONTROLS 0x99 0
+			USB3_DP_QSERDES_RXB_UCDR_SB2_THRESH1 0x08 0
+			USB3_DP_QSERDES_RXB_UCDR_SB2_THRESH2 0x08 0
+			USB3_DP_QSERDES_RXB_UCDR_SB2_GAIN1 0x00 0
+			USB3_DP_QSERDES_RXB_UCDR_SB2_GAIN2 0x04 0
+			USB3_DP_QSERDES_RXB_VGA_CAL_CNTRL1 0x54 0
+			USB3_DP_QSERDES_RXB_VGA_CAL_CNTRL2 0x0C 0
+			USB3_DP_QSERDES_RXB_RX_EQU_ADAPTOR_CNTRL2 0x0F 0
+			USB3_DP_QSERDES_RXB_RX_EQU_ADAPTOR_CNTRL3 0x4A 0
+			USB3_DP_QSERDES_RXB_RX_EQU_ADAPTOR_CNTRL4 0x0A 0
+			USB3_DP_QSERDES_RXB_RX_IDAC_TSETTLE_LOW 0xC0 0
+			USB3_DP_QSERDES_RXB_RX_IDAC_TSETTLE_HIGH 0x00 0
+			USB3_DP_QSERDES_RXB_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x77 0
+			USB3_DP_QSERDES_RXB_SIGDET_CNTRL 0x04 0
+			USB3_DP_QSERDES_RXB_SIGDET_DEGLITCH_CNTRL 0x0E 0
+			USB3_DP_QSERDES_RXB_RX_MODE_00_LOW 0x7F 0
+			USB3_DP_QSERDES_RXB_RX_MODE_00_HIGH 0xFF 0
+			USB3_DP_QSERDES_RXB_RX_MODE_00_HIGH2 0x3F 0
+			USB3_DP_QSERDES_RXB_RX_MODE_00_HIGH3 0x7F 0
+			USB3_DP_QSERDES_RXB_RX_MODE_00_HIGH4 0xA6 0
+			USB3_DP_QSERDES_RXB_RX_MODE_01_LOW 0xDC 0
+			USB3_DP_QSERDES_RXB_RX_MODE_01_HIGH 0xDC 0
+			USB3_DP_QSERDES_RXB_RX_MODE_01_HIGH2 0x5C 0
+			USB3_DP_QSERDES_RXB_RX_MODE_01_HIGH3 0x7B 0
+			USB3_DP_QSERDES_RXB_RX_MODE_01_HIGH4 0xB4 0
+			USB3_DP_QSERDES_RXB_DFE_EN_TIMER 0x04 0
+			USB3_DP_QSERDES_RXB_DFE_CTLE_POST_CAL_OFFSET 0x38 0
+			USB3_DP_QSERDES_RXB_AUX_DATA_TCOARSE_TFINE 0xA0 0
+			USB3_DP_QSERDES_RXB_DCC_CTRL1 0x0C 0
+			USB3_DP_QSERDES_RXB_GM_CAL 0x1F 0
+			USB3_DP_QSERDES_RXB_VTH_CODE 0x10 0
+			USB3_DP_PCS_LOCK_DETECT_CONFIG1 0xD0 0
+			USB3_DP_PCS_LOCK_DETECT_CONFIG2 0x07 0
+			USB3_DP_PCS_LOCK_DETECT_CONFIG3 0x20 0
+			USB3_DP_PCS_LOCK_DETECT_CONFIG6 0x13 0
+			USB3_DP_PCS_REFGEN_REQ_CONFIG1 0x21 0
+			USB3_DP_PCS_RX_SIGDET_LVL 0xA9 0
+			USB3_DP_PCS_CDR_RESET_TIME 0x0A 0
+			USB3_DP_PCS_ALIGN_DETECT_CONFIG1 0x88 0
+			USB3_DP_PCS_ALIGN_DETECT_CONFIG2 0x13 0
+			USB3_DP_PCS_PCS_TX_RX_CONFIG 0x0C 0
+			USB3_DP_PCS_EQ_CONFIG1 0x4B 0
+			USB3_DP_PCS_EQ_CONFIG5 0x10 0
+			USB3_DP_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0xF8 0
+			USB3_DP_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x07 0
+			0xffffffff 0xffffffff 0x00>;
+
+	};
+
 	usb1: hsusb@8c00000 {
 		status = "disabled";
 		compatible = "qcom,dwc-usb3-msm";
@@ -98,8 +320,7 @@
 		resets = <&gcc GCC_USB30_SEC_BCR>;
 		reset-names = "core_reset";
 
-		qcom,core-clk-rate = <120000000>;
-		qcom,core-clk-rate-hs = <66666667>;
+		qcom,core-clk-rate = <60000000>;
 		qcom,num-gsi-evt-buffs = <0x3>;
 		qcom,gsi-reg-offset =
 			<0x0fc /* GSI_GENERAL_CFG */
@@ -114,6 +335,7 @@
 			compatible = "snps,dwc3";
 			reg = <0x8c00000 0xe000>;
 			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			usb-phy = <&usb2_phy1>, <&usb_nop_phy>;
 			linux,sysdev_is_parent;
 			snps,disable-clk-gating;
 			snps,has-lpm-erratum;
@@ -130,7 +352,34 @@
 	};
 
 
+	/* Secondary USB port related High Speed PHY */
+	usb2_phy1: hsphy@88e4000 {
+		status = "disabled";
+		compatible = "qcom,usb-hsphy-snps-femto";
+		reg = <0x88e4000 0x114>;
+		reg-names = "hsusb_phy_base";
+
+		vdd-supply = <&L10C>;
+		vdda18-supply = <&L1C>;
+		vdda33-supply = <&L2B>;
+		qcom,vdd-voltage-level = <0 880000 880000>;
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "ref_clk_src";
+
+		resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		reset-names = "phy_reset";
+	};
+
 	usb_nop_phy: usb_nop_phy {
 		compatible = "usb-nop-xceiv";
 	};
+
+	usb_audio_qmi_dev {
+		compatible = "qcom,usb-audio-qmi-dev";
+		iommus = <&apps_smmu 0x180f 0x0>;
+		qcom,iommu-dma = "disabled";
+		qcom,usb-audio-stream-id = <0xf>;
+		qcom,usb-audio-intr-num = <2>;
+	};
 };