mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-28 02:32:09 -04:00
Staging/IIO patches for 4.19-rc1
Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues. Note, you will have a merge problem with a device tree IIO file and the MAINTAINERS file, both resolutions are easy, just take all changed. There will be a skein file merge issue as well, but that file got deleted so just drop that. Signed-off-by: Greg Kroah-Hartman <[email protected]> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g+2A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykwGACfQZz3Ncvc7thHkZytxxqQnbx5JpkAn0yV5SvF yVXG9SA9yCTKVjYczZjZ =6t/x -----END PGP SIGNATURE----- Merge tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues" * tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits) staging:rtl8192u: Remove unused macro definitions - Style staging:rtl8192u: Add spaces around '+' operator - Style staging:rtl8192u: Remove stale comment - Style staging: rtl8188eu: remove unused mp_custom_oid.h staging: fbtft: Add spaces around / - Style staging: fbtft: Erases some repetitive usage of function name - Style staging: fbtft: Adjust some empty-line problems - Style staging: fbtft: Removes one nesting level to help readability - Style staging: fbtft: Changes gamma table to define. staging: fbtft: A bit more information on dev_err. staging: fbtft: Fixes some alignment issues - Style staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style staging: rtl8188eu: remove unused array dB_Invert_Table staging: rtl8188eu: remove whitespace, add missing blank line staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c staging: rtl8188eu: remove whitespace - style staging: rtl8188eu: cleanup block comment - style staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c staging: rtlwifi: refactor rtl_get_tcb_desc ...
This commit is contained in:
Linus Torvalds
commit
2475c515d4
466 changed files with 28224 additions and 27630 deletions
|
|
@ -1,9 +1,12 @@
|
|||
Analog Devices ADXL345 3-Axis, +/-(2g/4g/8g/16g) Digital Accelerometer
|
||||
Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
|
||||
|
||||
http://www.analog.com/en/products/mems/accelerometers/adxl345.html
|
||||
http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "adi,adxl345"
|
||||
- compatible : should be one of
|
||||
"adi,adxl345"
|
||||
"adi,adxl375"
|
||||
- reg : the I2C address or SPI chip select number of the sensor
|
||||
|
||||
Required properties for SPI bus usage:
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@ Required properties:
|
|||
- compatible: depending on the SoC this should be one of:
|
||||
- "amlogic,meson8-saradc" for Meson8
|
||||
- "amlogic,meson8b-saradc" for Meson8b
|
||||
- "amlogic,meson8m2-saradc" for Meson8m2
|
||||
- "amlogic,meson-gxbb-saradc" for GXBB
|
||||
- "amlogic,meson-gxl-saradc" for GXL
|
||||
- "amlogic,meson-gxm-saradc" for GXM
|
||||
|
|
|
|||
|
|
@ -21,6 +21,14 @@ Optional properties:
|
|||
- dmas: Phandle to dma channel for the ADC.
|
||||
- dma-names: Must be "rx" when dmas property is being used.
|
||||
See ../../dma/dma.txt for details.
|
||||
- #io-channel-cells: in case consumer drivers are attached, this must be 1.
|
||||
See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details.
|
||||
|
||||
Properties for consumer drivers:
|
||||
- Consumer drivers can be connected to this producer device, as specified
|
||||
in <Documentation/devicetree/bindings/iio/iio-bindings.txt>
|
||||
- Channels exposed are specified in:
|
||||
<dt-bindings/iio/adc/at91-sama5d2_adc.txt>
|
||||
|
||||
Example:
|
||||
|
||||
|
|
@ -38,4 +46,5 @@ adc: adc@fc030000 {
|
|||
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
|
||||
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
|
||||
dma-names = "rx";
|
||||
#io-channel-cells = <1>;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -8,11 +8,17 @@ Required properties:
|
|||
See Documentation/devicetree/bindings/gpio/gpio.txt
|
||||
- avdd-supply: Definition of the regulator used as analog supply
|
||||
|
||||
Optional properties:
|
||||
- clock-frequency: Frequency of PD_SCK in Hz
|
||||
Minimum value allowed is 10 kHz because of maximum
|
||||
high time of 50 microseconds.
|
||||
|
||||
Example:
|
||||
weight@0 {
|
||||
weight {
|
||||
compatible = "avia,hx711";
|
||||
sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
|
||||
dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
avdd-suppy = <&avdd>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ Required properties:
|
|||
|
||||
Example node:
|
||||
|
||||
ads1202: adc@0 {
|
||||
ads1202: adc {
|
||||
compatible = "sd-modulator";
|
||||
#io-channel-cells = <0>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,36 @@
|
|||
Spreadtrum SC27XX series PMICs ADC binding
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be one of the following.
|
||||
"sprd,sc2720-adc"
|
||||
"sprd,sc2721-adc"
|
||||
"sprd,sc2723-adc"
|
||||
"sprd,sc2730-adc"
|
||||
"sprd,sc2731-adc"
|
||||
- reg: The address offset of ADC controller.
|
||||
- interrupt-parent: The interrupt controller.
|
||||
- interrupts: The interrupt number for the ADC device.
|
||||
- #io-channel-cells: Number of cells in an IIO specifier.
|
||||
- hwlocks: Reference to a phandle of a hwlock provider node.
|
||||
|
||||
Example:
|
||||
|
||||
sc2731_pmic: pmic@0 {
|
||||
compatible = "sprd,sc2731";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <26000000>;
|
||||
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmic_adc: adc@480 {
|
||||
compatible = "sprd,sc2731-adc";
|
||||
reg = <0x480>;
|
||||
interrupt-parent = <&sc2731_pmic>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#io-channel-cells = <1>;
|
||||
hwlocks = <&hwlock 4>;
|
||||
};
|
||||
};
|
||||
78
Documentation/devicetree/bindings/iio/dac/ad5758.txt
Normal file
78
Documentation/devicetree/bindings/iio/dac/ad5758.txt
Normal file
|
|
@ -0,0 +1,78 @@
|
|||
Analog Devices AD5758 DAC device driver
|
||||
|
||||
Required properties for the AD5758:
|
||||
- compatible: Must be "adi,ad5758"
|
||||
- reg: SPI chip select number for the device
|
||||
- spi-max-frequency: Max SPI frequency to use (< 50000000)
|
||||
- spi-cpha: is the only mode that is supported
|
||||
|
||||
Required properties:
|
||||
|
||||
- adi,dc-dc-mode: Mode of operation of the dc-to-dc converter
|
||||
Dynamic Power Control (DPC)
|
||||
In this mode, the AD5758 circuitry senses the output
|
||||
voltage and dynamically regulates the supply voltage,
|
||||
VDPC+, to meet compliance requirements plus an optimized
|
||||
headroom voltage for the output buffer.
|
||||
|
||||
Programmable Power Control (PPC)
|
||||
In this mode, the VDPC+ voltage is user-programmable to
|
||||
a fixed level that needs to accommodate the maximum output
|
||||
load required.
|
||||
|
||||
The output of the DAC core is either converted to a
|
||||
current or voltage output at the VIOUT pin. Only one mode
|
||||
can be enabled at any one time.
|
||||
|
||||
The following values are currently supported:
|
||||
* 1: DPC current mode
|
||||
* 2: DPC voltage mode
|
||||
* 3: PPC current mode
|
||||
|
||||
Depending on the selected output mode (voltage or current) one of the
|
||||
two properties must
|
||||
be present:
|
||||
|
||||
- adi,range-microvolt: Voltage output range
|
||||
The array of voltage output ranges must contain two fields:
|
||||
* <0 5000000>: 0 V to 5 V voltage range
|
||||
* <0 10000000>: 0 V to 10 V voltage range
|
||||
* <(-5000000) 5000000>: ±5 V voltage range
|
||||
* <(-10000000) 10000000>: ±10 V voltage range
|
||||
- adi,range-microamp: Current output range
|
||||
The array of current output ranges must contain two fields:
|
||||
* <0 20000>: 0 mA to 20 mA current range
|
||||
* <0 24000>: 0 mA to 24 mA current range
|
||||
* <4 24000>: 4 mA to 20 mA current range
|
||||
* <(-20000) 20000>: ±20 mA current range
|
||||
* <(-24000) 24000>: ±24 mA current range
|
||||
* <(-1000) 22000>: −1 mA to +22 mA current range
|
||||
|
||||
Optional properties:
|
||||
|
||||
- adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit
|
||||
The following values are currently supported [uA]:
|
||||
* 150000
|
||||
* 200000
|
||||
* 250000
|
||||
* 300000
|
||||
* 350000
|
||||
* 400000
|
||||
|
||||
- adi,slew-time-us: The time it takes for the output to reach the
|
||||
full scale [uS]
|
||||
The supported range is between 133us up to 1023984375us
|
||||
|
||||
AD5758 Example:
|
||||
|
||||
dac@0 {
|
||||
compatible = "adi,ad5758";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpha;
|
||||
|
||||
adi,dc-dc-mode = <2>;
|
||||
adi,range-microvolt = <0 10000000>;
|
||||
adi,dc-dc-ilim-microamp = <200000>;
|
||||
adi,slew-time-us = <125000>;
|
||||
};
|
||||
|
|
@ -6,6 +6,7 @@ Required properties:
|
|||
- compatible : should be one of
|
||||
"invensense,mpu6050"
|
||||
"invensense,mpu6500"
|
||||
"invensense,mpu6515"
|
||||
"invensense,mpu9150"
|
||||
"invensense,mpu9250"
|
||||
"invensense,mpu9255"
|
||||
|
|
|
|||
13
Documentation/devicetree/bindings/iio/light/isl29501.txt
Normal file
13
Documentation/devicetree/bindings/iio/light/isl29501.txt
Normal file
|
|
@ -0,0 +1,13 @@
|
|||
* ISL29501 Time-of-flight sensor.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "renesas,isl29501"
|
||||
- reg : the I2C address of the sensor
|
||||
|
||||
Example:
|
||||
|
||||
isl29501@57 {
|
||||
compatible = "renesas,isl29501";
|
||||
reg = <0x57>;
|
||||
};
|
||||
|
|
@ -8,10 +8,6 @@ Required properties:
|
|||
"bosch,bme280"
|
||||
|
||||
Optional properties:
|
||||
- chip-id: configurable chip id for non-default chip revisions
|
||||
- temp-measurement-period: temperature measurement period (milliseconds)
|
||||
- default-oversampling: default oversampling value to be used at startup,
|
||||
value range is 0-3 with rising sensitivity.
|
||||
- interrupts: interrupt mapping for IRQ
|
||||
- reset-gpios: a GPIO line handling reset of the sensor: as the line is
|
||||
active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
|
||||
|
|
@ -23,9 +19,6 @@ Example:
|
|||
pressure@77 {
|
||||
compatible = "bosch,bmp085";
|
||||
reg = <0x77>;
|
||||
chip-id = <10>;
|
||||
temp-measurement-period = <100>;
|
||||
default-oversampling = <2>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
||||
reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
Before Width: | Height: | Size: 1.1 KiB After Width: | Height: | Size: 745 B |
|
|
@ -0,0 +1,30 @@
|
|||
Generic resistive touchscreen ADC
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: must be "resistive-adc-touch"
|
||||
The device must be connected to an ADC device that provides channels for
|
||||
position measurement and optional pressure.
|
||||
Refer to ../iio/iio-bindings.txt for details
|
||||
- iio-channels: must have at least two channels connected to an ADC device.
|
||||
These should correspond to the channels exposed by the ADC device and should
|
||||
have the right index as the ADC device registers them. These channels
|
||||
represent the relative position on the "x" and "y" axes.
|
||||
- iio-channel-names: must have all the channels' names. Mandatory channels
|
||||
are "x" and "y".
|
||||
|
||||
Optional properties:
|
||||
- iio-channels: The third channel named "pressure" is optional and can be
|
||||
used if the ADC device also measures pressure besides position.
|
||||
If this channel is missing, pressure will be ignored and the touchscreen
|
||||
will only report position.
|
||||
- iio-channel-names: optional channel named "pressure".
|
||||
|
||||
Example:
|
||||
|
||||
resistive_touch: resistive_touch {
|
||||
compatible = "resistive-adc-touch";
|
||||
touchscreen-min-pressure = <50000>;
|
||||
io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
|
||||
io-channel-names = "x", "y", "pressure";
|
||||
};
|
||||
|
|
@ -7,6 +7,9 @@ Optional properties for Touchscreens:
|
|||
(in pixels)
|
||||
- touchscreen-max-pressure : maximum reported pressure (arbitrary range
|
||||
dependent on the controller)
|
||||
- touchscreen-min-pressure : minimum pressure on the touchscreen to be
|
||||
achieved in order for the touchscreen
|
||||
driver to report a touch event.
|
||||
- touchscreen-fuzz-x : horizontal noise value of the absolute input
|
||||
device (in pixels)
|
||||
- touchscreen-fuzz-y : vertical noise value of the absolute input
|
||||
|
|
|
|||
Loading…
Reference in a new issue