A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-29 11:11:45 -04:00
Code Issues Projects Releases Packages Wiki Activity

pinctrl: cherryview: Configure HiZ pins to be input when requested as GPIOs

Browse source 
If the pin is in HiZ mode when it is requested as GPIO its value cannot be
read (it always returns 0). In order to cope with the Linux GPIO subsystem
where we do not have such state at all, turn the pin to be input instead.

Reported-by: Jerome Blin <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
This commit is contained in:
Mika Westerberg 2015-01-29 12:44:48 +02:00 • committed by Linus Walleij
commit 2479c7300e
1 changed files with 15 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

17
drivers/pinctrl/intel/pinctrl-cherryview.c
View file

@ -880,9 +880,22 @@ static int chv_gpio_request_enable(struct pinctrl_dev *pctldev,
value &= ~CHV_PADCTRL1_INVRXTX_MASK;
chv_writel(value, reg);
/* Switch to a GPIO mode */
reg = chv_padreg(pctrl, offset, CHV_PADCTRL0);
value = readl(reg) | CHV_PADCTRL0_GPIOEN;
value = readl(reg);
/*
* If the pin is in HiZ mode (both TX and RX buffers are
* disabled) we turn it to be input now.
*/
if ((value & CHV_PADCTRL0_GPIOCFG_MASK) ==
(CHV_PADCTRL0_GPIOCFG_HIZ << CHV_PADCTRL0_GPIOCFG_SHIFT)) {
value &= ~CHV_PADCTRL0_GPIOCFG_MASK;
value |= CHV_PADCTRL0_GPIOCFG_GPI <<
CHV_PADCTRL0_GPIOCFG_SHIFT;
}
/* Switch to a GPIO mode */
value |= CHV_PADCTRL0_GPIOEN;
chv_writel(value, reg);
}