Merge tag 'MMI-U1UGS34.23-110-23-2' of https://github.com/MotorolaMobilityLLC/kernel-camera-devicetree into lineage-22.2

Fogos push for Android 14

* tag 'MMI-U1UGS34.23-110-23-2' of https://github.com/MotorolaMobilityLLC/kernel-camera-devicetree: (183 commits)
  fogos: Actuator noise reduction[1/2]
  fogor: Modify mclk for s5k4h7
  fogor: Actuator noise reduction[1/2]
  camera-devicetree: add init file for fogos bringup
  fogo: Bring up eeprom of main camera[1/2]
  fogo: Bring up flash[1/3]
  fogo: Bring up s5k4h7 otp[2/2]
  fogo: Bring up macro sc202acs otp
  fogo: Bring up actuator of main camera[1/2]
  fogo: Bring up front s5k4h7[2/2]
  fogo: Bring up macro sc202acs
  fogo: Bring up main s5kjns
  fogo: Setup camera driver baseline[2/3]
  fogor: Update the power pins of avdd
  fogor: Bring up eeprom of macro sc202acs
  fogor: Bring up flash[2/2]
  fogor: Bring up eeprom of front camera[2/2]
  fogor: Bring up eeprom of main camera[1/2]
  fogor: Bring up actuator of main camera[1/2]
  fogor: Bring up macro sc202acs
  ...

Change-Id: Ie6b083e7d9b99052d897af385cb1c6c48586124f

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-flash-pwm.dtsi

@@ -0,0 +1,22 @@
+&pm6125_gpios {
+    camera_flash_pwm {
+        camera_flash_pwm_default: camera_flash_pwm_default {
+            pins = "gpio8";
+            function = "func1";
+            input-disable; /* No PULL */
+            output-low;
+            bias-disable;
+            power-source = <0>;
+            drive-strength = <3>;
+        };
+    };
+};
+
+&soc {
+    pm6125_flash_gpio:pm6125_flash_gpio {
+        compatible = "qualcomm,pm6125_flash_gpio";
+        pinctrl-names = "camera_flash_pwm_default";
+        pinctrl-0 = <&camera_flash_pwm_default>;
+        pwms = <&pm6125_pwm 0 0>;
+    };
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-corfup-overlay.dtsi

@@ -0,0 +1,590 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_depth_reset_active: cam_sensor_macro_depth_reset_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_depth_reset_suspend: cam_sensor_macro_depth_reset_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+	cam_macro_avdd_en_default: cam_macro_avdd_en_default {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-disable; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+	cam_macro_avdd: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_macro_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 38 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_macro_avdd_en_default>;
+	};
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		cci-master = <1>;
+		status = "ok"
+                multi-user-support;
+	};
+
+       eeprom_main: qcom,eeprom@0 {
+                cell-index = <0>;
+                reg = <0x0>;
+                compatible = "qcom,eeprom";
+                cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+                regulator-names = "cam_vio";
+                rgltr-cntrl-support;
+                rgltr-min-voltage = <1800000>;
+                rgltr-max-voltage = <1800000>;
+                rgltr-load-current = <120000>;
+                cci-master = <1>;
+                status = "ok"
+        };
+
+	sensor_main: qcom,cam-sensor@0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_rear>;
+		eeprom-src = <&eeprom_main>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo6_vddois>;
+		cam_vdig-supply = <&cam_pmic2_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+                cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RM_RST";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+        // front camera
+        eeprom_front: qcom,eeprom@1 {
+                cell-index = <1>;
+                reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+	sensor_front: qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+                eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo3_avdd1>;
+		cam_vdig-supply = <&cam_pmic1_ldo1_dvdd1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1100000 0>;
+		rgltr-max-voltage = <1800000 2800000 1100000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_FW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	// ROW/PRC: macro OV02B10; JP: depth OV02B1B;5G: macro GC02M1
+	eeprom_macro: qcom,eeprom@2 {
+                cell-index = <2>;
+                reg = <0x2>;
+                compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_macro_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_macro_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RD_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	sensor_macro: qcom,cam-sensor@2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+                eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_macro_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_macro_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RD_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	eeprom_wide: qcom,eeprom@3 {
+		cell-index = <3>;
+                reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	sensor_wide: qcom,cam-sensor@3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+                eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-cypfr-overlay.dtsi

@@ -0,0 +1,575 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_wide_dvdd_en_default: cam_wide_dvdd_en_default {
+		mux {
+			pins = "gpio134";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio134";
+			bias-disable; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+
+	cam_wide_dvdd: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_wide_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 134 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_wide_dvdd_en_default>;
+		vin-supply = <&S6A>;
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok"
+		multi-user-support;
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_main: qcom,eeprom0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vaf-supply = <&cam_ldo5>;
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vaf", "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000 1800000>;
+		rgltr-max-voltage = <2800000 1800000>;
+		rgltr-load-current = <100000 120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_rear>;
+		eeprom-src = <&eeprom_main>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom2 {
+		cell-index = <2>;
+                reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_front: qcom,eeprom1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo3>;
+		cam_vdig-supply = <&cam_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET1";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_macro: qcom,eeprom3 {
+		cell-index = <3>;
+                reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000  0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+		eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000  0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-fogo-overlay.dtsi

@@ -0,0 +1,610 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+/*s5k4h7 dvdd*/
+&L3A{
+    regulator-min-microvolt = <1200000>;
+    regulator-max-microvolt = <1200000>;
+    qcom,init-voltage = <1200000>;
+    status = "okay";
+};
+
+/*s5kjns afvdd*/
+&L21A{
+    regulator-min-microvolt = <2800000>;
+    regulator-max-microvolt = <2800000>;
+    qcom,init-voltage = <2800000>;
+    status = "okay";
+};
+
+&tlmm {
+    cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+        mux {
+            pins = "gpio29";
+            function = "cam_mclk";
+        };
+
+        config {
+            pins = "gpio29";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+    cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+        mux {
+            pins = "gpio29";
+            function = "cam_mclk";
+        };
+
+        config {
+            pins = "gpio29";
+            bias-pull-down; /* PULL DOWN */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+    cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+        mux {
+            pins = "gpio30";
+            function = "cam_mclk";
+        };
+
+        config {
+            pins = "gpio30";
+            bias-disable; /* No PULL */
+            drive-strength = <2>;
+        };
+    };
+
+    cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+        mux {
+            pins = "gpio30";
+            function = "cam_mclk";
+        };
+
+        config {
+            pins = "gpio30";
+            bias-pull-down; /* PULL DOWN */
+            drive-strength = <2>;
+        };
+    };
+
+    cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+        mux {
+            pins = "gpio31";
+            function = "cam_mclk";
+        };
+
+        config {
+            pins = "gpio31";
+            bias-disable; /* No PULL */
+            drive-strength = <2>;
+        };
+    };
+
+    cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+        mux {
+            pins = "gpio31";
+            function = "cam_mclk";
+        };
+
+        config {
+            pins = "gpio31";
+            bias-pull-down; /* PULL DOWN */
+            drive-strength = <2>;
+        };
+    };
+
+    cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+        mux {
+            pins = "gpio35";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio35";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+    cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+        mux {
+            pins = "gpio35";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio35";
+            bias-pull-down; /* PULL DOWN */
+            drive-strength = <2>; /* 2 MA */
+            output-low;
+        };
+    };
+
+    cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+        mux {
+            pins = "gpio34";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio34";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+    cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+        mux {
+            pins = "gpio34";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio34";
+            bias-pull-down; /* PULL DOWN */
+            drive-strength = <2>; /* 2 MA */
+            output-low;
+        };
+    };
+
+    cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+        mux {
+            pins = "gpio37";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio37";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+    cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+        mux {
+            pins = "gpio37";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio37";
+            bias-pull-down; /* PULL DOWN */
+            drive-strength = <2>; /* 2 MA */
+            output-low;
+        };
+    };
+
+    camera_ldo_iovdd_en: camera_ldo_iovdd_en {
+        mux {
+            pins = "gpio33";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio33";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+  /* s5kjns avdd enable */
+    camera_ldo_50m_avdd_en: camera_ldo_50m_avdd_en {
+        mux {
+            pins = "gpio36";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio36";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+  /* s5kjns dvdd enable */
+    camera_ldo_50m_dvdd_en: camera_ldo_50m_dvdd_en {
+        mux {
+            pins = "gpio49";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio49";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+  /*s5k4h7 avdd enable*/
+    camera_ldo_8m_avdd_en: camera_ldo_8m_avdd_en {
+        mux {
+            pins = "gpio38";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio38";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+    /*sc202acs AVDD enable*/
+    camera_ldo_2m_avdd_en: camera_ldo_2m_avdd_en {
+        mux {
+            pins = "gpio51";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio51";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+    flash_ldo_torch_en: flash_ldo_torch_en {
+        mux {
+            pins = "gpio24";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio24";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+
+    flash_ldo_tx_en: flash_ldo_tx_en {
+        mux {
+            pins = "gpio97";
+            function = "gpio";
+        };
+
+        config {
+            pins = "gpio97";
+            bias-disable; /* No PULL */
+            drive-strength = <2>; /* 2 MA */
+        };
+    };
+};
+
+&soc {
+    /*s5kjns s5k4h7 sc202acs iovdd*/
+    camera_ldo_iovdd: gpio-regulator@0 {
+        compatible = "regulator-fixed";
+        reg = <0x00 0x00>;
+        regulator-name = "camera_ldo_iovdd";
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+        regulator-enable-ramp-delay = <233>;
+        enable-active-high;
+        gpio = <&tlmm 33 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&camera_ldo_iovdd_en>;
+    };
+
+    /*s5kjns avdd*/
+    camera_ldo_50m_avdd: gpio-regulator@1 {
+        compatible = "regulator-fixed";
+        reg = <0x01 0x00>;
+        regulator-name = "camera_ldo_50m_avdd";
+        regulator-min-microvolt = <2800000>;
+        regulator-max-microvolt = <2800000>;
+        regulator-enable-ramp-delay = <233>;
+        enable-active-high;
+        gpio = <&tlmm 36 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&camera_ldo_50m_avdd_en>;
+    };
+
+    /*s5kjns dvdd*/
+    camera_ldo_50m_dvdd: gpio-regulator@2 {
+        compatible = "regulator-fixed";
+        reg = <0x02 0x00>;
+        regulator-name = "camera_ldo_50m_dvdd";
+        regulator-min-microvolt = <1050000>;
+        regulator-max-microvolt = <1050000>;
+        regulator-enable-ramp-delay = <233>;
+        enable-active-high;
+        gpio = <&tlmm 49 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&camera_ldo_50m_dvdd_en>;
+    };
+
+    /*sc202acs avdd*/
+    camera_ldo_2m_avdd: gpio-regulator@3 {
+        compatible = "regulator-fixed";
+        reg = <0x03 0x00>;
+        regulator-name = "camera_ldo_2m_avdd";
+        regulator-min-microvolt = <2800000>;
+        regulator-max-microvolt = <2800000>;
+        regulator-enable-ramp-delay = <233>;
+        enable-active-high;
+        gpio = <&tlmm 51 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&camera_ldo_2m_avdd_en>;
+    };
+
+    /*s5k4h7 avdd*/
+    camera_ldo_8m_avdd: gpio-regulator@4 {
+        compatible = "regulator-fixed";
+        reg = <0x04 0x00>;
+        regulator-name = "camera_ldo_8m_avdd";
+        regulator-min-microvolt = <2800000>;
+        regulator-max-microvolt = <2800000>;
+        regulator-enable-ramp-delay = <233>;
+        enable-active-high;
+        gpio = <&tlmm 38 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&camera_ldo_8m_avdd_en>;
+    };
+
+    flash_ldo_torch: gpio-regulator@5 {
+        compatible = "regulator-fixed";
+        reg = <0x05 0x00>;
+        regulator-name = "flash_ldo_torch";
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+        regulator-enable-ramp-delay = <233>;
+        enable-active-high;
+        gpio = <&tlmm 24 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&flash_ldo_torch_en>;
+    };
+
+    flash_ldo_tx: gpio-regulator@6 {
+        compatible = "regulator-fixed";
+        reg = <0x06 0x00>;
+        regulator-name = "flash_ldo_tx";
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+        regulator-enable-ramp-delay = <233>;
+        enable-active-high;
+        gpio = <&tlmm 97 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&flash_ldo_tx_en>;
+    };
+
+    qcom,cam-res-mgr {
+        compatible = "qcom,cam-res-mgr";
+        status = "ok"
+    };
+};
+
+&cam_cci0 {
+    /* Rear 50M AF */
+    actuator_rear_main: qcom,actuator@0{
+        cell-index = <0>;
+        compatible = "qcom,actuator";
+        cci-master = <0>;
+        cam_vaf-supply = <&L21A>;
+        regulator-names = "cam_vaf";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <2800000>;
+        rgltr-max-voltage = <2800000>;
+        rgltr-load-current = <103000>;
+        status = "ok"
+    };
+
+    /* Rear s5kjns eeprom */
+    eeprom_rear: qcom,eeprom@0 {
+        cell-index = <0>;
+        reg = <0x0>;
+        compatible = "qcom,eeprom";
+        cam_vio-supply = <&camera_ldo_iovdd>;
+        regulator-names = "cam_vio";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <1800000>;
+        rgltr-max-voltage = <1800000>;
+        rgltr-load-current = <120000>;
+        cci-master = <0>;
+        status = "ok"
+    };
+
+    /*Macro sc202acs eeprom*/
+    eeprom_macro: qcom,eeprom@2 {
+        cell-index = <2>;
+        reg = <0x2>;
+        compatible = "qcom,eeprom";
+        cam_vio-supply = <&camera_ldo_iovdd>;
+        cam_vana-supply = <&camera_ldo_2m_avdd>;
+        cam_clk-supply = <&gcc_camss_top_gdsc>;
+        regulator-names = "cam_vio", "cam_vana","cam_clk";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <1800000 2800000 0>;
+        rgltr-max-voltage = <1800000 2800000 0>;
+        rgltr-load-current = <120000 80000 0>;
+        gpio-no-mux = <0>;
+        pinctrl-names = "cam_default", "cam_suspend";
+        pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_macro_reset_active>;
+        pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_macro_reset_suspend>;
+        gpios = <&tlmm 31 0>, <&tlmm 37 0>;
+        gpio-reset = <1>;
+        gpio-req-tbl-num = <0 1>;
+        gpio-req-tbl-flags = <1 0>;
+        gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET3";
+        cci-master = <1>;
+        status = "ok"
+        clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+        clock-names = "cam_clk";
+        clock-cntl-level = "turbo";
+        clock-rates = <24000000>;
+    };
+
+    /* Rear s5kjns FLASH */
+    led_flash_rear: qcom,camera-flash@0 {
+        cell-index = <0>;
+        reg = <0x0>;
+        compatible = "qcom,camera-flash";
+        flash-type = <CAM_FLASH_TYPE_I2C>;
+        cam_vio-supply = <&camera_ldo_iovdd>;
+        regulator-names = "cam_vio";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <1800000>;
+        rgltr-max-voltage = <1800000>;
+        rgltr-load-current = <100000>;
+        cci-master = <1>;
+        status = "ok"
+    };
+
+    /* MACRO sc202acs FLASH */
+    led_flash_macro: qcom,camera-flash@1 {
+        cell-index = <1>;
+        reg = <0x1>;
+        compatible = "qcom,camera-flash";
+        flash-type = <CAM_FLASH_TYPE_I2C>;
+        cam_vio-supply = <&camera_ldo_iovdd>;
+        regulator-names = "cam_vio";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <1800000>;
+        rgltr-max-voltage = <1800000>;
+        rgltr-load-current = <100000>;
+        cci-master = <1>;
+        status = "ok"
+    };
+
+    /* Rear s5kjns */
+    rear_main: qcom,cam-sensor@0 {
+        cell-index = <0>;
+        compatible = "qcom,cam-sensor";
+        csiphy-sd-index = <0>;
+        sensor-position-roll = <90>;
+        sensor-position-pitch = <0>;
+        sensor-position-yaw = <180>;
+        actuator-src = <&actuator_rear_main>;
+        led-flash-src = <&led_flash_rear>;
+        eeprom-src = <&eeprom_rear>;
+        cam_vio-supply = <&camera_ldo_iovdd>;
+        cam_vana-supply = <&camera_ldo_50m_avdd>;
+        cam_vdig-supply = <&camera_ldo_50m_dvdd>;
+        cam_clk-supply = <&gcc_camss_top_gdsc>;
+        regulator-names ="cam_vio", "cam_vana", "cam_vdig", "cam_clk";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <1800000 2800000 1050000 0>;
+        rgltr-max-voltage = <1800000 2800000 1050000 0>;
+        rgltr-load-current = <120000 80000 1200000 0>;
+        gpio-no-mux = <0>;
+        pinctrl-names = "cam_default", "cam_suspend";
+        pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_main_reset_active>;
+        pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_main_reset_suspend>;
+        gpios = <&tlmm 29 0>, <&tlmm 35 0>;
+        gpio-reset = <1>;
+        gpio-req-tbl-num = <0 1>;
+        gpio-req-tbl-flags = <1 0>;
+        gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET1";
+        cci-master = <0>;
+        status = "ok"
+        clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+        clock-names = "cam_clk";
+        clock-cntl-level = "turbo";
+        clock-rates = <24000000>;
+    };
+
+    /*Macro  sc202acs*/
+    qcom,cam-sensor2 {
+        cell-index = <2>;
+        compatible = "qcom,cam-sensor";
+        csiphy-sd-index = <2>;
+        sensor-position-roll = <90>;
+        sensor-position-pitch = <0>;
+        sensor-position-yaw = <180>;
+        eeprom-src = <&eeprom_macro>;
+        led-flash-src = <&led_flash_macro>;
+        cam_vio-supply = <&camera_ldo_iovdd>;
+        cam_vana-supply = <&camera_ldo_2m_avdd>;
+        cam_clk-supply = <&gcc_camss_top_gdsc>;
+        regulator-names = "cam_vio", "cam_vana", "cam_clk";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <1800000 2800000 0>;
+        rgltr-max-voltage = <1800000 2800000 0>;
+        rgltr-load-current = <120000 80000 0>;
+        gpio-no-mux = <0>;
+        pinctrl-names = "cam_default", "cam_suspend";
+        pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_macro_reset_active>;
+        pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_macro_reset_suspend>;
+        gpios = <&tlmm 31 0>, <&tlmm 37 0>;
+        gpio-reset = <1>;
+        gpio-req-tbl-num = <0 1 >;
+        gpio-req-tbl-flags = <1 0 >;
+        gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET3";
+        cci-master = <1>;
+        status = "ok"
+        clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+        clock-names = "cam_clk";
+        clock-cntl-level = "turbo";
+        clock-rates = <24000000>;
+    };
+};
+
+&cam_cci1 {
+    /*Front s5k4h7 otp*/
+    eeprom_front: qcom,eeprom@1 {
+        cell-index = <1>;
+        reg = <0x1>;
+        compatible = "qcom,eeprom";
+        cam_vio-supply = <&camera_ldo_iovdd>;
+        cam_vana-supply = <&camera_ldo_8m_avdd>;
+        cam_vdig-supply = <&L3A>;
+        cam_clk-supply = <&gcc_camss_top_gdsc>;
+        regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <1800000 2800000 1200000 0>;
+        rgltr-max-voltage = <1800000 2800000 1200000 0>;
+        rgltr-load-current = <120000 80000 1200000 0>;
+        gpio-no-mux = <0>;
+        pinctrl-names = "cam_default", "cam_suspend";
+        pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_reset_active>;
+        pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_reset_suspend>;
+        gpios = <&tlmm 30 0>, <&tlmm 34 0>;
+        gpio-reset = <1>;
+        gpio-req-tbl-num = <0 1 >;
+        gpio-req-tbl-flags = <1 0 >;
+        gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET0";
+        cci-master = <0>;
+        status = "ok"
+        clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+        clock-names = "cam_clk";
+        clock-cntl-level = "turbo";
+        clock-rates = <24000000>;
+    };
+
+    /*Front s5k4h7*/
+    front_main: qcom,cam-sensor@1 {
+        cell-index = <1>;
+        compatible = "qcom,cam-sensor";
+        csiphy-sd-index = <3>;
+        sensor-position-roll = <270>;
+        sensor-position-pitch = <0>;
+        sensor-position-yaw = <0>;
+        eeprom-src = <&eeprom_front>;
+        cam_vio-supply = <&camera_ldo_iovdd>;
+        cam_vana-supply = <&camera_ldo_8m_avdd>;
+        cam_vdig-supply = <&L3A>;
+        cam_clk-supply = <&gcc_camss_top_gdsc>;
+        regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";
+        rgltr-cntrl-support;
+        rgltr-min-voltage = <1800000 2800000 1200000 0>;
+        rgltr-max-voltage = <1800000 2800000 1200000 0>;
+        rgltr-load-current = <120000 80000 1200000 0>;
+        gpio-no-mux = <0>;
+        pinctrl-names = "cam_default", "cam_suspend";
+        pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_reset_active>;
+        pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_reset_suspend>;
+        gpios = <&tlmm 30 0>, <&tlmm 34 0>;
+        gpio-reset = <1>;
+        gpio-req-tbl-num = <0 1 >;
+        gpio-req-tbl-flags = <1 0 >;
+        gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET0";
+        cci-master = <0>;
+        status = "ok"
+        clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+        clock-names = "cam_clk";
+        clock-cntl-level = "turbo";
+        clock-rates = <24000000>;
+    };
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-fogor-overlay.dtsi

@@ -0,0 +1,568 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&pm6125_gpios {
+  camera_ldo_50m_afvdd_en: camera_ldo_50m_afvdd_en {
+    pins = "gpio5";
+    function = "normal";
+    input-disable;
+    output-enable;
+    bias-pull-down; /* PULL DOWN */
+    power-source = <0>; /* 1.8V */
+    qcom,drive-strength = <2>; /* Medium */
+  };
+};
+
+/*s5kjns s5k4h7 sc202acs iovdd*/
+&L13A{
+  regulator-min-microvolt = <1800000>;
+  regulator-max-microvolt = <1800000>;
+  qcom,init-voltage = <1800000>;
+  status = "okay";
+};
+
+/*s5kjns dvdd*/
+&L3A{
+  regulator-min-microvolt = <1050000>;
+  regulator-max-microvolt = <1050000>;
+  qcom,init-voltage = <1050000>;
+  status = "okay";
+};
+
+&soc {
+  /*s5kjns avdd*/
+  camera_ldo_50m_avdd: gpio-regulator@0 {
+    compatible = "regulator-fixed";
+    reg = <0x00 0x00>;
+    regulator-name = "camera_ldo_50m_avdd";
+    regulator-min-microvolt = <2800000>;
+    regulator-max-microvolt = <2800000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&tlmm 8 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&camera_ldo_50m_avdd_en>;
+  };
+
+  /*s5k4h7 dvdd*/
+  camera_ldo_8m_dvdd: gpio-regulator@1 {
+    compatible = "regulator-fixed";
+    reg = <0x01 0x00>;
+    regulator-name = "camera_ldo_8m_dvdd";
+    regulator-min-microvolt = <1200000>;
+    regulator-max-microvolt = <1200000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&tlmm 6 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&camera_ldo_8m_dvdd_en>;
+  };
+
+  camera_ldo_50m_afvdd: gpio-regulator@2 {
+    compatible = "regulator-fixed";
+    reg = <0x02 0x00>;
+    regulator-name = "camera_ldo_50m_afvdd";
+    regulator-min-microvolt = <2800000>;
+    regulator-max-microvolt = <2800000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&pm6125_gpios 5 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&camera_ldo_50m_afvdd_en>;
+  };
+
+  flash_ldo_dovdd: gpio-regulator@3 {
+    compatible = "regulator-fixed";
+    reg = <0x03 0x00>;
+    regulator-name = "flash_ldo_dovdd";
+    regulator-min-microvolt = <1800000>;
+    regulator-max-microvolt = <1800000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&tlmm 24 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&flash_ldo_dovdd_en>;
+  };
+
+  camera_ldo_8m_avdd: gpio-regulator@4 {
+    compatible = "regulator-fixed";
+    reg = <0x04 0x00>;
+    regulator-name = "camera_ldo_8m_avdd";
+    regulator-min-microvolt = <2800000>;
+    regulator-max-microvolt = <2800000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&tlmm 38 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&camera_ldo_8m_avdd_en>;
+  };
+
+  qcom,cam-res-mgr {
+    compatible = "qcom,cam-res-mgr";
+    status = "ok"
+  };
+
+  mot,cam-actuator {
+    compatible = "mot,actuator";
+    status = "ok"
+  };
+};
+
+&tlmm {
+  flash_ldo_dovdd_en: flash_ldo_dovdd_en {
+    mux {
+      pins = "gpio24";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio24";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+    mux {
+      pins = "gpio29";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio29";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+    mux {
+      pins = "gpio29";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio29";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+    mux {
+      pins = "gpio30";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio30";
+      bias-disable; /* No PULL */
+      drive-strength = <4>; /* 4 MA */
+    };
+  };
+
+  cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+    mux {
+      pins = "gpio30";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio30";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <4>; /* 4 MA */
+    };
+  };
+
+  cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+    mux {
+      pins = "gpio31";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio31";
+      bias-disable; /* No PULL */
+      drive-strength = <2>;
+    };
+  };
+
+  cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+    mux {
+      pins = "gpio31";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio31";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>;
+    };
+  };
+
+  cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+    mux {
+      pins = "gpio35";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio35";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+    mux {
+      pins = "gpio35";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio35";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>; /* 2 MA */
+      output-low;
+    };
+  };
+  cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+    mux {
+      pins = "gpio37";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio37";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+    mux {
+      pins = "gpio37";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio37";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>; /* 2 MA */
+      output-low;
+    };
+  };
+  cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+    mux {
+      pins = "gpio34";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio34";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+    mux {
+      pins = "gpio34";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio34";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>; /* 2 MA */
+      output-low;
+    };
+  };
+
+/* s5kjns avdd enable */
+  camera_ldo_50m_avdd_en: camera_ldo_50m_avdd_en {
+    mux {
+      pins = "gpio8";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio8";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  camera_ldo_8m_avdd_en: camera_ldo_8m_avdd_en {
+    mux {
+      pins = "gpio38";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio38";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+/* s5k4h7 dvdd enable */
+  camera_ldo_8m_dvdd_en: camera_ldo_8m_dvdd_en {
+    mux {
+      pins = "gpio6";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio6";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+};
+
+&cam_cci0 {
+  /* Rear 50M AF */
+  actuator_rear_main: qcom,actuator@0{
+    cell-index = <0>;
+    compatible = "qcom,actuator";
+    cci-master = <0>;
+    cam_vaf-supply = <&camera_ldo_50m_afvdd>;
+    regulator-names = "cam_vaf";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <2800000>;
+    rgltr-max-voltage = <2800000>;
+    rgltr-load-current = <103000>;
+    status = "ok"
+    multi-user-support;
+  };
+
+
+  /* Rear s5kjns FLASH */
+  led_flash_rear: qcom,camera-flash@0 {
+    cell-index = <0>;
+    reg = <0x0>;
+    compatible = "qcom,camera-flash";
+    flash-type = <CAM_FLASH_TYPE_I2C>;
+    cam_vio-supply = <&L13A>;
+    cam_v_custom2-supply = <&flash_ldo_dovdd>;
+    regulator-names = "cam_vio","cam_v_custom2";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 1800000>;
+    rgltr-max-voltage = <1800000 1800000>;
+    rgltr-load-current = <100000 120000>;
+    distinguish-flash-supplier = <0xc6 0x0c 0x3a>;
+    cci-master = <1>;
+    status = "ok"
+  };
+
+  /* MACRO sc202acs FLASH */
+  led_flash_macro: qcom,camera-flash@2 {
+    cell-index = <2>;
+    reg = <0x2>;
+    compatible = "qcom,camera-flash";
+    flash-type = <CAM_FLASH_TYPE_I2C>;
+    cam_vio-supply = <&L13A>;
+    cam_v_custom2-supply = <&flash_ldo_dovdd>;
+    regulator-names = "cam_vio","cam_v_custom2";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 1800000>;
+    rgltr-max-voltage = <1800000 1800000>;
+    rgltr-load-current = <100000 120000>;
+    distinguish-flash-supplier = <0xc6 0x0c 0x3a>;
+    cci-master = <1>;
+    status = "ok"
+  };
+
+  /* Rear s5kjns eeprom */
+  eeprom_rear: qcom,eeprom@0 {
+    cell-index = <0>;
+    reg = <0x0>;
+    compatible = "qcom,eeprom";
+    cam_vio-supply = <&L13A>;
+    regulator-names = "cam_vio";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000>;
+    rgltr-max-voltage = <1800000>;
+    rgltr-load-current = <120000>;
+    cci-master = <0>;
+    status = "ok"
+  };
+
+  /* Rear sc202acs eeprom */
+  eeprom_macro: qcom,eeprom@2 {
+    cell-index = <2>;
+    reg = <0x2>;
+    compatible = "qcom,eeprom";
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_8m_avdd>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    regulator-names = "cam_vio", "cam_vana", "cam_clk";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 2800000 0>;
+    rgltr-max-voltage = <1800000 2800000 0>;
+    rgltr-load-current = <120000 80000 0>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_macro_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_macro_reset_suspend>;
+    gpios = <&tlmm 31 0>, <&tlmm 37 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1 >;
+    gpio-req-tbl-flags = <1 0 >;
+    gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET3";
+    sensor-mode = <0>;
+    cci-master = <1>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+
+  /* Rear s5kjns */
+  rear_main: qcom,cam-sensor@0 {
+    cell-index = <0>;
+    compatible = "qcom,cam-sensor";
+    csiphy-sd-index = <1>;
+    sensor-position-roll = <90>;
+    sensor-position-pitch = <0>;
+    sensor-position-yaw = <180>;
+    actuator-src = <&actuator_rear_main>;
+    eeprom-src = <&eeprom_rear>;
+    led-flash-src = <&led_flash_rear>;
+    cam_v_custom2-supply = <&flash_ldo_dovdd>;
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_50m_avdd>;
+    cam_vdig-supply = <&L3A>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    cam_vaf-supply = <&camera_ldo_50m_afvdd>;
+    regulator-names ="cam_v_custom2", "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 1800000 2800000 1050000 0 2800000>;
+    rgltr-max-voltage = <1800000 1800000 2800000 1050000 0 2800000>;
+    rgltr-load-current = <120000 120000 80000 1200000 0 103000>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_main_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_main_reset_suspend>;
+    gpios = <&tlmm 29 0>, <&tlmm 35 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1>;
+    gpio-req-tbl-flags = <1 0>;
+    gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET1";
+    cci-master = <0>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+
+  /* Rear sc202acs */
+  rear_macro: qcom,cam-sensor@2 {
+    cell-index = <2>;
+    compatible = "qcom,cam-sensor";
+    csiphy-sd-index = <2>;
+    sensor-position-roll = <90>;
+    sensor-position-pitch = <0>;
+    sensor-position-yaw = <180>;
+    eeprom-src = <&eeprom_macro>;
+    led-flash-src = <&led_flash_macro>;
+    cam_v_custom2-supply = <&flash_ldo_dovdd>;
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_8m_avdd>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    regulator-names = "cam_v_custom2", "cam_vio", "cam_vana", "cam_clk";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 1800000 2800000 0>;
+    rgltr-max-voltage = <1800000 1800000 2800000 0>;
+    rgltr-load-current = <120000 120000 80000 0>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_macro_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_macro_reset_suspend>;
+    gpios = <&tlmm 31 0>, <&tlmm 37 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1 >;
+    gpio-req-tbl-flags = <1 0 >;
+    gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET3";
+    sensor-mode = <0>;
+    cci-master = <1>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+};
+
+&cam_cci1 {
+  /* Front s5k4h7 otp */
+  eeprom_front: qcom,eeprom@1 {
+    cell-index = <1>;
+    reg = <0x1>;
+    compatible = "qcom,eeprom";
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_8m_avdd>;
+    cam_vdig-supply = <&camera_ldo_8m_dvdd>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 2800000 1200000 0>;
+    rgltr-max-voltage = <1800000 2800000 1200000 0>;
+    rgltr-load-current = <120000 80000 1200000 0>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_reset_suspend>;
+    gpios = <&tlmm 30 0>, <&tlmm 34 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1 >;
+    gpio-req-tbl-flags = <1 0 >;
+    gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET0";
+    sensor-mode = <1>;
+    cci-master = <0>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+
+  /*Front s5k4h7*/
+  front_main: qcom,cam-sensor@1 {
+    cell-index = <1>;
+    compatible = "qcom,cam-sensor";
+    csiphy-sd-index = <3>;
+    sensor-position-roll = <270>;
+    sensor-position-pitch = <0>;
+    sensor-position-yaw = <0>;
+    eeprom-src = <&eeprom_front>;
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_8m_avdd>;
+    cam_vdig-supply = <&camera_ldo_8m_dvdd>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 2800000 1200000 0>;
+    rgltr-max-voltage = <1800000 2800000 1200000 0>;
+    rgltr-load-current = <120000 80000 1200000 0>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_reset_suspend>;
+    gpios = <&tlmm 30 0>, <&tlmm 34 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1 >;
+    gpio-req-tbl-flags = <1 0 >;
+    gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET0";
+    sensor-mode = <1>;
+    cci-master = <0>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-fogos-overlay.dtsi

@@ -0,0 +1,568 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&pm6125_gpios {
+  camera_ldo_50m_afvdd_en: camera_ldo_50m_afvdd_en {
+    pins = "gpio5";
+    function = "normal";
+    input-disable;
+    output-enable;
+    bias-pull-down; /* PULL DOWN */
+    power-source = <0>; /* 1.8V */
+    qcom,drive-strength = <2>; /* Medium */
+  };
+};
+
+/*s5kjns s5k4h7 sc202acs iovdd*/
+&L13A{
+  regulator-min-microvolt = <1800000>;
+  regulator-max-microvolt = <1800000>;
+  qcom,init-voltage = <1800000>;
+  status = "okay";
+};
+
+/*s5kjns dvdd*/
+&L3A{
+  regulator-min-microvolt = <1050000>;
+  regulator-max-microvolt = <1050000>;
+  qcom,init-voltage = <1050000>;
+  status = "okay";
+};
+
+&soc {
+  /*s5kjns avdd*/
+  camera_ldo_50m_avdd: gpio-regulator@0 {
+    compatible = "regulator-fixed";
+    reg = <0x00 0x00>;
+    regulator-name = "camera_ldo_50m_avdd";
+    regulator-min-microvolt = <2800000>;
+    regulator-max-microvolt = <2800000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&tlmm 8 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&camera_ldo_50m_avdd_en>;
+  };
+
+  /*s5k4h7 dvdd*/
+  camera_ldo_8m_dvdd: gpio-regulator@1 {
+    compatible = "regulator-fixed";
+    reg = <0x01 0x00>;
+    regulator-name = "camera_ldo_8m_dvdd";
+    regulator-min-microvolt = <1200000>;
+    regulator-max-microvolt = <1200000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&tlmm 6 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&camera_ldo_8m_dvdd_en>;
+  };
+
+  camera_ldo_50m_afvdd: gpio-regulator@2 {
+    compatible = "regulator-fixed";
+    reg = <0x02 0x00>;
+    regulator-name = "camera_ldo_50m_afvdd";
+    regulator-min-microvolt = <2800000>;
+    regulator-max-microvolt = <2800000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&pm6125_gpios 5 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&camera_ldo_50m_afvdd_en>;
+  };
+
+  flash_ldo_dovdd: gpio-regulator@3 {
+    compatible = "regulator-fixed";
+    reg = <0x03 0x00>;
+    regulator-name = "flash_ldo_dovdd";
+    regulator-min-microvolt = <1800000>;
+    regulator-max-microvolt = <1800000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&tlmm 24 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&flash_ldo_dovdd_en>;
+  };
+
+  camera_ldo_8m_avdd: gpio-regulator@4 {
+    compatible = "regulator-fixed";
+    reg = <0x04 0x00>;
+    regulator-name = "camera_ldo_8m_avdd";
+    regulator-min-microvolt = <2800000>;
+    regulator-max-microvolt = <2800000>;
+    regulator-enable-ramp-delay = <233>;
+    enable-active-high;
+    gpio = <&tlmm 38 0>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&camera_ldo_8m_avdd_en>;
+  };
+
+  qcom,cam-res-mgr {
+    compatible = "qcom,cam-res-mgr";
+    status = "ok"
+  };
+
+  mot,cam-actuator {
+    compatible = "mot,actuator";
+    status = "ok"
+  };
+};
+
+&tlmm {
+  flash_ldo_dovdd_en: flash_ldo_dovdd_en {
+    mux {
+      pins = "gpio24";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio24";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+    mux {
+      pins = "gpio29";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio29";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+    mux {
+      pins = "gpio29";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio29";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+    mux {
+      pins = "gpio30";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio30";
+      bias-disable; /* No PULL */
+      drive-strength = <4>; /* 4 MA */
+    };
+  };
+
+  cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+    mux {
+      pins = "gpio30";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio30";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <4>; /* 4 MA */
+    };
+  };
+
+  cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+    mux {
+      pins = "gpio31";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio31";
+      bias-disable; /* No PULL */
+      drive-strength = <2>;
+    };
+  };
+
+  cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+    mux {
+      pins = "gpio31";
+      function = "cam_mclk";
+    };
+
+    config {
+      pins = "gpio31";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>;
+    };
+  };
+
+  cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+    mux {
+      pins = "gpio35";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio35";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+    mux {
+      pins = "gpio35";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio35";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>; /* 2 MA */
+      output-low;
+    };
+  };
+  cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+    mux {
+      pins = "gpio37";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio37";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+    mux {
+      pins = "gpio37";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio37";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>; /* 2 MA */
+      output-low;
+    };
+  };
+  cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+    mux {
+      pins = "gpio34";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio34";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+    mux {
+      pins = "gpio34";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio34";
+      bias-pull-down; /* PULL DOWN */
+      drive-strength = <2>; /* 2 MA */
+      output-low;
+    };
+  };
+
+/* s5kjns avdd enable */
+  camera_ldo_50m_avdd_en: camera_ldo_50m_avdd_en {
+    mux {
+      pins = "gpio8";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio8";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+  camera_ldo_8m_avdd_en: camera_ldo_8m_avdd_en {
+    mux {
+      pins = "gpio38";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio38";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+
+/* s5k4h7 dvdd enable */
+  camera_ldo_8m_dvdd_en: camera_ldo_8m_dvdd_en {
+    mux {
+      pins = "gpio6";
+      function = "gpio";
+    };
+
+    config {
+      pins = "gpio6";
+      bias-disable; /* No PULL */
+      drive-strength = <2>; /* 2 MA */
+    };
+  };
+};
+
+&cam_cci0 {
+  /* Rear 50M AF */
+  actuator_rear_main: qcom,actuator@0{
+    cell-index = <0>;
+    compatible = "qcom,actuator";
+    cci-master = <0>;
+    cam_vaf-supply = <&camera_ldo_50m_afvdd>;
+    regulator-names = "cam_vaf";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <2800000>;
+    rgltr-max-voltage = <2800000>;
+    rgltr-load-current = <103000>;
+    status = "ok"
+    multi-user-support;
+  };
+
+
+  /* Rear s5kjns FLASH */
+  led_flash_rear: qcom,camera-flash@0 {
+    cell-index = <0>;
+    reg = <0x0>;
+    compatible = "qcom,camera-flash";
+    flash-type = <CAM_FLASH_TYPE_I2C>;
+    cam_vio-supply = <&L13A>;
+    cam_v_custom2-supply = <&flash_ldo_dovdd>;
+    regulator-names = "cam_vio","cam_v_custom2";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 1800000>;
+    rgltr-max-voltage = <1800000 1800000>;
+    rgltr-load-current = <100000 120000>;
+    distinguish-flash-supplier = <0xc6 0x0c 0x3a>;
+    cci-master = <1>;
+    status = "ok"
+  };
+
+  /* MACRO sc202acs FLASH */
+  led_flash_macro: qcom,camera-flash@2 {
+    cell-index = <2>;
+    reg = <0x2>;
+    compatible = "qcom,camera-flash";
+    flash-type = <CAM_FLASH_TYPE_I2C>;
+    cam_vio-supply = <&L13A>;
+    cam_v_custom2-supply = <&flash_ldo_dovdd>;
+    regulator-names = "cam_vio","cam_v_custom2";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 1800000>;
+    rgltr-max-voltage = <1800000 1800000>;
+    rgltr-load-current = <100000 120000>;
+    distinguish-flash-supplier = <0xc6 0x0c 0x3a>;
+    cci-master = <1>;
+    status = "ok"
+  };
+
+  /* Rear s5kjns eeprom */
+  eeprom_rear: qcom,eeprom@0 {
+    cell-index = <0>;
+    reg = <0x0>;
+    compatible = "qcom,eeprom";
+    cam_vio-supply = <&L13A>;
+    regulator-names = "cam_vio";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000>;
+    rgltr-max-voltage = <1800000>;
+    rgltr-load-current = <120000>;
+    cci-master = <0>;
+    status = "ok"
+  };
+
+  /* Rear sc202acs eeprom */
+  eeprom_macro: qcom,eeprom@2 {
+    cell-index = <2>;
+    reg = <0x2>;
+    compatible = "qcom,eeprom";
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_8m_avdd>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    regulator-names = "cam_vio", "cam_vana", "cam_clk";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 2800000 0>;
+    rgltr-max-voltage = <1800000 2800000 0>;
+    rgltr-load-current = <120000 80000 0>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_macro_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_macro_reset_suspend>;
+    gpios = <&tlmm 31 0>, <&tlmm 37 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1 >;
+    gpio-req-tbl-flags = <1 0 >;
+    gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET3";
+    sensor-mode = <0>;
+    cci-master = <1>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+
+  /* Rear s5kjns */
+  rear_main: qcom,cam-sensor@0 {
+    cell-index = <0>;
+    compatible = "qcom,cam-sensor";
+    csiphy-sd-index = <1>;
+    sensor-position-roll = <90>;
+    sensor-position-pitch = <0>;
+    sensor-position-yaw = <180>;
+    actuator-src = <&actuator_rear_main>;
+    eeprom-src = <&eeprom_rear>;
+    led-flash-src = <&led_flash_rear>;
+    cam_v_custom2-supply = <&flash_ldo_dovdd>;
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_50m_avdd>;
+    cam_vdig-supply = <&L3A>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    cam_vaf-supply = <&camera_ldo_50m_afvdd>;
+    regulator-names ="cam_v_custom2", "cam_vio", "cam_vana", "cam_vdig", "cam_clk", "cam_vaf";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 1800000 2800000 1050000 0 2800000>;
+    rgltr-max-voltage = <1800000 1800000 2800000 1050000 0 2800000>;
+    rgltr-load-current = <120000 120000 80000 1200000 0 103000>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_main_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_main_reset_suspend>;
+    gpios = <&tlmm 29 0>, <&tlmm 35 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1>;
+    gpio-req-tbl-flags = <1 0>;
+    gpio-req-tbl-label = "CAMIF_MCLK0", "CAM_RESET1";
+    cci-master = <0>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+
+  /* Rear sc202acs */
+  rear_macro: qcom,cam-sensor@2 {
+    cell-index = <2>;
+    compatible = "qcom,cam-sensor";
+    csiphy-sd-index = <2>;
+    sensor-position-roll = <90>;
+    sensor-position-pitch = <0>;
+    sensor-position-yaw = <180>;
+    eeprom-src = <&eeprom_macro>;
+    led-flash-src = <&led_flash_macro>;
+    cam_v_custom2-supply = <&flash_ldo_dovdd>;
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_8m_avdd>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    regulator-names = "cam_v_custom2", "cam_vio", "cam_vana", "cam_clk";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 1800000 2800000 0>;
+    rgltr-max-voltage = <1800000 1800000 2800000 0>;
+    rgltr-load-current = <120000 120000 80000 0>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_macro_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_macro_reset_suspend>;
+    gpios = <&tlmm 31 0>, <&tlmm 37 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1 >;
+    gpio-req-tbl-flags = <1 0 >;
+    gpio-req-tbl-label = "CAMIF_MCLK2", "CAM_RESET3";
+    sensor-mode = <0>;
+    cci-master = <1>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+};
+
+&cam_cci1 {
+  /* Front s5k4h7 otp */
+  eeprom_front: qcom,eeprom@1 {
+    cell-index = <1>;
+    reg = <0x1>;
+    compatible = "qcom,eeprom";
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_8m_avdd>;
+    cam_vdig-supply = <&camera_ldo_8m_dvdd>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 2800000 1200000 0>;
+    rgltr-max-voltage = <1800000 2800000 1200000 0>;
+    rgltr-load-current = <120000 80000 1200000 0>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_reset_suspend>;
+    gpios = <&tlmm 30 0>, <&tlmm 34 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1 >;
+    gpio-req-tbl-flags = <1 0 >;
+    gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET0";
+    sensor-mode = <1>;
+    cci-master = <0>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+
+  /*Front s5k4h7*/
+  front_main: qcom,cam-sensor@1 {
+    cell-index = <1>;
+    compatible = "qcom,cam-sensor";
+    csiphy-sd-index = <3>;
+    sensor-position-roll = <270>;
+    sensor-position-pitch = <0>;
+    sensor-position-yaw = <0>;
+    eeprom-src = <&eeprom_front>;
+    cam_vio-supply = <&L13A>;
+    cam_vana-supply = <&camera_ldo_8m_avdd>;
+    cam_vdig-supply = <&camera_ldo_8m_dvdd>;
+    cam_clk-supply = <&gcc_camss_top_gdsc>;
+    regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";
+    rgltr-cntrl-support;
+    rgltr-min-voltage = <1800000 2800000 1200000 0>;
+    rgltr-max-voltage = <1800000 2800000 1200000 0>;
+    rgltr-load-current = <120000 80000 1200000 0>;
+    gpio-no-mux = <0>;
+    pinctrl-names = "cam_default", "cam_suspend";
+    pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_front_reset_active>;
+    pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_front_reset_suspend>;
+    gpios = <&tlmm 30 0>, <&tlmm 34 0>;
+    gpio-reset = <1>;
+    gpio-req-tbl-num = <0 1 >;
+    gpio-req-tbl-flags = <1 0 >;
+    gpio-req-tbl-label = "CAMIF_MCLK1", "CAM_RESET0";
+    sensor-mode = <1>;
+    cci-master = <0>;
+    status = "ok"
+    clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+    clock-names = "cam_clk";
+    clock-cntl-level = "turbo";
+    clock-rates = <24000000>;
+  };
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-miami-overlay.dtsi

@@ -0,0 +1,453 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+#include "blair-camera-flash-pwm.dtsi"
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_ois_vsync_irq_default: cam_ois_vsync_irq_default {
+		mux {
+			pins = "gpio51";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio51";
+			drive-strength = <2>;
+			input-enable;
+		};
+	};
+};
+
+&L21A{
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <3000000>;
+	qcom,init-voltage = <2500000>;
+	status = "okay";
+};
+
+&pm6125_pwm {
+ status = "ok"
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	i2c_freq_100Khz_cci0: qcom,i2c_standard_mode {
+		hw-scl-stretch-en = <1>;
+	};
+
+	i2c_freq_400Khz_cci0: qcom,i2c_fast_mode {
+		hw-scl-stretch-en = <0>;
+	};
+
+	i2c_freq_1Mhz_cci0: qcom,i2c_fast_plus_mode {
+		hw-scl-stretch-en = <1>;
+	};
+
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vaf-supply = <&cam_pmic_ldo5>;
+		cam_v_custom1-supply = <&cam_pmic_ldo6>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1800000 2800000 2800000>;
+		rgltr-load-current = <500 300000 30000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	ois_main: qcom,ois@0 {
+		cell-index = <0>;
+		compatible = "qcom,ois";
+		interrupt-parent = <&tlmm>;
+		interrupts = <51 IRQ_TYPE_EDGE_RISING>;
+		vsync-irq-support;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_ois_vsync_irq_default>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vaf-supply = <&cam_pmic_ldo5>;
+		cam_v_custom1-supply = <&cam_pmic_ldo6>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1800000 2800000 2800000>;
+		rgltr-load-current = <500 300000 30000>;
+		cci-master = <1>;
+		status = "ok"
+		ois-name = "mot_aw86006";
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1805000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1805000>;
+		rgltr-load-current = <3000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+		sensor_main: qcom,cam-sensor@0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		eeprom-src = <&eeprom_main>;
+		ois-src = <&ois_main>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo3>;
+		cam_vdig-supply = <&cam_pmic_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RM_RST";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	sensor_front: qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo4>;
+		cam_vdig-supply = <&cam_pmic_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1100000 0>;
+		rgltr-max-voltage = <1800000 2800000 1100000 0>;
+		rgltr-load-current = <300 39000 93000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_FW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+
+	eeprom_wide: qcom,eeprom@2 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1805000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+
+	};
+
+	actuator_wide: qcom,actuator@2 {
+		cell-index = <2>;
+		compatible = "qcom,actuator";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vaf-supply = <&cam_pmic_ldo5>;
+		regulator-names = "cam_vio", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 >;
+		rgltr-max-voltage = <1800000 2800000 >;
+		rgltr-load-current = <3000 130000 >;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	sensor_wide: qcom,cam-sensor@2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		actuator-src = <&actuator_wide>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo4>;
+		cam_vdig-supply = <&cam_pmic_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1100000 0>;
+		rgltr-max-voltage = <1800000 2800000 1100000 0>;
+		rgltr-load-current = <3000 81000 36000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-milanf-overlay.dtsi

@@ -0,0 +1,576 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_depth_reset_active: cam_sensor_depth_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_depth_reset_suspend: cam_sensor_depth_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_ois_vsync_irq_default: cam_ois_vsync_irq_default {
+		mux {
+			pins = "gpio51";
+			function = "gpio";
+		};
+		config {
+		        pins = "gpio51";
+			drive-strength = <2>;
+			input-enable;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		cam_v_custom1-supply = <&cam_pmic1_ldo6_vddois>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1800000 2800000 2800000>;
+		rgltr-load-current = <120000 100000 100000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	ois_main: qcom,ois@0 {
+		cell-index = <0>;
+		compatible = "qcom,ois";
+		interrupt-parent = <&tlmm>;
+		interrupts = <51 IRQ_TYPE_EDGE_RISING>;
+		vsync-irq-support;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_ois_vsync_irq_default>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		cam_v_custom1-supply = <&cam_pmic1_ldo6_vddois>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1800000 2800000 2800000>;
+		rgltr-load-current = <120000 100000 100000>;
+		cci-master = <1>;
+		status = "ok"
+		ois-name = "mot_dw9781c";
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	sensor_main: qcom,cam-sensor@0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_rear>;
+		eeprom-src = <&eeprom_main>;
+		ois-src = <&ois_main>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo3_avdd1>;
+		cam_vdig-supply = <&cam_pmic1_ldo1_dvdd1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1100000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1100000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RM_RST";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	sensor_front: qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_FW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+};
+
+&cam_cci1 {
+	eeprom_depth: qcom,eeprom@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RD_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	sensor_depth: qcom,cam-sensor@2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_depth>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RD_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	actuator_wide: qcom,actuator@1 {
+		cell-index = <1>;
+		compatible = "qcom,actuator";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		regulator-names = "cam_vio", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000>;
+		rgltr-max-voltage = <1800000 2800000>;
+		rgltr-load-current = <120000 100000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	sensor_wide: qcom,cam-sensor@3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		actuator-src = <&actuator_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_vaf", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 2800000 0>;
+		rgltr-load-current = <120000 80000 1200000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-penang-overlay.dtsi

@@ -0,0 +1,575 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_depth_reset_active: cam_sensor_depth_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_depth_reset_suspend: cam_sensor_depth_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_ois_vsync_irq_default: cam_ois_vsync_irq_default {
+		mux {
+			pins = "gpio51";
+			function = "gpio";
+		};
+		config {
+		        pins = "gpio51";
+			drive-strength = <2>;
+			input-enable;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		cam_v_custom1-supply = <&cam_pmic1_ldo6_vddois>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1800000 2800000 2800000>;
+		rgltr-load-current = <120000 100000 100000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	ois_main: qcom,ois@0 {
+		cell-index = <0>;
+		compatible = "qcom,ois";
+		interrupt-parent = <&tlmm>;
+		interrupts = <51 IRQ_TYPE_EDGE_RISING>;
+		vsync-irq-support;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_ois_vsync_irq_default>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		cam_v_custom1-supply = <&cam_pmic1_ldo6_vddois>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1800000 2800000 2800000>;
+		rgltr-load-current = <120000 100000 100000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	sensor_main: qcom,cam-sensor@0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_rear>;
+		eeprom-src = <&eeprom_main>;
+		ois-src = <&ois_main>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo3_avdd1>;
+		cam_vdig-supply = <&cam_pmic1_ldo1_dvdd1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1100000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1100000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RM_RST";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	sensor_front: qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_FW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+};
+
+&cam_cci1 {
+	eeprom_depth: qcom,eeprom@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RD_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	sensor_depth: qcom,cam-sensor@2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_depth>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RD_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	actuator_wide: qcom,actuator@1 {
+		cell-index = <1>;
+		compatible = "qcom,actuator";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		regulator-names = "cam_vio", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000>;
+		rgltr-max-voltage = <1800000 2800000>;
+		rgltr-load-current = <120000 100000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	sensor_wide: qcom,cam-sensor@3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		actuator-src = <&actuator_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_vaf", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 2800000 0>;
+		rgltr-load-current = <120000 80000 1200000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-rhodec-overlay.dtsi

@@ -0,0 +1,575 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_wide_dvdd_en_default: cam_wide_dvdd_en_default {
+		mux {
+			pins = "gpio134";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio134";
+			bias-disable; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+
+	cam_wide_dvdd: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_wide_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 134 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_wide_dvdd_en_default>;
+		vin-supply = <&S6A>;
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok"
+		multi-user-support;
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_main: qcom,eeprom0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vaf-supply = <&cam_ldo5>;
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vaf", "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000 1800000>;
+		rgltr-max-voltage = <2800000 1800000>;
+		rgltr-load-current = <100000 120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_rear>;
+		eeprom-src = <&eeprom_main>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom2 {
+		cell-index = <2>;
+                reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_front: qcom,eeprom1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo3>;
+		cam_vdig-supply = <&cam_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET1";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_macro: qcom,eeprom3 {
+		cell-index = <3>;
+                reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000  0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+		eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000  0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-rhodei-overlay.dtsi

@@ -0,0 +1,771 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_rear_avdd_en_default: cam_rear_avdd_en_default {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+	cam_rear_dvdd_en_default: cam_rear_dvdd_en_default {
+		mux {
+			pins = "gpio33";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio33";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+	cam_rear_af_en_default: cam_rear_af_en_default {
+		mux {
+			pins = "gpio56";
+			function = "gpio";
+        };
+
+		config {
+			pins = "gpio56";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+	cam_rear_adj_en_default: cam_rear_adj_en_default {
+		mux {
+			pins = "gpio47";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio47";
+			bias-disable; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			input-high;
+		};
+	};
+
+	cam_front_avdd_en_default: cam_front_avdd_en_default {
+		mux {
+			pins = "gpio87";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio87";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+
+	cam_wide_dvdd_en_default: cam_wide_dvdd_en_default {
+		mux {
+			pins = "gpio46";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio46";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+
+	cam_wide_macro_avdd_en_default: cam_wide_macro_avdd_en_default {
+		mux {
+			pins = "gpio45";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio45";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+	cam_flash_en_active: cam_flash_en_active {
+		mux {
+			pins = "gpio102";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio102";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+	cam_flash_en_suspend: cam_flash_en_suspend {
+		mux {
+			pins = "gpio102";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio102";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+	cam_flash_torch_active: cam_flash_torch_active {
+		/* AFVDD */
+		mux {
+			pins = "gpio57";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio57";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+	cam_flash_torch_suspend: cam_flash_torch_suspend {
+		/* AFVDD */
+		mux {
+			pins = "gpio57";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio57";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&L3A{
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	qcom,init-voltage = <1200000>;
+	status = "okay";
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+
+	cam_rear_avdd: gpio-regulator@4{
+		compatible = "regulator-fixed";
+		reg = <0x04 0x04>;
+		regulator-name = "cam_rear_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 49 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rear_avdd_en_default>;
+	};
+	cam_rear_dvdd: gpio-regulator@5{
+		compatible = "regulator-fixed";
+		reg = <0x05 0x05>;
+		regulator-name = "cam_rear_dvdd";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 33 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rear_dvdd_en_default>;
+		vin-supply = <&S6A>;
+	};
+	cam_rear_af: gpio-regulator@6{
+		compatible = "regulator-fixed";
+		reg = <0x06 0x06>;
+		regulator-name = "cam_rear_af";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 56 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rear_af_en_default>;
+	};
+	cam_front_avdd: gpio-regulator@3{
+		compatible = "regulator-fixed";
+		reg = <0x02 0x02>;
+		regulator-name = "cam_front_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 87 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_front_avdd_en_default>;
+		/*vin-supply = <&BOB>;*/
+	};
+
+	cam_wide_dvdd: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_wide_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 46 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_wide_dvdd_en_default>;
+		vin-supply = <&S6A>;
+	};
+
+	cam_wide_macro_avdd: gpio-regulator@1{
+		compatible = "regulator-fixed";
+		reg = <0x01 0x01>;
+		regulator-name = "cam_wide_macro_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_wide_macro_avdd_en_default>;
+		/*vin-supply = <&BOB>;*/
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		cci-master = <0>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cam_vio-supply = <&L9A>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default","cam_suspend";
+		pinctrl-0 = <&cam_flash_en_active &cam_flash_torch_active>;
+		pinctrl-1 = <&cam_flash_en_suspend &cam_flash_torch_suspend>;
+		gpios = <&tlmm 102 0>,
+			<&tlmm 57 0>;
+		gpio-custom1 = <0>;
+		gpio-custom2 = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <0 0>;
+		gpio-req-tbl-label = "SENSOR_CUSTOM_GPIO1",
+				"SENSOR_CUSTOM_GPIO2";
+ 		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vaf-supply = <&cam_rear_af>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		cci-master = <1>;
+		status = "ok"
+		multi-user-support;
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L9A>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L9A>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <3000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		eeprom-src = <&eeprom_main>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_rear_avdd>;
+		cam_vdig-supply = <&cam_rear_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&cam_rear_af>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active
+				&cam_flash_en_active
+				&cam_rear_adj_en_default>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend
+				&cam_flash_en_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>,
+			<&tlmm 102 0>,
+			<&tlmm 47 0>;
+		gpio-reset = <1>;
+		gpio-custom2 = <2>;
+		gpio-custom1 = <3>;
+		gpio-req-tbl-num = <0 1 2 3>;
+		gpio-req-tbl-flags = <1 0 0 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0",
+					"CAM_FLASH_EN",
+					"CAM_DVDD_SEL0";
+		cci-master = <1>;
+		status = "ok"
+		need-change-cci-master;
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_front_avdd>;
+		cam_vdig-supply = <&L3A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET0";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_macro: qcom,eeprom@2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_wide_macro_avdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_macro>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_wide_macro_avdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_macro_reset_active
+				&cam_flash_en_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_macro_reset_suspend
+				&cam_flash_en_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>,
+			<&tlmm 102 0>;
+		gpio-reset = <1>;
+		gpio-custom2 = <2>;
+		gpio-req-tbl-num = <0 1 2>;
+		gpio-req-tbl-flags = <1 0 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2",
+					"CAM_FLASH_EN";
+		cci-master = <0>;
+		status = "ok"
+		need-change-cci-master;
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	eeprom_wide: qcom,eeprom@3 {
+		cell-index = <3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_wide_macro_avdd>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_wide_macro_avdd>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-rhodep-dvt2-overlay.dtsi

@@ -0,0 +1,680 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+/delete-node/ &cam_sensor_mclk0_active;
+/delete-node/ &cam_sensor_mclk1_active;
+/delete-node/ &cam_sensor_mclk2_active;
+/delete-node/ &cam_sensor_mclk3_active;
+/delete-node/ &cam_sensor_main_reset_active;
+/delete-node/ &cam_sensor_front_reset_active;
+/delete-node/ &cam_sensor_macro_reset_active;
+/delete-node/ &cam_sensor_wide_reset_active;
+/delete-node/ &flash_active;
+/delete-node/ &cam_sensor_mclk0_suspend;
+/delete-node/ &cam_sensor_mclk1_suspend;
+/delete-node/ &cam_sensor_mclk2_suspend;
+/delete-node/ &cam_sensor_mclk3_suspend;
+/delete-node/ &cam_sensor_main_reset_suspend;
+/delete-node/ &cam_sensor_front_reset_suspend;
+/delete-node/ &cam_sensor_macro_reset_suspend;
+/delete-node/ &cam_sensor_wide_reset_suspend;
+/delete-node/ &flash_suspend;
+/delete-node/ &cam_ois_ldo_en_default;
+/delete-node/ &cam_ois_ldo;
+/delete-node/ &actuator_main;
+/delete-node/ &ois_main;
+/delete-node/ &eeprom_main;
+/delete-node/ &eeprom_front;
+/delete-node/ &led_flash_rear;
+/delete-node/ &sensor_main;
+/delete-node/ &sensor_front;
+/delete-node/ &eeprom_macro;
+/delete-node/ &led_flash_macro;
+/delete-node/ &sensor_macro;
+/delete-node/ &eeprom_wide;
+/delete-node/ &led_flash_wide;
+/delete-node/ &sensor_wide;
+/delete-node/ &cam_ois_vsync_irq_default;
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+	cam_ois_ldo_en_default: cam_ois_ldo_en_default {
+		mux {
+			pins = "gpio86";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio86";
+			bias-pull-up; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+
+	flash_active: flash_active {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	flash_suspend: flash_suspend {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_ois_vsync_irq_default: cam_ois_vsync_irq_default {
+		mux {
+			pins = "gpio51";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio51";
+			drive-strength = <2>;
+			input-enable;
+		};
+	};
+};
+
+&L21A{
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <3000000>;
+	qcom,init-voltage = <2500000>;
+	status = "okay";
+};
+
+&pm6125_pwm {
+ status = "ok"
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+		gpios-shared = <404>;
+		pinctrl-names = "flash_active", "flash_suspend";
+		pinctrl-0 = <&flash_active>;
+		pinctrl-1 = <&flash_suspend>;
+	};
+
+	cam_ois_ldo: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_ois_ldo";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 86 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_ois_ldo_en_default>;
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vaf-supply = <&cam_pmic_ldo3>;
+		cam_v_custom1-supply = <&cam_ois_ldo>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1805000 2805000 2805000>;
+		rgltr-load-current = <120000 100000 100000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	ois_main: qcom,ois@0 {
+		cell-index = <0>;
+		compatible = "qcom,ois";
+		interrupt-parent = <&tlmm>;
+		interrupts = <51 IRQ_TYPE_EDGE_RISING>;
+		vsync-irq-support;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_ois_vsync_irq_default>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vaf-supply = <&cam_pmic_ldo3>;
+		cam_v_custom1-supply = <&cam_ois_ldo>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1805000 2805000 2800000>;
+		rgltr-load-current = <120000 100000 100000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1805000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1805000>;
+		rgltr-load-current = <3000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		flash-type = <CAM_FLASH_TYPE_GPIO>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&flash_active>;
+		pinctrl-1 = <&flash_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+
+	sensor_main: qcom,cam-sensor@0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		eeprom-src = <&eeprom_main>;
+		ois-src = <&ois_main>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo4>;
+		cam_vdig-supply = <&cam_pmic_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1805000 2805000 1100000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RM_RST";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	sensor_front: qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo6>;
+		cam_vdig-supply = <&L21A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2500000 0>;
+		rgltr-max-voltage = <1805000 2805000 2500000 0>;
+		rgltr-load-current = <120000 80000 2500000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_FW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_macro: qcom,eeprom@2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo5>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1805000 2805000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		flash-type = <CAM_FLASH_TYPE_GPIO>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&flash_active>;
+		pinctrl-1 = <&flash_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+	sensor_macro: qcom,cam-sensor@2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+		eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo5>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1805000 2805000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom@3 {
+		cell-index = <3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo5>;
+		cam_vdig-supply = <&cam_pmic_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1805000 2805000 1205000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		compatible = "qcom,camera-flash";
+		flash-type = <CAM_FLASH_TYPE_GPIO>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&flash_active>;
+		pinctrl-1 = <&flash_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+	sensor_wide: qcom,cam-sensor@3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo5>;
+		cam_vdig-supply = <&cam_pmic_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1805000 2805000 1205000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+
+};

arch/arm64/boot/dts/vendor/qcom/camera/blair-camera-sensor-mot-rhodep-overlay.dtsi

@@ -0,0 +1,646 @@
+#include <dt-bindings/clock/qcom,gcc-blair.h>
+#include <dt-bindings/msm/msm-camera.h>
+#include "blair-camera-flash-pwm.dtsi"
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+	cam_ois_ldo_en_default: cam_ois_ldo_en_default {
+		mux {
+			pins = "gpio86";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio86";
+			bias-pull-up; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+
+	flash_active: flash_active {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	flash_suspend: flash_suspend {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_ois_vsync_irq_default: cam_ois_vsync_irq_default {
+		mux {
+			pins = "gpio51";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio51";
+			drive-strength = <2>;
+			input-enable;
+		};
+	};
+};
+
+&L21A{
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	qcom,init-voltage = <1200000>;
+	status = "okay";
+};
+
+&pm6125_pwm {
+ status = "ok"
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+		gpios-shared = <404>;
+		pinctrl-names = "flash_active", "flash_suspend";
+		pinctrl-0 = <&flash_active>;
+		pinctrl-1 = <&flash_suspend>;
+	};
+
+	cam_ois_ldo: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_ois_ldo";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 86 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_ois_ldo_en_default>;
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vaf-supply = <&cam_pmic_ldo3>;
+		cam_v_custom1-supply = <&cam_ois_ldo>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1805000 2805000 2805000>;
+		rgltr-load-current = <120000 100000 100000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	ois_main: qcom,ois@0 {
+		cell-index = <0>;
+		compatible = "qcom,ois";
+		interrupt-parent = <&tlmm>;
+		interrupts = <51 IRQ_TYPE_EDGE_RISING>;
+		vsync-irq-support;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_ois_vsync_irq_default>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vaf-supply = <&cam_pmic_ldo3>;
+		cam_v_custom1-supply = <&cam_ois_ldo>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000>;
+		rgltr-max-voltage = <1805000 2805000 2800000>;
+		rgltr-load-current = <120000 100000 100000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1805000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1805000>;
+		rgltr-load-current = <3000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		flash-type = <CAM_FLASH_TYPE_GPIO>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&flash_active>;
+		pinctrl-1 = <&flash_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+
+	sensor_main: qcom,cam-sensor@0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		eeprom-src = <&eeprom_main>;
+		ois-src = <&ois_main>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo4>;
+		cam_vdig-supply = <&cam_pmic_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1805000 2805000 1100000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RM_RST";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	sensor_front: qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo6>;
+		cam_vdig-supply = <&L21A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1805000 2805000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_FW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_macro: qcom,eeprom@2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo5>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1805000 2805000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		flash-type = <CAM_FLASH_TYPE_GPIO>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&flash_active>;
+		pinctrl-1 = <&flash_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+	sensor_macro: qcom,cam-sensor@2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+		eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo5>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1805000 2805000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom@3 {
+		cell-index = <3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo5>;
+		cam_vdig-supply = <&cam_pmic_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1805000 2805000 1205000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		compatible = "qcom,camera-flash";
+		flash-type = <CAM_FLASH_TYPE_GPIO>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&flash_active>;
+		pinctrl-1 = <&flash_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+	sensor_wide: qcom,cam-sensor@3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_pmic_ldo7>;
+		cam_vana-supply = <&cam_pmic_ldo5>;
+		cam_vdig-supply = <&cam_pmic_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1805000 2805000 1205000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-corfup-dvt1-overlay.dtsi

@@ -0,0 +1,19 @@
+/* Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&eeprom_macro{
+	cam_vana-supply = <&cam_macro_avdd>;
+};
+
+&sensor_macro{
+	cam_vana-supply = <&cam_macro_avdd>;
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-corfup-overlay.dtsi

@@ -0,0 +1,590 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_depth_reset_active: cam_sensor_macro_depth_reset_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_depth_reset_suspend: cam_sensor_macro_depth_reset_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+	cam_macro_avdd_en_default: cam_macro_avdd_en_default {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-disable; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+	cam_macro_avdd: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_macro_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 38 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_macro_avdd_en_default>;
+	};
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <0>;
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		cci-master = <1>;
+		status = "ok"
+                multi-user-support;
+	};
+
+       eeprom_main: qcom,eeprom@0 {
+                cell-index = <0>;
+                reg = <0x0>;
+                compatible = "qcom,eeprom";
+                cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+                regulator-names = "cam_vio";
+                rgltr-cntrl-support;
+                rgltr-min-voltage = <1800000>;
+                rgltr-max-voltage = <1800000>;
+                rgltr-load-current = <120000>;
+                cci-master = <1>;
+                status = "ok"
+        };
+
+	sensor_main: qcom,cam-sensor@0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_rear>;
+		eeprom-src = <&eeprom_main>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo6_vddois>;
+		cam_vdig-supply = <&cam_pmic2_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+                cam_vaf-supply = <&cam_pmic1_ldo5_vddaf>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk, cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RM_RST";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+        // front camera
+        eeprom_front: qcom,eeprom@1 {
+                cell-index = <1>;
+                reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+	sensor_front: qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+                eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo3_avdd1>;
+		cam_vdig-supply = <&cam_pmic1_ldo1_dvdd1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1100000 0>;
+		rgltr-max-voltage = <1800000 2800000 1100000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_FW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	// ROW/PRC: macro OV02B10; JP: depth OV02B1B;5G: macro GC02M1
+	eeprom_macro: qcom,eeprom@2 {
+                cell-index = <2>;
+                reg = <0x2>;
+                compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_macro_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_macro_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RD_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	sensor_macro: qcom,cam-sensor@2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+                eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_macro_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_macro_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RD_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	eeprom_wide: qcom,eeprom@3 {
+		cell-index = <3>;
+                reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	sensor_wide: qcom,cam-sensor@3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+                eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_pmic1_ldo7_vddio>;
+		cam_vana-supply = <&cam_pmic1_ldo4_avdd2>;
+		cam_vdig-supply = <&cam_pmic1_ldo2_dvdd2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RW_RST";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-cypfg-overlay.dtsi

@@ -0,0 +1,556 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_wide_dvdd_en_default: cam_wide_dvdd_en_default {
+		mux {
+			pins = "gpio12";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio12";
+			bias-disable; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+
+	led_flash_main: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@1 {
+		cell-index = <1>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+
+	cam_wide_dvdd: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_wide_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 12 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_wide_dvdd_en_default>;
+		vin-supply = <&S2A>;
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok"
+		multi-user-support;
+	};
+
+	eeprom_main: qcom,eeprom0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vaf-supply = <&cam_ldo5>;
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vaf", "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000 1800000>;
+		rgltr-max-voltage = <2800000 1800000>;
+		rgltr-load-current = <100000 120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_main>;
+		eeprom-src = <&eeprom_main>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom2 {
+		cell-index = <2>;
+                reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_front: qcom,eeprom1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo3>;
+		cam_vdig-supply = <&cam_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET1";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_macro: qcom,eeprom3 {
+		cell-index = <3>;
+                reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000  0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+		eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000  0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-cypfq-overlay.dtsi

@@ -0,0 +1,575 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_wide_dvdd_en_default: cam_wide_dvdd_en_default {
+		mux {
+			pins = "gpio12";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio12";
+			bias-disable; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+
+	cam_wide_dvdd: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_wide_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 12 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_wide_dvdd_en_default>;
+		vin-supply = <&S6A>;
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok"
+		multi-user-support;
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@3 {
+		cell-index = <3>;
+		reg = <0x3>;
+		compatible = "qcom,camera-flash";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <100000>;
+		flash-type = <1>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_main: qcom,eeprom0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vaf-supply = <&cam_ldo5>;
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vaf", "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000 1800000>;
+		rgltr-max-voltage = <2800000 1800000>;
+		rgltr-load-current = <100000 120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_rear>;
+		eeprom-src = <&eeprom_main>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom2 {
+		cell-index = <2>;
+                reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_front: qcom,eeprom1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo3>;
+		cam_vdig-supply = <&cam_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET1";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_macro: qcom,eeprom3 {
+		cell-index = <3>;
+                reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000  0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+		eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000  0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-denver-overlay.dtsi

@@ -0,0 +1,630 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <6>;
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <6>;
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <6>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <6>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <6>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <6>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <6>;
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <6>;
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_depth_reset_active: cam_sensor_depth_reset_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_depth_reset_suspend: cam_sensor_depth_reset_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		gpios-shared = <385>; /* shared MCLK1 30+355 */
+		gpios-shared-pinctrl = <385>;
+		shared-pctrl-gpio-names = "mclk1";
+		pinctrl-names = "mclk1_active", "mclk1_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend>;
+		status = "ok"
+	};
+
+	led_flash_main: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@1 {
+		cell-index = <1>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+
+	led_flash_front: qcom,camera-flash@3 {
+		cell-index = <3>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash1>;
+		torch-source = <&pm6150l_torch1>;
+		switch-source = <&pm6150l_switch1>;
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <1>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_main>;
+		eeprom-src = <&eeprom_main>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo3>;
+		cam_vdig-supply = <&cam_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_main: qcom,eeprom0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vaf-supply = <&cam_ldo5>;
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vaf", "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000 1800000>;
+		rgltr-max-voltage = <2800000 1800000>;
+		rgltr-load-current = <100000 120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		led-flash-src = <&led_flash_front>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <2500 50000 140000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET1";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_depth>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_depth: qcom,eeprom2 {
+		cell-index = <2>;
+                reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom3 {
+		cell-index = <3>;
+                reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_macro: qcom,eeprom4 {
+		cell-index = <4>;
+                reg = <0x4>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET4";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor@4 {
+		cell-index = <4>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+		eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET4";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-ibiza-overlay.dtsi

@@ -0,0 +1,622 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_depth_reset_active: cam_sensor_depth_reset_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_depth_reset_suspend: cam_sensor_depth_reset_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	led_flash_main: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+
+	led_flash_wide: qcom,camera-flash@1 {
+		cell-index = <1>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+
+	led_flash_macro: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		flash-source = <&pm6150l_flash0>;
+		torch-source = <&pm6150l_torch0>;
+		switch-source = <&pm6150l_switch0>;
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&cam_ldo5>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok"
+	};
+
+	eeprom_main: qcom,eeprom0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vaf-supply = <&cam_ldo5>;
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vaf", "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000 1800000>;
+		rgltr-max-voltage = <2800000 1800000>;
+		rgltr-load-current = <100000 120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		led-flash-src = <&led_flash_main>;
+		eeprom-src = <&eeprom_main>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo3>;
+		cam_vdig-supply = <&cam_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1800000 2800000 1150000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor@1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo3>;
+		cam_vdig-supply = <&cam_ldo1>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0>;
+		rgltr-max-voltage = <1800000 2800000 1150000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET1";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_macro: qcom,eeprom3 {
+		cell-index = <3>;
+                reg = <0x3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor@3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_macro>;
+		eeprom-src = <&eeprom_macro>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo6>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_depth>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_depth: qcom,eeprom2 {
+		cell-index = <2>;
+                reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_depth_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_depth_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 49 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor4 {
+		cell-index = <4>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		led-flash-src = <&led_flash_wide>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET4";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_wide: qcom,eeprom4 {
+		cell-index = <4>;
+                reg = <0x4>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&cam_ldo7>;
+		cam_vana-supply = <&cam_ldo4>;
+		cam_vdig-supply = <&cam_ldo2>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET4";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-penang-jp-overlay.dtsi

@@ -0,0 +1,687 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		/* MCLK 1*/
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		/* MCLK 1*/
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		/* MCLK 3*/
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		/* MCLK 3*/
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+
+
+	camera_ldo_dovdd_en: camera_ldo_dovdd_en {
+		mux {
+			pins = "gpio33";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio33";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_50m_dvdd_en: camera_ldo_50m_dvdd_en {
+		mux {
+			pins = "gpio48";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio48";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_50m_avdd_en: camera_ldo_50m_avdd_en {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_8m_dvdd_en: camera_ldo_8m_dvdd_en {
+		mux {
+			pins = "gpio12";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio12";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_8m_avdd_en: camera_ldo_8m_avdd_en {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_2m_avdd_en: camera_ldo_2m_avdd_en {
+		mux {
+			pins = "gpio51";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio51";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	flash_ldo_dovdd_en: flash_ldo_dovdd_en {
+		mux {
+			pins = "gpio89";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio89";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_flash_torch_active: cam_flash_torch_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_flash_torch_suspend: cam_flash_torch_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&L21A{
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	qcom,init-voltage = <2800000>;
+	status = "okay";
+};
+
+&soc {
+	camera_ldo_dovdd: gpio-regulator@0 {
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "camera_ldo_dovdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 33 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_dovdd_en>;
+	};
+
+	camera_ldo_50m_dvdd: gpio-regulator@1 {
+		compatible = "regulator-fixed";
+		reg = <0x01 0x00>;
+		regulator-name = "camera_ldo_50m_dvdd";
+		regulator-min-microvolt = <1056000>;
+		regulator-max-microvolt = <1056000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 48 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_50m_dvdd_en>;
+		vin-supply = <&S6A>;
+	};
+
+	camera_ldo_50m_avdd: gpio-regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <0x02 0x00>;
+		regulator-name = "camera_ldo_50m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 36 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_50m_avdd_en>;
+	};
+
+	camera_ldo_8m_dvdd: gpio-regulator@3 {
+		compatible = "regulator-fixed";
+		reg = <0x03 0x00>;
+		regulator-name = "camera_ldo_8m_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 12 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_8m_dvdd_en>;
+		vin-supply = <&S6A>;
+	};
+
+	camera_ldo_8m_avdd: gpio-regulator@4 {
+		compatible = "regulator-fixed";
+		reg = <0x04 0x00>;
+		regulator-name = "camera_ldo_8m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 38 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_8m_avdd_en>;
+	};
+
+	camera_ldo_2m_avdd: gpio-regulator@5 {
+		compatible = "regulator-fixed";
+		reg = <0x05 0x00>;
+		regulator-name = "camera_ldo_2m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 51 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_2m_avdd_en>;
+	};
+
+	flash_ldo_dovdd: gpio-regulator@6 {
+		compatible = "regulator-fixed";
+		reg = <0x06 0x00>;
+		regulator-name = "flash_ldo_dovdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 89 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_ldo_dovdd_en>;
+
+	};
+
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	/*MOTO Rear 50M AF*/
+	actuator_rear: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <1>;
+		cam_vaf-supply = <&L21A>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok"
+		multi-user-support;
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	/*MOTO Rear 50M*/
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear>;
+		eeprom-src = <&eeprom_main>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_50m_avdd>;
+		cam_vaf-supply = <&L21A>;
+		cam_vdig-supply = <&camera_ldo_50m_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vaf", "cam_vdig", "cam_v_custom1",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000 1056000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 2800000 1056000 1800000 0>;
+		rgltr-load-current = <120000 80000 100000 1200000 800000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok"
+		need-change-cci-master;
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		compatible = "qcom,eeprom";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_8m_avdd>;
+		cam_vdig-supply = <&L3A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	/*MOTO Front 8M*/
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_8m_avdd>;
+		cam_vdig-supply = <&L3A>;    // PMIC
+		// cam_vdig-supply = <&camera_ldo_8m_dvdd>;    // LDO
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		cci-master = <0>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		regulator-names = "cam_vio","cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 1800000>;
+		rgltr-max-voltage = <1800000 1800000>;
+		rgltr-load-current = <120000 800000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default","cam_suspend";
+		pinctrl-0 = <&cam_flash_torch_active>;
+		pinctrl-1 = <&cam_flash_torch_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+
+	led_flash_rear_aux: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		cci-master = <0>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		regulator-names = "cam_vio", "cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 1800000>;
+		rgltr-max-voltage = <1800000 1800000>;
+		rgltr-load-current = <120000 800000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default","cam_suspend";
+		pinctrl-0 = <&cam_flash_torch_active>;
+		pinctrl-1 = <&cam_flash_torch_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+	eeprom_macro: qcom,eeprom@2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_2m_avdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	/*MOTO Rear Aux 2M*/
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_macro>;
+		led-flash-src = <&led_flash_rear_aux>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_2m_avdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		regulator-names = "cam_vio", "cam_vana", "cam_v_custom1", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 1800000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-penang-overlay.dtsi

@@ -0,0 +1,687 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		/* MCLK 1*/
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		/* MCLK 1*/
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		/* MCLK 3*/
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		/* MCLK 3*/
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+
+
+	camera_ldo_dovdd_en: camera_ldo_dovdd_en {
+		mux {
+			pins = "gpio33";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio33";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_50m_dvdd_en: camera_ldo_50m_dvdd_en {
+		mux {
+			pins = "gpio6";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio6";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_50m_avdd_en: camera_ldo_50m_avdd_en {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_8m_dvdd_en: camera_ldo_8m_dvdd_en {
+		mux {
+			pins = "gpio12";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio12";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_8m_avdd_en: camera_ldo_8m_avdd_en {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	camera_ldo_2m_avdd_en: camera_ldo_2m_avdd_en {
+		mux {
+			pins = "gpio51";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio51";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	flash_ldo_dovdd_en: flash_ldo_dovdd_en {
+		mux {
+			pins = "gpio89";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio89";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_flash_torch_active: cam_flash_torch_active {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_flash_torch_suspend: cam_flash_torch_suspend {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&L21A{
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	qcom,init-voltage = <2800000>;
+	status = "okay";
+};
+
+&soc {
+	camera_ldo_dovdd: gpio-regulator@0 {
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "camera_ldo_dovdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 33 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_dovdd_en>;
+	};
+
+	camera_ldo_50m_dvdd: gpio-regulator@1 {
+		compatible = "regulator-fixed";
+		reg = <0x01 0x00>;
+		regulator-name = "camera_ldo_50m_dvdd";
+		regulator-min-microvolt = <1056000>;
+		regulator-max-microvolt = <1056000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 6 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_50m_dvdd_en>;
+		vin-supply = <&S6A>;
+	};
+
+	camera_ldo_50m_avdd: gpio-regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <0x02 0x00>;
+		regulator-name = "camera_ldo_50m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 36 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_50m_avdd_en>;
+	};
+
+	camera_ldo_8m_dvdd: gpio-regulator@3 {
+		compatible = "regulator-fixed";
+		reg = <0x03 0x00>;
+		regulator-name = "camera_ldo_8m_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 6 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_8m_dvdd_en>;
+		vin-supply = <&S6A>;
+	};
+
+	camera_ldo_8m_avdd: gpio-regulator@4 {
+		compatible = "regulator-fixed";
+		reg = <0x04 0x00>;
+		regulator-name = "camera_ldo_8m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 38 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_8m_avdd_en>;
+	};
+
+	camera_ldo_2m_avdd: gpio-regulator@5 {
+		compatible = "regulator-fixed";
+		reg = <0x05 0x00>;
+		regulator-name = "camera_ldo_2m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 51 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_2m_avdd_en>;
+	};
+
+	flash_ldo_dovdd: gpio-regulator@6 {
+		compatible = "regulator-fixed";
+		reg = <0x06 0x00>;
+		regulator-name = "flash_ldo_dovdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 89 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_ldo_dovdd_en>;
+
+	};
+
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	/*MOTO Rear 50M AF*/
+	actuator_rear: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <1>;
+		cam_vaf-supply = <&L21A>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok"
+		multi-user-support;
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	/*MOTO Rear 50M*/
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear>;
+		eeprom-src = <&eeprom_main>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_50m_avdd>;
+		cam_vaf-supply = <&L21A>;
+		cam_vdig-supply = <&camera_ldo_50m_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vaf", "cam_vdig", "cam_v_custom1",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000 1056000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 2800000 1056000 1800000 0>;
+		rgltr-load-current = <120000 80000 100000 1200000 800000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok"
+		need-change-cci-master;
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		compatible = "qcom,eeprom";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_8m_avdd>;
+		cam_vdig-supply = <&L3A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	/*MOTO Front 8M*/
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_8m_avdd>;
+		cam_vdig-supply = <&L3A>;    // PMIC
+		// cam_vdig-supply = <&camera_ldo_8m_dvdd>;    // LDO
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		cci-master = <0>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		regulator-names = "cam_vio","cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 1800000>;
+		rgltr-max-voltage = <1800000 1800000>;
+		rgltr-load-current = <120000 800000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default","cam_suspend";
+		pinctrl-0 = <&cam_flash_torch_active>;
+		pinctrl-1 = <&cam_flash_torch_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+
+	led_flash_rear_aux: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		cci-master = <0>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		regulator-names = "cam_vio","cam_v_custom1";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 1800000>;
+		rgltr-max-voltage = <1800000 1800000>;
+		rgltr-load-current = <120000 800000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default","cam_suspend";
+		pinctrl-0 = <&cam_flash_torch_active>;
+		pinctrl-1 = <&cam_flash_torch_suspend>;
+		gpios = <&tlmm 49 0>;
+		gpio-custom1 = <0>;
+		gpio-req-tbl-num = <0>;
+		gpio-req-tbl-flags = <0>;
+		gpio-req-tbl-label = "CUSTOM_GPIO1";
+		status = "ok"
+	};
+	eeprom_macro: qcom,eeprom@2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_2m_avdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	/*MOTO Rear Aux 2M*/
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_macro>;
+		led-flash-src = <&led_flash_rear_aux>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_2m_avdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		regulator-names = "cam_vio", "cam_vana", "cam_v_custom1","cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 1800000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-pnangn-overlay.dtsi

@@ -0,0 +1,669 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		/* MCLK 0*/
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		/* MCLK 1*/
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		/* MCLK 1*/
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <4>; /* 4 MA */
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		/* MCLK 3*/
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		/* MCLK 3*/
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	camera_ldo_dovdd_en: camera_ldo_dovdd_en {
+		mux {
+			pins = "gpio46";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio46";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	camera_ldo_48m_dvdd_en: camera_ldo_48m_dvdd_en {
+		mux {
+			pins = "gpio47";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio47";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	camera_ldo_48m_avdd_en: camera_ldo_48m_avdd_en {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	camera_ldo_8m_avdd_en: camera_ldo_8m_avdd_en {
+		mux {
+			pins = "gpio87";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio87";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	camera_ldo_8m_dvdd_en: camera_ldo_8m_dvdd_en {
+		mux {
+			pins = "gpio33";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio33";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	camera_ldo_2m_avdd_en: camera_ldo_2m_avdd_en {
+		mux {
+			pins = "gpio45";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio45";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	flash_ldo_dovdd_en: flash_ldo_dovdd_en {
+		mux {
+			pins = "gpio57";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio57";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	camera_ldo_48m_afvdd_en: camera_ldo_48m_afvdd_en {
+		mux {
+			pins = "gpio56";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio56";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+};
+
+//MOTO camera I2C power supply
+&L13A{
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       qcom,init-voltage = <1800000>;
+       status = "okay";
+};
+
+&soc {
+	camera_ldo_dovdd: gpio-regulator@0 {
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "camera_ldo_dovdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 46 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_dovdd_en>;
+	};
+
+	camera_ldo_8m_avdd: gpio-regulator@1 {
+		compatible = "regulator-fixed";
+		reg = <0x01 0x00>;
+		regulator-name = "camera_ldo_8m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 87 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_8m_avdd_en>;
+	};
+
+	camera_ldo_8m_dvdd: gpio-regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <0x02 0x00>;
+		regulator-name = "camera_ldo_8m_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 33 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_8m_dvdd_en>;
+	};
+
+	camera_ldo_2m_avdd: gpio-regulator@3 {
+		compatible = "regulator-fixed";
+		reg = <0x03 0x00>;
+		regulator-name = "camera_ldo_2m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_2m_avdd_en>;
+	};
+
+	camera_ldo_48m_avdd: gpio-regulator@4 {
+		compatible = "regulator-fixed";
+		reg = <0x04 0x00>;
+		regulator-name = "camera_ldo_48m_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 49 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_48m_avdd_en>;
+	};
+
+	flash_ldo_dovdd: gpio-regulator@5 {
+		compatible = "regulator-fixed";
+		reg = <0x05 0x00>;
+		regulator-name = "flash_ldo_dovdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 57 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_ldo_dovdd_en>;
+	};
+
+	camera_ldo_48m_afvdd: gpio-regulator@6 {
+		compatible = "regulator-fixed";
+		reg = <0x06 0x00>;
+		regulator-name = "camera_ldo_48m_afvdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 56 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_48m_afvdd_en>;
+	};
+
+	camera_ldo_48m_dvdd: gpio-regulator@7 {
+		compatible = "regulator-fixed";
+		reg = <0x07 0x00>;
+		regulator-name = "camera_ldo_48m_dvdd";
+		regulator-min-microvolt = <1056000>;
+		regulator-max-microvolt = <1056000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 47 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_ldo_48m_dvdd_en>;
+	};
+
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	//MOTO Rear 48M FLASH
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		cci-master = <1>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		cam_v_custom2-supply = <&L13A>;
+		regulator-names = "cam_v_custom1", "cam_v_custom2";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 1800000>;
+		rgltr-max-voltage = <1800000 1800000>;
+		rgltr-load-current = <120000 120000>;
+		status = "ok"
+	};
+
+	//MOTO Rear 2M FLASH
+	led_flash_rear_aux: qcom,camera-flash@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera-flash";
+		cci-master = <1>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		cam_v_custom2-supply = <&L13A>;
+		regulator-names = "cam_v_custom1", "cam_v_custom2";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 1800000>;
+		rgltr-max-voltage = <1800000 1800000>;
+		rgltr-load-current = <120000 120000>;
+		status = "ok"
+	};
+
+	//MOTO Rear 48M AF
+	actuator_rear: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&camera_ldo_48m_afvdd>;
+		cam_v_custom2-supply = <&L13A>;
+		regulator-names = "cam_vaf", "cam_v_custom2";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000 1800000>;
+		rgltr-max-voltage = <2800000 1800000>;
+		rgltr-load-current = <100000 120000>;
+		status = "ok"
+	};
+
+	eeprom_rear: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vaf-supply = <&camera_ldo_48m_afvdd>;
+		cam_v_custom2-supply = <&L13A>;
+		regulator-names = "cam_vio", "cam_vaf", "cam_v_custom2";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1800000>;
+		rgltr-max-voltage = <1800000 2800000 1800000>;
+		rgltr-load-current = <120000 100000 120000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	/*MOTO Rear 48M*/
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear>;
+		eeprom-src = <&eeprom_rear>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_48m_avdd>;
+		cam_vaf-supply = <&camera_ldo_48m_afvdd>;
+		cam_vdig-supply = <&camera_ldo_48m_dvdd>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		cam_v_custom2-supply = <&L13A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vaf", "cam_vdig", "cam_v_custom1",
+			"cam_v_custom2", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 2800000 1056000 1800000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 2800000 1056000 1800000 1800000 0>;
+		rgltr-load-current = <120000 80000 100000 1200000 120000 120000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		need-change-cci-master;
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_macro: qcom,eeprom@2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_2m_avdd>;
+		cam_v_custom2-supply = <&L13A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_v_custom2", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 1800000 0>;
+		rgltr-load-current = <120000 80000 120000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	/*MOTO Rear Aux 2M*/
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_macro>;
+		led-flash-src = <&led_flash_rear_aux>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_2m_avdd>;
+		cam_v_custom1-supply = <&flash_ldo_dovdd>;
+		cam_v_custom2-supply = <&L13A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_v_custom1", "cam_v_custom2",
+				"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1800000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 1800000 1800000 0>;
+		rgltr-load-current = <120000 80000 120000 120000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_macro_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_macro_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		compatible = "qcom,eeprom";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_8m_avdd>;
+		cam_vdig-supply = <&camera_ldo_8m_dvdd>;
+		cam_v_custom2-supply = <&L13A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_v_custom2", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 1800000 0>;
+		rgltr-load-current = <120000 80000 1200000 120000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	/*MOTO Front 8M*/
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&camera_ldo_dovdd>;
+		cam_vana-supply = <&camera_ldo_8m_avdd>;
+		cam_vdig-supply = <&camera_ldo_8m_dvdd>;
+		cam_v_custom2-supply = <&L13A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_v_custom2", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 1800000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 1800000 0>;
+		rgltr-load-current = <120000 80000 1200000 120000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};

arch/arm64/boot/dts/vendor/qcom/camera/holi-camera-sensor-mot-rhodec-overlay.dtsi

@@ -0,0 +1,771 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+#include <dt-bindings/msm/msm-camera.h>
+
+&tlmm {
+	cam_sensor_mclk0_active: cam_sensor_mclk0_active {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
+		mux {
+			pins = "gpio29";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio29";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk1_active: cam_sensor_mclk1_active {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
+		mux {
+			pins = "gpio30";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio30";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_active: cam_sensor_mclk2_active {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-disable; /* No PULL */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk2_suspend: cam_sensor_mclk2_suspend {
+		mux {
+			pins = "gpio31";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio31";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>;
+		};
+	};
+
+	cam_sensor_mclk3_active: cam_sensor_mclk3_active {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_mclk3_suspend: cam_sensor_mclk3_suspend {
+		mux {
+			pins = "gpio32";
+			function = "cam_mclk";
+		};
+
+		config {
+			pins = "gpio32";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_active: cam_sensor_main_reset_active {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_main_reset_suspend: cam_sensor_main_reset_suspend {
+		mux {
+			pins = "gpio35";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio35";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_front_reset_active: cam_sensor_front_reset_active {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_front_reset_suspend: cam_sensor_front_reset_suspend {
+		mux {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio34";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_wide_reset_active: cam_sensor_wide_reset_active {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_wide_reset_suspend: cam_sensor_wide_reset_suspend {
+		mux {
+			pins = "gpio36";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio36";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_sensor_macro_reset_active: cam_sensor_macro_reset_active {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	cam_sensor_macro_reset_suspend: cam_sensor_macro_reset_suspend {
+		mux {
+			pins = "gpio37";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio37";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	cam_rear_avdd_en_default: cam_rear_avdd_en_default {
+		mux {
+			pins = "gpio49";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio49";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+	cam_rear_dvdd_en_default: cam_rear_dvdd_en_default {
+		mux {
+			pins = "gpio33";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio33";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+	cam_rear_af_en_default: cam_rear_af_en_default {
+		mux {
+			pins = "gpio56";
+			function = "gpio";
+        };
+
+		config {
+			pins = "gpio56";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+	cam_rear_adj_en_default: cam_rear_adj_en_default {
+		mux {
+			pins = "gpio47";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio47";
+			bias-disable; /* NO PULL */
+			drive-strength = <2>; /* 2 MA */
+			input-high;
+		};
+	};
+
+	cam_front_avdd_en_default: cam_front_avdd_en_default {
+		mux {
+			pins = "gpio87";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio87";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+
+	cam_wide_dvdd_en_default: cam_wide_dvdd_en_default {
+		mux {
+			pins = "gpio46";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio46";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+
+	cam_wide_macro_avdd_en_default: cam_wide_macro_avdd_en_default {
+		mux {
+			pins = "gpio45";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio45";
+			bias-pull-up; /* PULL UP */
+			drive-strength = <2>; /* 2 MA */
+			output-high;
+		};
+	};
+	cam_flash_en_active: cam_flash_en_active {
+		mux {
+			pins = "gpio102";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio102";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+	cam_flash_en_suspend: cam_flash_en_suspend {
+		mux {
+			pins = "gpio102";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio102";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+	cam_flash_torch_active: cam_flash_torch_active {
+		/* AFVDD */
+		mux {
+			pins = "gpio57";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio57";
+			bias-disable; /* No PULL */
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+	cam_flash_torch_suspend: cam_flash_torch_suspend {
+		/* AFVDD */
+		mux {
+			pins = "gpio57";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio57";
+			bias-pull-down; /* PULL DOWN */
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+};
+
+&L3A{
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	qcom,init-voltage = <1200000>;
+	status = "okay";
+};
+
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok"
+	};
+
+	mot,cam-actuator {
+		compatible = "mot,actuator";
+		status = "ok"
+	};
+
+	cam_rear_avdd: gpio-regulator@4{
+		compatible = "regulator-fixed";
+		reg = <0x04 0x04>;
+		regulator-name = "cam_rear_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 49 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rear_avdd_en_default>;
+	};
+	cam_rear_dvdd: gpio-regulator@5{
+		compatible = "regulator-fixed";
+		reg = <0x05 0x05>;
+		regulator-name = "cam_rear_dvdd";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 33 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rear_dvdd_en_default>;
+		vin-supply = <&S6A>;
+	};
+	cam_rear_af: gpio-regulator@6{
+		compatible = "regulator-fixed";
+		reg = <0x06 0x06>;
+		regulator-name = "cam_rear_af";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 56 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rear_af_en_default>;
+	};
+	cam_front_avdd: gpio-regulator@3{
+		compatible = "regulator-fixed";
+		reg = <0x02 0x02>;
+		regulator-name = "cam_front_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 87 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_front_avdd_en_default>;
+		/*vin-supply = <&BOB>;*/
+	};
+
+	cam_wide_dvdd: gpio-regulator@0{
+		compatible = "regulator-fixed";
+		reg = <0x00 0x00>;
+		regulator-name = "cam_wide_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 46 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_wide_dvdd_en_default>;
+		vin-supply = <&S6A>;
+	};
+
+	cam_wide_macro_avdd: gpio-regulator@1{
+		compatible = "regulator-fixed";
+		reg = <0x01 0x01>;
+		regulator-name = "cam_wide_macro_avdd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-enable-ramp-delay = <233>;
+		enable-active-high;
+		gpio = <&tlmm 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_wide_macro_avdd_en_default>;
+		/*vin-supply = <&BOB>;*/
+	};
+
+	led_flash_rear: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		cci-master = <0>;
+		flash-type = <CAM_FLASH_TYPE_I2C>;
+		cam_vio-supply = <&L9A>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default","cam_suspend";
+		pinctrl-0 = <&cam_flash_en_active &cam_flash_torch_active>;
+		pinctrl-1 = <&cam_flash_en_suspend &cam_flash_torch_suspend>;
+		gpios = <&tlmm 102 0>,
+			<&tlmm 57 0>;
+		gpio-custom1 = <0>;
+		gpio-custom2 = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <0 0>;
+		gpio-req-tbl-label = "SENSOR_CUSTOM_GPIO1",
+				"SENSOR_CUSTOM_GPIO2";
+ 		status = "ok"
+	};
+};
+
+&cam_cci0 {
+	actuator_main: qcom,actuator@0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cam_vaf-supply = <&cam_rear_af>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		cci-master = <1>;
+		status = "ok"
+		multi-user-support;
+	};
+
+	eeprom_main: qcom,eeprom@0 {
+		cell-index = <0>;
+		reg = <0x0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L9A>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <120000>;
+		cci-master = <1>;
+		status = "ok"
+	};
+
+	eeprom_front: qcom,eeprom@1 {
+		cell-index = <1>;
+		reg = <0x1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L9A>;
+		regulator-names = "cam_vio";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000>;
+		rgltr-max-voltage = <1800000>;
+		rgltr-load-current = <3000>;
+		cci-master = <0>;
+		status = "ok"
+	};
+
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_main>;
+		eeprom-src = <&eeprom_main>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_rear_avdd>;
+		cam_vdig-supply = <&cam_rear_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&cam_rear_af>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_main_reset_active
+				&cam_flash_en_active
+				&cam_rear_adj_en_default>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_main_reset_suspend
+				&cam_flash_en_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 35 0>,
+			<&tlmm 102 0>,
+			<&tlmm 47 0>;
+		gpio-reset = <1>;
+		gpio-custom2 = <2>;
+		gpio-custom1 = <3>;
+		gpio-req-tbl-num = <0 1 2 3>;
+		gpio-req-tbl-flags = <1 0 0 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0",
+					"CAM_FLASH_EN",
+					"CAM_DVDD_SEL0";
+		cci-master = <1>;
+		status = "ok"
+		need-change-cci-master;
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_front_avdd>;
+		cam_vdig-supply = <&L3A>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_front_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_front_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET0";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};
+
+&cam_cci1 {
+	eeprom_macro: qcom,eeprom@2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_wide_macro_avdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 80000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_macro>;
+		led-flash-src = <&led_flash_rear>;
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_wide_macro_avdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio","cam_vana", "cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 0>;
+		rgltr-max-voltage = <1800000 2800000 0>;
+		rgltr-load-current = <120000 120000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_macro_reset_active
+				&cam_flash_en_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_macro_reset_suspend
+				&cam_flash_en_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 37 0>,
+			<&tlmm 102 0>;
+		gpio-reset = <1>;
+		gpio-custom2 = <2>;
+		gpio-req-tbl-num = <0 1 2>;
+		gpio-req-tbl-flags = <1 0 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET2",
+					"CAM_FLASH_EN";
+		cci-master = <0>;
+		status = "ok"
+		need-change-cci-master;
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	eeprom_wide: qcom,eeprom@3 {
+		cell-index = <3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_wide_macro_avdd>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <90>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_wide>;
+		cam_vio-supply = <&L9A>;
+		cam_vana-supply = <&cam_wide_macro_avdd>;
+		cam_vdig-supply = <&cam_wide_dvdd>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_wide_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_wide_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		cci-master = <0>;
+		status = "ok"
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+};