mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-12 07:37:31 -04:00
: camera: change 50m s5kjn1 dvdd GPIO from 6 to 48
this change only for DVT2 later hardware and only for JP SKU SN110P Change-Id: I1a98c51dd1c9a18ab36463197244ea0fd11c6a0f Signed-off-by: HQ Cam LiJunyu <lijunyu@huaqin.com> Reviewed-on: https://gerrit.mot.com/2394443 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Pengfei Qiao <qiaopf1@motorola.com> Reviewed-by: <chenlj26@motorola.com> Reviewed-by: Wang Liu <liuwang2@lenovo.com> Reviewed-by: Shuo Wang <wangsh18@motorola.com> Reviewed-by: Long Cheng <chengl1@motorola.com> Reviewed-by: Zhichao Chen <chenzc2@motorola.com> Submit-Approved: Jira Key
This commit is contained in:
HQ Cam LiJunyu
panyq6
parent
a9283e3bb5
commit
2aa9c66001
2 changed files with 623 additions and 1 deletions
622
qcom/holi-penang-common-jp-overlay.dtsi
Normal file
622
qcom/holi-penang-common-jp-overlay.dtsi
Normal file
|
|
@ -0,0 +1,622 @@
|
|||
/* Copyright (c) 2021, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
#include "holi-audio-penang-overlay.dtsi"
|
||||
#include "holi-nopmi-moto-common-overlay.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include "holi-pmic-overlay-pm6125.dtsi"
|
||||
#include "holi-thermal-overlay-pm6125.dtsi"
|
||||
#include "display/holi-sde-display-mtp-pm6125.dtsi"
|
||||
#include "penang-fps-overlay.dtsi"
|
||||
#include "penang-display.dtsi"
|
||||
#include "penang-touchscreen.dtsi"
|
||||
#include "penang-fmr-overlay.dtsi"
|
||||
#include "camera/holi-camera-sensor-mot-penang-jp-overlay.dtsi"
|
||||
#include "discrete_charging_penang.dtsi"
|
||||
#include "moto_therm_sys_temp.dtsi"
|
||||
|
||||
&wcd937x_codec {
|
||||
cdc-vdd-rxtx-supply = <&L9A>;
|
||||
cdc-vddpx-supply = <&L9A>;
|
||||
qcom,cdc-static-supplies = "cdc-vdd-rxtx",
|
||||
"cdc-vddpx";
|
||||
/*
|
||||
* Overriding cdc-vdd-mic-bias-supply to dummy value
|
||||
* to avoid compilation errors as BOB is not definied
|
||||
* for pm6125
|
||||
*/
|
||||
cdc-vdd-mic-bias-supply = <>;
|
||||
};
|
||||
|
||||
&holi_snd {
|
||||
qcom,msm-hs-linein-threshold = <4000>;
|
||||
};
|
||||
|
||||
/* Dummy LDO reference */
|
||||
&sdhc_1 {
|
||||
status = "disabled";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc1_on>;
|
||||
pinctrl-1 = <&sdc1_off>;
|
||||
|
||||
vdd-supply = <&L24A>;
|
||||
qcom,vdd-voltage-level = <2960000 2960000>;
|
||||
qcom,vdd-current-level = <0 570000>;
|
||||
|
||||
vdd-io-supply = <&L11A>;
|
||||
qcom,vdd-io-always-on;
|
||||
qcom,vdd-io-lpm-sup;
|
||||
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
||||
qcom,vdd-io-current-level = <0 325000>;
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
status = "ok"
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc2_on>;
|
||||
pinctrl-1 = <&sdc2_off>;
|
||||
|
||||
vdd-supply = <&L22A>;
|
||||
qcom,vdd-voltage-level = <2960000 2960000>;
|
||||
qcom,vdd-current-level = <0 800000>;
|
||||
|
||||
vdd-io-supply = <&L5A>;
|
||||
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
||||
qcom,vdd-io-current-level = <0 22000>;
|
||||
|
||||
cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&ufsphy_mem {
|
||||
compatible = "qcom,ufs-phy-qmp-v3";
|
||||
|
||||
vdda-phy-supply = <&L7A>;
|
||||
vdda-pll-supply = <&L4A>;
|
||||
vdda-phy-max-microamp = <62900>;
|
||||
vdda-pll-max-microamp = <18300>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
&ufshc_mem {
|
||||
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
|
||||
vdd-hba-fixed-regulator;
|
||||
|
||||
vcc-supply = <&L24A>;
|
||||
vcc-voltage-level = <2950000 2960000>;
|
||||
vcc-max-microamp = <800000>;
|
||||
|
||||
vccq2-supply = <&L11A>;
|
||||
vccq2-max-microamp = <800000>;
|
||||
vccq2-voltage-level = <1800000 1800000>;
|
||||
|
||||
qcom,vddp-ref-clk-supply = <&L4A>;
|
||||
qcom,vddp-ref-clk-max-microamp = <100>;
|
||||
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
|
||||
&tlmm {
|
||||
|
||||
nfc {
|
||||
nfc_int_active: nfc_int_active {
|
||||
/* active state */
|
||||
mux {
|
||||
/* GPIO 9: NFC Read Interrupt */
|
||||
pins = "gpio9";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio9";
|
||||
drive-strength = <2>; /* 2 MA */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
nfc_int_suspend: nfc_int_suspend {
|
||||
/* sleep state */
|
||||
mux {
|
||||
/* GPIO 9: NFC Read Interrupt */
|
||||
pins = "gpio9";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio9";
|
||||
drive-strength = <2>; /* 2 MA */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
nfc_enable_active: nfc_enable_active {
|
||||
mux {
|
||||
/* 48: Enable, 8: Firmware*/
|
||||
pins = "gpio48";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio48";
|
||||
drive-strength = <2>; /* 2 MA */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
nfc_enable_suspend: nfc_enable_suspend {
|
||||
mux {
|
||||
/* 48: Enable, 8: Firmware */
|
||||
pins = "gpio48";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio48";
|
||||
drive-strength = <2>; /* 2 MA */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
nfc_clk_req_active: nfc_clk_req_active {
|
||||
/* active state */
|
||||
mux {
|
||||
/* GPIO 7: NFC CLK Req*/
|
||||
pins = "gpio7";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio7";
|
||||
drive-strength = <2>; /* 2 MA */
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
nfc_clk_req_suspend: nfc_clk_req_suspend {
|
||||
/* sleep state */
|
||||
mux {
|
||||
/* GPIO 7: NFC CLK Req */
|
||||
pins = "gpi7";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio7";
|
||||
drive-strength = <2>; /* 2 MA */
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmk8350_vadc {
|
||||
pmk8350_qtm_n_therm {
|
||||
reg = <PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
||||
label = "pmk8350_qtm_n_therm";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
};
|
||||
pmk8350_qtm_e_therm {
|
||||
reg = <PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
||||
label = "pmk8350_qtm_e_therm";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pmk8350_adc_tm {
|
||||
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>,
|
||||
<&pmk8350_vadc PMK8350_ADC7_AMUX_THM2_100K_PU>,
|
||||
<&pmk8350_vadc PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
||||
|
||||
qtm_n__therm {
|
||||
reg = <PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
};
|
||||
qtm_e_therm {
|
||||
reg = <PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_se7_i2c {
|
||||
status = "ok"
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
nq@28 {
|
||||
compatible = "qcom,sn-nci";
|
||||
reg = <0x28>;
|
||||
qcom,sn-irq = <&tlmm 9 0x00>;
|
||||
qcom,sn-ven = <&tlmm 48 0x00>;
|
||||
qcom,sn-firm = <&tlmm 8 0x00>;
|
||||
qcom,sn-clkreq = <&tlmm 7 0x00>;
|
||||
qcom,sn-vdd-1p8-supply = <&L9A>;
|
||||
qcom,sn-vdd-1p8-voltage = <1800000 1800000>;
|
||||
qcom,sn-vdd-1p8-current = <157000>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <9 0>;
|
||||
interrupt-names = "nfc_irq";
|
||||
pinctrl-names = "nfc_active", "nfc_suspend";
|
||||
pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
|
||||
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
|
||||
&pm8008_8 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pm8008_9 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&soc {
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
label = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&key_vol_up_default>;
|
||||
|
||||
vol_up {
|
||||
label = "volume_up";
|
||||
gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <1>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpio-key,wakeup;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
};
|
||||
};
|
||||
|
||||
ldo_vib {
|
||||
compatible = "moto,vibrator-ldo";
|
||||
moto,vib-ldo-gpio = <&tlmm 101 0x0>;
|
||||
status = "ok"
|
||||
};
|
||||
|
||||
mcd {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&mot_batterydata {
|
||||
df-serialnum = "SB18C77591";
|
||||
qcom,batt-id-range-pct = <15>;
|
||||
#include "qg-batterydata-jk50-atl-5000mah.dtsi"
|
||||
#include "qg-batterydata-jk50-scud-5000mah.dtsi"
|
||||
};
|
||||
|
||||
&thermal_zones {
|
||||
sdm-skin-therm-usr {
|
||||
status = "disabled";
|
||||
};
|
||||
rear-cam-therm-usr {
|
||||
status = "disabled";
|
||||
};
|
||||
camera-therm-usr {
|
||||
status = "disabled";
|
||||
};
|
||||
quiet-therm-usr {
|
||||
status = "disabled";
|
||||
};
|
||||
pa-therm0-usr {
|
||||
status = "disabled";
|
||||
};
|
||||
pa-therm1-usr {
|
||||
status = "disabled";
|
||||
};
|
||||
xo-therm-usr {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
msm_therm {
|
||||
polling-delay-passive = <5000>;
|
||||
polling-delay = <20000>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pm6125_adc_tm_iio ADC5_GPIO1_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cam_flash_therm {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pm6125_adc_tm ADC5_GPIO3_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pa_therm2 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pm6125_adc_tm ADC5_GPIO4_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pa_therm1 {
|
||||
polling-delay-passive = <5000>;
|
||||
polling-delay = <20000>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pm6125_adc_tm ADC5_AMUX_THM1_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
quiet_therm {
|
||||
polling-delay-passive = <5000>;
|
||||
polling-delay = <20000>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pm6125_adc_tm ADC5_AMUX_THM2_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
xo_therm {
|
||||
polling-delay-passive = <5000>;
|
||||
polling-delay = <20000>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
chg_therm {
|
||||
polling-delay-passive = <5000>;
|
||||
polling-delay = <20000>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb_therm {
|
||||
polling-delay-passive = <5000>;
|
||||
polling-delay = <20000>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
qtm_n_therm {
|
||||
polling-delay-passive = <5000>;
|
||||
polling-delay = <20000>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
qtm_e_therm {
|
||||
polling-delay-passive = <5000>;
|
||||
polling-delay = <20000>;
|
||||
thermal-governor = "user_space";
|
||||
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
||||
wake-capable-sensor;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&qupv3_se8_i2c {
|
||||
|
||||
status = "ok"
|
||||
|
||||
sx937x@2c {
|
||||
compatible = "Semtech,sx937x";
|
||||
reg = <0x2c>;
|
||||
pinctrl-names = "default","sleep";
|
||||
pinctrl-0 = <&sar_int_default>;
|
||||
pinctrl-1 = <&sar_int_sleep>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <24 0x02>;
|
||||
interrupt-names = "sx937x_irq";
|
||||
Semtech,nirq-gpio = <&tlmm 24 0x02>;
|
||||
//please fix me
|
||||
cap_vdd-supply = <&L9A>;
|
||||
/*use PH4/5/6 as the reference sensor
|
||||
set it to 0xff if the ref-phases-x is not used*/
|
||||
Semtech,ref-phases-a = <5>;
|
||||
Semtech,ref-phases-b = <6>;
|
||||
Semtech,ref-phases-c = <0xff>;
|
||||
Semtech,button-flag = <0x1f>;
|
||||
Semtech,reg-num = <61>;
|
||||
Semtech,reg-init = <
|
||||
0x4004 0x70
|
||||
0x4008 0x8
|
||||
0x8020 0x32
|
||||
0x8028 0x88E
|
||||
0x8034 0x86E
|
||||
0x8040 0x88E
|
||||
0x804C 0xE96
|
||||
0x8058 0x46E
|
||||
0x8064 0x88E
|
||||
0x8070 0x86E
|
||||
0x807C 0x85E
|
||||
0x8030 0xFFF9FD
|
||||
0x803C 0xFEF9FF
|
||||
0x8048 0xFFD9FF
|
||||
0x8054 0xFFF97F
|
||||
0x8060 0xBFF9FF
|
||||
0x806C 0xFFF9EF
|
||||
0x8078 0xF7F9FF
|
||||
0x8084 0xFFFFFF
|
||||
0x8098 0x3F2C
|
||||
0x80B8 0x3620
|
||||
0x80D8 0x3821
|
||||
0x80F8 0x2B24
|
||||
0x8118 0x263C
|
||||
0x8138 0xC8
|
||||
0x8158 0xC8
|
||||
0x8178 0xC8
|
||||
0x80A0 0x222200E1
|
||||
0x80C0 0x141400E2
|
||||
0x80E0 0x232300E1
|
||||
0x8100 0x202000E0
|
||||
0x8120 0x2F2F00E2
|
||||
0x8140 0x0
|
||||
0x8160 0x0
|
||||
0x8180 0x0
|
||||
0x8188 0x8000015
|
||||
0x818C 0x8000016
|
||||
0x8190 0x0
|
||||
0x8194 0x0
|
||||
0x8090 0x54C45000
|
||||
0x80B0 0x2AE27000
|
||||
0x80D0 0x54D45000
|
||||
0x80F0 0x2AE27000
|
||||
0x8110 0x2AE27000
|
||||
0x8130 0x2AD67000
|
||||
0x8150 0x2AD67000
|
||||
0x8170 0x2AD66000
|
||||
0x8088 0x300000
|
||||
0x80A8 0x300000
|
||||
0x80C8 0x300000
|
||||
0x80E8 0x300000
|
||||
0x8108 0x300000
|
||||
0x8128 0x300000
|
||||
0x8148 0x300000
|
||||
0x8168 0x300000
|
||||
0x808C 0x60200018
|
||||
0x80AC 0x60200018
|
||||
0x80CC 0x60200018
|
||||
0x80EC 0x60200018
|
||||
0x810C 0x60200018
|
||||
0x812C 0x60200018
|
||||
0x814C 0x60200018
|
||||
0x816C 0x60200018
|
||||
0x8024 0x7F7F
|
||||
>;
|
||||
status = "ok"
|
||||
};
|
||||
};
|
||||
|
||||
&qusb_phy0 {
|
||||
qcom,qusb-phy-init-seq =
|
||||
/* <value reg_offset> */
|
||||
<0x23 0x210 /* PWR_CTRL1 */
|
||||
0x03 0x04 /* PLL_ANALOG_CONTROLS_TWO */
|
||||
0x7c 0x18c /* PLL_CLOCK_INVERTERS */
|
||||
0x80 0x2c /* PLL_CMODE */
|
||||
0x0a 0x184 /* PLL_LOCK_DELAY */
|
||||
0x19 0xb4 /* PLL_DIGITAL_TIMERS_TWO */
|
||||
0x40 0x194 /* PLL_BIAS_CONTROL_1 */
|
||||
0x16 0x198 /* PLL_BIAS_CONTROL_2 */
|
||||
0x21 0x214 /* PWR_CTRL2 */
|
||||
0x08 0x220 /* IMP_CTRL1 */
|
||||
0x58 0x224 /* IMP_CTRL2 */
|
||||
0x37 0x240 /* TUNE1 */
|
||||
0x29 0x244 /* TUNE2 */
|
||||
0xca 0x248 /* TUNE3 */
|
||||
0x04 0x24c /* TUNE4 */
|
||||
0x03 0x250 /* TUNE5 */
|
||||
0x30 0x23c /* CHG_CTRL2 */
|
||||
0x22 0x210>; /* PWR_CTRL1 */
|
||||
|
||||
qcom,qusb-phy-host-init-seq =
|
||||
/* <value reg_offset> */
|
||||
<0x23 0x210 /* PWR_CTRL1 */
|
||||
0x03 0x04 /* PLL_ANALOG_CONTROLS_TWO */
|
||||
0x7c 0x18c /* PLL_CLOCK_INVERTERS */
|
||||
0x80 0x2c /* PLL_CMODE */
|
||||
0x0a 0x184 /* PLL_LOCK_DELAY */
|
||||
0x19 0xb4 /* PLL_DIGITAL_TIMERS_TWO */
|
||||
0x40 0x194 /* PLL_BIAS_CONTROL_1 */
|
||||
0x16 0x198 /* PLL_BIAS_CONTROL_2 */
|
||||
0x21 0x214 /* PWR_CTRL2 */
|
||||
0x08 0x220 /* IMP_CTRL1 */
|
||||
0x58 0x224 /* IMP_CTRL2 */
|
||||
0x37 0x240 /* TUNE1 */
|
||||
0x29 0x244 /* TUNE2 */
|
||||
0xca 0x248 /* TUNE3 */
|
||||
0x04 0x24c /* TUNE4 */
|
||||
0x03 0x250 /* TUNE5 */
|
||||
0x30 0x23c /* CHG_CTRL2 */
|
||||
0x22 0x210>; /* PWR_CTRL1 */
|
||||
};
|
||||
|
|
@ -13,7 +13,7 @@
|
|||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include "holi-penang-common-overlay.dtsi"
|
||||
#include "holi-penang-common-jp-overlay.dtsi"
|
||||
|
||||
/ {
|
||||
model = "penang";
|
||||
|
|
|
|||
Loading…
Reference in a new issue