From 2b48dd167c3bc597995b6fd5a46ecfd7254294ef Mon Sep 17 00:00:00 2001 From: Ashish Bhimanpalliwar Date: Sat, 12 Jun 2021 14:01:53 +0530 Subject: [PATCH] ARM: dts: msm: Updating ATP platform dtb for blair target Change to update ATP platform dtb to avoid conflicts with other target platforms for blair target. Change-Id: I2a9faa8d4e0e3699c32b8c41d888f38d10770c94 --- qcom/blair-atp.dtsi | 311 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 305 insertions(+), 6 deletions(-) diff --git a/qcom/blair-atp.dtsi b/qcom/blair-atp.dtsi index f4363bcfac46..0626eec24cc3 100644 --- a/qcom/blair-atp.dtsi +++ b/qcom/blair-atp.dtsi @@ -1,3 +1,11 @@ +#include "holi-audio-overlay.dtsi" +#include +#include +#include "holi-pmic-overlay.dtsi" +#include "display/holi-sde-display-atp.dtsi" +#include "holi-thermal-overlay.dtsi" +#include + &rpm_bus { /* Delete all PM6125 and PMR735a rpm-regulators */ /delete-node/ rpm-regulator-smpa6; @@ -323,11 +331,6 @@ }; }; -&ufsphy_mem { - compatible = "qcom,ufs-phy-qmp-v4-yupik"; - vdda-phy-max-microamp = <85700>; -}; - #include "pm6350-rpm-regulator.dtsi" #include "pm6150l-rpm-regulator.dtsi" #include "holi-regulators-pm6350.dtsi" @@ -376,7 +379,303 @@ }; }; -#include "holi-atp.dtsi" + + +&sdhc_1 { + status = "ok"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + + vdd-supply = <&L7E>; + qcom,vdd-voltage-level = <2960000 2960000>; + qcom,vdd-current-level = <0 570000>; + + vdd-io-supply = <&L12A>; + qcom,vdd-io-always-on; + qcom,vdd-io-lpm-sup; + qcom,vdd-io-voltage-level = <1800000 1800000>; + qcom,vdd-io-current-level = <325000 325000>; +}; + +&sdhc_2 { + status = "ok"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + vdd-supply = <&L9E>; + qcom,vdd-voltage-level = <2960000 2960000>; + qcom,vdd-current-level = <0 800000>; + + vdd-io-supply = <&L6E>; + qcom,vdd-io-voltage-level = <1800000 2960000>; + qcom,vdd-io-current-level = <0 22000>; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; +}; + +&ufsphy_mem { + compatible = "qcom,ufs-phy-qmp-v4-yupik"; + + vdda-phy-supply = <&L18A>; + vdda-pll-supply = <&L22A>; + vdda-phy-max-microamp = <85700>; + vdda-pll-max-microamp = <18300>; + + status = "ok"; +}; + +&ufshc_mem { + vdd-hba-supply = <&gcc_ufs_phy_gdsc>; + vdd-hba-fixed-regulator; + + vcc-supply = <&L7E>; + vcc-voltage-level = <2950000 2960000>; + vcc-max-microamp = <800000>; + + vccq2-supply = <&L12A>; + vccq2-max-microamp = <800000>; + vccq2-voltage-level = <1800000 1800000>; + + qcom,vddp-ref-clk-supply = <&L22A>; + qcom,vddp-ref-clk-max-microamp = <100>; + + status = "ok"; +}; + +&qupv3_se0_i2c { + status = "ok"; + #address-cells = <1>; + #size-cells = <0>; + nq@28 { + compatible = "qcom,sn-nci"; + reg = <0x28>; + qcom,sn-irq = <&tlmm 9 0x00>; + qcom,sn-ven = <&tlmm 6 0x00>; + qcom,sn-firm = <&tlmm 8 0x00>; + qcom,sn-clkreq = <&tlmm 7 0x00>; + qcom,sn-vdd-1p8-supply = <&L11A>; + qcom,sn-vdd-1p8-voltage = <1800000 1800000>; + qcom,sn-vdd-1p8-current = <157000>; + interrupt-parent = <&tlmm>; + interrupts = <9 0>; + interrupt-names = "nfc_irq"; + pinctrl-names = "nfc_active", "nfc_suspend"; + pinctrl-0 = <&nfc_int_active &nfc_enable_active>; + pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>; + }; +}; + +&soc { + gpio_keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&key_vol_up_default>; + + vol_up { + label = "volume_up"; + gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + linux,can-disable; + }; + }; +}; + +&qupv3_se10_i2c { + status = "disabled"; +}; + +&pm8008_8 { + status = "disabled"; +}; + +&pm8008_9 { + status = "disabled"; +}; + +&pm6150a_amoled { + status = "ok"; +}; + +&pm7250b_charger { + status = "ok"; + #io-channel-cells = <1>; + io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>, + <&pm7250b_vadc ADC5_USB_IN_I>, + <&pm7250b_vadc ADC5_CHG_TEMP>, + <&pm7250b_vadc ADC5_DIE_TEMP>, + <&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>, + <&pm7250b_vadc ADC5_SBUx>, + <&pm7250b_vadc ADC5_VPH_PWR>, + <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>, + <&pm7250b_qg PSY_IIO_RESISTANCE_ID>, + <&pm7250b_qg PSY_IIO_VOLTAGE_NOW>, + <&pm7250b_qg PSY_IIO_TEMP>, + <&pm7250b_qg PSY_IIO_CAPACITY>, + <&pm7250b_qg PSY_IIO_VOLTAGE_OCV>, + <&pm7250b_qg PSY_IIO_VOLTAGE_AVG>, + <&pm7250b_qg PSY_IIO_DEBUG_BATTERY>, + <&pm7250b_qg PSY_IIO_REAL_CAPACITY>, + <&pm7250b_qg PSY_IIO_CC_SOC>, + <&pm7250b_qg PSY_IIO_CURRENT_NOW>, + <&pm7250b_qg PSY_IIO_VOLTAGE_MAX>, + <&pm7250b_qg PSY_IIO_CHARGE_FULL>, + <&pm7250b_qg PSY_IIO_CHARGE_COUNTER>, + <&pm7250b_qg PSY_IIO_CYCLE_COUNT>, + <&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>, + <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>; + io-channel-names = "usb_in_voltage", + "usb_in_current", + "chg_temp", + "die_temp", + "conn_temp", + "sbux_res", + "vph_voltage", + "skin_temp", + "resistance_id", + "voltage_now", + "temp", + "capacity", + "voltage_ocv", + "voltage_avg", + "debug_battery", + "real_capacity", + "cc_soc", + "current_now", + "voltage_max", + "charge_full", + "charge_counter", + "cycle_count", + "charge_full_design", + "time_to_full_now"; + qcom,batteryless-platform; + qcom,sec-charger-config = <0>; + qcom,auto-recharge-soc = <98>; + qcom,step-charging-enable; + qcom,sw-jeita-enable; + qcom,charger-temp-max = <800>; + qcom,smb-temp-max = <800>; + qcom,suspend-input-on-debug-batt; +}; + +&pm7250b_qg { + status = "ok"; + #io-channel-cells = <1>; + io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>, + <&pm7250b_vadc ADC5_BAT_ID_100K_PU>, + <&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>, + <&pm7250b_charger PSY_IIO_RECHARGE_SOC>, + <&pm7250b_charger PSY_IIO_FORCE_RECHARGE>, + <&pm7250b_charger PSY_IIO_CHARGE_DONE>; + io-channel-names = "batt-therm", + "batt-id", + "input_current_limited", + "recharge_soc", + "force_recharge", + "charge_done"; + qcom,qg-iterm-ma = <150>; + qcom,hold-soc-while-full; + qcom,linearize-soc; + qcom,cl-feedback-on; +}; + +&qupv3_se8_i2c { + status = "okay"; + qcom,i2c-touch-active="synaptics,tcm-i2c"; + + synaptics_tcm@20 { + compatible = "synaptics,tcm-i2c"; + reg = <0x20>; + interrupt-parent = <&tlmm>; + interrupts = <22 0x2008>; + pinctrl-names = "pmx_ts_active","pmx_ts_suspend", + "pmx_ts_release"; + pinctrl-0 = <&ts_active>; + pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; + pinctrl-2 = <&pmx_ts_release>; + vdd-supply = <&L11A>; + avdd-supply = <&L6A>; + synaptics,pwr-reg-name = "avdd"; + synaptics,bus-reg-name = "vdd"; + synaptics,irq-gpio = <&tlmm 22 0x2008>; + synaptics,irq-on-state = <0>; + synaptics,reset-gpio = <&tlmm 21 0x00>; + synaptics,reset-on-state = <0>; + synaptics,reset-active-ms = <20>; + synaptics,reset-delay-ms = <200>; + synaptics,power-delay-ms = <200>; + synaptics,ubl-i2c-addr = <0x20>; + synaptics,extend_report; + synaptics,firmware-name = "synaptics_firmware.img"; + + panel = <&dsi_rm69299_visionox_amoled_video + &dsi_rm69299_visionox_amoled_cmd>; + }; +}; + +&pm7250b_charger { + dpdm-supply = <&qusb_phy0>; + + smb5_vbus: qcom,smb5-vbus { + regulator-name = "smb5-vbus"; + }; + + smb5_vconn: qcom,smb5-vconn { + regulator-name = "smb5-vconn"; + }; +}; + +&pm7250b_pdphy { + vdd-pdphy-supply = <&L3A>; + vbus-supply = <&smb5_vbus>; + vconn-supply = <&smb5_vconn>; + + #io-channel-cells = <1>; + io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>, + <&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>, + <&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>, + <&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>, + <&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>, + <&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>, + <&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>, + <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>, + <&pm7250b_charger PSY_IIO_PR_SWAP>, + <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>, + <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>, + <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>, + <&pm7250b_charger PSY_IIO_TYPEC_MODE>, + <&pm7250b_charger PSY_IIO_PE_START>; + io-channel-names = "pd_active", + "typec_cc_orientation", + "connector_type", + "typec_power_role", + "pd_usb_suspend_supported", + "typec_src_rp", + "pd_in_hard_reset", + "pr_current_max", + "pr_swap", + "pd_voltage_min", + "pd_voltage_max", + "real_type", + "typec_mode", + "pe_start"; +}; + +&usb0 { + extcon = <&pm7250b_pdphy>, <&pm7250b_charger>, <&eud>; + + #io-channel-cells = <1>; + io-channels= <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>; + io-channel-names = "chg_type"; +}; &qusb_phy0 { vdd-supply = <&L18A>;