qcacmn: Fix typo "recieve"

Replace typo "recieve" with correct spelling "receive".

Change-Id: I7d88e57b97fa6d217630d4a5d5c365b56e714428
CRs-Fixed: 2238309
This commit is contained in:
Jeff Johnson 2018-05-06 16:25:49 -07:00 • committed by nshrivas
commit 2d821eb0fe
13 changed files with 21 additions and 21 deletions

View file

@ -167,7 +167,7 @@ cdp_disable_enhanced_stats(ol_txrx_soc_handle soc, struct cdp_pdev *pdev)
* @brief Get the desired stats from the message.
*
* @param pdev - the physical device object
* @param stats_base - stats buffer recieved from FW
* @param stats_base - stats buffer received from FW
* @param type - stats type.
* @return - pointer to requested stat identified by type
*/
@ -416,7 +416,7 @@ static inline void cdp_get_dp_htt_stats(ol_txrx_soc_handle soc,
* @brief Parse the stats header and get the payload from the message.
*
* @param pdev - the physical device object
* @param msg_word - stats buffer recieved from FW
* @param msg_word - stats buffer received from FW
* @param msg_len - length of the message
* @param type - place holder for parsed message type
* @param status - place holder for parsed message status

View file

@ -611,7 +611,7 @@ struct cdp_host_stats_ops {
* @brief Get the desired stats from the message.
*
* @param pdev - the physical device object
* @param stats_base - stats buffer recieved from FW
* @param stats_base - stats buffer received from FW
* @param type - stats type.
* @return - pointer to requested stat identified by type
*/

View file

@ -4771,7 +4771,7 @@ void dp_peer_set_mesh_rx_filter(struct cdp_vdev *vdev_hdl, uint32_t val)
/*
* dp_aggregate_pdev_ctrl_frames_stats()- function to agreegate peer stats
* Current scope is bar recieved count
* Current scope is bar received count
*
* @pdev_handle: DP_PDEV handle
*

View file

@ -1306,7 +1306,7 @@ static QDF_STATUS dp_rx_defrag_store_fragment(struct dp_soc *soc,
peer = dp_peer_find_by_id(soc, peer_id);
if (!peer) {
/* We should not recieve anything from unknown peer
/* We should not receive anything from unknown peer
* however, that might happen while we are in the monitor mode.
* We don't need to handle that here
*/

View file

@ -321,7 +321,7 @@ bool hif_ce_service_should_yield(struct hif_softc *scn,
* chooses what to send (buffer address, length). The destination
* side keeps a supply of "anonymous receive buffers" available and
* it handles incoming data as it arrives (when the destination
* recieves an interrupt).
* receives an interrupt).
*
* The sender may send a simple buffer (address/length) or it may
* send a small list of buffers. When a small list is sent, hardware
@ -1712,10 +1712,10 @@ ce_completed_send_next(struct CE_handle *copyeng,
#ifdef ATH_11AC_TXCOMPACT
/* CE engine descriptor reap
* Similar to ce_per_engine_service , Only difference is ce_per_engine_service
* does recieve and reaping of completed descriptor ,
* does receive and reaping of completed descriptor ,
* This function only handles reaping of Tx complete descriptor.
* The Function is called from threshold reap poll routine
* hif_send_complete_check so should not countain recieve functionality
* hif_send_complete_check so should not countain receive functionality
* within it .
*/

View file

@ -2825,7 +2825,7 @@ int hif_pci_bus_resume(struct hif_softc *scn)
* hif_pci_bus_suspend_noirq() - ensure there are no pending transactions
* @scn: hif context
*
* Ensure that if we recieved the wakeup message before the irq
* Ensure that if we received the wakeup message before the irq
* was disabled that the message is pocessed before suspending.
*
* Return: -EBUSY if we fail to flush the tasklets.
@ -2848,7 +2848,7 @@ int hif_pci_bus_suspend_noirq(struct hif_softc *scn)
* hif_pci_bus_resume_noirq() - ensure there are no pending transactions
* @scn: hif context
*
* Ensure that if we recieved the wakeup message before the irq
* Ensure that if we received the wakeup message before the irq
* was disabled that the message is pocessed before suspending.
*
* Return: -EBUSY if we fail to flush the tasklets.

View file

@ -448,7 +448,7 @@ int hif_snoc_bus_resume(struct hif_softc *scn)
* hif_snoc_bus_suspend_noirq() - ensure there are no pending transactions
* @scn: hif context
*
* Ensure that if we recieved the wakeup message before the irq
* Ensure that if we received the wakeup message before the irq
* was disabled that the message is pocessed before suspending.
*
* Return: -EBUSY if we fail to flush the tasklets.

View file

@ -120,7 +120,7 @@ void *qdf_flex_mem_alloc(struct qdf_flex_mem_pool *pool);
/**
* qdf_flex_mem_free() - logically frees @ptr from the pool
* @pool: the pool to return the memory to
* @ptr: a pointer recieved via a call to qdf_flex_mem_alloc()
* @ptr: a pointer received via a call to qdf_flex_mem_alloc()
*
* This function marks the item corresponding to @ptr as unused. If that item
* was the last used item in the segment it belongs to, and the segment was

View file

@ -184,7 +184,7 @@ void policy_mgr_reg_chan_change_callback(struct wlan_objmgr_psoc *psoc,
avoid_freq_ind->chan_list.ch_list,
pm_ctx->unsafe_channel_count *
sizeof(pm_ctx->unsafe_channel_list[0]));
policy_mgr_debug("Channel list update, recieved %d avoided channels",
policy_mgr_debug("Channel list update, received %d avoided channels",
pm_ctx->unsafe_channel_count);
}

View file

@ -2899,7 +2899,7 @@ enum packet_filter_comp_type {
};
/**
* struct rcv_pkt_filter_params - recieve packet filter parameters
* struct rcv_pkt_filter_params - receive packet filter parameters
* @protocolLayer - protocol layer
* @cmpFlag - comparison flag
* @dataLength - data length
@ -2919,7 +2919,7 @@ struct rcv_pkt_filter_params {
};
/**
* struct rcv_pkt_filter_config - recieve packet filter info
* struct rcv_pkt_filter_config - receive packet filter info
* @filterId - filter id
* @filterType - filter type
* @numFieldParams - no of fields

View file

@ -1726,7 +1726,7 @@ struct wmi_soc {
struct wmi_ops *ops;
const uint32_t *svc_ids;
uint32_t wmi_events[wmi_events_max];
/* WMI service bitmap recieved from target */
/* WMI service bitmap received from target */
uint32_t *wmi_service_bitmap;
uint32_t *wmi_ext_service_bitmap;
#ifndef CONFIG_MCL

View file

@ -36,7 +36,7 @@
#include <htc_services.h>
/* pdev_id is used to distinguish the radio for which event
* is recieved. Since non-tlv target has only one radio, setting
* is received. Since non-tlv target has only one radio, setting
* default pdev_id to one to keep rest of the code using WMI APIs unfiorm.
*/
#define WMI_NON_TLV_DEFAULT_PDEV_ID WMI_HOST_PDEV_ID_0
@ -5741,7 +5741,7 @@ static QDF_STATUS extract_service_ready_non_tlv(wmi_unified_t wmi_handle,
cap->max_bcn_ie_size = ev->max_bcn_ie_size;
cap->fw_version = ev->sw_version;
cap->fw_version_1 = ev->sw_version_1;
/* Following caps not recieved in older fw/hw
/* Following caps not received in older fw/hw
* Initialize it as zero(default). */
cap->max_num_scan_channels = 0;
cap->max_supported_macs = 0;
@ -6983,7 +6983,7 @@ static QDF_STATUS extract_rtt_hdr_non_tlv(wmi_unified_t wmi_handle, void *evt_bu
/**
* copy_rtt_report_cfr
* @ev: pointer to destination event pointer
* @report_type: report type recieved in event
* @report_type: report type received in event
* @p: pointer to event data
* @hdump: pointer to destination buffer
* @hdump_len: length of dest buffer

View file

@ -17647,7 +17647,7 @@ static QDF_STATUS extract_ndp_confirm_tlv(wmi_unified_t wmi_handle,
event = (WMI_NDP_CONFIRM_EVENTID_param_tlvs *) data;
fixed_params = (wmi_ndp_confirm_event_fixed_param *)event->fixed_param;
WMI_LOGD("WMI_NDP_CONFIRM_EVENTID(0x%X) recieved. vdev %d, ndp_instance %d, rsp_code %d, reason_code: %d, num_active_ndps_on_peer: %d",
WMI_LOGD("WMI_NDP_CONFIRM_EVENTID(0x%X) received. vdev %d, ndp_instance %d, rsp_code %d, reason_code: %d, num_active_ndps_on_peer: %d",
WMI_NDP_CONFIRM_EVENTID, fixed_params->vdev_id,
fixed_params->ndp_instance_id, fixed_params->rsp_code,
fixed_params->reason_code,
@ -17736,7 +17736,7 @@ static QDF_STATUS extract_ndp_end_rsp_tlv(wmi_unified_t wmi_handle,
event = (WMI_NDP_END_RSP_EVENTID_param_tlvs *) data;
fixed_params = (wmi_ndp_end_rsp_event_fixed_param *)event->fixed_param;
WMI_LOGD("WMI_NDP_END_RSP_EVENTID(0x%X) recieved. transaction_id: %d, rsp_status: %d, reason_code: %d",
WMI_LOGD("WMI_NDP_END_RSP_EVENTID(0x%X) received. transaction_id: %d, rsp_status: %d, reason_code: %d",
WMI_NDP_END_RSP_EVENTID, fixed_params->transaction_id,
fixed_params->rsp_status, fixed_params->reason_code);