From 301909c5767d355b74fe0eb49a0c23e7eae6d85a Mon Sep 17 00:00:00 2001 From: Wu Gao Date: Mon, 19 Mar 2018 17:16:53 +0800 Subject: [PATCH] qcacld-3.0: Remove not used WNI in cfg.txt Cleanup not used WNI CFG in cfg.txt. This is part of FR about WNI and INI CFG. Change-Id: Ib3e0c6be2c70144db300ebb27d07b23a126fdcd4 CRs-Fixed: 2208165 --- core/mac/src/cfg/cfgUtil/cfg.txt | 398 ------------------------------- 1 file changed, 398 deletions(-) diff --git a/core/mac/src/cfg/cfgUtil/cfg.txt b/core/mac/src/cfg/cfgUtil/cfg.txt index 04f5c095b69f..298a729eeff6 100644 --- a/core/mac/src/cfg/cfgUtil/cfg.txt +++ b/core/mac/src/cfg/cfgUtil/cfg.txt @@ -265,22 +265,6 @@ V RW NP SCH 0 65535 1 - -* -* WEP Key Length (5 or 13 bytes) -* - -WNI_CFG_WEP_KEY_LENGTH I 4 5 -V RW NP RESTART -NONE -5 13 5 -V RW NP RESTART -NONE -5 13 5 - -#ENUM 5 5 -#ENUM 13 13 - * * Default Key Table * @@ -314,18 +298,6 @@ LIM #ENUM 2 2 #ENUM 3 3 -* -* Exclude unencrypted frames (WEP) -* - -WNI_CFG_EXCLUDE_UNENCRYPTED I 4 5 -V RW NP -LIM -0 1 0 -V RW NP -LIM -0 1 0 - * * RTS Threshold * @@ -338,31 +310,10 @@ V RW NP HAL 0 1048576 2347 -* -* Short Retry Limit -* - -WNI_CFG_SHORT_RETRY_LIMIT I 4 6 -V RW NP -HAL -0 255 6 -V RW NP -HAL -0 255 6 - * * Long Retry Limit * -WNI_CFG_LONG_RETRY_LIMIT I 4 6 -V RW NP -HAL -0 255 6 -V RW NP -HAL -0 255 6 - - * * Fragmentation Threshold * @@ -496,43 +447,6 @@ NV RW NP NONE 0 0 0 -* -* Beacon Filter Enable/Disable (TU) -* - -WNI_CFG_PS_ENABLE_BCN_FILTER I 4 7 -V RW NP -HAL -0 1 1 -NV RW NP -NONE -0 1 1 - -* -* Heart Beat Enable/Disable (TU) -* - -WNI_CFG_PS_ENABLE_HEART_BEAT I 4 7 -V RW NP -HAL -0 1 1 -NV RW NP -NONE -0 1 1 - -* -* RSSI Monitor Enable/Disable (TU) -* - -WNI_CFG_PS_ENABLE_RSSI_MONITOR I 4 7 -V RW NP -HAL -0 1 0 -NV RW NP -NONE -0 1 0 - - * * PS Data InActivity Timeout (TU) * @@ -545,19 +459,6 @@ NV RW NP NONE 1 255 20 - -* -* RF Settling Time Clk (In US) -* - -WNI_CFG_RF_SETTLING_TIME_CLK I 4 7 -V RW NP -HAL -0 60000 1500 -NV RW NP -NONE -0 60000 1500 - * * Supported Rate Set for 11b * @@ -582,25 +483,6 @@ V RO NP NONE 8 12 18 24 36 48 72 96 108 - -* -* PHY Mode -* - -WNI_CFG_PHY_MODE I 4 9 -V RW NP RESTART -NONE -0 3 0 -V RW NP RESTART -NONE -0 3 0 - -#ENUM 11A 0 -#ENUM 11B 1 -#ENUM 11G 2 -#ENUM NONE 3 - - * *The Dot11 mode can change dynamically on STA * @@ -653,18 +535,6 @@ V RW NP RESTART NONE 0 -* -* Proprietary Operational Rate Set -* - -WNI_CFG_PROPRIETARY_OPERATIONAL_RATE_SET S 4 7 -V RW NP RESTART -NONE -4 1 3 5 7 -V RW NP RESTART -NONE -4 1 3 5 7 - * * BSSID * In IBSS, this can be changed for coalescing, should SME go into IDLE state? @@ -694,19 +564,6 @@ V RW NP RESTART LIM 55 36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252 -* -* Current Channel -* - -WNI_CFG_CURRENT_CHANNEL I 4 9 -V RO NP -NONE -0 165 1 -V RO NP -NONE -0 165 1 - - * * For 11a or pure 11g, use 6Mbps(rateindex 11) * as the default beaconRateIndex and @@ -720,20 +577,6 @@ V RW NP NONE 0 11 5 -* -* For 11b/g, use 1Mbps -* as the default beaconRateIndex and -* nonBeaconRateIndex. -* -WNI_CFG_DEFAULT_RATE_INDEX_24GHZ I 4 9 -V RW NP -NONE -0 31 1 -V RW NP -NONE -0 31 1 - - * ********************************************************* * * Rate adaptation type @@ -1301,15 +1144,9 @@ V RW NP NONE 0 128 27 - * - - - - * Parameter to indicate or not new BSS found * - WNI_CFG_NEW_BSS_FOUND_IND I 4 9 V RW NP NONE @@ -2089,49 +1926,6 @@ NONE #ENUM 11AC_20MHZ_LOW_40MHZ_HIGH 8 #ENUM 11AC_20MHZ_HIGH_40MHZ_HIGH 9 -************************************* -* Feature: Dynamic Retry Rates -************************************* -* -* When the short/long retry count reach the -* adaptive_retry_threshold(0), then the retry0 -* template shall be used -* -WNI_CFG_DYNAMIC_THRESHOLD_ZERO I 4 12 -V RW NP -HAL -0 255 2 -V RW NP -HAL -0 255 2 - -* -* When the short/long retry count reach the -* adaptive_retry_threshold(1), then the retry1 -* template shall be used -* -WNI_CFG_DYNAMIC_THRESHOLD_ONE I 4 12 -V RW NP -HAL -0 255 4 -V RW NP -HAL -0 255 4 - -* -* When the short/long retry count reach the -* adaptive_retry_threshold(2), then the retry2 -* template shall be used -* -WNI_CFG_DYNAMIC_THRESHOLD_TWO I 4 12 -V RW NP -HAL -0 255 6 -V RW NP -HAL -0 255 6 - - * * Trigger Station Background Scan Flag * @@ -3002,22 +2796,6 @@ NV RW NP LIM 1 20 20 - -* -* Period for which Firmware will collect the -* RSSI stats. Its in units of beacon interval. -* Rssi Filter period should always be >= -* the num_beacon_per_rssi_average. -* -WNI_CFG_RSSI_FILTER_PERIOD I 4 5 -V RW NP -LIM -0 255 5 -NV RW NP -LIM -0 255 5 - - WNI_CFG_MIN_RSSI_THRESHOLD I 4 5 V RW NP LIM @@ -3053,23 +2831,6 @@ V RW NP LIM 0 1 1 - -* -* Ignore DTIM support - If disabled(value=0), HAL will -* try to align the Listen Interval to the DTIM -* period and the following rules will be applied: -* 1) If LI=DTIM, then set LI=DTIM -* 2) If LIDTIM, then set LI=DTIM -* -WNI_CFG_IGNORE_DTIM I 4 5 -V RW NP -NONE -0 1 0 -V RW NP -NONE -0 1 0 - * ********************************************************* * * WoWLAN Configuration The following configurations @@ -3228,19 +2989,6 @@ V RW NP LIM 55 36 40 44 48 52 56 60 64 1 6 11 34 38 42 46 2 3 4 5 7 8 9 10 12 13 14 100 104 108 112 116 120 124 128 132 136 140 149 151 153 155 157 159 161 50 54 58 62 240 242 244 246 248 250 252 - -* -* AMPDU default TX medium Time (in us) -* -WNI_CFG_MAX_MEDIUM_TIME I 4 8 -V RW NP -HAL -0 65535 2048 -V RW NP -HAL -0 65535 2048 - - * * Maximum number of MPDUs in single A-MPDU. * @@ -3375,19 +3123,6 @@ V RW NP NONE 0 0 - -* -* Include Additional IEs in probe response/beacon. -* -WNI_CFG_PROBE_RSP_BCN_ADDNIE_FLAG I 4 0 -V RW NP -LIM -0 1 0 -V RW NP -LIM -0 1 0 - - * * Include Additional IEs in probe response/beacon. * @@ -3763,18 +3498,6 @@ V RW NP LIM 0 0xffff 0 -* -* Low gain override -* - -WNI_CFG_LOW_GAIN_OVERRIDE I 4 9 -V RW NP -HAL -0 1 0 -V RW NP -HAL -0 1 0 - * * Listen Mode Enable/Disable * @@ -3933,30 +3656,6 @@ V RW NP HAL 0 0xFF 0 -* -* Config parameter to Enable/Disable Dynamic PS-Poll mechanism -* 0: Disable, x: FW will send x number of NULL frames before switching to PS-Poll mexhanism -* -WNI_CFG_DYNAMIC_PS_POLL_VALUE I 4 7 -V RW NP -HAL -0 0xFF 0 -V RW NP -HAL -0 0xFF 0 - -* -* PS Data InActivity Timeout (TU) -* - -WNI_CFG_PS_NULLDATA_AP_RESP_TIMEOUT I 4 7 -V RW NP -HAL -0 80 0 -NV RW NP -NONE -0 80 0 - * * Config parameter to Enable/Disable Telescopic Bcn Wakeups * 0: Disable, 1: Enable @@ -3970,33 +3669,6 @@ V RW NP HAL 0 1 0 - -* -* Config parameter for Transient LI -* 0: Disable, x: Transient LI -* - -WNI_CFG_TELE_BCN_TRANS_LI I 4 7 -V RW NP -HAL -0 7 3 -V RW NP -HAL -0 7 3 - -* -* Config parameter for Idle bcns for Transient LI -* x: Num Idle bcns before switch to trans LI -* - -WNI_CFG_TELE_BCN_TRANS_LI_IDLE_BCNS I 4 7 -V RW NP -HAL -5 255 10 -V RW NP -HAL -5 255 10 - * * Config parameter for Max LI * 0: Disable, x: Max LI @@ -4010,19 +3682,6 @@ V RW NP HAL 0 7 5 -* -* Config parameter for Idle bcns for max LI -* x: Num Idle bcns before switch to max LI -* - -WNI_CFG_TELE_BCN_MAX_LI_IDLE_BCNS I 4 7 -V RW NP -HAL -5 255 15 -V RW NP -HAL -5 255 15 - * * BTC DHCP No of Bt sub interval during DHCP * @@ -4093,20 +3752,6 @@ V RW NP NONE 0 0x5 0 -* -* Softap data available poll period (in milliseconds) for -* queueing (Qos)Null frames to the station if there -* is no data available and PS-Poll/Trigger frame is pending. -* 0 = disabled. Recommended values is 5ms -* -WNI_CFG_AP_DATA_AVAIL_POLL_PERIOD I 4 8 -V RW NP -NONE -0 65535 5 -V RW NP -NONE -0 65535 5 - * * Close loop power control will be enabled if value is set to 1 * @@ -4181,19 +3826,6 @@ V RW NP HAL 0 1 0 -* -* Low Power Image Transition will be enabled if value is set to 1 -* -* -* -WNI_CFG_ENABLE_LPWR_IMG_TRANSITION I 4 0 -V RW NP -NONE -0 1 0 -V RW NP -NONE -0 1 0 - * * MCC Adaptive Scheduler will be enabled if value is set to 1 * @@ -4301,20 +3933,6 @@ V RW NP RESTART NONE 10 2000 200 - -* -*MCC ENABLE/DISABLE ADAPTIVE RX Drain feature -* -* -* -WNI_CFG_ENABLE_ADAPT_RX_DRAIN I 4 7 -V RW NP -HAL -0 1 1 -NV RW NP -HAL -0 1 1 - * * FlexConnect Power Factor * Default is set to 0 (disable) @@ -4328,22 +3946,6 @@ V RW NP NONE 0 9 0 -* -* Antenna Diversity -* -* 0 = disabled -* 1 = Ant 1 -* 2 = Ant 2 -* 3 = Adaptive -* -WNI_CFG_ANTENNA_DIVESITY I 4 7 -V RW NP -HAL -0 3 0 -V RW NP -HAL -0 3 0 - * GO Link Monitor Timeout (TU) * WNI_CFG_GO_LINK_MONITOR_TIMEOUT I 4 7