diff --git a/qcom/sdxlemur-mtp-mbb.dtsi b/qcom/sdxlemur-mtp-mbb.dtsi index e3536f60a70b..a88fe19912ae 100644 --- a/qcom/sdxlemur-mtp-mbb.dtsi +++ b/qcom/sdxlemur-mtp-mbb.dtsi @@ -1,6 +1,7 @@ #include "sdxlemur-mtp.dtsi" #include "pm7250b.dtsi" #include +#include #include #include "sdxlemur-cnss.dtsi" #include "sdxlemur-mtp-audio-overlay.dtsi" @@ -49,6 +50,10 @@ qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; + + smb1390_therm@e { + qcom,scale-fn-type = ; + }; }; &pm7250b_adc_tm { @@ -135,7 +140,14 @@ <&pm7250b_qg PSY_IIO_CHARGE_COUNTER>, <&pm7250b_qg PSY_IIO_CYCLE_COUNT>, <&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>, - <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>; + <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>, + <&smb1394_div2_cp_primary PSY_IIO_PARALLEL_MODE>, + <&smb1394_div2_cp_primary PSY_IIO_PARALLEL_OUTPUT_MODE>, + <&smb1394_div2_cp_primary PSY_IIO_MIN_ICL>, + <&smb1394_div2_cp_primary PSY_IIO_CP_SWITCHER_EN>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ILIM>, + <&smb1394_div2_cp_primary PSY_IIO_CP_DIE_TEMP>; io-channel-names = "usb_in_voltage", "usb_in_current", "chg_temp", @@ -159,8 +171,16 @@ "charge_counter", "cycle_count", "charge_full_design", - "time_to_full_now"; + "time_to_full_now", + "cp_parallel_mode", + "cp_parallel_output_mode", + "cp_min_icl", + "cp_switcher_en", + "cp_enable", + "cp_ilim", + "cp_die_temp"; qcom,battery-data = <&mbb_batterydata>; + qcom,sec-charger-config = <1>; qcom,auto-recharge-soc = <98>; qcom,step-charging-enable; qcom,sw-jeita-enable; @@ -192,13 +212,15 @@ <&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>, <&pm7250b_charger PSY_IIO_RECHARGE_SOC>, <&pm7250b_charger PSY_IIO_FORCE_RECHARGE>, - <&pm7250b_charger PSY_IIO_CHARGE_DONE>; + <&pm7250b_charger PSY_IIO_CHARGE_DONE>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>; io-channel-names = "batt-therm", "batt-id", "input_current_limited", "recharge_soc", "force_recharge", - "charge_done"; + "charge_done", + "cp_charging_enabled"; qcom,battery-data = <&mbb_batterydata>; qcom,qg-iterm-ma = <150>; qcom,hold-soc-while-full; @@ -208,6 +230,7 @@ qcom,fvss-enable; qcom,fvss-vbatt-mv = <3300>; qcom,bass-enable; + qcom,use-cp-iin-sns; }; &pm7250b_pdphy { @@ -246,6 +269,53 @@ "pe_start"; }; +&pm7250b_gpios { + smb_stat { + smb_stat_default: smb_stat_default { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,pull-up-strength = ; + power-source = <0>; + }; + }; +}; + +&i2c_3 { + status = "ok"; + #include "smb1394.dtsi" +}; + +&smb1394 { + interrupts = <0x2 0xc5 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&spmi_bus>; + interrupt-names = "smb1394"; + pinctrl-names = "default"; + pinctrl-0 = <&smb_stat_default>; + status = "ok"; +}; + +&smb1394_div2_cp_primary { + io-channels = <&pm7250b_vadc ADC5_AMUX_THM2>, + <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>, + <&pm7250b_charger PSY_IIO_ADAPTER_CC_MODE>, + <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>, + <&pm7250b_charger PSY_IIO_USB_INPUT_CURRENT_SETTLED>, + <&pm7250b_charger PSY_IIO_SMB_EN_MODE>, + <&pm7250b_charger PSY_IIO_SMB_EN_REASON>; + io-channel-names = "die_temp", + "real_type", + "adapter_cc_mode", + "pd_current_max", + "input_current_settled", + "smb_en_mode", + "smb_en_reason"; + qcom,parallel-input-mode = <1>; /* USBIN */ + qcom,parallel-output-mode = <2>; /* VBAT */ + status = "ok"; +}; + &usb { extcon = <&pm7250b_pdphy>, <&eud>; diff --git a/qcom/sdxlemur-rcm-rc.dtsi b/qcom/sdxlemur-rcm-rc.dtsi index 3a8803520408..a1c20370dd86 100644 --- a/qcom/sdxlemur-rcm-rc.dtsi +++ b/qcom/sdxlemur-rcm-rc.dtsi @@ -1,6 +1,7 @@ #include "sdxlemur-pmic-overlay.dtsi" #include "pm7250b.dtsi" #include +#include #include #include "sdxlemur-cnss.dtsi" @@ -70,6 +71,10 @@ qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; + + smb1390_therm@e { + qcom,scale-fn-type = ; + }; }; &pm7250b_adc_tm { @@ -156,7 +161,14 @@ <&pm7250b_qg PSY_IIO_CHARGE_COUNTER>, <&pm7250b_qg PSY_IIO_CYCLE_COUNT>, <&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>, - <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>; + <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>, + <&smb1394_div2_cp_primary PSY_IIO_PARALLEL_MODE>, + <&smb1394_div2_cp_primary PSY_IIO_PARALLEL_OUTPUT_MODE>, + <&smb1394_div2_cp_primary PSY_IIO_MIN_ICL>, + <&smb1394_div2_cp_primary PSY_IIO_CP_SWITCHER_EN>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ILIM>, + <&smb1394_div2_cp_primary PSY_IIO_CP_DIE_TEMP>; io-channel-names = "usb_in_voltage", "usb_in_current", "chg_temp", @@ -180,8 +192,16 @@ "charge_counter", "cycle_count", "charge_full_design", - "time_to_full_now"; + "time_to_full_now", + "cp_parallel_mode", + "cp_parallel_output_mode", + "cp_min_icl", + "cp_switcher_en", + "cp_enable", + "cp_ilim", + "cp_die_temp"; qcom,battery-data = <&rcm_batterydata>; + qcom,sec-charger-config = <1>; qcom,auto-recharge-soc = <98>; qcom,step-charging-enable; qcom,sw-jeita-enable; @@ -213,13 +233,15 @@ <&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>, <&pm7250b_charger PSY_IIO_RECHARGE_SOC>, <&pm7250b_charger PSY_IIO_FORCE_RECHARGE>, - <&pm7250b_charger PSY_IIO_CHARGE_DONE>; + <&pm7250b_charger PSY_IIO_CHARGE_DONE>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>; io-channel-names = "batt-therm", "batt-id", "input_current_limited", "recharge_soc", "force_recharge", - "charge_done"; + "charge_done", + "cp_charging_enabled"; qcom,battery-data = <&rcm_batterydata>; qcom,qg-iterm-ma = <150>; qcom,hold-soc-while-full; @@ -229,6 +251,7 @@ qcom,fvss-enable; qcom,fvss-vbatt-mv = <3300>; qcom,bass-enable; + qcom,use-cp-iin-sns; }; &pm7250b_pdphy { @@ -267,6 +290,53 @@ "pe_start"; }; +&pm7250b_gpios { + smb_stat { + smb_stat_default: smb_stat_default { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,pull-up-strength = ; + power-source = <0>; + }; + }; +}; + +&i2c_3 { + status = "ok"; + #include "smb1394.dtsi" +}; + +&smb1394 { + interrupts = <0x2 0xc5 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&spmi_bus>; + interrupt-names = "smb1394"; + pinctrl-names = "default"; + pinctrl-0 = <&smb_stat_default>; + status = "ok"; +}; + +&smb1394_div2_cp_primary { + io-channels = <&pm7250b_vadc ADC5_AMUX_THM2>, + <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>, + <&pm7250b_charger PSY_IIO_ADAPTER_CC_MODE>, + <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>, + <&pm7250b_charger PSY_IIO_USB_INPUT_CURRENT_SETTLED>, + <&pm7250b_charger PSY_IIO_SMB_EN_MODE>, + <&pm7250b_charger PSY_IIO_SMB_EN_REASON>; + io-channel-names = "die_temp", + "real_type", + "adapter_cc_mode", + "pd_current_max", + "input_current_settled", + "smb_en_mode", + "smb_en_reason"; + qcom,parallel-input-mode = <1>; /* USBIN */ + qcom,parallel-output-mode = <2>; /* VBAT */ + status = "ok"; +}; + &usb { extcon = <&pm7250b_pdphy>, <&eud>;