From 3a102dd6c96376b6b663d2a5edf192cfea673a9a Mon Sep 17 00:00:00 2001 From: Anil Kumar Kanakanti Date: Wed, 27 Jan 2021 21:43:59 +0530 Subject: [PATCH] ARM: dts: msm: Add support for JD1 sensor for yupik Add support for JD1 sensor for yupik using JD1+GC630 camera DC. CRs-Fixed: 2869700 Change-Id: Iffcdf5062dbf2fcbccdb3cb29848956485339cfc --- yupik-camera-sensor-idp.dtsi | 44 ++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/yupik-camera-sensor-idp.dtsi b/yupik-camera-sensor-idp.dtsi index 38412647ba8d..f4ed67f88ad1 100644 --- a/yupik-camera-sensor-idp.dtsi +++ b/yupik-camera-sensor-idp.dtsi @@ -383,4 +383,48 @@ clock-cntl-level = "nominal"; clock-rates = <24000000>; }; + /* Rear */ + qcom,cam-sensor4 { + cell-index = <1>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_triple_uw>; + actuator-src = <&actuator_triple_uw>; + cam_vio-supply = <&L3J>; + cam_vana-supply = <&L6I>; + cam_vdig-supply = <&L2I>; + cam_clk-supply = <&cam_cc_titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2900000 1150000 0>; + rgltr-load-current = <3000 52000 257000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend", "cam_mux"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2 + &cam_sensor_active_mux>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2 + &cam_sensor_suspend_mux>; + gpios = <&tlmm 66 0>, + <&tlmm 77 0>, + <&tlmm 1 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2", + "CAM_MUX"; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; };