PCI changes for the v4.1 merge window:

Enumeration
     - Read capability list as dwords, not bytes (Sean O. Stalley)
 
   Resource management
     - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas)
     - Mark invalid BARs as unassigned (Bjorn Helgaas)
     - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas)
     - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas)
     - Assign resources before drivers claim devices (Yijing Wang)
     - Claim bus resources before pci_bus_add_devices() (Yijing Wang)
 
   Power management
     - Optimize device state transition delays (Aaron Lu)
     - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett)
 
   Virtualization
     - Add ACS quirks for Intel 1G NICs (Alex Williamson)
 
   IOMMU
     - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri)
     - Move of_dma_configure() to device.c to help re-use (Murali Karicheri)
     - Fix size when dma-range is not used (Murali Karicheri)
     - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri)
     - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri)
     - Update DMA configuration from DT (Murali Karicheri)
     - dma-mapping: limit IOMMU mapping size (Murali Karicheri)
     - Calculate device DMA masks based on DT dma-range size (Murali Karicheri)
 
   ARM Versatile host bridge driver
     - Check for devm_ioremap_resource() failures (Jisheng Zhang)
 
   Broadcom iProc host bridge driver
     - Add Broadcom iProc PCIe driver (Ray Jui)
 
   Marvell MVEBU host bridge driver
     - Add suspend/resume support (Thomas Petazzoni)
 
   Renesas R-Car host bridge driver
     - Fix position of MSI enable bit (Nobuhiro Iwamatsu)
     - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu)
     - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu)
     - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu)
 
   Samsung Exynos host bridge driver
     - Fix INTx enablement statement termination error (Jaehoon Chung)
 
   Miscellaneous
     - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu)
     - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVK/X+AAoJEFmIoMA60/r8hlkP/0e1GhAWA3DGR/+O2OPIkJ2w
 dQVgv5IN5KXGExT9RHiDL/Ib2PhDvdVI26sinjtkw/FcjyzoWVsPDUzCYudQaPSr
 zwzZto7dBzfv+exDN2LOqoSscCORAehApmTgYVg29cofJmKlO2ctDtpem1OT0MQ9
 CMRMoBHhRe4FF3VJPOBPDXYpS89TObrY600aMDGk4S2uBboZI3aeYiTNLXJyh6fX
 vRg3TWnTfQHoZINW/YOqao/WbrRixZbO6q4n2IqhI6i/uaAc1IEALk9im8/2ri/s
 mgb/K5Elq+j4yUGnbFRz62pj/YxwnQKwVO4Nc7P66zENgoOXtv+OGRhlS4+d00/n
 ux0+BkoxJdaL8HQ/b7+uPydiD85lbERM+B2+LQQ7JN+HI+UEcQ0PsK2hSQKb3njD
 uEkktlKZViiqALijpL+vKRFe8U4GRE4KUfVsKHhhPPvY5sQTAZ3DrR36e1zKz2pA
 YJjtaHYW0S/tfoEzi3EnPistbJw5sT0/Waj31QTKb/P0Fr7pHnJfcwV7+unXbKla
 Osz8m6ELIqxhnuzhjlbayh4MKn49n1ZlwkwCnBdjgLQy0KZtxsWZoBg8LeGU077c
 TJXukRfl3H8LvpqGMYaxOyw7yUeKobEWy+Ylo5asFnfFw9h6zvW+Sc97jtBCrm4/
 OZa7rKdPQGGMbQFMvDc2
 =vEVs
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
    - Read capability list as dwords, not bytes (Sean O. Stalley)

  Resource management
    - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas)
    - Mark invalid BARs as unassigned (Bjorn Helgaas)
    - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas)
    - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas)
    - Assign resources before drivers claim devices (Yijing Wang)
    - Claim bus resources before pci_bus_add_devices() (Yijing Wang)

  Power management
    - Optimize device state transition delays (Aaron Lu)
    - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett)

  Virtualization
    - Add ACS quirks for Intel 1G NICs (Alex Williamson)

  IOMMU
    - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri)
    - Move of_dma_configure() to device.c to help re-use (Murali Karicheri)
    - Fix size when dma-range is not used (Murali Karicheri)
    - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri)
    - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri)
    - Update DMA configuration from DT (Murali Karicheri)
    - dma-mapping: limit IOMMU mapping size (Murali Karicheri)
    - Calculate device DMA masks based on DT dma-range size (Murali Karicheri)

  ARM Versatile host bridge driver
    - Check for devm_ioremap_resource() failures (Jisheng Zhang)

  Broadcom iProc host bridge driver
    - Add Broadcom iProc PCIe driver (Ray Jui)

  Marvell MVEBU host bridge driver
    - Add suspend/resume support (Thomas Petazzoni)

  Renesas R-Car host bridge driver
    - Fix position of MSI enable bit (Nobuhiro Iwamatsu)
    - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu)
    - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu)
    - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu)

  Samsung Exynos host bridge driver
    - Fix INTx enablement statement termination error (Jaehoon Chung)

  Miscellaneous
    - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu)
    - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)"

* tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits)
  PCI: Read capability list as dwords, not bytes
  PCI: layerscape: Simplify platform_get_resource_byname() failure checking
  PCI: keystone: Don't dereference possible NULL pointer
  PCI: versatile: Check for devm_ioremap_resource() failures
  PCI: Don't clear ASPM bits when the FADT declares it's unsupported
  PCI: Clarify policy for vendor IDs in pci.txt
  PCI/ACPI: Optimize device state transition delays
  PCI: Export pci_find_host_bridge() for use inside PCI core
  PCI: Make a shareable UUID for PCI firmware ACPI _DSM
  PCI: Fix typo in Thunderbolt kernel message
  PCI: exynos: Fix INTx enablement statement termination error
  PCI: iproc: Add Broadcom iProc PCIe support
  PCI: iproc: Add DT docs for Broadcom iProc PCIe driver
  PCI: Export symbols required for loadable host driver modules
  PCI: Add ACS quirks for Intel 1G NICs
  PCI: mvebu: Add suspend/resume support
  PCI: Cleanup control flow
  sparc/PCI: Claim bus resources before pci_bus_add_devices()
  PCI: Assign resources before drivers claim devices (pci_scan_root_bus())
  PCI: Fail pci_ioremap_bar() on unassigned resources
  ...
This commit is contained in:
Linus Torvalds 2015-04-13 15:45:47 -07:00
commit 3be1b98e07
61 changed files with 1007 additions and 228 deletions

View file

@ -2,6 +2,9 @@
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/of_iommu.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
@ -66,6 +69,87 @@ int of_device_add(struct platform_device *ofdev)
return device_add(&ofdev->dev);
}
/**
* of_dma_configure - Setup DMA configuration
* @dev: Device to apply DMA configuration
* @np: Pointer to OF node having DMA configuration
*
* Try to get devices's DMA configuration from DT and update it
* accordingly.
*
* If platform code needs to use its own special DMA configuration, it
* can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events
* to fix up DMA configuration.
*/
void of_dma_configure(struct device *dev, struct device_node *np)
{
u64 dma_addr, paddr, size;
int ret;
bool coherent;
unsigned long offset;
struct iommu_ops *iommu;
/*
* Set default coherent_dma_mask to 32 bit. Drivers are expected to
* setup the correct supported mask.
*/
if (!dev->coherent_dma_mask)
dev->coherent_dma_mask = DMA_BIT_MASK(32);
/*
* Set it to coherent_dma_mask by default if the architecture
* code has not set it.
*/
if (!dev->dma_mask)
dev->dma_mask = &dev->coherent_dma_mask;
ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
if (ret < 0) {
dma_addr = offset = 0;
size = dev->coherent_dma_mask + 1;
} else {
offset = PFN_DOWN(paddr - dma_addr);
/*
* Add a work around to treat the size as mask + 1 in case
* it is defined in DT as a mask.
*/
if (size & 1) {
dev_warn(dev, "Invalid size 0x%llx for dma-range\n",
size);
size = size + 1;
}
if (!size) {
dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
return;
}
dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
}
dev->dma_pfn_offset = offset;
/*
* Limit coherent and dma mask based on size and default mask
* set by the driver.
*/
dev->coherent_dma_mask = min(dev->coherent_dma_mask,
DMA_BIT_MASK(ilog2(dma_addr + size)));
*dev->dma_mask = min((*dev->dma_mask),
DMA_BIT_MASK(ilog2(dma_addr + size)));
coherent = of_dma_is_coherent(np);
dev_dbg(dev, "device is%sdma coherent\n",
coherent ? " " : " not ");
iommu = of_iommu_configure(dev, np);
dev_dbg(dev, "device is%sbehind an iommu\n",
iommu ? " " : " not ");
arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent);
}
EXPORT_SYMBOL_GPL(of_dma_configure);
int of_device_register(struct platform_device *pdev)
{
device_initialize(&pdev->dev);

View file

@ -2,6 +2,7 @@
#include <linux/export.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_pci.h>
#include <linux/slab.h>
@ -116,6 +117,26 @@ int of_get_pci_domain_nr(struct device_node *node)
}
EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
/**
* of_pci_dma_configure - Setup DMA configuration
* @dev: ptr to pci_dev struct of the PCI device
*
* Function to update PCI devices's DMA configuration using the same
* info from the OF node of host bridge's parent (if any).
*/
void of_pci_dma_configure(struct pci_dev *pci_dev)
{
struct device *dev = &pci_dev->dev;
struct device *bridge = pci_get_host_bridge_device(pci_dev);
if (!bridge->parent)
return;
of_dma_configure(dev, bridge->parent->of_node);
pci_put_host_bridge_device(bridge);
}
EXPORT_SYMBOL_GPL(of_pci_dma_configure);
#if defined(CONFIG_OF_ADDRESS)
/**
* of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT

View file

@ -19,7 +19,6 @@
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_iommu.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
@ -150,59 +149,6 @@ struct platform_device *of_device_alloc(struct device_node *np,
}
EXPORT_SYMBOL(of_device_alloc);
/**
* of_dma_configure - Setup DMA configuration
* @dev: Device to apply DMA configuration
*
* Try to get devices's DMA configuration from DT and update it
* accordingly.
*
* In case if platform code need to use own special DMA configuration,it
* can use Platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE event
* to fix up DMA configuration.
*/
static void of_dma_configure(struct device *dev)
{
u64 dma_addr, paddr, size;
int ret;
bool coherent;
unsigned long offset;
struct iommu_ops *iommu;
/*
* Set default dma-mask to 32 bit. Drivers are expected to setup
* the correct supported dma_mask.
*/
dev->coherent_dma_mask = DMA_BIT_MASK(32);
/*
* Set it to coherent_dma_mask by default if the architecture
* code has not set it.
*/
if (!dev->dma_mask)
dev->dma_mask = &dev->coherent_dma_mask;
ret = of_dma_get_range(dev->of_node, &dma_addr, &paddr, &size);
if (ret < 0) {
dma_addr = offset = 0;
size = dev->coherent_dma_mask;
} else {
offset = PFN_DOWN(paddr - dma_addr);
dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
}
dev->dma_pfn_offset = offset;
coherent = of_dma_is_coherent(dev->of_node);
dev_dbg(dev, "device is%sdma coherent\n",
coherent ? " " : " not ");
iommu = of_iommu_configure(dev);
dev_dbg(dev, "device is%sbehind an iommu\n",
iommu ? " " : " not ");
arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent);
}
static void of_dma_deconfigure(struct device *dev)
{
arch_teardown_dma_ops(dev);
@ -236,7 +182,7 @@ static struct platform_device *of_platform_device_create_pdata(
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
of_dma_configure(&dev->dev);
of_dma_configure(&dev->dev, dev->dev.of_node);
if (of_device_add(dev) != 0) {
of_dma_deconfigure(&dev->dev);
@ -299,7 +245,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
of_dma_configure(&dev->dev);
of_dma_configure(&dev->dev, dev->dev.of_node);
/* Allow the HW Peripheral ID to be overridden */
prop = of_get_property(node, "arm,primecell-periphid", NULL);