diff --git a/bindings/cnss/cnss-wlan.txt b/bindings/cnss/cnss-wlan.txt
index f9ab0e0b90a4..73828aaebeb9 100644
--- a/bindings/cnss/cnss-wlan.txt
+++ b/bindings/cnss/cnss-wlan.txt
@@ -12,6 +12,7 @@ provides the reserved RAM dump memory location and size.
 
 Required properties:
   - compatible: "qcom,cnss" for QCA6174 device
+                "qcom,cnss_sdio" for TF device
                 "qcom,cnss-qca6290" for QCA6290 device
                 "qcom,cnss-qca6390" for QCA6390 device
                 "qcom,cnss-qca6490" for QCA6490 device
diff --git a/qcom/sdxnightjar-cnss.dtsi b/qcom/sdxnightjar-cnss.dtsi
new file mode 100644
index 000000000000..5d4c7bd08918
--- /dev/null
+++ b/qcom/sdxnightjar-cnss.dtsi
@@ -0,0 +1,41 @@
+
+&soc {
+	cnss_pcie: qcom,cnss {
+		compatible = "qcom,cnss";
+		wlan-en-gpio = <&tlmm_pinmux 95 0>;
+		vdd-wlan-supply = <&rome_vreg>;
+		vdd-wlan-xtal-supply = <&pmd9650_l5>;
+		vdd-wlan-io-supply = <&pmd9650_l6>;
+		vdd-wlan-xtal-aon-supply = <&pmd9650_l4>;
+		qcom,notify-modem-status;
+		pinctrl-names = "wlan_en_active", "wlan_en_sleep";
+		pinctrl-0 = <&cnss_wlan_en_active>;
+		pinctrl-1 = <&cnss_wlan_en_sleep>;
+		qcom,wlan-rc-num = <0>;
+		qcom,wlan-ramdump-dynamic = <0x200000>;
+
+		qcom,msm-bus,name = "msm-cnss";
+		qcom,msm-bus,num-cases = <4>;
+		qcom,msm-bus,num-paths = <2>;
+		qcom,msm-bus,vectors-KBps =
+			<45 512 0 0>, <1 512 0 0>,
+			/* Upto 200 Mbps */
+			<45 512 41421 655360>, <1 512 41421 655360>,
+			/* Upto 400 Mbps */
+			<45 512 98572 655360>, <1 512 98572 1600000>,
+			/* Upto 800 Mbps */
+			<45 512 207108 1146880>, <1 512 207108 3124992>;
+	};
+
+	cnss_sdio: qcom,cnss_sdio {
+		compatible = "qcom,cnss_sdio";
+		subsys-name = "AR6320_SDIO";
+		vdd-wlan-xtal-supply = <&pmd9650_l5>;
+		vdd-wlan-io-supply = <&pmd9650_l6>;
+		qcom,wlan-ramdump-dynamic = <0x200000>;
+		pinctrl-names = "active", "sleep";
+		pinctrl-0 = <&cnss_sdio_active>;
+		pinctrl-1 = <&cnss_sdio_sleep>;
+		qcom,is-antenna-shared;
+	};
+};
diff --git a/qcom/sdxnightjar-pinctrl.dtsi b/qcom/sdxnightjar-pinctrl.dtsi
index ac2ca4510732..6f34c29c1b38 100644
--- a/qcom/sdxnightjar-pinctrl.dtsi
+++ b/qcom/sdxnightjar-pinctrl.dtsi
@@ -1400,4 +1400,15 @@
 		qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_1P5>;	/* Pull up 1.5 uA */
 		power-source = <1>;     /* 1.8 V */
 	};
+
+	gpio@c500 { /* GPIO 6 - Rome 3.3V control */
+		status = "ok";
+		qcom,mode = <1>;		/* Digital output*/
+		qcom,output-type = <0>;		/* CMOS logic */
+		qcom,invert = <1>;		/* Output high */
+		qcom,vin-sel = <0>;		/* VPH_PWR */
+		qcom,src-sel = <0>;		/* Constant */
+		qcom,out-strength = <1>;	/* High drive strength */
+		qcom,master-en = <1>;		/* Enable GPIO */
+	};
 };
diff --git a/qcom/sdxnightjar-regulator.dtsi b/qcom/sdxnightjar-regulator.dtsi
index 3de4186dbb5b..d381a0a2996a 100644
--- a/qcom/sdxnightjar-regulator.dtsi
+++ b/qcom/sdxnightjar-regulator.dtsi
@@ -263,7 +263,7 @@
 		regulator-name = "rome_vreg";
 		startup-delay-us = <4000>;
 		enable-active-high;
-		gpio = <&pmd9650_gpios 6 0>;
+		gpios = <&pmd9650_gpios 6 0>;
 	};
 
 	/* SD card 2.95 V supply */
diff --git a/qcom/sdxnightjar.dtsi b/qcom/sdxnightjar.dtsi
index 65b5885279f7..00ea3f6a2f57 100644
--- a/qcom/sdxnightjar.dtsi
+++ b/qcom/sdxnightjar.dtsi
@@ -1022,6 +1022,7 @@
 #include "sdxnightjar-pinctrl.dtsi"
 #include "sdxnightjar-ion.dtsi"
 #include "sdxnightjar-blsp.dtsi"
+#include "sdxnightjar-cnss.dtsi"
 #include "sdxnightjar-pcie.dtsi"
 
 &i2c_3 {