diff --git a/qcom/yupik-idp-hsp.dtsi b/qcom/yupik-idp-hsp.dtsi
index 2bcd7f793027..b510f487a94b 100644
--- a/qcom/yupik-idp-hsp.dtsi
+++ b/qcom/yupik-idp-hsp.dtsi
@@ -2,7 +2,15 @@
 #include "qcx6490-cnss.dtsi"
 
 &wlan {
+	reg = <0xb0000000 0x10000>,
+	      <0xb2e5510 0x5c0>;
+	reg-names = "smmu_iova_ipa", "tcs_cmd";
 	qcom,same-dt-multi-dev;
+	qcom,sw-ctrl-gpio = <&tlmm 86 0>;
+	use-pm-domain;
+	cnss-enable-self-recovery;
+	/* RPMH_PDC_WLAN_RF_TCS<6>_CMD<0> offset */
+	qcom,tcs_offset_int_pow_amp_vreg = <0x4B0>;
 };
 
 &pcie0 {
@@ -12,55 +20,3 @@
 &pcie0_msi {
 	status = "ok";
 };
-
-&pcie1 {
-	status = "ok";
-	qcom,boot-option = <0x0>;
-	qcom,ep-gpio = <&tlmm 19 0>;
-	pinctrl-0 = <&pcie1_perst_default
-			&pcie1_clkreq_default
-			&pcie1_wake_default
-			&pcie1_ep_default>;
-	pinctrl-1 = <&pcie1_perst_default
-			&pcie1_clkreq_sleep
-			&pcie1_wake_default
-			&pcie1_ep_default>;
-};
-
-&pcie1_msi {
-	status = "ok";
-};
-
-&pm7325_gpios {
-	usb2_vbus_boost {
-		usb2_vbus_boost_default: usb2_vbus_boost_default {
-			pins = "gpio8";
-			function = "normal";
-			output-low;
-			power-source = <0>;	/* 1.8V input supply */
-		};
-	};
-};
-
-&soc {
-	usb2_vbus_boost_reg: usb2_vbus_boost_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "usb2_vbus_boost_vreg";
-		startup-delay-us = <4000>;
-		enable-active-high;
-		gpios = <&pm7325_gpios 8 0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_boost_default>;
-	};
-};
-
-&usb1 {
-	vbus_dwc3-supply = <&usb2_vbus_boost_reg>;
-	qcom,default-mode-none;
-	status = "ok";
-};
-
-&usb2_phy1 {
-	status = "ok";
-};