Merge branch 'master' into for-next

Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.

drivers/spi/atmel_spi.c

@@ -352,8 +352,12 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
 
 	xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
 	if (xfer->tx_buf) {
+		/* tx_buf is a const void* where we need a void * for the dma
+		 * mapping */
+		void *nonconst_tx = (void *)xfer->tx_buf;
+
 		xfer->tx_dma = dma_map_single(dev,
-				(void *) xfer->tx_buf, xfer->len,
+				nonconst_tx, xfer->len,
 				DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, xfer->tx_dma))
 			return -ENOMEM;

drivers/spi/dw_spi.c

@@ -413,6 +413,11 @@ static void poll_transfer(struct dw_spi *dws)
 {
 	while (dws->write(dws))
 		dws->read(dws);
+	/*
+	 * There is a possibility that the last word of a transaction
+	 * will be lost if data is not ready. Re-read to solve this issue.
+	 */
+	dws->read(dws);
 
 	transfer_complete(dws);
 }

drivers/spi/spi.c

@@ -29,11 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/of_spi.h>
 
-
-/* SPI bustype and spi_master class are registered after board init code
- * provides the SPI device tables, ensuring that both are present by the
- * time controller driver registration causes spi_devices to "enumerate".
- */
 static void spidev_release(struct device *dev)
 {
 	struct spi_device	*spi = to_spi_device(dev);
@@ -202,11 +197,16 @@ EXPORT_SYMBOL_GPL(spi_register_driver);
 
 struct boardinfo {
 	struct list_head	list;
-	unsigned		n_board_info;
-	struct spi_board_info	board_info[0];
+	struct spi_board_info	board_info;
 };
 
 static LIST_HEAD(board_list);
+static LIST_HEAD(spi_master_list);
+
+/*
+ * Used to protect add/del opertion for board_info list and
+ * spi_master list, and their matching process
+ */
 static DEFINE_MUTEX(board_lock);
 
 /**
@@ -300,16 +300,16 @@ int spi_add_device(struct spi_device *spi)
 	 */
 	status = spi_setup(spi);
 	if (status < 0) {
-		dev_err(dev, "can't %s %s, status %d\n",
-				"setup", dev_name(&spi->dev), status);
+		dev_err(dev, "can't setup %s, status %d\n",
+				dev_name(&spi->dev), status);
 		goto done;
 	}
 
 	/* Device may be bound to an active driver when this returns */
 	status = device_add(&spi->dev);
 	if (status < 0)
-		dev_err(dev, "can't %s %s, status %d\n",
-				"add", dev_name(&spi->dev), status);
+		dev_err(dev, "can't add %s, status %d\n",
+				dev_name(&spi->dev), status);
 	else
 		dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
 
@@ -371,6 +371,20 @@ struct spi_device *spi_new_device(struct spi_master *master,
 }
 EXPORT_SYMBOL_GPL(spi_new_device);
 
+static void spi_match_master_to_boardinfo(struct spi_master *master,
+				struct spi_board_info *bi)
+{
+	struct spi_device *dev;
+
+	if (master->bus_num != bi->bus_num)
+		return;
+
+	dev = spi_new_device(master, bi);
+	if (!dev)
+		dev_err(master->dev.parent, "can't create new device for %s\n",
+			bi->modalias);
+}
+
 /**
  * spi_register_board_info - register SPI devices for a given board
  * @info: array of chip descriptors
@@ -393,43 +407,25 @@ EXPORT_SYMBOL_GPL(spi_new_device);
 int __init
 spi_register_board_info(struct spi_board_info const *info, unsigned n)
 {
-	struct boardinfo	*bi;
+	struct boardinfo *bi;
+	int i;
 
-	bi = kmalloc(sizeof(*bi) + n * sizeof *info, GFP_KERNEL);
+	bi = kzalloc(n * sizeof(*bi), GFP_KERNEL);
 	if (!bi)
 		return -ENOMEM;
-	bi->n_board_info = n;
-	memcpy(bi->board_info, info, n * sizeof *info);
 
-	mutex_lock(&board_lock);
-	list_add_tail(&bi->list, &board_list);
-	mutex_unlock(&board_lock);
-	return 0;
-}
+	for (i = 0; i < n; i++, bi++, info++) {
+		struct spi_master *master;
 
-/* FIXME someone should add support for a __setup("spi", ...) that
- * creates board info from kernel command lines
- */
-
-static void scan_boardinfo(struct spi_master *master)
-{
-	struct boardinfo	*bi;
-
-	mutex_lock(&board_lock);
-	list_for_each_entry(bi, &board_list, list) {
-		struct spi_board_info	*chip = bi->board_info;
-		unsigned		n;
-
-		for (n = bi->n_board_info; n > 0; n--, chip++) {
-			if (chip->bus_num != master->bus_num)
-				continue;
-			/* NOTE: this relies on spi_new_device to
-			 * issue diagnostics when given bogus inputs
-			 */
-			(void) spi_new_device(master, chip);
-		}
+		memcpy(&bi->board_info, info, sizeof(*info));
+		mutex_lock(&board_lock);
+		list_add_tail(&bi->list, &board_list);
+		list_for_each_entry(master, &spi_master_list, list)
+			spi_match_master_to_boardinfo(master, &bi->board_info);
+		mutex_unlock(&board_lock);
 	}
-	mutex_unlock(&board_lock);
+
+	return 0;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -512,6 +508,7 @@ int spi_register_master(struct spi_master *master)
 {
 	static atomic_t		dyn_bus_id = ATOMIC_INIT((1<<15) - 1);
 	struct device		*dev = master->dev.parent;
+	struct boardinfo	*bi;
 	int			status = -ENODEV;
 	int			dynamic = 0;
 
@@ -547,8 +544,12 @@ int spi_register_master(struct spi_master *master)
 	dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev),
 			dynamic ? " (dynamic)" : "");
 
-	/* populate children from any spi device tables */
-	scan_boardinfo(master);
+	mutex_lock(&board_lock);
+	list_add_tail(&master->list, &spi_master_list);
+	list_for_each_entry(bi, &board_list, list)
+		spi_match_master_to_boardinfo(master, &bi->board_info);
+	mutex_unlock(&board_lock);
+
 	status = 0;
 
 	/* Register devices from the device tree */
@@ -579,7 +580,12 @@ void spi_unregister_master(struct spi_master *master)
 {
 	int dummy;
 
-	dummy = device_for_each_child(&master->dev, NULL, __unregister);
+	mutex_lock(&board_lock);
+	list_del(&master->list);
+	mutex_unlock(&board_lock);
+
+	dummy = device_for_each_child(master->dev.parent, &master->dev,
+					__unregister);
 	device_unregister(&master->dev);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_master);
@@ -652,7 +658,7 @@ int spi_setup(struct spi_device *spi)
 	 */
 	bad_bits = spi->mode & ~spi->master->mode_bits;
 	if (bad_bits) {
-		dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
+		dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
 			bad_bits);
 		return -EINVAL;
 	}

drivers/spi/spi_bfin5xx.c

@@ -504,6 +504,15 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id)
 		"in dma_irq_handler dmastat:0x%x spistat:0x%x\n",
 		dmastat, spistat);
 
+	if (drv_data->rx != NULL) {
+		u16 cr = read_CTRL(drv_data);
+		/* discard old RX data and clear RXS */
+		bfin_spi_dummy_read(drv_data);
+		write_CTRL(drv_data, cr & ~BIT_CTL_ENABLE); /* Disable SPI */
+		write_CTRL(drv_data, cr & ~BIT_CTL_TIMOD); /* Restore State */
+		write_STAT(drv_data, BIT_STAT_CLR); /* Clear Status */
+	}
+
 	clear_dma_irqstat(drv_data->dma_channel);
 
 	/*
@@ -1099,12 +1108,15 @@ static int bfin_spi_setup(struct spi_device *spi)
 	}
 
 	if (chip->chip_select_num >= MAX_CTRL_CS) {
-		ret = gpio_request(chip->cs_gpio, spi->modalias);
-		if (ret) {
-			dev_err(&spi->dev, "gpio_request() error\n");
-			goto pin_error;
+		/* Only request on first setup */
+		if (spi_get_ctldata(spi) == NULL) {
+			ret = gpio_request(chip->cs_gpio, spi->modalias);
+			if (ret) {
+				dev_err(&spi->dev, "gpio_request() error\n");
+				goto pin_error;
+			}
+			gpio_direction_output(chip->cs_gpio, 1);
 		}
-		gpio_direction_output(chip->cs_gpio, 1);
 	}
 
 	dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n",