Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Improve thermal cpu_cooling interaction with cpufreq core.

   The cpu_cooling driver is designed to use CPU frequency scaling to
   avoid high thermal states for a platform. But it wasn't glued really
   well with cpufreq core.

   For example clipped-cpus is copied from the policy structure and its
   much better to use the policy->cpus (or related_cpus) fields directly
   as they may have got updated. Not that things were broken before this
   series, but they can be optimized a bit more.

   This series tries to improve interactions between cpufreq core and
   cpu_cooling driver and does some fixes/cleanups to the cpu_cooling
   driver. (Viresh Kumar)

 - A couple of fixes and cleanups in thermal core and imx, hisilicon,
   bcm_2835, int340x thermal drivers. (Arvind Yadav, Dan Carpenter,
   Sumeet Pawnikar, Srinivas Pandruvada, Willy WOLFF)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits)
  thermal: bcm2835: fix an error code in probe()
  thermal: hisilicon: Handle return value of clk_prepare_enable
  thermal: imx: Handle return value of clk_prepare_enable
  thermal: int340x: check for sensor when PTYP is missing
  Thermal/int340x: Fix few typos and kernel-doc style
  thermal: fix source code documentation for parameters
  thermal: cpu_cooling: Replace kmalloc with kmalloc_array
  thermal: cpu_cooling: Rearrange struct cpufreq_cooling_device
  thermal: cpu_cooling: 'freq' can't be zero in cpufreq_state2power()
  thermal: cpu_cooling: don't store cpu_dev in cpufreq_cdev
  thermal: cpu_cooling: get_level() can't fail
  thermal: cpu_cooling: create structure for idle time stats
  thermal: cpu_cooling: merge frequency and power tables
  thermal: cpu_cooling: get rid of 'allowed_cpus'
  thermal: cpu_cooling: OPPs are registered for all CPUs
  thermal: cpu_cooling: store cpufreq policy
  cpufreq: create cpufreq_table_count_valid_entries()
  thermal: cpu_cooling: use cpufreq_policy to register cooling device
  thermal: cpu_cooling: get rid of a variable in cpufreq_set_cur_state()
  thermal: cpu_cooling: remove cpufreq_cooling_get_level()
  ...

drivers/thermal/broadcom/bcm2835_thermal.c

@@ -245,7 +245,6 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		 */
 		err = tz->ops->get_trip_temp(tz, 0, &trip_temp);
 		if (err < 0) {
-			err = PTR_ERR(tz);
 			dev_err(&pdev->dev,
 				"Not able to read trip_temp: %d\n",
 				err);

drivers/thermal/fair_share.c

@@ -71,6 +71,7 @@ static long get_target_state(struct thermal_zone_device *tz,
 /**
  * fair_share_throttle - throttles devices associated with the given zone
  * @tz - thermal_zone_device
+ * @trip - trip point index
  *
  * Throttling Logic: This uses three parameters to calculate the new
  * throttle state of the cooling devices associated with the given zone.

drivers/thermal/hisi_thermal.c

@@ -397,8 +397,11 @@ static int hisi_thermal_suspend(struct device *dev)
 static int hisi_thermal_resume(struct device *dev)
 {
 	struct hisi_thermal_data *data = dev_get_drvdata(dev);
+	int ret;
 
-	clk_prepare_enable(data->clk);
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
 
 	data->irq_enabled = true;
 	hisi_thermal_enable_bind_irq_sensor(data);

drivers/thermal/imx_thermal.c

@@ -8,6 +8,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 #include <linux/cpu_cooling.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -88,6 +89,7 @@ static struct thermal_soc_data thermal_imx6sx_data = {
 };
 
 struct imx_thermal_data {
+	struct cpufreq_policy *policy;
 	struct thermal_zone_device *tz;
 	struct thermal_cooling_device *cdev;
 	enum thermal_device_mode mode;
@@ -525,13 +527,18 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
 	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
 
-	data->cdev = cpufreq_cooling_register(cpu_present_mask);
+	data->policy = cpufreq_cpu_get(0);
+	if (!data->policy) {
+		pr_debug("%s: CPUFreq policy not found\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	data->cdev = cpufreq_cooling_register(data->policy);
 	if (IS_ERR(data->cdev)) {
 		ret = PTR_ERR(data->cdev);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"failed to register cpufreq cooling device: %d\n",
-				ret);
+		dev_err(&pdev->dev,
+			"failed to register cpufreq cooling device: %d\n", ret);
+		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
 
@@ -542,6 +549,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"failed to get thermal clk: %d\n", ret);
 		cpufreq_cooling_unregister(data->cdev);
+		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
 
@@ -556,6 +564,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
 		cpufreq_cooling_unregister(data->cdev);
+		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
 
@@ -571,6 +580,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
 			"failed to register thermal zone device %d\n", ret);
 		clk_disable_unprepare(data->thermal_clk);
 		cpufreq_cooling_unregister(data->cdev);
+		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
 
@@ -599,6 +609,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		clk_disable_unprepare(data->thermal_clk);
 		thermal_zone_device_unregister(data->tz);
 		cpufreq_cooling_unregister(data->cdev);
+		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
 
@@ -620,6 +631,7 @@ static int imx_thermal_remove(struct platform_device *pdev)
 
 	thermal_zone_device_unregister(data->tz);
 	cpufreq_cooling_unregister(data->cdev);
+	cpufreq_cpu_put(data->policy);
 
 	return 0;
 }
@@ -648,8 +660,11 @@ static int imx_thermal_resume(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
 	struct regmap *map = data->tempmon;
+	int ret;
 
-	clk_prepare_enable(data->thermal_clk);
+	ret = clk_prepare_enable(data->thermal_clk);
+	if (ret)
+		return ret;
 	/* Enabled thermal sensor after resume */
 	regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
 	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);

drivers/thermal/int340x_thermal/acpi_thermal_rel.c

@@ -62,8 +62,8 @@ static int acpi_thermal_rel_release(struct inode *inode, struct file *file)
  * acpi_parse_trt - Thermal Relationship Table _TRT for passive cooling
  *
  * @handle: ACPI handle of the device contains _TRT
- * @art_count: the number of valid entries resulted from parsing _TRT
- * @artp: pointer to pointer of array of art entries in parsing result
+ * @trt_count: the number of valid entries resulted from parsing _TRT
+ * @trtp: pointer to pointer of array of _TRT entries in parsing result
  * @create_dev: whether to create platform devices for target and source
  *
  */
@@ -208,7 +208,7 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp,
 		if (art->target) {
 			result = acpi_bus_get_device(art->target, &adev);
 			if (result)
-				pr_warn("Failed to get source ACPI device\n");
+				pr_warn("Failed to get target ACPI device\n");
 		}
 	}
 

drivers/thermal/int340x_thermal/int3403_thermal.c

@@ -238,8 +238,16 @@ static int int3403_add(struct platform_device *pdev)
 	status = acpi_evaluate_integer(priv->adev->handle, "PTYP",
 				       NULL, &priv->type);
 	if (ACPI_FAILURE(status)) {
-		result = -EINVAL;
-		goto err;
+		unsigned long long tmp;
+
+		status = acpi_evaluate_integer(priv->adev->handle, "_TMP",
+					       NULL, &tmp);
+		if (ACPI_FAILURE(status)) {
+			result = -EINVAL;
+			goto err;
+		} else {
+			priv->type = INT3403_TYPE_SENSOR;
+		}
 	}
 
 	platform_set_drvdata(pdev, priv);

drivers/thermal/step_wise.c

@@ -186,8 +186,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
 /**
  * step_wise_throttle - throttles devices associated with the given zone
  * @tz - thermal_zone_device
- * @trip - the trip point
- * @trip_type - type of the trip point
+ * @trip - trip point index
  *
  * Throttling Logic: This uses the trend of the thermal zone to throttle.
  * If the thermal zone is 'heating up' this throttles all the cooling

drivers/thermal/ti-soc-thermal/ti-thermal-common.c

@@ -28,6 +28,7 @@
 #include <linux/kernel.h>
 #include <linux/workqueue.h>
 #include <linux/thermal.h>
+#include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/cpu_cooling.h>
 #include <linux/of.h>
@@ -37,6 +38,7 @@
 
 /* common data structures */
 struct ti_thermal_data {
+	struct cpufreq_policy *policy;
 	struct thermal_zone_device *ti_thermal;
 	struct thermal_zone_device *pcb_tz;
 	struct thermal_cooling_device *cool_dev;
@@ -247,15 +249,19 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
 	if (!data)
 		return -EINVAL;
 
+	data->policy = cpufreq_cpu_get(0);
+	if (!data->policy) {
+		pr_debug("%s: CPUFreq policy not found\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
 	/* Register cooling device */
-	data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
+	data->cool_dev = cpufreq_cooling_register(data->policy);
 	if (IS_ERR(data->cool_dev)) {
 		int ret = PTR_ERR(data->cool_dev);
-
-		if (ret != -EPROBE_DEFER)
-			dev_err(bgp->dev,
-				"Failed to register cpu cooling device %d\n",
-				ret);
+		dev_err(bgp->dev, "Failed to register cpu cooling device %d\n",
+			ret);
+		cpufreq_cpu_put(data->policy);
 
 		return ret;
 	}
@@ -270,8 +276,10 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
-	if (data)
+	if (data) {
 		cpufreq_cooling_unregister(data->cool_dev);
+		cpufreq_cpu_put(data->policy);
+	}
 
 	return 0;
 }

drivers/thermal/user_space.c

@@ -24,12 +24,13 @@
 
 #include <linux/thermal.h>
 #include <linux/slab.h>
+
 #include "thermal_core.h"
 
 /**
  * notify_user_space - Notifies user space about thermal events
  * @tz - thermal_zone_device
- * @trip - Trip point index
+ * @trip - trip point index
  *
  * This function notifies the user space through UEvents.
  */