wisl: miami: bringup nfc pn557

Config the PN557 device tree, according to
RF HW request.

Change-Id: Ie05f9eb57c93c51beb69170b2b781232139cc61b
Signed-off-by: duqiu2 <duqiu2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2230640
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Bin Liu <liubin7@motorola.com>
Reviewed-by: Xu Du <duxu1@motorola.com>
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
This commit is contained in:
duqiu2 2022-03-31 15:11:48 +08:00 • committed by panyq6
commit 4d5a46ff21

View file

@ -220,21 +220,27 @@
status = "ok"
#address-cells = <1>;
#size-cells = <0>;
sec-nfc@27 {
compatible = "sec-nfc";
reg = <0x27>;
mmi,status = "/chosen", "mmi,nfc", "samsung"
sec-nfc,ven-gpio = <&tlmm 48 0x00>;
sec-nfc,firm-gpio = <&tlmm 8 0x00>;
sec-nfc,irq-gpio = <&tlmm 9 0x00>;
sec-nfc,clk_req-gpio = <&tlmm 7 0x00>;
st21nfc@8 {
status = "disabled";
};
nq@28 {
compatible = "qcom,sn-nci";
mmi,status = "/chosen", "mmi,nfc", "nxp"
reg = <0x28>;
qcom,sn-irq = <&tlmm 9 0x00>;
qcom,sn-ven = <&tlmm 48 0x00>;
qcom,sn-firm = <&tlmm 8 0x00>;
qcom,sn-clkreq = <&tlmm 7 0x00>;
interrupt-parent = <&tlmm>;
interrupts = <9 0>;
interrupt-names = "nfc_irq";
pinctrl-names = "nfc_active", "nfc_suspend";
pinctrl-0 = <&nfc_int_active &nfc_enable_active &nfc_clk_req_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend &nfc_clk_req_suspend>;
};
pinctrl-0 = <&nfc_int_active &nfc_enable_active
&nfc_clk_req_active>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
&nfc_clk_req_suspend>;
};
};
&qupv3_se2_i2c {