From 53ee2c650cbea49190cd90f46f53f93dfcd2f4d0 Mon Sep 17 00:00:00 2001
From: liubaolin <liubaolin@wingtech.com>
Date: Fri, 10 Dec 2021 17:56:17 +0800
Subject: [PATCH] rhodec: modify sgm7220 en pin config in evb dts

For rhodec phone,evb the sgm7220 en pin is control by gpio58,
after evb,the sgm7220 en pin is connected to ground,so no need
to config gpio58 to pull down the sgm7220 en pin.so modify the
sgm7220 en pin config in evb dts

Change-Id: Ie351d675272d6cc7c2fe1d6a3719deab39f1b9bf
Signed-off-by: liubaolin <liubaolin@wingtech.com>
Reviewed-on: https://gerrit.mot.com/2141090
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: panyq6 <panyq6@motorola.com>
---
 qcom/discrete_charging_holi.dtsi | 17 -----------------
 qcom/holi-rhodec-evb-overlay.dts | 21 +++++++++++++++++++++
 2 files changed, 21 insertions(+), 17 deletions(-)

diff --git a/qcom/discrete_charging_holi.dtsi b/qcom/discrete_charging_holi.dtsi
index 4c74f78af041..0b826b59d70e 100644
--- a/qcom/discrete_charging_holi.dtsi
+++ b/qcom/discrete_charging_holi.dtsi
@@ -127,26 +127,9 @@
 		};
 };
 
-&sgm7220 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sgm7220_int_n &sgm7220_en_n>;
-};
 
 &tlmm {
 
-	sgm7220_en_n: sgm7220_en_n {
-		mux {
-			pins = "gpio58";
-			function = "gpio";
-		};
-		config {
-			pins = "gpio58";
-			drive-strength = <2>; /* 2 MA */
-			bias-pull-down;
-			input-enable;
-		};
-	};
-
 	chg_irq_default: chg_irq_default {
 		/* IRQ */
 		mux {
diff --git a/qcom/holi-rhodec-evb-overlay.dts b/qcom/holi-rhodec-evb-overlay.dts
index cf0cc46f16ae..ea9ee8b86c98 100644
--- a/qcom/holi-rhodec-evb-overlay.dts
+++ b/qcom/holi-rhodec-evb-overlay.dts
@@ -22,3 +22,24 @@
 	qcom,board-id = <0x47 0x9000>;
 };
 
+
+&sgm7220 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sgm7220_int_n &sgm7220_en_n>;
+};
+
+&tlmm {
+
+	sgm7220_en_n: sgm7220_en_n {
+		mux {
+			pins = "gpio58";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio58";
+			drive-strength = <2>; /* 2 MA */
+                        bias-pull-down;
+                        input-enable;
+		};
+	};
+};