A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-30 11:41:38 -04:00
Code Issues Projects Releases Packages Wiki Activity

[MIPS] Alchemy: nuke usbdev; it's useless as is ...

Browse source 
Signed-off-by: Ralf Baechle <[email protected]>
This commit is contained in:
Ralf Baechle 2006-10-09 16:34:41 +01:00
commit 5536b23514
11 changed files with 9 additions and 1662 deletions
Download patch file Download diff file Expand all files Collapse all files

5
arch/mips/Kconfig
View file

@ -1010,11 +1010,6 @@ endchoice
config ARC32
bool
config AU1X00_USB_DEVICE
bool
depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
default n
config BOOT_ELF32
bool

1
arch/mips/au1000/common/Makefile
View file

@ -10,6 +10,5 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
sleeper.o cputable.o dma.o dbdma.o gpio.o
obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o
obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_PCI) += pci.o

1552
arch/mips/au1000/common/usbdev.c
View file

File diff suppressed because it is too large Load diff

5
arch/mips/au1000/db1x00/board_setup.c
View file

@ -58,11 +58,6 @@ void __init board_setup(void)
pin_func = 0;
/* not valid for 1550 */
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
au_writel(pin_func, SYS_PINFUNC);
#endif
#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
/* set IRFIRSEL instead of GPIO15 */

8
arch/mips/au1000/mtx-1/board_setup.c
View file

@ -51,15 +51,11 @@ void board_reset (void)
void __init board_setup(void)
{
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
au_writel(au_readl(SYS_PINFUNC) & (u32)(~0x8000), SYS_PINFUNC);
#endif
#ifdef CONFIG_USB_OHCI
// enable USB power switch
au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
au_writel( 0x100000, GPIO2_OUTPUT );
#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#endif // defined (CONFIG_USB_OHCI)
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)

10
arch/mips/au1000/pb1000/board_setup.c
View file

@ -54,7 +54,7 @@ void __init board_setup(void)
au_writel(0, SYS_PINSTATERD);
udelay(100);
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_USB_OHCI
/* zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
@ -104,23 +104,19 @@ void __init board_setup(void)
*/
#ifdef CONFIG_USB_OHCI
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
#ifdef CONFIG_AU1X00_USB_DEVICE
sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
#endif
au_writel(sys_clksrc, SYS_CLKSRC);
// configure pins GPIO[14:9] as GPIO
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
#ifndef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB host
pin_func |= 0x8000;
#endif
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x2800, SYS_TRIOUTCLR);
au_writel(0x0030, SYS_OUTPUTCLR);
#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#endif // defined (CONFIG_USB_OHCI)
// make gpio 15 an input (for interrupt line)
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);

6
arch/mips/au1000/pb1100/board_setup.c
View file

@ -55,7 +55,7 @@ void __init board_setup(void)
au_writel(0, SYS_PININPUTEN);
udelay(100);
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_USB_OHCI
// configure pins GPIO[14:9] as GPIO
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
@ -92,12 +92,10 @@ void __init board_setup(void)
// get USB Functionality pin state (device vs host drive pins)
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
#ifndef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB host
pin_func |= 0x8000;
#endif
au_writel(pin_func, SYS_PINFUNC);
#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#endif // defined (CONFIG_USB_OHCI)
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);

9
arch/mips/au1000/pb1500/board_setup.c
View file

@ -56,7 +56,7 @@ void __init board_setup(void)
au_writel(0, SYS_PINSTATERD);
udelay(100);
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_USB_OHCI
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
@ -87,20 +87,15 @@ void __init board_setup(void)
*/
#ifdef CONFIG_USB_OHCI
sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
#endif
#ifdef CONFIG_AU1X00_USB_DEVICE
sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
#endif
au_writel(sys_clksrc, SYS_CLKSRC);
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
#ifndef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB host
pin_func |= 0x8000;
#endif
au_writel(pin_func, SYS_PINFUNC);
#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#endif // defined (CONFIG_USB_OHCI)

1
arch/mips/configs/pb1100_defconfig
View file

@ -76,7 +76,6 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SOC_AU1100=y
CONFIG_SOC_AU1X00=y
CONFIG_SWAP_IO_SPACE=y
# CONFIG_AU1X00_USB_DEVICE is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
#

1
arch/mips/configs/pb1500_defconfig
View file

@ -75,7 +75,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SOC_AU1500=y
CONFIG_SOC_AU1X00=y
# CONFIG_AU1X00_USB_DEVICE is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
#