Merge branch 'merge'

drivers/serial/8250.c

@@ -299,6 +299,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
 
 static unsigned int serial_in(struct uart_8250_port *up, int offset)
 {
+	unsigned int tmp;
 	offset = map_8250_in_reg(up, offset) << up->port.regshift;
 
 	switch (up->port.iotype) {
@@ -317,6 +318,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset)
 		return __raw_readl(up->port.membase + offset);
 #endif
 
+	case UPIO_TSI:
+		if (offset == UART_IIR) {
+			tmp = readl((u32 *)(up->port.membase + UART_RX));
+			return (cpu_to_le32(tmp) >> 8) & 0xff;
+		} else
+			return readb(up->port.membase + offset);
+
 	default:
 		return inb(up->port.iobase + offset);
 	}
@@ -346,6 +354,10 @@ serial_out(struct uart_8250_port *up, int offset, int value)
 		__raw_writel(value, up->port.membase + offset);
 		break;
 #endif
+	case UPIO_TSI:
+		if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+			writeb(value, up->port.membase + offset);
+		break;
 
 	default:
 		outb(value, up->port.iobase + offset);
@@ -2240,10 +2252,14 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 
 	touch_nmi_watchdog();
 
-	if (oops_in_progress) {
-		locked = spin_trylock_irqsave(&up->port.lock, flags);
+	local_irq_save(flags);
+	if (up->port.sysrq) {
+		/* serial8250_handle_port() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&up->port.lock);
 	} else
-		spin_lock_irqsave(&up->port.lock, flags);
+		spin_lock(&up->port.lock);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -2265,7 +2281,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	serial_out(up, UART_IER, ier);
 
 	if (locked)
-		spin_unlock_irqrestore(&up->port.lock, flags);
+		spin_unlock(&up->port.lock);
+	local_irq_restore(flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)

drivers/serial/dz.c

@@ -673,7 +673,7 @@ static void dz_reset(struct dz_port *dport)
 }
 
 #ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_putchar(struct uart_port *port, int ch)
+static void dz_console_putchar(struct uart_port *uport, int ch)
 {
 	struct dz_port *dport = (struct dz_port *)uport;
 	unsigned long flags;

drivers/serial/ip22zilog.c

@@ -1143,9 +1143,8 @@ static void __init ip22zilog_prepare(void)
 		up[(chip * 2) + 1].port.fifosize = 1;
 		up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
 		up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
-		up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
 		up[(chip * 2) + 1].port.line = (chip * 2) + 1;
-		up[(chip * 2) + 1].flags = 0;
+		up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
 	}
 }
 

drivers/serial/serial_core.c

@@ -2036,6 +2036,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 	case UPIO_MEM:
 	case UPIO_MEM32:
 	case UPIO_AU:
+	case UPIO_TSI:
 		snprintf(address, sizeof(address),
 			 "MMIO 0x%lx", port->mapbase);
 		break;

drivers/serial/sunsab.c

@@ -1047,12 +1047,13 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id *
 	up = &sunsab_ports[inst * 2];
 
 	err = sunsab_init_one(&up[0], op,
-			      sizeof(union sab82532_async_regs),
+			      0,
 			      (inst * 2) + 0);
 	if (err)
 		return err;
 
-	err = sunsab_init_one(&up[0], op, 0,
+	err = sunsab_init_one(&up[1], op,
+			      sizeof(union sab82532_async_regs),
 			      (inst * 2) + 1);
 	if (err) {
 		of_iounmap(up[0].port.membase,
@@ -1117,7 +1118,7 @@ static int __init sunsab_init(void)
 	int err;
 
 	num_channels = 0;
-	for_each_node_by_name(dp, "su")
+	for_each_node_by_name(dp, "se")
 		num_channels += 2;
 	for_each_node_by_name(dp, "serial") {
 		if (of_device_is_compatible(dp, "sab82532"))

drivers/serial/sunsu.c

@@ -1200,6 +1200,11 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up)
 	if (up->port.type == PORT_UNKNOWN)
 		return -ENODEV;
 
+	printk("%s: %s port at %lx, irq %u\n",
+	       to_of_device(up->port.dev)->node->full_name,
+	       (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
+	       up->port.mapbase, up->port.irq);
+
 #ifdef CONFIG_SERIO
 	serio = &up->serio;
 	serio->port_data = up;
@@ -1406,25 +1411,35 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	struct device_node *dp = op->node;
 	struct uart_sunsu_port *up;
 	struct resource *rp;
+	enum su_type type;
 	int err;
 
-	if (inst >= UART_NR)
-		return -EINVAL;
+	type = su_get_type(dp);
+	if (type == SU_PORT_PORT) {
+		if (inst >= UART_NR)
+			return -EINVAL;
+		up = &sunsu_ports[inst];
+	} else {
+		up = kzalloc(sizeof(*up), GFP_KERNEL);
+		if (!up)
+			return -ENOMEM;
+	}
 
-	up = &sunsu_ports[inst];
 	up->port.line = inst;
 
 	spin_lock_init(&up->port.lock);
 
-	up->su_type = su_get_type(dp);
+	up->su_type = type;
 
 	rp = &op->resource[0];
-	up->port.mapbase = op->resource[0].start;
-
+	up->port.mapbase = rp->start;
 	up->reg_size = (rp->end - rp->start) + 1;
 	up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
-	if (!up->port.membase)
+	if (!up->port.membase) {
+		if (type != SU_PORT_PORT)
+			kfree(up);
 		return -ENOMEM;
+	}
 
 	up->port.irq = op->irqs[0];
 
@@ -1436,8 +1451,11 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	err = 0;
 	if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
 		err = sunsu_kbd_ms_init(up);
-		if (err)
+		if (err) {
+			kfree(up);
 			goto out_unmap;
+		}
+		dev_set_drvdata(&op->dev, up);
 
 		return 0;
 	}
@@ -1476,8 +1494,12 @@ static int __devexit su_remove(struct of_device *dev)
 #ifdef CONFIG_SERIO
 		serio_unregister_port(&up->serio);
 #endif
-	} else if (up->port.type != PORT_UNKNOWN)
+		kfree(up);
+	} else if (up->port.type != PORT_UNKNOWN) {
 		uart_remove_one_port(&sunsu_reg, &up->port);
+	}
+
+	dev_set_drvdata(&dev->dev, NULL);
 
 	return 0;
 }

drivers/serial/sunzilog.c

@@ -68,9 +68,6 @@ static int num_sunzilog;
 #define NUM_SUNZILOG	num_sunzilog
 #define NUM_CHANNELS	(NUM_SUNZILOG * 2)
 
-#define KEYBOARD_LINE 0x2
-#define MOUSE_LINE    0x3
-
 #define ZS_CLOCK		4915200 /* Zilog input clock rate. */
 #define ZS_CLOCK_DIVISOR	16      /* Divisor this driver uses. */
 
@@ -1225,12 +1222,10 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
 {
 	int baud, brg;
 
-	if (channel == KEYBOARD_LINE) {
-		up->flags |= SUNZILOG_FLAG_CONS_KEYB;
+	if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
 		up->cflag = B1200 | CS8 | CLOCAL | CREAD;
 		baud = 1200;
 	} else {
-		up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
 		up->cflag = B4800 | CS8 | CLOCAL | CREAD;
 		baud = 4800;
 	}
@@ -1243,14 +1238,14 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
 }
 
 #ifdef CONFIG_SERIO
-static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
+static void __init sunzilog_register_serio(struct uart_sunzilog_port *up)
 {
 	struct serio *serio = &up->serio;
 
 	serio->port_data = up;
 
 	serio->id.type = SERIO_RS232;
-	if (channel == KEYBOARD_LINE) {
+	if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
 		serio->id.proto = SERIO_SUNKBD;
 		strlcpy(serio->name, "zskbd", sizeof(serio->name));
 	} else {
@@ -1259,7 +1254,8 @@ static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int ch
 		strlcpy(serio->name, "zsms", sizeof(serio->name));
 	}
 	strlcpy(serio->phys,
-		(channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+		((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
+		 "zs/serio0" : "zs/serio1"),
 		sizeof(serio->phys));
 
 	serio->write = sunzilog_serio_write;
@@ -1286,8 +1282,8 @@ static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
 		(void) read_zsreg(channel, R0);
 	}
 
-	if (up->port.line == KEYBOARD_LINE ||
-	    up->port.line == MOUSE_LINE) {
+	if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+			 SUNZILOG_FLAG_CONS_MOUSE)) {
 		sunzilog_init_kbdms(up, up->port.line);
 		up->curregs[R9] |= (NV | MIE);
 		write_zsreg(channel, R9, up->curregs[R9]);
@@ -1313,37 +1309,26 @@ static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
 #ifdef CONFIG_SERIO
-	if (up->port.line == KEYBOARD_LINE || up->port.line == MOUSE_LINE)
-		sunzilog_register_serio(up, up->port.line);
+	if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+			 SUNZILOG_FLAG_CONS_MOUSE))
+		sunzilog_register_serio(up);
 #endif
 }
 
-static int __devinit zs_get_instance(struct device_node *dp)
-{
-	int ret;
-
-	ret = of_getintprop_default(dp, "slave", -1);
-	if (ret != -1)
-		return ret;
-
-	if (of_find_property(dp, "keyboard", NULL))
-		ret = 1;
-	else
-		ret = 0;
-
-	return ret;
-}
-
 static int zilog_irq = -1;
 
-static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *match)
+static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct of_device *op = to_of_device(&dev->dev);
+	static int inst;
 	struct uart_sunzilog_port *up;
 	struct zilog_layout __iomem *rp;
-	int inst = zs_get_instance(dev->node);
+	int keyboard_mouse;
 	int err;
 
+	keyboard_mouse = 0;
+	if (of_find_property(op->node, "keyboard", NULL))
+		keyboard_mouse = 1;
+
 	sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
 					      sizeof(struct zilog_layout),
 					      "zs");
@@ -1352,16 +1337,8 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
 
 	rp = sunzilog_chip_regs[inst];
 
-	if (zilog_irq == -1) {
+	if (zilog_irq == -1)
 		zilog_irq = op->irqs[0];
-		err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
-				  "zs", sunzilog_irq_chain);
-		if (err) {
-			of_iounmap(rp, sizeof(struct zilog_layout));
-
-			return err;
-		}
-	}
 
 	up = &sunzilog_port_table[inst * 2];
 
@@ -1378,7 +1355,7 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
 	up[0].port.line = (inst * 2) + 0;
 	up[0].port.dev = &op->dev;
 	up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
-	if (inst == 1)
+	if (keyboard_mouse)
 		up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
 	sunzilog_init_hw(&up[0]);
 
@@ -1395,11 +1372,11 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
 	up[1].port.line = (inst * 2) + 1;
 	up[1].port.dev = &op->dev;
 	up[1].flags |= 0;
-	if (inst == 1)
+	if (keyboard_mouse)
 		up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
 	sunzilog_init_hw(&up[1]);
 
-	if (inst != 1) {
+	if (!keyboard_mouse) {
 		err = uart_add_one_port(&sunzilog_reg, &up[0].port);
 		if (err) {
 			of_iounmap(rp, sizeof(struct zilog_layout));
@@ -1411,9 +1388,18 @@ static int __devinit zs_probe(struct of_device *dev, const struct of_device_id *
 			of_iounmap(rp, sizeof(struct zilog_layout));
 			return err;
 		}
+	} else {
+		printk(KERN_INFO "%s: Keyboard at MMIO %lx (irq = %d) "
+		       "is a zs\n",
+		       op->dev.bus_id, up[0].port.mapbase, op->irqs[0]);
+		printk(KERN_INFO "%s: Mouse at MMIO %lx (irq = %d) "
+		       "is a zs\n",
+		       op->dev.bus_id, up[1].port.mapbase, op->irqs[0]);
 	}
 
-	dev_set_drvdata(&dev->dev, &up[0]);
+	dev_set_drvdata(&op->dev, &up[0]);
+
+	inst++;
 
 	return 0;
 }
@@ -1462,36 +1448,65 @@ static struct of_platform_driver zs_driver = {
 static int __init sunzilog_init(void)
 {
 	struct device_node *dp;
-	int err;
+	int err, uart_count;
+	int num_keybms;
 
 	NUM_SUNZILOG = 0;
-	for_each_node_by_name(dp, "zs")
+	num_keybms = 0;
+	for_each_node_by_name(dp, "zs") {
 		NUM_SUNZILOG++;
+		if (of_find_property(dp, "keyboard", NULL))
+			num_keybms++;
+	}
 
+	uart_count = 0;
 	if (NUM_SUNZILOG) {
 		int uart_count;
 
 		err = sunzilog_alloc_tables();
 		if (err)
-			return err;
+			goto out;
 
-		/* Subtract 1 for keyboard, 1 for mouse.  */
-		uart_count = (NUM_SUNZILOG * 2) - 2;
+		uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms);
 
 		sunzilog_reg.nr = uart_count;
 		sunzilog_reg.minor = sunserial_current_minor;
 		err = uart_register_driver(&sunzilog_reg);
-		if (err) {
-			sunzilog_free_tables();
-			return err;
-		}
+		if (err)
+			goto out_free_tables;
+
 		sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
 		sunzilog_reg.cons = SUNZILOG_CONSOLE();
 
 		sunserial_current_minor += uart_count;
 	}
 
-	return of_register_driver(&zs_driver, &of_bus_type);
+	err = of_register_driver(&zs_driver, &of_bus_type);
+	if (err)
+		goto out_unregister_uart;
+
+	if (zilog_irq != -1) {
+		err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
+				  "zs", sunzilog_irq_chain);
+		if (err)
+			goto out_unregister_driver;
+	}
+
+out:
+	return err;
+
+out_unregister_driver:
+	of_unregister_driver(&zs_driver);
+
+out_unregister_uart:
+	if (NUM_SUNZILOG) {
+		uart_unregister_driver(&sunzilog_reg);
+		sunzilog_reg.cons = NULL;
+	}
+
+out_free_tables:
+	sunzilog_free_tables();
+	goto out;
 }
 
 static void __exit sunzilog_exit(void)

drivers/serial/vr41xx_siu.c

@@ -38,6 +38,7 @@
 #include <linux/tty_flip.h>
 
 #include <asm/io.h>
+#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/siu.h>
 #include <asm/vr41xx/vr41xx.h>