pwm: Changes for v3.18-rc1

There are no new drivers here, only a couple of fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJURLy0AAoJEN0jrNd/PrOhP8UP/Auwzo3Wd0cFJEnJVdyrj9sN
 l0Wwnib3edKQDNhPmnQE77fXT3oo4XhdNAzoCRfcy+e/yVq6p3og+tz6z87DahCt
 nnfKCTK8MRw1d4tniVHVhi0BDSfbjXdJCiXe/mmqfPTegIxF5ps7JnHbTZuIOx8i
 XRfxBvAqmmXGmNQANfW7/iZdDzSKQ70DjHIBFn/pa1eLQG2lJ54joo/yeA1Kk0Ly
 CSJGF7L7XLV9mWxXA1vZWGgpIV6dduObtOpRlOwPkG7tGmXInbUery0G429ah8ce
 o7LevARZ41yi7fA6nDtNDG8FWq7oavq0jWvRQuq8M5xn+aYGmYZdd/W47Xc0xUnF
 eGAmz0q78poDTZDA1EXoY/6Og+JgI8x+PpDxaRN4FIa6gpkcTQEuafpo9BLfGo4K
 PTDckq3FqOkIcX5jA4X5OP8lgnz08PZDQaE6QomuNpeKJRy/3aEKWRJ+C4XWcF9t
 7bgkBTLEOq51UXUNuPjogGtwmW8Mf6WOfRdvaRLiTH7KJlJjgwxJYrs0o2D1q7bz
 TbZeDRcRhG7ZfR/5nz7qDEA8FjgwOLCMciqBT4wBc47Er7VaURWl5aoSuTxalJ3A
 hqk8jbwKhaAO+L7N6Jzqk1TqxOKC9HbhaJO7to4gir07bEpXOHQu1jFwZEAmRbvH
 x1prpzzghUPmVv0WYh36
 =llZK
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "There are no new drivers here, only a couple of fixes all over the
  place"

* tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Let PWM_CLPS711X depend on HAS_IOMEM
  pwm: atmel: Fix calculation of prescale value
  pwm: Fix uninitialized warnings in pwm_get()
  pwm: rockchip: Allow polarity invert on rk3288
  pwm: imx: Avoid sample FIFO overflow for i.MX PWM version2
  pwm: imx: Cleanup indentation for register definitions
  pwm: imx: Fix the macro MX3_PWMCR_PRESCALER(x) definition
  pwm: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  pwm: lpss: make it buildable only on X86
  pwm: lpss: use c99 initializers in structures
  pwm: lpss: Fix build failure on PowerPC
  pwm: lpss: pci: Move to use pcim_enable_device()
  pwm: lpss: Properly split driver to parts
  pwm: lpss: Add ACPI and PCI IDs for Intel Braswell
  pwm: fsl-ftm: Select REGMAP_MMIO
  pwm: fsl-ftm: Document 'big-endian' property
  pwm: fsl-ftm: Convert to direct regmap API usage
  pwm: fsl-ftm: Clean up the code
This commit is contained in:
Linus Torvalds 2014-10-21 08:17:43 -07:00
commit 5b9c897252
13 changed files with 399 additions and 222 deletions

View file

@ -83,6 +83,7 @@ config PWM_BFIN
config PWM_CLPS711X
tristate "CLPS711X PWM support"
depends on ARCH_CLPS711X || COMPILE_TEST
depends on HAS_IOMEM
help
Generic PWM framework driver for Cirrus Logic CLPS711X.
@ -101,6 +102,7 @@ config PWM_EP93XX
config PWM_FSL_FTM
tristate "Freescale FlexTimer Module (FTM) PWM support"
depends on OF
select REGMAP_MMIO
help
Generic FTM PWM framework driver for Freescale VF610 and
Layerscape LS-1 SoCs.
@ -149,7 +151,7 @@ config PWM_LPC32XX
config PWM_LPSS
tristate "Intel LPSS PWM support"
depends on ACPI
depends on X86
help
Generic PWM framework driver for Intel Low Power Subsystem PWM
controller.
@ -157,6 +159,24 @@ config PWM_LPSS
To compile this driver as a module, choose M here: the module
will be called pwm-lpss.
config PWM_LPSS_PCI
tristate "Intel LPSS PWM PCI driver"
depends on PWM_LPSS && PCI
help
The PCI driver for Intel Low Power Subsystem PWM controller.
To compile this driver as a module, choose M here: the module
will be called pwm-lpss-pci.
config PWM_LPSS_PLATFORM
tristate "Intel LPSS PWM platform driver"
depends on PWM_LPSS && ACPI
help
The platform driver for Intel Low Power Subsystem PWM controller.
To compile this driver as a module, choose M here: the module
will be called pwm-lpss-platform.
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF

View file

@ -13,6 +13,8 @@ obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o

View file

@ -236,7 +236,7 @@ int pwmchip_add(struct pwm_chip *chip)
int ret;
if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
!chip->ops->enable || !chip->ops->disable)
!chip->ops->enable || !chip->ops->disable || !chip->npwm)
return -EINVAL;
mutex_lock(&pwm_lock);
@ -602,12 +602,9 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER);
const char *dev_id = dev ? dev_name(dev) : NULL;
struct pwm_chip *chip = NULL;
unsigned int index = 0;
unsigned int best = 0;
struct pwm_lookup *p;
struct pwm_lookup *p, *chosen = NULL;
unsigned int match;
unsigned int period;
enum pwm_polarity polarity;
/* look up via DT first */
if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
@ -653,10 +650,7 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
}
if (match > best) {
chip = pwmchip_find_by_name(p->provider);
index = p->index;
period = p->period;
polarity = p->polarity;
chosen = p;
if (match != 3)
best = match;
@ -665,17 +659,22 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
}
}
mutex_unlock(&pwm_lookup_lock);
if (!chosen)
goto out;
if (chip)
pwm = pwm_request_from_chip(chip, index, con_id ?: dev_id);
chip = pwmchip_find_by_name(chosen->provider);
if (!chip)
goto out;
pwm = pwm_request_from_chip(chip, chosen->index, con_id ?: dev_id);
if (IS_ERR(pwm))
return pwm;
pwm_set_period(pwm, period);
pwm_set_polarity(pwm, polarity);
goto out;
pwm_set_period(pwm, chosen->period);
pwm_set_polarity(pwm, chosen->polarity);
out:
mutex_unlock(&pwm_lookup_lock);
return pwm;
}
EXPORT_SYMBOL_GPL(pwm_get);

View file

@ -102,7 +102,7 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
unsigned long clk_rate, prd, dty;
unsigned long prd, dty;
unsigned long long div;
unsigned int pres = 0;
u32 val;
@ -113,20 +113,18 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return -EBUSY;
}
clk_rate = clk_get_rate(atmel_pwm->clk);
div = clk_rate;
/* Calculate the period cycles and prescale value */
div = (unsigned long long)clk_get_rate(atmel_pwm->clk) * period_ns;
do_div(div, NSEC_PER_SEC);
/* Calculate the period cycles */
while (div > PWM_MAX_PRD) {
div = clk_rate / (1 << pres);
div = div * period_ns;
/* 1/Hz = 100000000 ns */
do_div(div, 1000000000);
div >>= 1;
pres++;
}
if (pres++ > PRD_MAX_PRES) {
dev_err(chip->dev, "pres exceeds the maximum value\n");
return -EINVAL;
}
if (pres > PRD_MAX_PRES) {
dev_err(chip->dev, "pres exceeds the maximum value\n");
return -EINVAL;
}
/* Calculate the duty cycles */

View file

@ -18,14 +18,14 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#define FTM_SC 0x00
#define FTM_SC_CLK_MASK 0x3
#define FTM_SC_CLK_SHIFT 3
#define FTM_SC_CLK(c) (((c) + 1) << FTM_SC_CLK_SHIFT)
#define FTM_SC_CLK_MASK_SHIFT 3
#define FTM_SC_CLK_MASK (3 << FTM_SC_CLK_MASK_SHIFT)
#define FTM_SC_CLK(c) (((c) + 1) << FTM_SC_CLK_MASK_SHIFT)
#define FTM_SC_PS_MASK 0x7
#define FTM_SC_PS_SHIFT 0
#define FTM_CNT 0x04
#define FTM_MOD 0x08
@ -83,7 +83,7 @@ struct fsl_pwm_chip {
unsigned int cnt_select;
unsigned int clk_ps;
void __iomem *base;
struct regmap *regmap;
int period_ns;
@ -219,10 +219,11 @@ static unsigned long fsl_pwm_calculate_duty(struct fsl_pwm_chip *fpc,
unsigned long period_ns,
unsigned long duty_ns)
{
unsigned long long val, duty;
unsigned long long duty;
u32 val;
val = readl(fpc->base + FTM_MOD);
duty = duty_ns * (val + 1);
regmap_read(fpc->regmap, FTM_MOD, &val);
duty = (unsigned long long)duty_ns * (val + 1);
do_div(duty, period_ns);
return (unsigned long)duty;
@ -232,7 +233,7 @@ static int fsl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
u32 val, period, duty;
u32 period, duty;
mutex_lock(&fpc->lock);
@ -257,11 +258,9 @@ static int fsl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return -EINVAL;
}
val = readl(fpc->base + FTM_SC);
val &= ~(FTM_SC_PS_MASK << FTM_SC_PS_SHIFT);
val |= fpc->clk_ps;
writel(val, fpc->base + FTM_SC);
writel(period - 1, fpc->base + FTM_MOD);
regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_PS_MASK,
fpc->clk_ps);
regmap_write(fpc->regmap, FTM_MOD, period - 1);
fpc->period_ns = period_ns;
}
@ -270,8 +269,9 @@ static int fsl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
duty = fsl_pwm_calculate_duty(fpc, period_ns, duty_ns);
writel(FTM_CSC_MSB | FTM_CSC_ELSB, fpc->base + FTM_CSC(pwm->hwpwm));
writel(duty, fpc->base + FTM_CV(pwm->hwpwm));
regmap_write(fpc->regmap, FTM_CSC(pwm->hwpwm),
FTM_CSC_MSB | FTM_CSC_ELSB);
regmap_write(fpc->regmap, FTM_CV(pwm->hwpwm), duty);
return 0;
}
@ -283,31 +283,28 @@ static int fsl_pwm_set_polarity(struct pwm_chip *chip,
struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
u32 val;
val = readl(fpc->base + FTM_POL);
regmap_read(fpc->regmap, FTM_POL, &val);
if (polarity == PWM_POLARITY_INVERSED)
val |= BIT(pwm->hwpwm);
else
val &= ~BIT(pwm->hwpwm);
writel(val, fpc->base + FTM_POL);
regmap_write(fpc->regmap, FTM_POL, val);
return 0;
}
static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc)
{
u32 val;
int ret;
if (fpc->use_count != 0)
return 0;
/* select counter clock source */
val = readl(fpc->base + FTM_SC);
val &= ~(FTM_SC_CLK_MASK << FTM_SC_CLK_SHIFT);
val |= FTM_SC_CLK(fpc->cnt_select);
writel(val, fpc->base + FTM_SC);
regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK,
FTM_SC_CLK(fpc->cnt_select));
ret = clk_prepare_enable(fpc->clk[fpc->cnt_select]);
if (ret)
@ -327,13 +324,10 @@ static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc)
static int fsl_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
u32 val;
int ret;
mutex_lock(&fpc->lock);
val = readl(fpc->base + FTM_OUTMASK);
val &= ~BIT(pwm->hwpwm);
writel(val, fpc->base + FTM_OUTMASK);
regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm), 0);
ret = fsl_counter_clock_enable(fpc);
mutex_unlock(&fpc->lock);
@ -343,8 +337,6 @@ static int fsl_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
static void fsl_counter_clock_disable(struct fsl_pwm_chip *fpc)
{
u32 val;
/*
* already disabled, do nothing
*/
@ -356,9 +348,7 @@ static void fsl_counter_clock_disable(struct fsl_pwm_chip *fpc)
return;
/* no users left, disable PWM counter clock */
val = readl(fpc->base + FTM_SC);
val &= ~(FTM_SC_CLK_MASK << FTM_SC_CLK_SHIFT);
writel(val, fpc->base + FTM_SC);
regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK, 0);
clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]);
clk_disable_unprepare(fpc->clk[fpc->cnt_select]);
@ -370,14 +360,12 @@ static void fsl_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
u32 val;
mutex_lock(&fpc->lock);
val = readl(fpc->base + FTM_OUTMASK);
val |= BIT(pwm->hwpwm);
writel(val, fpc->base + FTM_OUTMASK);
regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm),
BIT(pwm->hwpwm));
fsl_counter_clock_disable(fpc);
val = readl(fpc->base + FTM_OUTMASK);
regmap_read(fpc->regmap, FTM_OUTMASK, &val);
if ((val & 0xFF) == 0xFF)
fpc->period_ns = 0;
@ -402,19 +390,28 @@ static int fsl_pwm_init(struct fsl_pwm_chip *fpc)
if (ret)
return ret;
writel(0x00, fpc->base + FTM_CNTIN);
writel(0x00, fpc->base + FTM_OUTINIT);
writel(0xFF, fpc->base + FTM_OUTMASK);
regmap_write(fpc->regmap, FTM_CNTIN, 0x00);
regmap_write(fpc->regmap, FTM_OUTINIT, 0x00);
regmap_write(fpc->regmap, FTM_OUTMASK, 0xFF);
clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
return 0;
}
static const struct regmap_config fsl_pwm_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = FTM_PWMLOAD,
};
static int fsl_pwm_probe(struct platform_device *pdev)
{
struct fsl_pwm_chip *fpc;
struct resource *res;
void __iomem *base;
int ret;
fpc = devm_kzalloc(&pdev->dev, sizeof(*fpc), GFP_KERNEL);
@ -426,9 +423,16 @@ static int fsl_pwm_probe(struct platform_device *pdev)
fpc->chip.dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
fpc->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(fpc->base))
return PTR_ERR(fpc->base);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
fpc->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
&fsl_pwm_regmap_config);
if (IS_ERR(fpc->regmap)) {
dev_err(&pdev->dev, "regmap init failed\n");
return PTR_ERR(fpc->regmap);
}
fpc->clk[FSL_PWM_CLK_SYS] = devm_clk_get(&pdev->dev, "ftm_sys");
if (IS_ERR(fpc->clk[FSL_PWM_CLK_SYS])) {

View file

@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pwm.h>
#include <linux/of.h>
@ -21,24 +22,30 @@
/* i.MX1 and i.MX21 share the same PWM function block: */
#define MX1_PWMC 0x00 /* PWM Control Register */
#define MX1_PWMS 0x04 /* PWM Sample Register */
#define MX1_PWMP 0x08 /* PWM Period Register */
#define MX1_PWMC 0x00 /* PWM Control Register */
#define MX1_PWMS 0x04 /* PWM Sample Register */
#define MX1_PWMP 0x08 /* PWM Period Register */
#define MX1_PWMC_EN (1 << 4)
#define MX1_PWMC_EN (1 << 4)
/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
#define MX3_PWMCR 0x00 /* PWM Control Register */
#define MX3_PWMSAR 0x0C /* PWM Sample Register */
#define MX3_PWMPR 0x10 /* PWM Period Register */
#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
#define MX3_PWMCR_DOZEEN (1 << 24)
#define MX3_PWMCR_WAITEN (1 << 23)
#define MX3_PWMCR 0x00 /* PWM Control Register */
#define MX3_PWMSR 0x04 /* PWM Status Register */
#define MX3_PWMSAR 0x0C /* PWM Sample Register */
#define MX3_PWMPR 0x10 /* PWM Period Register */
#define MX3_PWMCR_PRESCALER(x) ((((x) - 1) & 0xFFF) << 4)
#define MX3_PWMCR_DOZEEN (1 << 24)
#define MX3_PWMCR_WAITEN (1 << 23)
#define MX3_PWMCR_DBGEN (1 << 22)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_EN (1 << 0)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_SWR (1 << 3)
#define MX3_PWMCR_EN (1 << 0)
#define MX3_PWMSR_FIFOAV_4WORDS 0x4
#define MX3_PWMSR_FIFOAV_MASK 0x7
#define MX3_PWM_SWR_LOOP 5
struct imx_chip {
struct clk *clk_per;
@ -103,9 +110,43 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
struct pwm_device *pwm, int duty_ns, int period_ns)
{
struct imx_chip *imx = to_imx_chip(chip);
struct device *dev = chip->dev;
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
u32 cr;
unsigned int period_ms;
bool enable = test_bit(PWMF_ENABLED, &pwm->flags);
int wait_count = 0, fifoav;
u32 cr, sr;
/*
* i.MX PWMv2 has a 4-word sample FIFO.
* In order to avoid FIFO overflow issue, we do software reset
* to clear all sample FIFO if the controller is disabled or
* wait for a full PWM cycle to get a relinquished FIFO slot
* when the controller is enabled and the FIFO is fully loaded.
*/
if (enable) {
sr = readl(imx->mmio_base + MX3_PWMSR);
fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
period_ms = DIV_ROUND_UP(pwm->period, NSEC_PER_MSEC);
msleep(period_ms);
sr = readl(imx->mmio_base + MX3_PWMSR);
if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
dev_warn(dev, "there is no free FIFO slot\n");
}
} else {
writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
do {
usleep_range(200, 1000);
cr = readl(imx->mmio_base + MX3_PWMCR);
} while ((cr & MX3_PWMCR_SWR) &&
(wait_count++ < MX3_PWM_SWR_LOOP));
if (cr & MX3_PWMCR_SWR)
dev_warn(dev, "software reset timeout\n");
}
c = clk_get_rate(imx->clk_per);
c = c * period_ns;
@ -135,7 +176,7 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
if (test_bit(PWMF_ENABLED, &pwm->flags))
if (enable)
cr |= MX3_PWMCR_EN;
writel(cr, imx->mmio_base + MX3_PWMCR);

View file

@ -0,0 +1,64 @@
/*
* Intel Low Power Subsystem PWM controller PCI driver
*
* Copyright (C) 2014, Intel Corporation
*
* Derived from the original pwm-lpss.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "pwm-lpss.h"
static int pwm_lpss_probe_pci(struct pci_dev *pdev,
const struct pci_device_id *id)
{
const struct pwm_lpss_boardinfo *info;
struct pwm_lpss_chip *lpwm;
int err;
err = pcim_enable_device(pdev);
if (err < 0)
return err;
info = (struct pwm_lpss_boardinfo *)id->driver_data;
lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
if (IS_ERR(lpwm))
return PTR_ERR(lpwm);
pci_set_drvdata(pdev, lpwm);
return 0;
}
static void pwm_lpss_remove_pci(struct pci_dev *pdev)
{
struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
pwm_lpss_remove(lpwm);
}
static const struct pci_device_id pwm_lpss_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&pwm_lpss_byt_info},
{ PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&pwm_lpss_byt_info},
{ PCI_VDEVICE(INTEL, 0x2288), (unsigned long)&pwm_lpss_bsw_info},
{ PCI_VDEVICE(INTEL, 0x2289), (unsigned long)&pwm_lpss_bsw_info},
{ },
};
MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
static struct pci_driver pwm_lpss_driver_pci = {
.name = "pwm-lpss",
.id_table = pwm_lpss_pci_ids,
.probe = pwm_lpss_probe_pci,
.remove = pwm_lpss_remove_pci,
};
module_pci_driver(pwm_lpss_driver_pci);
MODULE_DESCRIPTION("PWM PCI driver for Intel LPSS");
MODULE_LICENSE("GPL v2");

View file

@ -0,0 +1,68 @@
/*
* Intel Low Power Subsystem PWM controller driver
*
* Copyright (C) 2014, Intel Corporation
*
* Derived from the original pwm-lpss.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/acpi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include "pwm-lpss.h"
static int pwm_lpss_probe_platform(struct platform_device *pdev)
{
const struct pwm_lpss_boardinfo *info;
const struct acpi_device_id *id;
struct pwm_lpss_chip *lpwm;
struct resource *r;
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (!id)
return -ENODEV;
info = (const struct pwm_lpss_boardinfo *)id->driver_data;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
lpwm = pwm_lpss_probe(&pdev->dev, r, info);
if (IS_ERR(lpwm))
return PTR_ERR(lpwm);
platform_set_drvdata(pdev, lpwm);
return 0;
}
static int pwm_lpss_remove_platform(struct platform_device *pdev)
{
struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev);
return pwm_lpss_remove(lpwm);
}
static const struct acpi_device_id pwm_lpss_acpi_match[] = {
{ "80860F09", (unsigned long)&pwm_lpss_byt_info },
{ "80862288", (unsigned long)&pwm_lpss_bsw_info },
{ },
};
MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
static struct platform_driver pwm_lpss_driver_platform = {
.driver = {
.name = "pwm-lpss",
.acpi_match_table = pwm_lpss_acpi_match,
},
.probe = pwm_lpss_probe_platform,
.remove = pwm_lpss_remove_platform,
};
module_platform_driver(pwm_lpss_driver_platform);
MODULE_DESCRIPTION("PWM platform driver for Intel LPSS");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:pwm-lpss");

View file

@ -13,15 +13,11 @@
* published by the Free Software Foundation.
*/
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pwm.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
static int pci_drv, plat_drv; /* So we know which drivers registered */
#include "pwm-lpss.h"
#define PWM 0x00000000
#define PWM_ENABLE BIT(31)
@ -39,14 +35,17 @@ struct pwm_lpss_chip {
unsigned long clk_rate;
};
struct pwm_lpss_boardinfo {
unsigned long clk_rate;
};
/* BayTrail */
static const struct pwm_lpss_boardinfo byt_info = {
25000000
const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
.clk_rate = 25000000
};
EXPORT_SYMBOL_GPL(pwm_lpss_byt_info);
/* Braswell */
const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
.clk_rate = 19200000
};
EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info);
static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip)
{
@ -118,9 +117,8 @@ static const struct pwm_ops pwm_lpss_ops = {
.owner = THIS_MODULE,
};
static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev,
struct resource *r,
const struct pwm_lpss_boardinfo *info)
struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
const struct pwm_lpss_boardinfo *info)
{
struct pwm_lpss_chip *lpwm;
int ret;
@ -147,8 +145,9 @@ static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev,
return lpwm;
}
EXPORT_SYMBOL_GPL(pwm_lpss_probe);
static int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
{
u32 ctrl;
@ -157,114 +156,8 @@ static int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
return pwmchip_remove(&lpwm->chip);
}
static int pwm_lpss_probe_pci(struct pci_dev *pdev,
const struct pci_device_id *id)
{
const struct pwm_lpss_boardinfo *info;
struct pwm_lpss_chip *lpwm;
int err;
err = pci_enable_device(pdev);
if (err < 0)
return err;
info = (struct pwm_lpss_boardinfo *)id->driver_data;
lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
if (IS_ERR(lpwm))
return PTR_ERR(lpwm);
pci_set_drvdata(pdev, lpwm);
return 0;
}
static void pwm_lpss_remove_pci(struct pci_dev *pdev)
{
struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
pwm_lpss_remove(lpwm);
pci_disable_device(pdev);
}
static struct pci_device_id pwm_lpss_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&byt_info},
{ PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&byt_info},
{ },
};
MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
static struct pci_driver pwm_lpss_driver_pci = {
.name = "pwm-lpss",
.id_table = pwm_lpss_pci_ids,
.probe = pwm_lpss_probe_pci,
.remove = pwm_lpss_remove_pci,
};
static int pwm_lpss_probe_platform(struct platform_device *pdev)
{
const struct pwm_lpss_boardinfo *info;
const struct acpi_device_id *id;
struct pwm_lpss_chip *lpwm;
struct resource *r;
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (!id)
return -ENODEV;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
info = (struct pwm_lpss_boardinfo *)id->driver_data;
lpwm = pwm_lpss_probe(&pdev->dev, r, info);
if (IS_ERR(lpwm))
return PTR_ERR(lpwm);
platform_set_drvdata(pdev, lpwm);
return 0;
}
static int pwm_lpss_remove_platform(struct platform_device *pdev)
{
struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev);
return pwm_lpss_remove(lpwm);
}
static const struct acpi_device_id pwm_lpss_acpi_match[] = {
{ "80860F09", (unsigned long)&byt_info },
{ },
};
MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
static struct platform_driver pwm_lpss_driver_platform = {
.driver = {
.name = "pwm-lpss",
.acpi_match_table = pwm_lpss_acpi_match,
},
.probe = pwm_lpss_probe_platform,
.remove = pwm_lpss_remove_platform,
};
static int __init pwm_init(void)
{
pci_drv = pci_register_driver(&pwm_lpss_driver_pci);
plat_drv = platform_driver_register(&pwm_lpss_driver_platform);
if (pci_drv && plat_drv)
return pci_drv;
return 0;
}
module_init(pwm_init);
static void __exit pwm_exit(void)
{
if (!pci_drv)
pci_unregister_driver(&pwm_lpss_driver_pci);
if (!plat_drv)
platform_driver_unregister(&pwm_lpss_driver_platform);
}
module_exit(pwm_exit);
EXPORT_SYMBOL_GPL(pwm_lpss_remove);
MODULE_DESCRIPTION("PWM driver for Intel LPSS");
MODULE_AUTHOR("Mika Westerberg <[email protected]>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:pwm-lpss");

32
drivers/pwm/pwm-lpss.h Normal file
View file

@ -0,0 +1,32 @@
/*
* Intel Low Power Subsystem PWM controller driver
*
* Copyright (C) 2014, Intel Corporation
*
* Derived from the original pwm-lpss.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __PWM_LPSS_H
#define __PWM_LPSS_H
#include <linux/device.h>
#include <linux/pwm.h>
struct pwm_lpss_chip;
struct pwm_lpss_boardinfo {
unsigned long clk_rate;
};
extern const struct pwm_lpss_boardinfo pwm_lpss_byt_info;
extern const struct pwm_lpss_boardinfo pwm_lpss_bsw_info;
struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
const struct pwm_lpss_boardinfo *info);
int pwm_lpss_remove(struct pwm_lpss_chip *lpwm);
#endif /* __PWM_LPSS_H */

View file

@ -24,7 +24,9 @@
#define PWM_ENABLE (1 << 0)
#define PWM_CONTINUOUS (1 << 1)
#define PWM_DUTY_POSITIVE (1 << 3)
#define PWM_DUTY_NEGATIVE (0 << 3)
#define PWM_INACTIVE_NEGATIVE (0 << 4)
#define PWM_INACTIVE_POSITIVE (1 << 4)
#define PWM_OUTPUT_LEFT (0 << 5)
#define PWM_LP_DISABLE (0 << 8)
@ -45,8 +47,10 @@ struct rockchip_pwm_regs {
struct rockchip_pwm_data {
struct rockchip_pwm_regs regs;
unsigned int prescaler;
const struct pwm_ops *ops;
void (*set_enable)(struct pwm_chip *chip, bool enable);
void (*set_enable)(struct pwm_chip *chip,
struct pwm_device *pwm, bool enable);
};
static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c)
@ -54,7 +58,8 @@ static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c)
return container_of(c, struct rockchip_pwm_chip, chip);
}
static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip,
struct pwm_device *pwm, bool enable)
{
struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
u32 enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN;
@ -70,14 +75,19 @@ static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
writel_relaxed(val, pc->base + pc->data->regs.ctrl);
}
static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip,
struct pwm_device *pwm, bool enable)
{
struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
PWM_CONTINUOUS | PWM_DUTY_POSITIVE |
PWM_INACTIVE_NEGATIVE;
PWM_CONTINUOUS;
u32 val;
if (pwm->polarity == PWM_POLARITY_INVERSED)
enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
else
enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
val = readl_relaxed(pc->base + pc->data->regs.ctrl);
if (enable)
@ -124,6 +134,19 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return 0;
}
static int rockchip_pwm_set_polarity(struct pwm_chip *chip,
struct pwm_device *pwm,
enum pwm_polarity polarity)
{
/*
* No action needed here because pwm->polarity will be set by the core
* and the core will only change polarity when the PWM is not enabled.
* We'll handle things in set_enable().
*/
return 0;
}
static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
@ -133,7 +156,7 @@ static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
if (ret)
return ret;
pc->data->set_enable(chip, true);
pc->data->set_enable(chip, pwm, true);
return 0;
}
@ -142,18 +165,26 @@ static void rockchip_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
pc->data->set_enable(chip, false);
pc->data->set_enable(chip, pwm, false);
clk_disable(pc->clk);
}
static const struct pwm_ops rockchip_pwm_ops = {
static const struct pwm_ops rockchip_pwm_ops_v1 = {
.config = rockchip_pwm_config,
.enable = rockchip_pwm_enable,
.disable = rockchip_pwm_disable,
.owner = THIS_MODULE,
};
static const struct pwm_ops rockchip_pwm_ops_v2 = {
.config = rockchip_pwm_config,
.set_polarity = rockchip_pwm_set_polarity,
.enable = rockchip_pwm_enable,
.disable = rockchip_pwm_disable,
.owner = THIS_MODULE,
};
static const struct rockchip_pwm_data pwm_data_v1 = {
.regs = {
.duty = 0x04,
@ -162,6 +193,7 @@ static const struct rockchip_pwm_data pwm_data_v1 = {
.ctrl = 0x0c,
},
.prescaler = 2,
.ops = &rockchip_pwm_ops_v1,
.set_enable = rockchip_pwm_set_enable_v1,
};
@ -173,6 +205,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = {
.ctrl = 0x0c,
},
.prescaler = 1,
.ops = &rockchip_pwm_ops_v2,
.set_enable = rockchip_pwm_set_enable_v2,
};
@ -184,6 +217,7 @@ static const struct rockchip_pwm_data pwm_data_vop = {
.ctrl = 0x00,
},
.prescaler = 1,
.ops = &rockchip_pwm_ops_v2,
.set_enable = rockchip_pwm_set_enable_v2,
};
@ -227,10 +261,15 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
pc->data = id->data;
pc->chip.dev = &pdev->dev;
pc->chip.ops = &rockchip_pwm_ops;
pc->chip.ops = pc->data->ops;
pc->chip.base = -1;
pc->chip.npwm = 1;
if (pc->data->ops->set_polarity) {
pc->chip.of_xlate = of_pwm_xlate_with_flags;
pc->chip.of_pwm_n_cells = 3;
}
ret = pwmchip_add(&pc->chip);
if (ret < 0) {
clk_unprepare(pc->clk);