mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-10 22:40:54 -04:00
Merge "bindings: Documentation: update documentation for DSI"
This commit is contained in:
qctecmdr
Gerrit - the friendly Code Review server
commit
5bcb730db4
2 changed files with 13 additions and 111 deletions
|
|
@ -1,108 +0,0 @@
|
|||
Qualcomm Technologies, Inc. MDSS pll for DSI/EDP/HDMI
|
||||
|
||||
mdss-pll is a pll controller device which supports pll devices that
|
||||
are compatible with MIPI display serial interface specification,
|
||||
HDMI and edp.
|
||||
|
||||
Required properties:
|
||||
- compatible: Compatible name used in the driver. Should be one of:
|
||||
"qcom,mdss_dsi_pll_8916", "qcom,mdss_dsi_pll_8939",
|
||||
"qcom,mdss_dsi_pll_8974", "qcom,mdss_dsi_pll_8994",
|
||||
"qcom,mdss_dsi_pll_8994", "qcom,mdss_dsi_pll_8909",
|
||||
"qcom,mdss_hdmi_pll", "qcom,mdss_hdmi_pll_8994",
|
||||
"qcom,mdss_dsi_pll_8992", "qcom,mdss_hdmi_pll_8992",
|
||||
"qcom,mdss_dsi_pll_8996", "qcom,mdss_hdmi_pll_8996",
|
||||
"qcom,mdss_hdmi_pll_8996_v2", "qcom,mdss_dsi_pll_8996_v2",
|
||||
"qcom,mdss_hdmi_pll_8996_v3", "qcom,mdss_hdmi_pll_8996_v3_1p8",
|
||||
"qcom,mdss_edp_pll_8996_v3", "qcom,mdss_edp_pll_8996_v3_1p8",
|
||||
"qcom,mdss_dsi_pll_10nm", "qcom,mdss_dp_pll_8998",
|
||||
"qcom,mdss_hdmi_pll_8998", "qcom,mdss_dp_pll_10nm",
|
||||
"qcom,mdss_dsi_pll_7nm", "qcom,mdss_dp_pll_7nm",
|
||||
"qcom,mdss_dsi_pll_28lpm", "qcom,mdss_dsi_pll_14nm",
|
||||
"qcom,mdss_dp_pll_14nm", "qcom,mdss_dsi_pll_7nm_v2",
|
||||
"qcom,mdss_hdmi_pll_28lpm","qcom,mdss_dsi_pll_7nm_v4_1",
|
||||
"qcom,mdss_dp_pll_7nm_v2"
|
||||
- cell-index: Specifies the controller used
|
||||
- reg: offset and length of the register set for the device.
|
||||
- reg-names : names to refer to register sets related to this device
|
||||
- gdsc-supply: Phandle for gdsc regulator device node.
|
||||
- vddio-supply: Phandle for vddio regulator device node.
|
||||
- clocks: List of Phandles for clock device nodes
|
||||
needed by the device.
|
||||
- clock-names: List of clock names needed by the device.
|
||||
- clock-rate: List of clock rates in Hz.
|
||||
|
||||
Optional properties:
|
||||
- label: A string used to describe the driver used.
|
||||
- vcca-supply: Phandle for vcca regulator device node.
|
||||
|
||||
|
||||
- qcom,dsi-pll-ssc-en: Boolean property to indicate that ssc is enabled.
|
||||
- qcom,dsi-pll-ssc-mode: Spread-spectrum clocking. It can be either "down-spread"
|
||||
or "center-spread". Default is "down-spread" if it is not specified.
|
||||
- qcom,ssc-frequency-hz: Integer property to specify the spread frequency
|
||||
to be programmed for the SSC.
|
||||
- qcom,ssc-ppm: Integer property to specify the Parts per Million
|
||||
value of SSC.
|
||||
|
||||
- qcom,platform-supply-entries: A node that lists the elements of the supply. There
|
||||
can be more than one instance of this binding,
|
||||
in which case the entry would be appended with
|
||||
the supply entry index.
|
||||
e.g. qcom,platform-supply-entry@0
|
||||
- reg: offset and length of the register set for the device.
|
||||
-- qcom,supply-name: name of the supply (vdd/vdda/vddio)
|
||||
-- qcom,supply-min-voltage: minimum voltage level (uV)
|
||||
-- qcom,supply-max-voltage: maximum voltage level (uV)
|
||||
-- qcom,supply-enable-load: load drawn (uA) from enabled supply
|
||||
-- qcom,supply-disable-load: load drawn (uA) from disabled supply
|
||||
-- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
|
||||
-- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
|
||||
-- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
|
||||
-- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
|
||||
|
||||
Example:
|
||||
mdss_dsi0_pll: qcom,mdss_dsi_pll@fd922A00 {
|
||||
compatible = "qcom,mdss_dsi_pll_8974";
|
||||
label = "MDSS DSI 0 PLL";
|
||||
cell-index = <0>;
|
||||
|
||||
reg = <0xfd922A00 0xD4>,
|
||||
<0xfd922900 0x64>,
|
||||
<0xfd8c2300 0x8>;
|
||||
reg-names = "pll_base", "dynamic_pll_base", "gdsc_base";
|
||||
gdsc-supply = <&gdsc_mdss>;
|
||||
vddio-supply = <&pm8941_l12>;
|
||||
vcca-supply = <&pm8941_l28>;
|
||||
|
||||
clocks = <&clock_gcc clk_gcc_mdss_mdp_clk>,
|
||||
<&clock_gcc clk_gcc_mdss_ahb_clk>,
|
||||
<&clock_gcc clk_gcc_mdss_axi_clk>;
|
||||
clock-names = "mdp_core_clk", "iface_clk", "bus_clk";
|
||||
clock-rate = <0>, <0>, <0>;
|
||||
|
||||
qcom,dsi-pll-slave;
|
||||
qcom,dsi-pll-ssc-en;
|
||||
qcom,dsi-pll-ssc-mode = "down-spread";
|
||||
qcom,ssc-frequency-hz = <30000>;
|
||||
qcom,ssc-ppm = <5000>;
|
||||
|
||||
qcom,platform-supply-entries {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
qcom,platform-supply-entry@0 {
|
||||
reg = <0>;
|
||||
qcom,supply-name = "vddio";
|
||||
qcom,supply-min-voltage = <1800000>;
|
||||
qcom,supply-max-voltage = <1800000>;
|
||||
qcom,supply-enable-load = <100000>;
|
||||
qcom,supply-disable-load = <100>;
|
||||
qcom,supply-pre-on-sleep = <0>;
|
||||
qcom,supply-post-on-sleep = <20>;
|
||||
qcom,supply-pre-off-sleep = <0>;
|
||||
qcom,supply-post-off-sleep = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -3,17 +3,18 @@ Qualcomm Technologies, Inc.
|
|||
mdss-dsi is the master DSI device which supports multiple DSI host controllers
|
||||
that are compatible with MIPI display serial interface specification.
|
||||
|
||||
DSI Controller:
|
||||
DSI Controller and PHY:
|
||||
Required properties:
|
||||
- compatible: Should be "qcom,dsi-ctrl-hw-v<version>". Supported
|
||||
versions include 1.4, 2.0 and 2.2.
|
||||
eg: qcom,dsi-ctrl-hw-v1.4, qcom,dsi-ctrl-hw-v2.0,
|
||||
qcom,dsi-ctrl-hw-v2.2, qcom,dsi-ctrl-hw-v2.3,
|
||||
qcom,dsi-ctrl-hw-v2.4
|
||||
qcom,dsi-ctrl-hw-v2.4, qcom,dsi-ctrl-hw-v2.5
|
||||
And for dsi phy driver:
|
||||
qcom,dsi-phy-v0.0-hpm, qcom,dsi-phy-v0.0-lpm,
|
||||
qcom,dsi-phy-v1.0, qcom,dsi-phy-v2.0,
|
||||
qcom,dsi-phy-v3.0, qcom,dsi-phy-v4.0, qcom,dsi-phy-v4.1
|
||||
qcom,dsi-phy-v3.0, qcom,dsi-phy-v4.0,
|
||||
qcom,dsi-phy-v4.1, qcom,dsi-phy-v4.2
|
||||
- reg: Base address and length of DSI controller's memory
|
||||
mapped regions.
|
||||
- reg-names: A list of strings that name the list of regs.
|
||||
|
|
@ -32,6 +33,8 @@ Required properties:
|
|||
"core_clk"
|
||||
"byte_clk_rcg"
|
||||
"pixel_clk_rcg"
|
||||
- pll-label Supported versions of DSI PLL:
|
||||
dsi_pll_5nm
|
||||
- gdsc-supply: phandle to gdsc regulator node.
|
||||
- vdda-supply: phandle to vdda regulator node.
|
||||
- vcca-supply: phandle to vcca regulator node.
|
||||
|
|
@ -116,3 +119,10 @@ Optional properties:
|
|||
specified in Documentation/devicetree/bindings/graph.txt.
|
||||
Video port 0 reg 0 is for the bridge output. The remote
|
||||
endpoint phandle should be mipi_dsi_device device node.
|
||||
- qcom,dsi-pll-ssc-en: Boolean property to indicate that ssc is enabled.
|
||||
- qcom,dsi-pll-ssc-mode: Spread-spectrum clocking. It can be either "down-spread"
|
||||
or "center-spread". Default is "down-spread" if it is not specified.
|
||||
- qcom,ssc-frequency-hz: Integer property to specify the spread frequency
|
||||
to be programmed for the SSC.
|
||||
- qcom,ssc-ppm: Integer property to specify the Parts per Million
|
||||
value of SSC.
|
||||
|
|
|
|||
Loading…
Reference in a new issue