diff --git a/qcom/holi-corfup-common-overlay.dtsi b/qcom/holi-corfup-common-overlay.dtsi
index 2b44f7c45793..10b43d38a5dd 100644
--- a/qcom/holi-corfup-common-overlay.dtsi
+++ b/qcom/holi-corfup-common-overlay.dtsi
@@ -240,6 +240,108 @@
 	};
 };
 
+&sx937x {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&sar_int_default>;
+	pinctrl-1 = <&sar_int_sleep>;
+	interrupt-parent = <&tlmm>;
+	interrupts = <24 0x02>;
+	interrupt-names = "sx937x_irq";
+	Semtech,nirq-gpio = <&tlmm 24 0x02>;
+	cap_vdd-supply = <&pm6150a_l8>;
+	/*use PH4/5/6 as the reference sensor
+	set it to 0xff if the ref-phases-x is not used*/
+	Semtech,ref-phases-a = <4>;
+	Semtech,ref-phases-b = <5>;
+	Semtech,ref-phases-c = <6>;
+	Semtech,button-flag = <0x0f>;
+	Semtech,reg-num = <61>;
+	Semtech,reg-init = <
+		0x8024  0x7F00 		/*PHEN, Disable all Phases*/
+		0x4004  0x74 		/*irq mask*/
+		0x8020  0x10 		/*Set scan period*/
+
+		/*set Phase sampling frequency to 65KHz*/
+		0x8028  0x876 		/*AFE_PARAM_PH0*/
+		0x8034  0x876 		/*AFE_PARAM_PH1*/
+		0x8040  0x876 		/*AFE_PARAM_PH2*/
+		0x804C  0x876    	/*AFE_PARAM_PH3*/
+		0x8058  0x876 		/*AFE_PARAM_PH4*/
+		0x8064  0x876 		/*AFE_PARAM_PH5*/
+		0x8070  0x876 		/*AFE_PARAM_PH6*/
+		/*0x807C  0x876 */	/*AFE_PARAM_PH7*/
+
+		/*set CS3 to hiz, because it used as IRQ pin*/
+		0x8030  0xFEF9FF 	/*REG_AFEPH_PH0, CS5, ANT1, Bottom*/
+		0x803C  0xBFF9FF 	/*REG_AFEPH_PH1, CS7, ANT2, Top Right*/
+		0x8048  0xFFF9FD 	/*REG_AFEPH_PH2, CS0, ANT3, Top Left*/
+		0x8054  0xFFD9FF	/*REG_AFEPH_PH3, CS4, ANT4, Top Right side*/
+		0x8060  0xF7F9FF 	/*REG_AFEPH_PH4, CS6, ANT1_REF, Bottom*/
+		0x806C  0xFFF9EF 	/*REG_AFEPH_PH5, CS1, ANT2_REF, Top Right*/
+		0x8078  0xFFF97F 	/*REG_AFEPH_PH6, CS2, ANT3_REF, Top Left*/
+		0x8084  0xFFF9FF 	/*REG_AFEPH_PH7, NOT USE*/
+
+		/*Set Phase Proximity Threshold*/
+		0x8098  0x00009240		/*prox threshold ph0*/
+		0x80B8  0x00008035		/*prox threshold ph1*/
+		0x80D8  0x00004343		/*prox threshold ph2*/
+		0x80F8  0x00003C3C		/*prox threshold ph3*/
+		0x8118  0x00000000		/*prox threshold ph4*/
+		0x8138  0x00000000		/*prox threshold ph5*/
+		0x8158  0x00000000		/*prox threshold ph6*/
+		/*0x8178 0x00000000*/	/*prox threshold ph7*/
+
+		/*Set Useful Filter*/
+		0x808C  0x20600019		/*PH0 Filter Setup B, non-detect threshold of USE filter*/
+		0x80AC  0x20600019		/*PH1 Filter Setup B, non-detect threshold of USE filter*/
+		0x80CC  0x20600019		/*PH2 Filter Setup B, non-detect threshold of USE filter*/
+		0x80EC  0x20600019		/*PH3 Filter Setup B, non-detect threshold of USE filter*/
+		0x810C  0x20600019		/*PH4 Filter Setup B, non-detect threshold of USE filter*/
+		0x812C  0x20600019		/*PH5 Filter Setup B, non-detect threshold of USE filter*/
+		0x814C  0x20600019		/*PH6 Filter Setup B, non-detect threshold of USE filter*/
+		0x816C  0x20600019		/*PH7 Filter Setup B, non-detect threshold of USE filter*/
+
+		0x8090  0x50D47000
+		0x80B0  0x46D87000
+		0x80D0  0x46D07000
+		0x80F0  0x3CDE7000
+		0x8110  0x50D27000
+		0x8130  0x50D27000
+		0x8150  0x50D27000
+		0x8170  0x50D27000
+
+		/*PH0123 raw filter 1/4*/
+		0x8088  0x300000
+		0x80A8  0x300000
+		0x80C8  0x300000
+		0x80E8  0x300000
+
+		/*PH456 raw filter 1/64*/
+		0x8108  0x600000
+		0x8128  0x600000
+		0x8148  0x600000
+
+		/*Set Reference Phase*/
+		0x8188  0x8000014		/*Reference Correction Setup B ENG1*/
+		0x818C  0x0				/*Reference Correction Setup B ENG2*/
+		0x8190  0x0				/*Reference Correction Setup B ENG3*/
+		0x8194  0x0				/*Reference Correction Setup B ENG4*/
+
+			/*Set Reference Correction*/
+		0x80A0  0x222200E1      /*Reference Correction Setup A PH0*/
+		0x80C0  0x0				/*Reference Correction Setup A PH1*/
+		0x80E0  0x0				/*Reference Correction Setup A PH2*/
+		0x8100  0x0				/*Reference Correction Setup A PH3*/
+		0x8120  0x0				/*Reference Correction Setup A PH4*/
+		0x8140  0x0				/*Reference Correction Setup A PH5*/
+		0x8160  0x0				/*Reference Correction Setup A PH6*/
+		0x8180  0x0				/*Reference Correction Setup A PH7*/
+
+		0x8024  0x7F7F 	/*PHEN, Enable PH0~PH6*/
+	>;
+
+	status = "ok";
+};
 
 &qupv3_se7_i2c {
 	status = "ok";