Update broken web addresses in the kernel.

The patch below updates broken web addresses in the kernel

Signed-off-by: Justin P. Mattock <[email protected]>
Cc: Maciej W. Rozycki <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Finn Thain <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Dimitry Torokhov <[email protected]>
Cc: Mike Frysinger <[email protected]>
Acked-by: Ben Pfaff <[email protected]>
Acked-by: Hans J. Koch <[email protected]>
Reviewed-by: Finn Thain <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

drivers/video/Kconfig

@@ -49,7 +49,7 @@ menuconfig FB
 	  You need an utility program called fbset to make full use of frame
 	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
 	  and the Framebuffer-HOWTO at
-	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
+	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
 	  information.
 
 	  Say Y here and to the driver for your graphics board below if you
@@ -955,7 +955,7 @@ config FB_EPSON1355
 	  Build in support for the SED1355 Epson Research Embedded RAMDAC
 	  LCD/CRT Controller (since redesignated as the S1D13505) as a
 	  framebuffer.  Product specs at
-	  <http://www.erd.epson.com/vdc/html/products.htm>.
+	  <http://vdc.epson.com/>.
 
 config FB_S1D13XXX
 	tristate "Epson S1D13XXX framebuffer support"
@@ -966,7 +966,7 @@ config FB_S1D13XXX
 	help
 	  Support for S1D13XXX framebuffer device family (currently only
 	  working with S1D13806). Product specs at
-	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+	  <http://vdc.epson.com/>
 
 config FB_ATMEL
 	tristate "AT91/AT32 LCD Controller support"
@@ -1323,7 +1323,7 @@ config FB_RADEON
 	  don't need to choose this to run the Radeon in plain VGA mode.
 
 	  There is a product page at
-	  http://apps.ati.com/ATIcompare/
+	  http://products.amd.com/en-us/GraphicCardResult.aspx
 
 config FB_RADEON_I2C
 	bool "DDC/I2C for ATI Radeon support"
@@ -1395,7 +1395,7 @@ config FB_ATY_CT
 	  Say Y here to support use of ATI's 64-bit Rage boards (or other
 	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
 	  framebuffer device.  The ATI product support page for these boards
-	  is at <http://support.ati.com/products/pc/mach64/>.
+	  is at <http://support.ati.com/products/pc/mach64/mach64.html>.
 
 config FB_ATY_GENERIC_LCD
 	bool "Mach64 generic LCD support (EXPERIMENTAL)"

drivers/video/arcfb.c

@@ -2,7 +2,6 @@
  * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board
  *
  * Copyright (C) 2005, Jaya Kumar <jayalk@intworks.biz>
- * http://www.intworks.biz/arclcd
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file COPYING in the main directory of this archive for

drivers/video/epson1355fb.c

@@ -4,7 +4,7 @@
  * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller
  *   (previously known as SED1355)
  *
- * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html
+ * Cf. http://vdc.epson.com/
  *
  *
  * Copyright (C) Hewlett-Packard Company.  All rights reserved.

drivers/video/fbcvt.c

@@ -5,7 +5,7 @@
  *
  *      Based from the VESA(TM) Coordinated Video Timing Generator by
  *      Graham Loveridge April 9, 2003 available at
- *      http://www.vesa.org/public/CVT/CVTd6r1.xls
+ *      http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive

drivers/video/metronomefb.c

@@ -10,7 +10,7 @@
  * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
  *
  * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
+ * Corporation. http://www.eink.com/
  *
  * This driver is written to be used with the Metronome display controller.
  * It is intended to be architecture independent. A board specific driver