mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-13 08:07:32 -04:00
arm/dts: add charger and fg and tcpc dts
add charger and fgauge and cc logic and qc logic dts for charging bring up Change-Id: I5cfeed25f05d03b134408db924cb070a9e6f26be Signed-off-by: wutao <huaqin89@motorola.com> Reviewed-on: https://gerrit.mot.com/2114586 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Huosheng Liao <liaohs@motorola.com> Submit-Approved: Jira Key
This commit is contained in:
wutao
panyq6
parent
8f0dd142dd
commit
6428a5058c
2 changed files with 324 additions and 1 deletions
|
|
@ -26,7 +26,7 @@
|
|||
#include "rhodep-wl286xx.dtsi"
|
||||
#include "tcpc_config.dtsi"
|
||||
#include "sgm7220.dtsi"
|
||||
#include "discrete_charging.dtsi"
|
||||
#include "discrete_charging_rhodep.dtsi"
|
||||
#include "discrete-rt-pd-manger.dtsi"
|
||||
|
||||
|
||||
|
|
|
|||
323
qcom/discrete_charging_rhodep.dtsi
Normal file
323
qcom/discrete_charging_rhodep.dtsi
Normal file
|
|
@ -0,0 +1,323 @@
|
|||
/* Copyright (c) 2021, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
|
||||
&pm6125_vadc {
|
||||
gpio6_div3{
|
||||
reg = <ADC5_GPIO3_DIV3>;
|
||||
label = "gpio3_div3";
|
||||
qcom,pre-scaling = <1 3>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm6125_gpios {
|
||||
gpio6_adc{
|
||||
gpio6_adc_default:gpio6_adc_default{
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
bias-high-impedance;
|
||||
};
|
||||
};
|
||||
|
||||
indicator_led {
|
||||
indicator_led_default: indicator_led_default {
|
||||
pins = "gpio8";
|
||||
function = "func1";
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
indicator_led {
|
||||
compatible = "qcom,indicator-pwm-led";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&indicator_led_default>;
|
||||
indicator_led {
|
||||
label = "charging";
|
||||
led-sources = <0>;
|
||||
pwms = <&pm6125_pwm 0 1000000>;
|
||||
linux,default-trigger = "timer";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus {
|
||||
qcom,pm6125@1 {
|
||||
#address-cells = <1>;
|
||||
qcom,pwms@b300 {
|
||||
status = "ok"
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_se10_i2c {
|
||||
status = "okay";
|
||||
bq2597x-charger@65 {
|
||||
compatible = "ti,bq25970-charger";
|
||||
reg = <0x65>;
|
||||
//ti,bq2597x,interrupt_gpios = <&pio 30 0>;
|
||||
//interrupt-parent = <&pio>;
|
||||
//interrupts = <2 IRQ_TYPE_EDGE_FALLING 2 0>;
|
||||
//interrupt-names = "bq2597x_irq";
|
||||
|
||||
//pinctrl-names = "default_slave";
|
||||
//pinctrl-0 = <&bq2597x_int_default_slave>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <84 0>; //irq num base on hardware design
|
||||
bq2597x,irq-gpio = <&tlmm 84 0>; //irq num base on hardware design
|
||||
|
||||
ti,bq2597x,bat-ovp-disable = <0>;
|
||||
ti,bq2597x,bat-ocp_disable = <0>;
|
||||
ti,bq2597x,bat-ovp-alarm-disable = <0>;
|
||||
ti,bq2597x,bus-ocp-disable = <0>;
|
||||
ti,bq2597x,bus-ovp-alarm-disable = <0>;
|
||||
ti,bq2597x,bus-ocp-alarm-disable = <0>;
|
||||
ti,bq2597x,bat-ucp-alarm-disable = <0>;
|
||||
ti,bq2597x,bat-therm-disable = <0>;
|
||||
ti,bq2597x,bus-therm-disable = <0>;
|
||||
|
||||
ti,bq2597x,bat-ovp-threshold = <4500>;
|
||||
ti,bq2597x,bat-ovp-alarm-threshold = <4450>;
|
||||
ti,bq2597x,bat-ocp-threshold = <8000>;
|
||||
ti,bq2597x,bat-ocp-alarm-threshold = <7500>;
|
||||
|
||||
ti,bq2597x,bus-ovp-threshold = <12000>;
|
||||
ti,bq2597x,bus-ovp-alarm-threshold = <11000>;
|
||||
ti,bq2597x,bus-ocp-threshold = <3750>;
|
||||
ti,bq2597x,bus-ocp-alarm-threshold = <3500>;
|
||||
|
||||
ti,bq2597x,bat-ucp-alarm-threshold = <2000>;
|
||||
|
||||
ti,bq2597x,bat-therm-threshold = <0x15>;
|
||||
ti,bq2597x,bus-therm-threshold = <0x15>;
|
||||
ti,bq2597x,die-therm-threshold = <125>;
|
||||
|
||||
ti,bq2597x,ac-ovp-threshold = <17>;
|
||||
ti,bq2597x,sense-resistor-mohm = <5>;
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_se8_i2c {
|
||||
status = "okay";
|
||||
|
||||
sgm4154x: sgm4154x@3B {
|
||||
status = "okay";
|
||||
compatible = "sgm,sgm41542";
|
||||
reg = <0x3B>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio6_adc_default>;
|
||||
io-channels = <&pm6125_vadc ADC5_GPIO3_DIV3>;
|
||||
io-channel-names = "gpio3_div3";
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <12 0>; //irq num base on hardware design
|
||||
sgm,irq-gpio = <&tlmm 12 0>; //irq num base on hardware design
|
||||
//sgm,chg-en-gpio = <&tlmm 92 0>; //gpio num base on hardware design 1.MTK parent node name is pio 2.QUALCOMM parent node name is tlmm or other
|
||||
|
||||
dpdm-supply = <&usb2_phy0>;
|
||||
mmi,qc3-support;
|
||||
|
||||
/* sw jeita parameter customer defined*/
|
||||
enable_sw_jeita;
|
||||
jeita_temp_above_t4_cv = <0>;
|
||||
jeita_temp_t3_to_t4_cv = <4100000>;
|
||||
jeita_temp_t2_to_t3_cv = <4350000>;
|
||||
jeita_temp_t1_to_t2_cv = <4350000>;
|
||||
jeita_temp_t0_to_t1_cv = <0>;
|
||||
jeita_temp_below_t0_cv = <0>;
|
||||
|
||||
jeita_temp_above_t4_cc_current = <0>;
|
||||
jeita_temp_t3_to_t4_cc_current = <1000000>;
|
||||
jeita_temp_t2_to_t3_cc_current = <1250000>;
|
||||
jeita_temp_t1_to_t2_cc_current = <1000000>;
|
||||
jeita_temp_below_t0_cc_current = <0>;
|
||||
|
||||
temp_t4_thres = <50>;
|
||||
temp_t4_thres_minus_x_degree = <48>;
|
||||
temp_t3_thres = <45>;
|
||||
temp_t3_thres_minus_x_degree = <45>;
|
||||
temp_t2_thres = <20>;
|
||||
temp_t2_thres_plus_x_degree = <15>;
|
||||
temp_t1_thres = <0>;
|
||||
temp_t1_thres_plus_x_degree = <0>;
|
||||
temp_t0_thres = <0>;
|
||||
temp_t0_thres_plus_x_degree = <2>;
|
||||
temp_neg_10_thres = <0>;
|
||||
};
|
||||
|
||||
bq25890@62 {
|
||||
status = "okay";
|
||||
compatible = "ti,bq2589x-1";
|
||||
reg = <0x62>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bq2589x_irq &gpio6_adc_default>;
|
||||
io-channels = <&pm6125_vadc ADC5_GPIO3_DIV3>;
|
||||
io-channel-names = "gpio3_div3";
|
||||
|
||||
bq2589x_irq-gpio = <&tlmm 12 0>;
|
||||
//bq2589x_en-gpio = <&tlmm 92 0>;
|
||||
dpdm-supply = <&usb2_phy0>;
|
||||
|
||||
mmi,qc3-support;
|
||||
ti,bq2589x,vbus-volt-high-level = <8700>;/* tune adapter to output 9v */
|
||||
ti,bq2589x,vbus-volt-low-level = <4400>;/* tune adapter to output 5v */
|
||||
ti,bq2589x,vbat-min-volt-to-tuneup = <3000>;
|
||||
ti,bq2589x,charge-voltage = <4450>;
|
||||
ti,bq2589x,charge-current = <3000>;
|
||||
ti,bq2589x,term-current = <128>;
|
||||
ti,bq2589x,enable-auto-dpdm;
|
||||
ti,bq2589x,enable-termination;
|
||||
ti,bq2589x,enable-ico;
|
||||
ti,bq2589x,use-absolute-vindpm;
|
||||
};
|
||||
|
||||
wt6670f@35 {
|
||||
status = "okay";
|
||||
compatible = "mediatek,wt6670f_qc3p";
|
||||
reg = <0x35>;
|
||||
wt6670f-reset-gpio = <&tlmm 56 0x0>;
|
||||
wt6670f-int-gpio = <&tlmm 85 0x0>;
|
||||
//wt6670f-i2c-scl-pin = <&tlmm 1 0x0>;
|
||||
//wt6670f-i2c-sda-pin = <&tlmm 0 0x0>;
|
||||
|
||||
//pinctrl-names = "default",
|
||||
//"wt6670_i2c_scl_low", "wt6670_i2c_scl_high",
|
||||
//"wt6670_i2c_sda_low", "wt6670_i2c_sda_high",
|
||||
//"wt6670_i2c";
|
||||
|
||||
//pinctrl-0 = <&wt6670_pins_default>;
|
||||
//pinctrl-1 = <&wt6670_pins_scl_low>;
|
||||
//pinctrl-2 = <&wt6670_pins_scl_high>;
|
||||
//pinctrl-3 = <&wt6670_pins_sda_low>;
|
||||
//pinctrl-4 = <&wt6670_pins_sda_high>;
|
||||
//pinctrl-5 = <&wt6670_pins_i2c>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
bq2589x_irq: bq2589x_irq {
|
||||
mux {
|
||||
pins = "gpio12";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio12";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
//add wt6670 pins
|
||||
wt6670_pins_default: wt6670_default_mode {
|
||||
};
|
||||
wt6670_pins_scl_low: wt6670_scl_low {
|
||||
mux {
|
||||
pins = "gpio1";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio1";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
wt6670_pins_scl_high: wt6670_scl_high {
|
||||
mux {
|
||||
pins = "gpio1";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio1";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
wt6670_pins_sda_low: wt6670_sda_low {
|
||||
mux {
|
||||
pins = "gpio0";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio0";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
wt6670_pins_sda_high: wt6670_sda_high {
|
||||
mux {
|
||||
pins = "gpio0";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
config {
|
||||
pins = "gpio0";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
/*
|
||||
wt6670_pins_i2c: wt6670_i2c_mode {
|
||||
pins_cmd_dat {
|
||||
pinmux = <PINMUX_GPIO90__FUNC_SDA6>,
|
||||
<PINMUX_GPIO89__FUNC_SCL6>;
|
||||
};
|
||||
};
|
||||
*/
|
||||
};
|
||||
|
||||
&soc {
|
||||
mmi_charger: mmi,charger {
|
||||
status = "ok"
|
||||
compatible = "mmi,mmi-charger";
|
||||
mmi,enable-charging-limit;
|
||||
mmi,upper-limit-capacity = <65>;
|
||||
mmi,lower-limit-capacity = <60>;
|
||||
mmi,heartbeat-interval = <100000>;
|
||||
mmi,dcp-power-max = <10000>;
|
||||
mmi,hvdcp-power-max = <15000>;
|
||||
};
|
||||
|
||||
mmi_discrete_charger: mmi,discrete-charging {
|
||||
status = "ok"
|
||||
compatible = "mmi,mmi-discrete-charger";
|
||||
#io-channel-cells = <1>;
|
||||
battery-names = "battery";
|
||||
supplied-from = "mmi_battery";
|
||||
|
||||
mmi,chrg-iterm-ma = <243>;
|
||||
mmi,fg-iterm-ma = <500>;
|
||||
mmi,max-fv-mv = <4450>;
|
||||
mmi,max-fcc-ma = <3000>;
|
||||
mmi,demo-fv-mv = <4000>;
|
||||
mmi,otg-cl-ua = <2000000>;
|
||||
mmi,df-serialnum = "SB18D33989";
|
||||
mmi,mmi-temp-zones = <0 4200 970 0>,
|
||||
<10 4200 2500 970>,
|
||||
<15 0 2500 2500>,
|
||||
<45 0 3000 3000>,
|
||||
<60 4200 2500 0>;
|
||||
mmi,thermal-mitigation = <3000000 2500000
|
||||
2000000 1500000
|
||||
1200000 900000
|
||||
600000 300000>;
|
||||
};
|
||||
};
|
||||
|
||||
Loading…
Reference in a new issue