diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index e92975bc8d31..cfe983d86512 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -39,6 +39,17 @@ config QTI_SCMI_MEMLAT_PROTOCOL
 	  This driver defines the comands or message ID's used for this
 	  communication and also exposes the ops used by clients.
 
+config QTI_SCMI_PLH_PROTOCOL
+	tristate "Qualcomm Technologies, Inc. SCMI PLH vendor Protocol"
+	depends on ARM_SCMI_PROTOCOL && QCOM_RIMPS && QGKI
+	help
+	  System Control and Management Interface (SCMI) plh vendor protocol
+	  this protocol provides interface to communicate with micro controller
+	  which is executing the plh algorithm
+
+	  This driver defines the comands or message ID's used for this
+	  communication and also exposes the ops used by clients.
+
 config ARM_SCMI_POWER_DOMAIN
 	tristate "SCMI power domain driver"
 	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index eeabc570042d..3a463ac60fca 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -5,3 +5,4 @@ scmi-driver-y = driver.o
 scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
 obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
 obj-$(CONFIG_QTI_SCMI_MEMLAT_PROTOCOL) += memlat_vendor.o
+obj-$(CONFIG_QTI_SCMI_PLH_PROTOCOL) += plh_vendor.o
diff --git a/drivers/firmware/arm_scmi/plh_vendor.c b/drivers/firmware/arm_scmi/plh_vendor.c
new file mode 100644
index 000000000000..710244eb176b
--- /dev/null
+++ b/drivers/firmware/arm_scmi/plh_vendor.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "common.h"
+
+#define SCMI_VENDOR_MSG_MAX_TX_SIZE		(100) /* in bytes */
+#define SCMI_VENDOR_MSG_START			(3)
+#define SCMI_VENDOR_MSG_PLH_START		(16)
+
+enum scmi_plh_protocol_cmd {
+	PERF_LOCK_SET_LOG_LEVEL = SCMI_VENDOR_MSG_START,
+	PERF_LOCK_SCROLL_INIT_IPC_FREQ_TBL_MSG_ID = SCMI_VENDOR_MSG_PLH_START,
+	PERF_LOCK_SCROLL_START_MSG_ID,
+	PERF_LOCK_SCROLL_STOP_MSG_ID,
+	PERF_LOCK_MAX_MSG_ID,
+};
+
+
+static int scmi_plh_scroll_init_ipc_freq_tbl(const struct scmi_handle *handle,
+			u16 *p_init_args, u16 init_len)
+{
+	int ret, i = 0;
+	struct scmi_xfer *t;
+	uint32_t *msg, msg_size, msg_val, align_init_len = init_len;
+
+	if (init_len % 2)
+		align_init_len += 1; /* align in multiple of u32 */
+
+	msg_size = align_init_len * sizeof(*p_init_args);
+
+	if (msg_size > SCMI_VENDOR_MSG_MAX_TX_SIZE)
+		return -EINVAL;
+
+	ret = scmi_xfer_get_init(handle, PERF_LOCK_SCROLL_INIT_IPC_FREQ_TBL_MSG_ID,
+				SCMI_PROTOCOL_PLH,
+				(msg_size), sizeof(uint32_t), &t);
+	if (ret)
+		return ret;
+
+	msg = t->tx.buf;
+
+	for (i = 0; i < init_len/2 ; i++) {
+		msg_val = *p_init_args++;
+		msg_val |= ((*p_init_args++) << 16);
+		*msg++ = cpu_to_le32(msg_val);
+	}
+
+	if (init_len % 2)
+		*msg = cpu_to_le32(*p_init_args);
+
+	ret = scmi_do_xfer(handle, t);
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+
+static int scmi_send_start_stop(const struct scmi_handle *handle,
+			u16 fps, u32 msg_id)
+{
+	int ret = 0;
+	struct scmi_xfer *t;
+	uint32_t *msg;
+
+	ret = scmi_xfer_get_init(handle, msg_id,
+				SCMI_PROTOCOL_PLH,
+				sizeof(*msg), sizeof(uint32_t), &t);
+	if (ret)
+		return ret;
+
+	msg = t->tx.buf;
+	*msg = cpu_to_le32(fps);
+	ret = scmi_do_xfer(handle, t);
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_plh_scroll_start_cmd(const struct scmi_handle *handle,
+			u16 fps)
+{
+	return scmi_send_start_stop(handle, fps, PERF_LOCK_SCROLL_START_MSG_ID);
+}
+
+static int scmi_plh_scroll_stop_cmd(const struct scmi_handle *handle)
+{
+	return scmi_send_start_stop(handle, 0, PERF_LOCK_SCROLL_STOP_MSG_ID);
+}
+
+static int scmi_plh_set_log_level(const struct scmi_handle *handle,
+			u16 val)
+{
+	int ret = 0;
+	struct scmi_xfer *t;
+	uint32_t *msg;
+
+	ret = scmi_xfer_get_init(handle, PERF_LOCK_SET_LOG_LEVEL,
+				SCMI_PROTOCOL_PLH, sizeof(*msg),
+				sizeof(uint32_t), &t);
+	if (ret)
+		return ret;
+
+	msg = t->tx.buf;
+	*msg = cpu_to_le32(val);
+	ret = scmi_do_xfer(handle, t);
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static struct scmi_plh_vendor_ops plh_ops = {
+	.init_splh_ipc_freq_tbl = scmi_plh_scroll_init_ipc_freq_tbl,
+	.start_splh = scmi_plh_scroll_start_cmd,
+	.stop_splh = scmi_plh_scroll_stop_cmd,
+	.set_plh_log_level = scmi_plh_set_log_level,
+};
+
+static int scmi_plh_vendor_protocol_init(struct scmi_handle *handle)
+{
+	u32 version;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_PLH, &version);
+
+	dev_dbg(handle->dev, "PLH version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	handle->plh_ops = &plh_ops;
+
+	return 0;
+}
+
+static int __init scmi_plh_init(void)
+{
+	return scmi_protocol_register(SCMI_PROTOCOL_PLH,
+				      &scmi_plh_vendor_protocol_init);
+}
+subsys_initcall(scmi_plh_init);
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 6f0c03b0b8f6..ac125cd94bb6 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -747,6 +747,19 @@ config QTI_SYSTEM_PM
 config QTI_SYSTEM_PM_RPM
 	bool
 
+config QTI_PLH_SCMI_CLIENT
+	tristate "Qualcomm Technologies Inc. SCMI client driver for PLH"
+	depends on QTI_PLH
+	default n
+	help
+	  SCMI client driver registers itself with SCMI framework for PLH
+	  vendor protocol, and also registers with the plh interface driver
+	  msm_performance.
+
+	  This driver deliver the PLH vendor protocol handle to interface
+	  driver, and interface driver will use this handle to communicate
+	  with RIMPS PLH.
+
 config QTI_HW_MEMLAT
 	tristate "Qualcomm Technologies Inc. RIMPS memlat interface driver"
 	depends on PERF_EVENTS
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 98557a7f9b35..66207079ef97 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_MSM_RPM_SMD)   +=  rpm-smd-debug.o
 endif
 obj-$(CONFIG_QTI_SYS_PM_VX) += sys_pm_vx.o
 obj-$(CONFIG_ICNSS2) += icnss2/
+obj-$(CONFIG_QTI_PLH_SCMI_CLIENT) += plh_scmi.o
 obj-$(CONFIG_QTI_HW_MEMLAT_SCMI_CLIENT)	+= memlat_scmi.o
 obj-$(CONFIG_QTI_HW_MEMLAT) += rimps_memlat.o
 obj-$(CONFIG_QTI_HW_MEMLAT_LOG)	+= rimps_log.o
diff --git a/drivers/soc/qcom/plh_scmi.c b/drivers/soc/qcom/plh_scmi.c
new file mode 100644
index 000000000000..67ddad6413a5
--- /dev/null
+++ b/drivers/soc/qcom/plh_scmi.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/scmi_protocol.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+
+extern void rimps_plh_init(struct scmi_handle *handle);
+
+static int scmi_plh_probe(struct scmi_device *sdev)
+{
+	struct scmi_handle *handle = sdev->handle;
+
+	if (!handle || !handle->plh_ops)
+		return -ENODEV;
+
+	rimps_plh_init(handle);
+	return 0;
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+	{ SCMI_PROTOCOL_PLH },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_plh_drv = {
+	.name		= "scmi-plh-driver",
+	.probe		= scmi_plh_probe,
+	.id_table	= scmi_id_table,
+};
+module_scmi_driver(scmi_plh_drv);
+
+MODULE_DESCRIPTION("ARM SCMI PLH driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 63c5a8edcd20..65ebd4f01223 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -266,6 +266,26 @@ struct scmi_memlat_vendor_ops {
 };
 #endif
 
+#ifdef CONFIG_QTI_SCMI_PLH_PROTOCOL
+/**
+ * struct scmi_plh_vendor_ops - represents the various operations provided
+ *	by SCMI PLH Protocol
+ *
+ * @init_splh_ipc_freq_tbl: initialize scroll plh ipc freq voting table in rimps
+ * @start_splh: starts scroll plh in rimps
+ * @stop_splh: stops scroll plh in rimps
+ * @set_plh_log_level: configure the supported log_level in plh module of rimps
+ */
+struct scmi_plh_vendor_ops {
+	int (*init_splh_ipc_freq_tbl)(const struct scmi_handle *handle,
+				u16 *p_init_args, u16 init_len);
+	int (*start_splh)(const struct scmi_handle *handle,	u16 fps);
+	int (*stop_splh)(const struct scmi_handle *handle);
+	int (*set_plh_log_level)(const struct scmi_handle *handle,
+				u16 log_level);
+};
+#endif
+
 /**
  * struct scmi_handle - Handle returned to ARM SCMI clients for usage.
  *
@@ -297,6 +317,9 @@ struct scmi_handle {
 	struct scmi_reset_ops *reset_ops;
 #ifdef CONFIG_QTI_SCMI_MEMLAT_PROTOCOL
 	struct scmi_memlat_vendor_ops *memlat_ops;
+#endif
+#ifdef CONFIG_QTI_SCMI_PLH_PROTOCOL
+	struct scmi_plh_vendor_ops *plh_ops;
 #endif
 	/* for protocol internal use */
 	void *perf_priv;
@@ -317,6 +340,9 @@ enum scmi_std_protocol {
 #ifdef CONFIG_QTI_SCMI_MEMLAT_PROTOCOL
 	SCMI_PROTOCOL_MEMLAT = 0x80,
 #endif
+#ifdef CONFIG_QTI_SCMI_PLH_PROTOCOL
+	SCMI_PROTOCOL_PLH = 0x81,
+#endif
 };
 
 struct scmi_device {