diff --git a/holi-camera-pm6125-overlay.dtsi b/holi-camera-pm6125-overlay.dtsi
new file mode 100644
index 000000000000..c6c1a183c269
--- /dev/null
+++ b/holi-camera-pm6125-overlay.dtsi
@@ -0,0 +1,33 @@
+&soc {
+	cam_csiphy0: qcom,csiphy0 {
+		mipi-csi-vdd1-supply = <&L7A>;
+		mipi-csi-vdd2-supply = <&L4A>;
+		rgltr-min-voltage = <0 880000 1200000>;
+		rgltr-max-voltage = <0 1050000 1300000>;
+		rgltr-load-current = <0 15900 8900>;
+	};
+
+	cam_csiphy1: qcom,csiphy1 {
+		mipi-csi-vdd1-supply = <&L7A>;
+		mipi-csi-vdd2-supply = <&L4A>;
+		rgltr-min-voltage = <0 880000 1200000>;
+		rgltr-max-voltage = <0 1050000 1300000>;
+		rgltr-load-current = <0 15900 8900>;
+	};
+
+	cam_csiphy2: qcom,csiphy2 {
+		mipi-csi-vdd1-supply = <&L7A>;
+		mipi-csi-vdd2-supply = <&L4A>;
+		rgltr-min-voltage = <0 880000 1200000>;
+		rgltr-max-voltage = <0 1050000 1300000>;
+		rgltr-load-current = <0 15900 8900>;
+	};
+
+	cam_csiphy3: qcom,csiphy3 {
+		mipi-csi-vdd1-supply = <&L7A>;
+		mipi-csi-vdd2-supply = <&L4A>;
+		rgltr-min-voltage = <0 880000 1200000>;
+		rgltr-max-voltage = <0 1050000 1300000>;
+		rgltr-load-current = <0 15900 8900>;
+	};
+};
diff --git a/holi-camera-sensor-pm6125-cdp.dtsi b/holi-camera-sensor-pm6125-cdp.dtsi
new file mode 100644
index 000000000000..1e2ead27039c
--- /dev/null
+++ b/holi-camera-sensor-pm6125-cdp.dtsi
@@ -0,0 +1,424 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok";
+	};
+};
+
+&cam_cci0 {
+	actuator_rear: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok";
+	};
+
+	eeprom_rear: qcom,eeprom0 {
+		cell-index = <0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L4P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_rear0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_rear0_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	eeprom_rear_aux2: qcom,eeprom3 {
+		cell-index = <3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_rear1_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_rear1_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/* Rear*/
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear>;
+		eeprom-src = <&eeprom_rear>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L4P>;
+		cam_vaf-supply = <&L5P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vaf", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 2800000 1056000 0>;
+		rgltr-load-current = <120000 80000 100000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_rear0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_rear0_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*Rear Aux2*/
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_rear_aux2>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_rear1_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_rear1_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG0*/
+	qcom,cam-tpg0 {
+		cell-index = <4>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <4>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG1*/
+	qcom,cam-tpg1 {
+		cell-index = <5>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <5>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG2*/
+	qcom,cam-tpg2 {
+		cell-index = <6>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <6>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+};
+
+&cam_cci1 {
+	actuator_rear_aux: qcom,actuator1 {
+		cell-index = <1>;
+		compatible = "qcom,actuator";
+		cci-master= <0>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok";
+	};
+
+	eeprom_front: qcom,eeprom2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0>;
+		rgltr-load-current = <0 80000 105000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front0_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_rear_aux: qcom,eeprom1 {
+		cell-index = <1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L7P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_rear2_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_rear2_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*Front*/
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0>;
+		rgltr-load-current = <0 80000 105000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front0_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	/*Rear Aux*/
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear_aux>;
+		eeprom-src = <&eeprom_rear_aux>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L7P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_rear2_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_rear2_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+};
diff --git a/holi-camera-sensor-pm6125-mtp.dtsi b/holi-camera-sensor-pm6125-mtp.dtsi
new file mode 100644
index 000000000000..1e2ead27039c
--- /dev/null
+++ b/holi-camera-sensor-pm6125-mtp.dtsi
@@ -0,0 +1,424 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok";
+	};
+};
+
+&cam_cci0 {
+	actuator_rear: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok";
+	};
+
+	eeprom_rear: qcom,eeprom0 {
+		cell-index = <0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L4P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_rear0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_rear0_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	eeprom_rear_aux2: qcom,eeprom3 {
+		cell-index = <3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_rear1_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_rear1_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/* Rear*/
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear>;
+		eeprom-src = <&eeprom_rear>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L4P>;
+		cam_vaf-supply = <&L5P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vaf", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 2800000 1056000 0>;
+		rgltr-load-current = <120000 80000 100000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_rear0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_rear0_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*Rear Aux2*/
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_rear_aux2>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_rear1_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_rear1_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG0*/
+	qcom,cam-tpg0 {
+		cell-index = <4>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <4>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG1*/
+	qcom,cam-tpg1 {
+		cell-index = <5>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <5>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG2*/
+	qcom,cam-tpg2 {
+		cell-index = <6>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <6>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+};
+
+&cam_cci1 {
+	actuator_rear_aux: qcom,actuator1 {
+		cell-index = <1>;
+		compatible = "qcom,actuator";
+		cci-master= <0>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok";
+	};
+
+	eeprom_front: qcom,eeprom2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0>;
+		rgltr-load-current = <0 80000 105000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front0_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_rear_aux: qcom,eeprom1 {
+		cell-index = <1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L7P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_rear2_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_rear2_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*Front*/
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0>;
+		rgltr-load-current = <0 80000 105000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front0_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	/*Rear Aux*/
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear_aux>;
+		eeprom-src = <&eeprom_rear_aux>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L7P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_rear2_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_rear2_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+};
diff --git a/holi-camera-sensor-usbc-pm6125-mtp.dtsi b/holi-camera-sensor-usbc-pm6125-mtp.dtsi
new file mode 100644
index 000000000000..1e2ead27039c
--- /dev/null
+++ b/holi-camera-sensor-usbc-pm6125-mtp.dtsi
@@ -0,0 +1,424 @@
+#include <dt-bindings/clock/qcom,gcc-holi.h>
+&soc {
+	qcom,cam-res-mgr {
+		compatible = "qcom,cam-res-mgr";
+		status = "ok";
+	};
+};
+
+&cam_cci0 {
+	actuator_rear: qcom,actuator0 {
+		cell-index = <0>;
+		compatible = "qcom,actuator";
+		cci-master = <0>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok";
+	};
+
+	eeprom_rear: qcom,eeprom0 {
+		cell-index = <0>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L4P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_rear0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_rear0_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	eeprom_rear_aux2: qcom,eeprom3 {
+		cell-index = <3>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_rear1_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_rear1_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/* Rear*/
+	qcom,cam-sensor0 {
+		cell-index = <0>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <0>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear>;
+		eeprom-src = <&eeprom_rear>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L4P>;
+		cam_vaf-supply = <&L5P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vaf", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 2800000 1056000 0>;
+		rgltr-load-current = <120000 80000 100000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk0_active
+				&cam_sensor_rear0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk0_suspend
+				&cam_sensor_rear0_reset_suspend>;
+		gpios = <&tlmm 29 0>,
+			<&tlmm 34 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK0",
+					"CAM_RESET0";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*Rear Aux2*/
+	qcom,cam-sensor3 {
+		cell-index = <3>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <1>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		eeprom-src = <&eeprom_rear_aux2>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				&cam_sensor_rear1_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				&cam_sensor_rear1_reset_suspend>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		cci-master = <1>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG0*/
+	qcom,cam-tpg0 {
+		cell-index = <4>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <4>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG1*/
+	qcom,cam-tpg1 {
+		cell-index = <5>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <5>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*TPG2*/
+	qcom,cam-tpg2 {
+		cell-index = <6>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <6>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		gpios = <&tlmm 30 0>,
+			<&tlmm 35 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK1",
+					"CAM_RESET1";
+		sensor-mode = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+};
+
+&cam_cci1 {
+	actuator_rear_aux: qcom,actuator1 {
+		cell-index = <1>;
+		compatible = "qcom,actuator";
+		cci-master= <0>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vaf";
+		rgltr-cntrl-support;
+		rgltr-min-voltage = <2800000>;
+		rgltr-max-voltage = <2800000>;
+		rgltr-load-current = <100000>;
+		status = "ok";
+	};
+
+	eeprom_front: qcom,eeprom2 {
+		cell-index = <2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0>;
+		rgltr-load-current = <0 80000 105000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front0_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	eeprom_rear_aux: qcom,eeprom1 {
+		cell-index = <1>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L7P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		cam_vaf-supply = <&L5P>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk", "cam_vaf";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2800000>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0 2800000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_rear2_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_rear2_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+
+	/*Front*/
+	qcom,cam-sensor2 {
+		cell-index = <2>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <3>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <0>;
+		eeprom-src = <&eeprom_front>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L3P>;
+		cam_vdig-supply = <&L2P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1056000 0>;
+		rgltr-max-voltage = <1800000 2800000 1056000 0>;
+		rgltr-load-current = <0 80000 105000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk3_active
+				&cam_sensor_front0_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk3_suspend
+				&cam_sensor_front0_reset_suspend>;
+		gpios = <&tlmm 32 0>,
+			<&tlmm 37 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK3",
+					"CAM_RESET3";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK3_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <24000000>;
+	};
+
+	/*Rear Aux*/
+	qcom,cam-sensor1 {
+		cell-index = <1>;
+		compatible = "qcom,cam-sensor";
+		csiphy-sd-index = <2>;
+		sensor-position-roll = <270>;
+		sensor-position-pitch = <0>;
+		sensor-position-yaw = <180>;
+		actuator-src = <&actuator_rear_aux>;
+		eeprom-src = <&eeprom_rear_aux>;
+		cam_vio-supply = <&L6P>;
+		cam_vana-supply = <&L7P>;
+		cam_vdig-supply = <&L1P>;
+		cam_clk-supply = <&gcc_camss_top_gdsc>;
+		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
+			"cam_clk";
+		rgltr-cntrl-support;
+		pwm-switch;
+		rgltr-min-voltage = <1800000 2800000 1200000 0>;
+		rgltr-max-voltage = <1800000 2800000 1200000 0>;
+		rgltr-load-current = <120000 80000 1200000 0>;
+		gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk2_active
+				&cam_sensor_rear2_reset_active>;
+		pinctrl-1 = <&cam_sensor_mclk2_suspend
+				&cam_sensor_rear2_reset_suspend>;
+		gpios = <&tlmm 31 0>,
+			<&tlmm 36 0>;
+		gpio-reset = <1>;
+		gpio-req-tbl-num = <0 1>;
+		gpio-req-tbl-flags = <1 0>;
+		gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2";
+		sensor-mode = <0>;
+		cci-master = <0>;
+		status = "ok";
+		clocks = <&gcc GCC_CAMSS_MCLK2_CLK>;
+		clock-names = "cam_clk";
+		clock-cntl-level = "turbo";
+		clock-rates = <19200000>;
+	};
+};