mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-09 05:39:54 -04:00
phy: qcom-ufs: add 7nm UFS QMP PHY support on Lahaina
This change adds the 7nm UFS QMP PHY driver support on Lahaina. Change-Id: I554884ef658ba759e7a917ab66cc992718f08fe4 Signed-off-by: Can Guo <cang@codeaurora.org>
This commit is contained in:
Can Guo
parent
47bdb5f1ce
commit
685c9d3a16
7 changed files with 793 additions and 7 deletions
|
|
@ -61,6 +61,12 @@ config PHY_QCOM_UFS
|
|||
|
||||
if PHY_QCOM_UFS
|
||||
|
||||
config PHY_QCOM_UFS_V4
|
||||
tristate
|
||||
default PHY_QCOM_UFS
|
||||
help
|
||||
Support for 7nm UFS QMP phy present on QCOM chipsets.
|
||||
|
||||
config PHY_QCOM_UFS_14NM
|
||||
tristate
|
||||
default PHY_QCOM_UFS
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
|
|||
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
|
||||
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS_V4) += phy-qcom-ufs-qmp-v4-lahaina.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
|
||||
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
|
||||
|
|
|
|||
|
|
@ -113,6 +113,7 @@ struct ufs_qcom_phy {
|
|||
* and writes to QSERDES_RX_SIGDET_CNTRL attribute
|
||||
* @ctrl_rx_linecfg: pointer to a function that controls the enable/disable of
|
||||
* Rx line config
|
||||
* @dbg_register_dump: pointer to a function that dumps phy registers for debug.
|
||||
*/
|
||||
struct ufs_qcom_phy_specific_ops {
|
||||
int (*calibrate)(struct ufs_qcom_phy *ufs_qcom_phy, bool is_rate_B,
|
||||
|
|
@ -122,6 +123,7 @@ struct ufs_qcom_phy_specific_ops {
|
|||
void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
|
||||
void (*power_control)(struct ufs_qcom_phy *phy, bool val);
|
||||
void (*ctrl_rx_linecfg)(struct ufs_qcom_phy *phy, bool ctrl);
|
||||
void (*dbg_register_dump)(struct ufs_qcom_phy *phy);
|
||||
};
|
||||
|
||||
struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
|
||||
|
|
@ -139,4 +141,9 @@ int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
|
|||
struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A,
|
||||
struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B,
|
||||
bool is_rate_B);
|
||||
void ufs_qcom_phy_write_tbl(struct ufs_qcom_phy *ufs_qcom_phy,
|
||||
struct ufs_qcom_phy_calibration *tbl,
|
||||
int tbl_size);
|
||||
int ufs_qcom_phy_dump_regs(struct ufs_qcom_phy *phy,
|
||||
int offset, int len, char *prefix);
|
||||
#endif
|
||||
|
|
|
|||
287
drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-lahaina.c
Normal file
287
drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-lahaina.c
Normal file
|
|
@ -0,0 +1,287 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (c) 2019, Linux Foundation. All rights reserved.
|
||||
*/
|
||||
|
||||
#include "phy-qcom-ufs-qmp-v4-lahaina.h"
|
||||
|
||||
#define UFS_PHY_NAME "ufs_phy_qmp_v4_lahaina"
|
||||
|
||||
static
|
||||
int ufs_qcom_phy_qmp_v4_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
|
||||
bool is_rate_B, bool is_g4)
|
||||
{
|
||||
writel_relaxed(0x01, ufs_qcom_phy->mmio + UFS_PHY_SW_RESET);
|
||||
/* Ensure PHY is in reset before writing PHY calibration data */
|
||||
wmb();
|
||||
/*
|
||||
* Writing PHY calibration in this order:
|
||||
* 1. Write Rate-A calibration first (1-lane mode).
|
||||
* 2. Write 2nd lane configuration if needed.
|
||||
* 3. Write Rate-B calibration overrides
|
||||
*/
|
||||
if (is_g4) {
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy, phy_cal_table_rate_A,
|
||||
ARRAY_SIZE(phy_cal_table_rate_A));
|
||||
if (ufs_qcom_phy->lanes_per_direction == 2)
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy,
|
||||
phy_cal_table_2nd_lane,
|
||||
ARRAY_SIZE(phy_cal_table_2nd_lane));
|
||||
} else {
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy, phy_cal_table_rate_A_no_g4,
|
||||
ARRAY_SIZE(phy_cal_table_rate_A_no_g4));
|
||||
if (ufs_qcom_phy->lanes_per_direction == 2)
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy,
|
||||
phy_cal_table_2nd_lane_no_g4,
|
||||
ARRAY_SIZE(phy_cal_table_2nd_lane_no_g4));
|
||||
}
|
||||
if (is_rate_B)
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy, phy_cal_table_rate_B,
|
||||
ARRAY_SIZE(phy_cal_table_rate_B));
|
||||
|
||||
writel_relaxed(0x00, ufs_qcom_phy->mmio + UFS_PHY_SW_RESET);
|
||||
/* flush buffered writes */
|
||||
wmb();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_init(struct phy *generic_phy)
|
||||
{
|
||||
struct ufs_qcom_phy_qmp_v4 *phy = phy_get_drvdata(generic_phy);
|
||||
struct ufs_qcom_phy *phy_common = &phy->common_cfg;
|
||||
int err;
|
||||
|
||||
err = ufs_qcom_phy_init_clks(phy_common);
|
||||
if (err) {
|
||||
dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
|
||||
__func__, err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
err = ufs_qcom_phy_init_vregulators(phy_common);
|
||||
if (err) {
|
||||
dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
|
||||
__func__, err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_exit(struct phy *generic_phy)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static
|
||||
int ufs_qcom_phy_qmp_v4_set_mode(struct phy *generic_phy,
|
||||
enum phy_mode mode, int submode)
|
||||
{
|
||||
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
|
||||
|
||||
phy_common->mode = PHY_MODE_INVALID;
|
||||
|
||||
if (mode > 0)
|
||||
phy_common->mode = mode;
|
||||
|
||||
phy_common->submode = submode;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline
|
||||
void ufs_qcom_phy_qmp_v4_tx_pull_down_ctrl(struct ufs_qcom_phy *phy,
|
||||
bool enable)
|
||||
{
|
||||
u32 temp;
|
||||
|
||||
temp = readl_relaxed(phy->mmio + QSERDES_RX0_RX_INTERFACE_MODE);
|
||||
if (enable)
|
||||
temp |= QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT;
|
||||
else
|
||||
temp &= ~QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT;
|
||||
writel_relaxed(temp, phy->mmio + QSERDES_RX0_RX_INTERFACE_MODE);
|
||||
|
||||
if (phy->lanes_per_direction == 1)
|
||||
goto out;
|
||||
|
||||
temp = readl_relaxed(phy->mmio + QSERDES_RX1_RX_INTERFACE_MODE);
|
||||
if (enable)
|
||||
temp |= QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT;
|
||||
else
|
||||
temp &= ~QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT;
|
||||
writel_relaxed(temp, phy->mmio + QSERDES_RX1_RX_INTERFACE_MODE);
|
||||
|
||||
out:
|
||||
/* ensure register value is committed */
|
||||
mb();
|
||||
}
|
||||
|
||||
static
|
||||
void ufs_qcom_phy_qmp_v4_power_control(struct ufs_qcom_phy *phy,
|
||||
bool power_ctrl)
|
||||
{
|
||||
if (!power_ctrl) {
|
||||
/* apply analog power collapse */
|
||||
writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
|
||||
/*
|
||||
* Make sure that PHY knows its analog rail is going to be
|
||||
* powered OFF.
|
||||
*/
|
||||
mb();
|
||||
ufs_qcom_phy_qmp_v4_tx_pull_down_ctrl(phy, true);
|
||||
} else {
|
||||
ufs_qcom_phy_qmp_v4_tx_pull_down_ctrl(phy, false);
|
||||
/* bring PHY out of analog power collapse */
|
||||
writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
|
||||
|
||||
/*
|
||||
* Before any transactions involving PHY, ensure PHY knows
|
||||
* that it's analog rail is powered ON.
|
||||
*/
|
||||
mb();
|
||||
}
|
||||
}
|
||||
|
||||
static inline
|
||||
void ufs_qcom_phy_qmp_v4_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
|
||||
{
|
||||
/*
|
||||
* v4 PHY does not have TX_LANE_ENABLE register.
|
||||
* Implement this function so as not to propagate error to caller.
|
||||
*/
|
||||
}
|
||||
|
||||
static
|
||||
void ufs_qcom_phy_qmp_v4_ctrl_rx_linecfg(struct ufs_qcom_phy *phy, bool ctrl)
|
||||
{
|
||||
u32 temp;
|
||||
|
||||
temp = readl_relaxed(phy->mmio + UFS_PHY_LINECFG_DISABLE);
|
||||
|
||||
if (ctrl) /* enable RX LineCfg */
|
||||
temp &= ~UFS_PHY_RX_LINECFG_DISABLE_BIT;
|
||||
else /* disable RX LineCfg */
|
||||
temp |= UFS_PHY_RX_LINECFG_DISABLE_BIT;
|
||||
|
||||
writel_relaxed(temp, phy->mmio + UFS_PHY_LINECFG_DISABLE);
|
||||
/* make sure that RX LineCfg config applied before we return */
|
||||
mb();
|
||||
}
|
||||
|
||||
static inline void ufs_qcom_phy_qmp_v4_start_serdes(struct ufs_qcom_phy *phy)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
|
||||
tmp &= ~MASK_SERDES_START;
|
||||
tmp |= (1 << OFFSET_SERDES_START);
|
||||
writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
|
||||
/* Ensure register value is committed */
|
||||
mb();
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_is_pcs_ready(struct ufs_qcom_phy *phy_common)
|
||||
{
|
||||
int err = 0;
|
||||
u32 val;
|
||||
|
||||
err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
|
||||
val, (val & MASK_PCS_READY), 10, 1000000);
|
||||
if (err) {
|
||||
dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
|
||||
__func__, err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static void ufs_qcom_phy_qmp_v4_dbg_register_dump(struct ufs_qcom_phy *phy)
|
||||
{
|
||||
ufs_qcom_phy_dump_regs(phy, COM_BASE, COM_SIZE,
|
||||
"PHY QSERDES COM Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, PHY_BASE, PHY_SIZE,
|
||||
"PHY Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, RX_BASE(0), RX_SIZE,
|
||||
"PHY RX0 Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, TX_BASE(0), TX_SIZE,
|
||||
"PHY TX0 Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, RX_BASE(1), RX_SIZE,
|
||||
"PHY RX1 Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, TX_BASE(1), TX_SIZE,
|
||||
"PHY TX1 Registers ");
|
||||
}
|
||||
|
||||
static const struct phy_ops ufs_qcom_phy_qmp_v4_phy_ops = {
|
||||
.init = ufs_qcom_phy_qmp_v4_init,
|
||||
.exit = ufs_qcom_phy_qmp_v4_exit,
|
||||
.power_on = ufs_qcom_phy_power_on,
|
||||
.power_off = ufs_qcom_phy_power_off,
|
||||
.set_mode = ufs_qcom_phy_qmp_v4_set_mode,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_specific_ops phy_v4_ops = {
|
||||
.calibrate = ufs_qcom_phy_qmp_v4_phy_calibrate,
|
||||
.start_serdes = ufs_qcom_phy_qmp_v4_start_serdes,
|
||||
.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_v4_is_pcs_ready,
|
||||
.set_tx_lane_enable = ufs_qcom_phy_qmp_v4_set_tx_lane_enable,
|
||||
.ctrl_rx_linecfg = ufs_qcom_phy_qmp_v4_ctrl_rx_linecfg,
|
||||
.power_control = ufs_qcom_phy_qmp_v4_power_control,
|
||||
.dbg_register_dump = ufs_qcom_phy_qmp_v4_dbg_register_dump,
|
||||
};
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct phy *generic_phy;
|
||||
struct ufs_qcom_phy_qmp_v4 *phy;
|
||||
int err = 0;
|
||||
|
||||
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
||||
if (!phy) {
|
||||
err = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
|
||||
generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
|
||||
&ufs_qcom_phy_qmp_v4_phy_ops, &phy_v4_ops);
|
||||
|
||||
if (!generic_phy) {
|
||||
dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
|
||||
__func__);
|
||||
err = -EIO;
|
||||
goto out;
|
||||
}
|
||||
|
||||
phy_set_drvdata(generic_phy, phy);
|
||||
|
||||
strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
|
||||
sizeof(phy->common_cfg.name));
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static const struct of_device_id ufs_qcom_phy_qmp_v4_of_match[] = {
|
||||
{.compatible = "qcom,ufs-phy-qmp-v4-lahaina"},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_v4_of_match);
|
||||
|
||||
static struct platform_driver ufs_qcom_phy_qmp_v4_driver = {
|
||||
.probe = ufs_qcom_phy_qmp_v4_probe,
|
||||
.driver = {
|
||||
.of_match_table = ufs_qcom_phy_qmp_v4_of_match,
|
||||
.name = "ufs_qcom_phy_qmp_v4_lahaina",
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(ufs_qcom_phy_qmp_v4_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP v4 LAHAINA");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
443
drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-lahaina.h
Normal file
443
drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-lahaina.h
Normal file
|
|
@ -0,0 +1,443 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
/*
|
||||
* Copyright (c) 2019, Linux Foundation. All rights reserved.
|
||||
*/
|
||||
|
||||
#ifndef UFS_QCOM_PHY_QMP_V4_H_
|
||||
#define UFS_QCOM_PHY_QMP_V4_H_
|
||||
|
||||
#include "phy-qcom-ufs-i.h"
|
||||
|
||||
/* QCOM UFS PHY control registers */
|
||||
#define COM_BASE 0x000
|
||||
#define COM_SIZE 0x1C0
|
||||
#define PHY_BASE 0xC00
|
||||
#define PHY_SIZE 0x200
|
||||
#define TX_BASE(n) (0x400 + (0x400 * n))
|
||||
#define TX_SIZE 0x16C
|
||||
#define RX_BASE(n) (0x600 + (0x400 * n))
|
||||
#define RX_SIZE 0x200
|
||||
#define COM_OFF(x) (COM_BASE + x)
|
||||
#define PHY_OFF(x) (PHY_BASE + x)
|
||||
#define TX_OFF(n, x) (TX_BASE(n) + x)
|
||||
#define RX_OFF(n, x) (RX_BASE(n) + x)
|
||||
|
||||
/* UFS PHY QSERDES COM registers */
|
||||
#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0x94)
|
||||
#define QSERDES_COM_HSCLK_SEL COM_OFF(0x158)
|
||||
#define QSERDES_COM_HSCLK_HS_SWITCH_SEL COM_OFF(0x15C)
|
||||
#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xA4)
|
||||
#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x10C)
|
||||
#define QSERDES_COM_PLL_IVCO COM_OFF(0x58)
|
||||
#define QSERDES_COM_VCO_TUNE_INITVAL2 COM_OFF(0x124)
|
||||
#define QSERDES_COM_BIN_VCOCAL_HSCLK_SEL COM_OFF(0x1BC)
|
||||
#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xBC)
|
||||
#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x74)
|
||||
#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x7C)
|
||||
#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x84)
|
||||
#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0xAC)
|
||||
#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0xB0)
|
||||
#define QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0 COM_OFF(0x1AC)
|
||||
#define QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0 COM_OFF(0x1B0)
|
||||
#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xC4)
|
||||
#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x78)
|
||||
#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x80)
|
||||
#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x88)
|
||||
#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0xB4)
|
||||
#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0xB8)
|
||||
#define QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1 COM_OFF(0x1B4)
|
||||
#define QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1 COM_OFF(0x1B8)
|
||||
#define QSERDES_COM_CMN_IPTRIM COM_OFF(0x60)
|
||||
|
||||
/* UFS PHY registers */
|
||||
#define UFS_PHY_PHY_START PHY_OFF(0x00)
|
||||
#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
|
||||
#define UFS_PHY_SW_RESET PHY_OFF(0x08)
|
||||
#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x180)
|
||||
#define UFS_PHY_LINECFG_DISABLE PHY_OFF(0x148)
|
||||
#define UFS_PHY_MULTI_LANE_CTRL1 PHY_OFF(0x1E0)
|
||||
#define UFS_PHY_RX_SIGDET_CTRL2 PHY_OFF(0x158)
|
||||
#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x30)
|
||||
#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x38)
|
||||
#define UFS_PHY_TX_MID_TERM_CTRL1 PHY_OFF(0x1D8)
|
||||
#define UFS_PHY_DEBUG_BUS_CLKSEL PHY_OFF(0x124)
|
||||
#define UFS_PHY_PLL_CNTL PHY_OFF(0x2C)
|
||||
#define UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB PHY_OFF(0x0C)
|
||||
#define UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB PHY_OFF(0x10)
|
||||
#define UFS_PHY_TX_PWM_GEAR_BAND PHY_OFF(0x160)
|
||||
#define UFS_PHY_TX_HS_GEAR_BAND PHY_OFF(0x168)
|
||||
#define UFS_PHY_TX_HSGEAR_CAPABILITY PHY_OFF(0x74)
|
||||
#define UFS_PHY_RX_HSGEAR_CAPABILITY PHY_OFF(0xB4)
|
||||
#define UFS_PHY_RX_MIN_HIBERN8_TIME PHY_OFF(0x150)
|
||||
#define UFS_PHY_BIST_FIXED_PAT_CTRL PHY_OFF(0x60)
|
||||
|
||||
/* UFS PHY TX registers */
|
||||
#define QSERDES_TX0_PWM_GEAR_1_DIVIDER_BAND0_1 TX_OFF(0, 0xD8)
|
||||
#define QSERDES_TX0_PWM_GEAR_2_DIVIDER_BAND0_1 TX_OFF(0, 0xDC)
|
||||
#define QSERDES_TX0_PWM_GEAR_3_DIVIDER_BAND0_1 TX_OFF(0, 0xE0)
|
||||
#define QSERDES_TX0_PWM_GEAR_4_DIVIDER_BAND0_1 TX_OFF(0, 0xE4)
|
||||
#define QSERDES_TX0_LANE_MODE_1 TX_OFF(0, 0x84)
|
||||
#define QSERDES_TX0_TRAN_DRVR_EMP_EN TX_OFF(0, 0xC0)
|
||||
|
||||
#define QSERDES_TX1_PWM_GEAR_1_DIVIDER_BAND0_1 TX_OFF(1, 0xD8)
|
||||
#define QSERDES_TX1_PWM_GEAR_2_DIVIDER_BAND0_1 TX_OFF(1, 0xDC)
|
||||
#define QSERDES_TX1_PWM_GEAR_3_DIVIDER_BAND0_1 TX_OFF(1, 0xE0)
|
||||
#define QSERDES_TX1_PWM_GEAR_4_DIVIDER_BAND0_1 TX_OFF(1, 0xE4)
|
||||
#define QSERDES_TX1_LANE_MODE_1 TX_OFF(1, 0x84)
|
||||
#define QSERDES_TX1_TRAN_DRVR_EMP_EN TX_OFF(1, 0xC0)
|
||||
|
||||
/* UFS PHY RX registers */
|
||||
#define QSERDES_RX0_SIGDET_LVL RX_OFF(0, 0x120)
|
||||
#define QSERDES_RX0_SIGDET_CNTRL RX_OFF(0, 0x11C)
|
||||
#define QSERDES_RX0_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x124)
|
||||
#define QSERDES_RX0_RX_BAND RX_OFF(0, 0x128)
|
||||
#define QSERDES_RX0_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x30)
|
||||
#define QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE RX_OFF(0, 0x34)
|
||||
#define QSERDES_RX0_UCDR_PI_CONTROLS RX_OFF(0, 0x44)
|
||||
#define QSERDES_RX0_UCDR_FASTLOCK_COUNT_LOW RX_OFF(0, 0x3C)
|
||||
#define QSERDES_RX0_UCDR_PI_CTRL2 RX_OFF(0, 0x48)
|
||||
#define QSERDES_RX0_RX_TERM_BW RX_OFF(0, 0x80)
|
||||
#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL1 RX_OFF(0, 0xE8)
|
||||
#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xEC)
|
||||
#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3 RX_OFF(0, 0xF0)
|
||||
#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4 RX_OFF(0, 0xF4)
|
||||
#define QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1 RX_OFF(0, 0x110)
|
||||
#define QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2 RX_OFF(0, 0x114)
|
||||
#define QSERDES_RX0_RX_IDAC_MEASURE_TIME RX_OFF(0, 0x100)
|
||||
#define QSERDES_RX0_RX_IDAC_TSETTLE_LOW RX_OFF(0, 0xF8)
|
||||
#define QSERDES_RX0_RX_IDAC_TSETTLE_HIGH RX_OFF(0, 0xFC)
|
||||
#define QSERDES_RX0_RX_MODE_00_LOW RX_OFF(0, 0x15C)
|
||||
#define QSERDES_RX0_RX_MODE_00_HIGH RX_OFF(0, 0x160)
|
||||
#define QSERDES_RX0_RX_MODE_00_HIGH2 RX_OFF(0, 0x164)
|
||||
#define QSERDES_RX0_RX_MODE_00_HIGH3 RX_OFF(0, 0x168)
|
||||
#define QSERDES_RX0_RX_MODE_00_HIGH4 RX_OFF(0, 0x16C)
|
||||
#define QSERDES_RX0_RX_MODE_01_LOW RX_OFF(0, 0x170)
|
||||
#define QSERDES_RX0_RX_MODE_01_HIGH RX_OFF(0, 0x174)
|
||||
#define QSERDES_RX0_RX_MODE_01_HIGH2 RX_OFF(0, 0x178)
|
||||
#define QSERDES_RX0_RX_MODE_01_HIGH3 RX_OFF(0, 0x17C)
|
||||
#define QSERDES_RX0_RX_MODE_01_HIGH4 RX_OFF(0, 0x180)
|
||||
#define QSERDES_RX0_RX_MODE_10_LOW RX_OFF(0, 0x184)
|
||||
#define QSERDES_RX0_RX_MODE_10_HIGH RX_OFF(0, 0x188)
|
||||
#define QSERDES_RX0_RX_MODE_10_HIGH2 RX_OFF(0, 0x18C)
|
||||
#define QSERDES_RX0_RX_MODE_10_HIGH3 RX_OFF(0, 0x190)
|
||||
#define QSERDES_RX0_RX_MODE_10_HIGH4 RX_OFF(0, 0x194)
|
||||
#define QSERDES_RX0_DCC_CTRL1 RX_OFF(0, 0x1A8)
|
||||
#define QSERDES_RX0_GM_CAL RX_OFF(0, 0xDC)
|
||||
#define QSERDES_RX0_AC_JTAG_ENABLE RX_OFF(0, 0x68)
|
||||
#define QSERDES_RX0_UCDR_FO_GAIN RX_OFF(0, 0x08)
|
||||
#define QSERDES_RX0_UCDR_SO_GAIN RX_OFF(0, 0x14)
|
||||
#define QSERDES_RX0_RX_INTERFACE_MODE RX_OFF(0, 0x134)
|
||||
|
||||
#define QSERDES_RX1_SIGDET_LVL RX_OFF(1, 0x120)
|
||||
#define QSERDES_RX1_SIGDET_CNTRL RX_OFF(1, 0x11C)
|
||||
#define QSERDES_RX1_SIGDET_DEGLITCH_CNTRL RX_OFF(1, 0x124)
|
||||
#define QSERDES_RX1_RX_BAND RX_OFF(1, 0x128)
|
||||
#define QSERDES_RX1_UCDR_FASTLOCK_FO_GAIN RX_OFF(1, 0x30)
|
||||
#define QSERDES_RX1_UCDR_SO_SATURATION_AND_ENABLE RX_OFF(1, 0x34)
|
||||
#define QSERDES_RX1_UCDR_PI_CONTROLS RX_OFF(1, 0x44)
|
||||
#define QSERDES_RX1_UCDR_FASTLOCK_COUNT_LOW RX_OFF(1, 0x3C)
|
||||
#define QSERDES_RX1_UCDR_PI_CTRL2 RX_OFF(1, 0x48)
|
||||
#define QSERDES_RX1_RX_TERM_BW RX_OFF(1, 0x80)
|
||||
#define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL1 RX_OFF(1, 0xE8)
|
||||
#define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(1, 0xEC)
|
||||
#define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL3 RX_OFF(1, 0xF0)
|
||||
#define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL4 RX_OFF(1, 0xF4)
|
||||
#define QSERDES_RX1_RX_EQ_OFFSET_ADAPTOR_CNTRL1 RX_OFF(1, 0x110)
|
||||
#define QSERDES_RX1_RX_OFFSET_ADAPTOR_CNTRL2 RX_OFF(1, 0x114)
|
||||
#define QSERDES_RX1_RX_IDAC_MEASURE_TIME RX_OFF(1, 0x100)
|
||||
#define QSERDES_RX1_RX_IDAC_TSETTLE_LOW RX_OFF(1, 0xF8)
|
||||
#define QSERDES_RX1_RX_IDAC_TSETTLE_HIGH RX_OFF(1, 0xFC)
|
||||
#define QSERDES_RX1_RX_MODE_00_LOW RX_OFF(1, 0x15C)
|
||||
#define QSERDES_RX1_RX_MODE_00_HIGH RX_OFF(1, 0x160)
|
||||
#define QSERDES_RX1_RX_MODE_00_HIGH2 RX_OFF(1, 0x164)
|
||||
#define QSERDES_RX1_RX_MODE_00_HIGH3 RX_OFF(1, 0x168)
|
||||
#define QSERDES_RX1_RX_MODE_00_HIGH4 RX_OFF(1, 0x16C)
|
||||
#define QSERDES_RX1_RX_MODE_01_LOW RX_OFF(1, 0x170)
|
||||
#define QSERDES_RX1_RX_MODE_01_HIGH RX_OFF(1, 0x174)
|
||||
#define QSERDES_RX1_RX_MODE_01_HIGH2 RX_OFF(1, 0x178)
|
||||
#define QSERDES_RX1_RX_MODE_01_HIGH3 RX_OFF(1, 0x17C)
|
||||
#define QSERDES_RX1_RX_MODE_01_HIGH4 RX_OFF(1, 0x180)
|
||||
#define QSERDES_RX1_RX_MODE_10_LOW RX_OFF(1, 0x184)
|
||||
#define QSERDES_RX1_RX_MODE_10_HIGH RX_OFF(1, 0x188)
|
||||
#define QSERDES_RX1_RX_MODE_10_HIGH2 RX_OFF(1, 0x18C)
|
||||
#define QSERDES_RX1_RX_MODE_10_HIGH3 RX_OFF(1, 0x190)
|
||||
#define QSERDES_RX1_RX_MODE_10_HIGH4 RX_OFF(1, 0x194)
|
||||
#define QSERDES_RX1_DCC_CTRL1 RX_OFF(1, 0x1A8)
|
||||
#define QSERDES_RX1_GM_CAL RX_OFF(1, 0xDC)
|
||||
#define QSERDES_RX1_AC_JTAG_ENABLE RX_OFF(1, 0x68)
|
||||
#define QSERDES_RX1_UCDR_FO_GAIN RX_OFF(1, 0x08)
|
||||
#define QSERDES_RX1_UCDR_SO_GAIN RX_OFF(1, 0x14)
|
||||
#define QSERDES_RX1_RX_INTERFACE_MODE RX_OFF(1, 0x134)
|
||||
|
||||
#define UFS_PHY_RX_LINECFG_DISABLE_BIT BIT(1)
|
||||
#define QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT BIT(5)
|
||||
|
||||
/*
|
||||
* This structure represents the v4 specific phy.
|
||||
* common_cfg MUST remain the first field in this structure
|
||||
* in case extra fields are added. This way, when calling
|
||||
* get_ufs_qcom_phy() of generic phy, we can extract the
|
||||
* common phy structure (struct ufs_qcom_phy) out of it
|
||||
* regardless of the relevant specific phy.
|
||||
*/
|
||||
struct ufs_qcom_phy_qmp_v4 {
|
||||
struct ufs_qcom_phy common_cfg;
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xD9),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x11),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_HS_SWITCH_SEL, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IVCO, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x36),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xAC),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x36),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xDD),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_LANE_MODE_1, 0xE5),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_TRAN_DRVR_EMP_EN, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_CNTRL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_BAND, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_FO_GAIN, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x5A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CONTROLS, 0xF1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_COUNT_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CTRL2, 0x81),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FO_GAIN, 0x0E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_GAIN, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_TERM_BW, 0x6F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL1, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x09),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x07),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_MEASURE_TIME, 0x20),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_LOW, 0x3F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH2, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH3, 0x7F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH4, 0x2C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_LOW, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH2, 0xED),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH4, 0x3C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH4, 0xB1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_DCC_CTRL1, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_GM_CAL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL2, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x10),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_DRV_LVL, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_MID_TERM_CTRL1, 0x43),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_DEBUG_BUS_CLKSEL, 0x1F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_HIBERN8_TIME, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_BIST_FIXED_PAT_CTRL, 0x0A),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_no_g4[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xD9),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x11),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_HS_SWITCH_SEL, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IVCO, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x36),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xAC),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x36),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xDD),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_LANE_MODE_1, 0x35),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_TRAN_DRVR_EMP_EN, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_CNTRL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_BAND, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_FO_GAIN, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x5A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CONTROLS, 0xF1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_COUNT_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CTRL2, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FO_GAIN, 0x0E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_GAIN, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_TERM_BW, 0x1B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_MEASURE_TIME, 0x10),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xC0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_LOW, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH2, 0xED),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH4, 0x3C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH4, 0xB1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH4, 0xB1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL2, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_DRV_LVL, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_MID_TERM_CTRL1, 0x43),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_DEBUG_BUS_CLKSEL, 0x1F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_HIBERN8_TIME, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PLL_CNTL, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB, 0xD8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_PWM_GEAR_BAND, 0xAA),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_HS_GEAR_BAND, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_HSGEAR_CAPABILITY, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HSGEAR_CAPABILITY, 0x03),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_2nd_lane[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_LANE_MODE_1, 0xE5),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_TRAN_DRVR_EMP_EN, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_CNTRL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_DEGLITCH_CNTRL, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_BAND, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_FO_GAIN, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_SATURATION_AND_ENABLE, 0x5A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CONTROLS, 0xF1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_COUNT_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CTRL2, 0x81),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FO_GAIN, 0x0E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_GAIN, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_TERM_BW, 0x6F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL1, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL3, 0x09),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL4, 0x07),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_MEASURE_TIME, 0x20),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_TSETTLE_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_TSETTLE_HIGH, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_LOW, 0x3F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH2, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH3, 0x7F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH4, 0x2C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_LOW, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH2, 0xED),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH4, 0x3C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH4, 0xB1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_DCC_CTRL1, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_GM_CAL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_MULTI_LANE_CTRL1, 0x02),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_2nd_lane_no_g4[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_LANE_MODE_1, 0x35),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_TRAN_DRVR_EMP_EN, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_CNTRL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_DEGLITCH_CNTRL, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_BAND, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_FO_GAIN, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_SATURATION_AND_ENABLE, 0x5A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CONTROLS, 0xF1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_COUNT_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CTRL2, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FO_GAIN, 0x0E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_GAIN, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_TERM_BW, 0x1B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL2, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL3, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL4, 0x1D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_MEASURE_TIME, 0x10),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_TSETTLE_LOW, 0xC0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_TSETTLE_HIGH, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_LOW, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH2, 0xED),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH4, 0x3C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH4, 0xB1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH4, 0xB1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_MULTI_LANE_CTRL1, 0x02),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x06),
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
@ -15,13 +15,24 @@
|
|||
|
||||
#define UFS_PHY_DEFAULT_LANES_PER_DIRECTION 1
|
||||
|
||||
void ufs_qcom_phy_write_tbl(struct ufs_qcom_phy *ufs_qcom_phy,
|
||||
struct ufs_qcom_phy_calibration *tbl,
|
||||
int tbl_size)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < tbl_size; i++)
|
||||
writel_relaxed(tbl[i].cfg_value,
|
||||
ufs_qcom_phy->mmio + tbl[i].reg_offset);
|
||||
}
|
||||
EXPORT_SYMBOL(ufs_qcom_phy_write_tbl);
|
||||
|
||||
int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
|
||||
struct ufs_qcom_phy_calibration *tbl_A,
|
||||
int tbl_size_A,
|
||||
struct ufs_qcom_phy_calibration *tbl_B,
|
||||
int tbl_size_B, bool is_rate_B)
|
||||
{
|
||||
int i;
|
||||
int ret = 0;
|
||||
|
||||
if (!tbl_A) {
|
||||
|
|
@ -30,9 +41,7 @@ int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
|
|||
goto out;
|
||||
}
|
||||
|
||||
for (i = 0; i < tbl_size_A; i++)
|
||||
writel_relaxed(tbl_A[i].cfg_value,
|
||||
ufs_qcom_phy->mmio + tbl_A[i].reg_offset);
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy, tbl_A, tbl_size_A);
|
||||
|
||||
/*
|
||||
* In case we would like to work in rate B, we need
|
||||
|
|
@ -48,9 +57,7 @@ int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
|
|||
goto out;
|
||||
}
|
||||
|
||||
for (i = 0; i < tbl_size_B; i++)
|
||||
writel_relaxed(tbl_B[i].cfg_value,
|
||||
ufs_qcom_phy->mmio + tbl_B[i].reg_offset);
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy, tbl_B, tbl_size_B);
|
||||
}
|
||||
|
||||
/* flush buffered writes */
|
||||
|
|
@ -721,6 +728,40 @@ void ufs_qcom_phy_ctrl_rx_linecfg(struct phy *generic_phy, bool ctrl)
|
|||
}
|
||||
EXPORT_SYMBOL(ufs_qcom_phy_ctrl_rx_linecfg);
|
||||
|
||||
int ufs_qcom_phy_dump_regs(struct ufs_qcom_phy *phy, int offset,
|
||||
int len, char *prefix)
|
||||
{
|
||||
u32 *regs;
|
||||
size_t pos;
|
||||
|
||||
if (offset % 4 != 0 || len % 4 != 0) /* keep readl happy */
|
||||
return -EINVAL;
|
||||
|
||||
regs = kzalloc(len, GFP_KERNEL);
|
||||
if (!regs)
|
||||
return -ENOMEM;
|
||||
|
||||
for (pos = 0; pos < len; pos += 4)
|
||||
regs[pos / 4] = readl_relaxed(phy->mmio + offset + pos);
|
||||
|
||||
print_hex_dump(KERN_ERR, prefix,
|
||||
len > 4 ? DUMP_PREFIX_OFFSET : DUMP_PREFIX_NONE,
|
||||
16, 4, regs, len, false);
|
||||
kfree(regs);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(ufs_qcom_phy_dump_regs);
|
||||
|
||||
void ufs_qcom_phy_dbg_register_dump(struct phy *generic_phy)
|
||||
{
|
||||
struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
|
||||
|
||||
if (ufs_qcom_phy->phy_spec_ops->dbg_register_dump)
|
||||
ufs_qcom_phy->phy_spec_ops->dbg_register_dump(ufs_qcom_phy);
|
||||
}
|
||||
EXPORT_SYMBOL(ufs_qcom_phy_dbg_register_dump);
|
||||
|
||||
MODULE_AUTHOR("Yaniv Gardi <ygardi@codeaurora.org>");
|
||||
MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
|
||||
MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY");
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@
|
|||
|
||||
void ufs_qcom_phy_ctrl_rx_linecfg(struct phy *generic_phy, bool ctrl);
|
||||
void ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes);
|
||||
void ufs_qcom_phy_dbg_register_dump(struct phy *generic_phy);
|
||||
|
||||
#endif /* PHY_QCOM_UFS_H_ */
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue