mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-29 19:21:31 -04:00
Merge branch 'topic/isa' into topic/misc
This commit is contained in:
Takashi Iwai
commit
6ab561c8aa
6417 changed files with 428529 additions and 339631 deletions
|
|
@ -300,6 +300,74 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
|||
control correctly. If you have problems regarding this, try
|
||||
another ALSA compliant mixer (alsamixer works).
|
||||
|
||||
Module snd-azt1605
|
||||
------------------
|
||||
|
||||
Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605
|
||||
chipset.
|
||||
|
||||
port - port # for BASE (0x220,0x240,0x260,0x280)
|
||||
wss_port - port # for WSS (0x530,0x604,0xe80,0xf40)
|
||||
irq - IRQ # for WSS (7,9,10,11)
|
||||
dma1 - DMA # for WSS playback (0,1,3)
|
||||
dma2 - DMA # for WSS capture (0,1), -1 = disabled (default)
|
||||
mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
|
||||
mpu_irq - IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
|
||||
fm_port - port # for OPL3 (0x388), -1 = disabled (default)
|
||||
|
||||
This module supports multiple cards. It does not support autoprobe: port,
|
||||
wss_port, irq and dma1 have to be specified. The other values are
|
||||
optional.
|
||||
|
||||
"port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
|
||||
or the value stored in the card's EEPROM for cards that have an EEPROM and
|
||||
their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
|
||||
be choosen freely from the options enumerated above.
|
||||
|
||||
If dma2 is specified and different from dma1, the card will operate in
|
||||
full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
|
||||
enable capture since only channels 0 and 1 are available for capture.
|
||||
|
||||
Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
|
||||
mpu_port=0x330 mpu_irq=9 fm_port=0x388".
|
||||
|
||||
Whatever IRQ and DMA channels you pick, be sure to reserve them for
|
||||
legacy ISA in your BIOS.
|
||||
|
||||
Module snd-azt2316
|
||||
------------------
|
||||
|
||||
Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316
|
||||
chipset.
|
||||
|
||||
port - port # for BASE (0x220,0x240,0x260,0x280)
|
||||
wss_port - port # for WSS (0x530,0x604,0xe80,0xf40)
|
||||
irq - IRQ # for WSS (7,9,10,11)
|
||||
dma1 - DMA # for WSS playback (0,1,3)
|
||||
dma2 - DMA # for WSS capture (0,1), -1 = disabled (default)
|
||||
mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
|
||||
mpu_irq - IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
|
||||
fm_port - port # for OPL3 (0x388), -1 = disabled (default)
|
||||
|
||||
This module supports multiple cards. It does not support autoprobe: port,
|
||||
wss_port, irq and dma1 have to be specified. The other values are
|
||||
optional.
|
||||
|
||||
"port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
|
||||
or the value stored in the card's EEPROM for cards that have an EEPROM and
|
||||
their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
|
||||
be choosen freely from the options enumerated above.
|
||||
|
||||
If dma2 is specified and different from dma1, the card will operate in
|
||||
full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
|
||||
enable capture since only channels 0 and 1 are available for capture.
|
||||
|
||||
Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
|
||||
mpu_port=0x330 mpu_irq=9 fm_port=0x388".
|
||||
|
||||
Whatever IRQ and DMA channels you pick, be sure to reserve them for
|
||||
legacy ISA in your BIOS.
|
||||
|
||||
Module snd-aw2
|
||||
--------------
|
||||
|
||||
|
|
@ -1285,7 +1353,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
|||
about this driver. Note that it has been discontinued, but the
|
||||
Voyetra Turtle Beach knowledge base entry for it is still available
|
||||
at
|
||||
http://www.turtlebeach.com/site/kb_ftp/790.asp
|
||||
http://www.turtlebeach.com
|
||||
|
||||
Module snd-msnd-pinnacle
|
||||
------------------------
|
||||
|
|
@ -1641,20 +1709,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
|||
|
||||
This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
|
||||
|
||||
Module snd-sgalaxy
|
||||
------------------
|
||||
|
||||
Module for Aztech Sound Galaxy sound card.
|
||||
|
||||
sbport - Port # for SB16 interface (0x220,0x240)
|
||||
wssport - Port # for WSS interface (0x530,0xe80,0xf40,0x604)
|
||||
irq - IRQ # (7,9,10,11)
|
||||
dma1 - DMA #
|
||||
|
||||
This module supports multiple cards.
|
||||
|
||||
The power-management is supported.
|
||||
|
||||
Module snd-sscape
|
||||
-----------------
|
||||
|
||||
|
|
|
|||
|
|
@ -562,7 +562,7 @@ compare the codec registers directly.
|
|||
Send a bug report either the followings:
|
||||
|
||||
kernel-bugzilla::
|
||||
http://bugme.linux-foundation.org/
|
||||
https://bugzilla.kernel.org/
|
||||
alsa-devel ML::
|
||||
[email protected]
|
||||
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97
|
|||
frame is 21uS long and is divided into 13 time slots.
|
||||
|
||||
The AC97 specification can be found at :-
|
||||
http://www.intel.com/design/chipsets/audio/ac97_r23.pdf
|
||||
http://www.intel.com/p/en_US/business/design
|
||||
|
||||
|
||||
I2S
|
||||
|
|
|
|||
|
|
@ -143,7 +143,7 @@ struct snd_soc_ops {
|
|||
};
|
||||
|
||||
Please refer to the ALSA driver PCM documentation for details.
|
||||
http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
|
||||
http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
|
||||
|
||||
|
||||
5 - DAPM description.
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ struct snd_soc_platform {
|
|||
};
|
||||
|
||||
Please refer to the ALSA driver documentation for details of audio DMA.
|
||||
http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
|
||||
http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
|
||||
|
||||
An example DMA driver is soc/pxa/pxa2xx-pcm.c
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ with OSS API.
|
|||
|
||||
Packages "snd-util-3.8.tar.gz" and "snd-data-0.1.tar.Z"
|
||||
contain useful utilities to be used with this driver.
|
||||
See http://www.opensound.com/ossfree/getting.html for
|
||||
See http://www.opensound.com/ossfree/ for
|
||||
download instructions.
|
||||
|
||||
If you are looking for the installation instructions, please
|
||||
|
|
@ -1438,7 +1438,7 @@ of this driver (see http://www.4Front-tech.com/oss.html for more info).
|
|||
There are some common audio chipsets that are not supported yet. For example
|
||||
Sierra Aria and IBM Mwave. It's possible that these architectures
|
||||
get some support in future but I can't make any promises. Just look
|
||||
at the home page (http://www.opensound.com/ossfree/new_cards.html)
|
||||
at the home page (http://www.opensound.com/ossfree/)
|
||||
for latest info.
|
||||
|
||||
Information about unsupported sound cards and chipsets is welcome as well
|
||||
|
|
@ -1449,7 +1449,6 @@ If you have any corrections and/or comments, please contact me.
|
|||
Hannu Savolainen
|
||||
[email protected]
|
||||
|
||||
Personal home page: http://www.compusonic.fi/~hannu
|
||||
home page of OSS/Free: http://www.opensound.com/ossfree
|
||||
|
||||
home page of commercial OSS
|
||||
|
|
|
|||
Loading…
Reference in a new issue