diff --git a/qcom/milanf-display.dtsi b/qcom/milanf-display.dtsi
index a6e50ea93c63..4a62830c669c 100644
--- a/qcom/milanf-display.dtsi
+++ b/qcom/milanf-display.dtsi
@@ -1,5 +1,6 @@
 #include "dsi-panel-mot-dummy-qhd-video.dtsi"
 #include "dsi-panel-mot-tm-nt36672e-678-1080x2460-video.dtsi"
+#include "dsi-panel-mot-csot-nt36672e-678-1080x2460-video.dtsi"
 
 &display_panel_avdd {
 	/delete-property/ gpio;
@@ -178,6 +179,51 @@
 	};
 };
 
+&dsi_csot_nt36672e_678_fhdp_120_video {
+	qcom,platform-te-gpio = <&tlmm 23 0>;
+	qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;
+
+	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_ext_bias>;
+
+	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_i2c";
+	qcom,mdss-dsi-bl-min-level = <1>;
+	qcom,mdss-dsi-bl-max-level = <2047>;
+	qcom,mdss-dsi-bl-default-level = <1024>;
+	qcom,mdss-brightness-max-level = <2047>;
+
+	qcom,dsi-supported-dfps-list = <120 90 60>;
+	qcom,mdss-dsi-pan-enable-dynamic-fps;
+	qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";
+
+	qcom,esd-check-enabled;
+	qcom,mdss-dsi-panel-status-check-mode = "reg_read";
+	qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
+	qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
+	qcom,mdss-dsi-panel-status-value = <0x9c>;
+	qcom,mdss-dsi-panel-status-read-length = <1>;
+	qcom,mdss-dsi-no-panel-on-read-support;
+	qcom,mdss-dsi-panel-supplier = "csot";
+
+	qcom,tp_state_check_enable;
+
+	qcom,mdss-dsi-hbm-on-command = [39 01 00 00 00 00 02 51 FF];
+	qcom,mdss-dsi-hbm-on-command-state =  "dsi_lp_mode";
+	qcom,mdss-dsi-hbm-off-command = [39 01 00 00 00 00 02 51 CC];
+	qcom,mdss-dsi-hbm-off-command-state =  "dsi_lp_mode";
+	qcom,mdss-dsi-hbm-type = "lcd-dcs-wled";
+
+	qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
+
+	qcom,mdss-dsi-display-timings {
+		timing@0 {
+			qcom,mdss-dsi-panel-clockrate = <900000000>;
+			qcom,mdss-dsi-panel-phy-timings = [00 1A 07 06 22 21 07
+				07 07 02 04 00 1A 0C];
+			qcom,display-topology = <1 1 1>;
+			qcom,default-topology-index = <0>;
+		};
+	};
+};
 
 &qupv3_se10_i2c {
 	status = "ok";