diff --git a/qcom/holi-qrd-pm6125.dtsi b/qcom/holi-qrd-pm6125.dtsi
index 03a022f1203f..3fe6a35823c6 100644
--- a/qcom/holi-qrd-pm6125.dtsi
+++ b/qcom/holi-qrd-pm6125.dtsi
@@ -665,3 +665,65 @@
 		};
 	};
 };
+
+&tlmm {
+	touch_avdd_default: touch_avdd_default {
+		mux {
+			pins = "gpio53";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio53";
+			drive-strength = <8>;
+			bias-disable = <0>;
+			output-high;
+		};
+	};
+};
+
+&soc {
+	touch_avdd: touch_avdd_stub {
+		/*
+		 * Touch eLDO controlled by gpio#53 is always ON.
+		 * Using dummy regulator.
+		 */
+		compatible = "qcom,stub-regulator";
+		regulator-name = "touch_avdd_stub";
+		qcom,hpm-min-load = <10000>;
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <3544000>;
+	};
+};
+
+&qupv3_se8_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "ok";
+	qcom,i2c-touch-active = "focaltech,fts_ts";
+
+	focaltech@38 {
+		compatible = "focaltech,fts_ts";
+		reg = <0x38>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+		focaltech,reset-gpio = <&tlmm 21 0x00>;
+		focaltech,irq-gpio = <&tlmm 22 0x2008>;
+		focaltech,max-touch-number = <5>;
+		focaltech,display-coords = <0 0 1080 2340>;
+
+		vcc_i2c-supply = <&L9A>;
+		vdd-supply = <&touch_avdd>;
+
+		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",
+				"pmx_ts_release";
+		pinctrl-0 = <&ts_active>;
+		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
+		pinctrl-2 = <&pmx_ts_release>;
+
+		panel = <&dsi_r66451_amoled_90hz_cmd
+			 &dsi_r66451_amoled_90hz_video
+			 &dsi_r66451_amoled_cmd &dsi_r66451_amoled_video>;
+	};
+};