diff --git a/qcom/Makefile b/qcom/Makefile
index f0b24c10af42..0e4c4c177b6a 100644
--- a/qcom/Makefile
+++ b/qcom/Makefile
@@ -418,6 +418,7 @@ dtb-$(CONFIG_ARCH_SDXLEMUR) += sdxlemur-rumi.dtb \
 	sdxlemur-mtp-mbb-pcie-ep-ipq.dtb \
 	sdxlemur-mtp-mbb-pcie-rc-ep.dtb \
 	sdxlemur-mtp-mbb-m2-ep.dtb \
+	sdxlemur-mtp-mbb-m2-ep-usb.dtb \
 	sdxlemur-mtp-mbb.dtb \
 	sdxlemur-rcm-pcie-ep.dtb \
 	sdxlemur-rcm-rc.dtb \
diff --git a/qcom/sdxlemur-mtp-mbb-m2-ep-usb.dts b/qcom/sdxlemur-mtp-mbb-m2-ep-usb.dts
new file mode 100644
index 000000000000..1287fb52188f
--- /dev/null
+++ b/qcom/sdxlemur-mtp-mbb-m2-ep-usb.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+
+#include "sdxlemur.dtsi"
+#include "sdxlemur-mtp-mbb-pcie-ep.dtsi"
+#include "sdxlemur-mtp-mbb-m2-ep-usb.dtsi"
+#include "sdxlemur-1024mb.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDXLEMUR MTP MBB M2 EP USB";
+	compatible = "qcom,sdxlemur-mtp",
+		"qcom,sdxlemur", "qcom,mtp";
+	qcom,board-id = <0x10010008 0x310>;
+};
diff --git a/qcom/sdxlemur-mtp-mbb-m2-ep-usb.dtsi b/qcom/sdxlemur-mtp-mbb-m2-ep-usb.dtsi
new file mode 100644
index 000000000000..2970aac94d16
--- /dev/null
+++ b/qcom/sdxlemur-mtp-mbb-m2-ep-usb.dtsi
@@ -0,0 +1,47 @@
+
+&soc {
+
+};
+
+&sdhc_1 {
+	reg = <0x08804000 0x1000>, <0x08805000 0x1000>;
+	reg-names = "hc_mem", "cqhci_mem";
+
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	bus-width = <8>;
+	non-removable;
+	supports-cqe;
+
+	vdd-supply = <&vreg_sd_vdd>;
+	qcom,vdd-voltage-level = <2950000 2950000>;
+	qcom,vdd-current-level = <0 570000>;
+
+	vdd-io-supply = <&L6B>;
+	qcom,vdd-io-always-on;
+	qcom,vdd-io-lpm-sup;
+	qcom,vdd-io-voltage-level = <1800000 1800000>;
+	qcom,vdd-io-current-level = <0 200000>;
+
+	qcom,devfreq,freq-table = <50000000 192000000>;
+	qcom,scaling-lower-bus-speed-mode = "DDR52";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+
+	status = "ok";
+};
+
+&pcie_ep {
+	status = "disabled";
+};
+
+&mhi_device {
+	status = "disabled";
+};
+
+&mhi_net_device {
+	status = "disabled";
+};