From e0e88c25f88b9805572263c9ed20f1d88742feaf Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Sat, 13 Aug 2022 23:34:16 +0300 Subject: [PATCH 001/116] of: fdt: fix off-by-one error in unflatten_dt_nodes() [ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ] Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") forgot to fix up the depth check in the loop body in unflatten_dt_nodes() which makes it possible to overflow the nps[] buffer... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") Signed-off-by: Sergey Shtylyov Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru Signed-off-by: Sasha Levin --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 943d2a60bfdf..6d519ef3c5da 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -315,7 +315,7 @@ static int unflatten_dt_nodes(const void *blob, for (offset = 0; offset >= 0 && depth >= initial_depth; offset = fdt_next_node(blob, offset, &depth)) { - if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH)) + if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH - 1)) continue; if (!IS_ENABLED(CONFIG_OF_KOBJ) && From 82e276e5fcdc8ab4a44d70666e692eeeeefe8da8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 25 Aug 2022 14:49:05 -0400 Subject: [PATCH 002/116] NFSv4: Turn off open-by-filehandle and NFS re-export for NFSv4.0 [ Upstream commit 2a9d683b48c8a87e61a4215792d44c90bcbbb536 ] The NFSv4.0 protocol only supports open() by name. It cannot therefore be used with open_by_handle() and friends, nor can it be re-exported by knfsd. Reported-by: Chuck Lever III Fixes: 20fa19027286 ("nfs: add export operations") Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin --- fs/nfs/super.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index a84df7d63403..ecc7277b3eda 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2375,22 +2375,31 @@ void nfs_fill_super(struct super_block *sb, struct nfs_mount_info *mount_info) if (data && data->bsize) sb->s_blocksize = nfs_block_size(data->bsize, &sb->s_blocksize_bits); - if (server->nfs_client->rpc_ops->version != 2) { - /* The VFS shouldn't apply the umask to mode bits. We will do - * so ourselves when necessary. + switch (server->nfs_client->rpc_ops->version) { + case 2: + sb->s_time_gran = 1000; + sb->s_time_min = 0; + sb->s_time_max = U32_MAX; + break; + case 3: + /* + * The VFS shouldn't apply the umask to mode bits. + * We will do so ourselves when necessary. */ sb->s_flags |= SB_POSIXACL; sb->s_time_gran = 1; - sb->s_export_op = &nfs_export_ops; - } else - sb->s_time_gran = 1000; - - if (server->nfs_client->rpc_ops->version != 4) { sb->s_time_min = 0; sb->s_time_max = U32_MAX; - } else { + sb->s_export_op = &nfs_export_ops; + break; + case 4: + sb->s_flags |= SB_POSIXACL; + sb->s_time_gran = 1; sb->s_time_min = S64_MIN; sb->s_time_max = S64_MAX; + if (server->caps & NFS_CAP_ATOMIC_OPEN_V1) + sb->s_export_op = &nfs_export_ops; + break; } nfs_initialise_sb(sb); From f1de50e1db99421f3abe25eab2c9dd4d9e989d69 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 6 Sep 2022 12:54:31 +0200 Subject: [PATCH 003/116] gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ] Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio"). Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work: [ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8) [ 15.267168] lm90 0-004c: cannot request IRQ 49 [ 15.272708] lm90: probe of 0-004c failed with error -22 Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio") Signed-off-by: Pali Rohár Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin --- drivers/gpio/gpio-mpc8xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index d72a3a5507b0..f3bf82efea8e 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -190,6 +190,7 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) switch (flow_type) { case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR, gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR) From 5dd9cb66b71235ddb369e377b7c703e9afc0583d Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Thu, 8 Sep 2022 16:51:03 +0100 Subject: [PATCH 004/116] drm/meson: Correct OSD1 global alpha value [ Upstream commit 6836829c8ea453c9e3e518e61539e35881c8ed5f ] VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum value is 0x100 not 0xff. This matches the vendor kernel. Signed-off-by: Stuart Menefy Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20220908155103.686904-1-stuart.menefy@mathembedded.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/meson/meson_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c index ed543227b00d..53f5d0581c35 100644 --- a/drivers/gpu/drm/meson/meson_plane.c +++ b/drivers/gpu/drm/meson/meson_plane.c @@ -128,7 +128,7 @@ static void meson_plane_atomic_update(struct drm_plane *plane, /* Enable OSD and BLK0, set max global alpha */ priv->viu.osd1_ctrl_stat = OSD_ENABLE | - (0xFF << OSD_GLOBAL_ALPHA_SHIFT) | + (0x100 << OSD_GLOBAL_ALPHA_SHIFT) | OSD_BLK0_ENABLE; canvas_id_osd1 = priv->canvas_id_osd1; From 2aae9b7d0723ae26a60739645c41c4f4a3d263df Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Thu, 8 Sep 2022 16:52:43 +0100 Subject: [PATCH 005/116] drm/meson: Fix OSD1 RGB to YCbCr coefficient [ Upstream commit 6463d3930ba5b6addcfc8f80a4543976a2fc7656 ] VPP_WRAP_OSD1_MATRIX_COEF22.Coeff22 is documented as being bits 0-12, not 16-28. Without this the output tends to have a pink hue, changing it results in better color accuracy. The vendor kernel doesn't use this register. However the code which sets VIU2_OSD1_MATRIX_COEF22 also uses bits 0-12. There is a slightly different style of registers for configuring some of the other matrices, which do use bits 16-28 for this coefficient, but those have names ending in MATRIX_COEF22_30, and this is not one of those. Signed-off-by: Stuart Menefy Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup") Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20220908155243.687143-1-stuart.menefy@mathembedded.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/meson/meson_viu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c index 9991f0a43b1a..8d0938525978 100644 --- a/drivers/gpu/drm/meson/meson_viu.c +++ b/drivers/gpu/drm/meson/meson_viu.c @@ -91,7 +91,7 @@ static void meson_viu_set_g12a_osd1_matrix(struct meson_drm *priv, priv->io_base + _REG(VPP_WRAP_OSD1_MATRIX_COEF11_12)); writel(((m[9] & 0x1fff) << 16) | (m[10] & 0x1fff), priv->io_base + _REG(VPP_WRAP_OSD1_MATRIX_COEF20_21)); - writel((m[11] & 0x1fff) << 16, + writel((m[11] & 0x1fff), priv->io_base + _REG(VPP_WRAP_OSD1_MATRIX_COEF22)); writel(((m[18] & 0xfff) << 16) | (m[19] & 0xfff), From 47d7e6af5bd487025c4ce7b59d00b310de1f70ec Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 24 Aug 2022 17:36:57 +0800 Subject: [PATCH 006/116] parisc: ccio-dma: Add missing iounmap in error path in ccio_probe() [ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ] Add missing iounmap() before return from ccio_probe(), if ccio_init_resources() fails. Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()") Signed-off-by: Yang Yingliang Signed-off-by: Helge Deller Signed-off-by: Sasha Levin --- drivers/parisc/ccio-dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 6209d58e9492..fdd302d0a1c9 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1544,6 +1544,7 @@ static int __init ccio_probe(struct parisc_device *dev) } ccio_ioc_init(ioc); if (ccio_init_resources(ioc)) { + iounmap(ioc->ioc_regs); kfree(ioc); return -ENOMEM; } From 4051324a6dafd7053c74c475e80b3ba10ae672b0 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Mon, 19 Sep 2022 08:07:54 -0400 Subject: [PATCH 007/116] ALSA: pcm: oss: Fix race at SNDCTL_DSP_SYNC [ Upstream commit 8423f0b6d513b259fdab9c9bf4aaa6188d054c2d ] There is a small race window at snd_pcm_oss_sync() that is called from OSS PCM SNDCTL_DSP_SYNC ioctl; namely the function calls snd_pcm_oss_make_ready() at first, then takes the params_lock mutex for the rest. When the stream is set up again by another thread between them, it leads to inconsistency, and may result in unexpected results such as NULL dereference of OSS buffer as a fuzzer spotted recently. The fix is simply to cover snd_pcm_oss_make_ready() call into the same params_lock mutex with snd_pcm_oss_make_ready_locked() variant. Reported-and-tested-by: butt3rflyh4ck Reviewed-by: Jaroslav Kysela Cc: Link: https://lore.kernel.org/r/CAFcO6XN7JDM4xSXGhtusQfS2mSBcx50VJKwQpCq=WeLt57aaZA@mail.gmail.com Link: https://lore.kernel.org/r/20220905060714.22549-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/core/oss/pcm_oss.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index ad4e0af2d0d0..51d2911366e9 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -1661,13 +1661,14 @@ static int snd_pcm_oss_sync(struct snd_pcm_oss_file *pcm_oss_file) runtime = substream->runtime; if (atomic_read(&substream->mmap_count)) goto __direct; - if ((err = snd_pcm_oss_make_ready(substream)) < 0) - return err; atomic_inc(&runtime->oss.rw_ref); if (mutex_lock_interruptible(&runtime->oss.params_lock)) { atomic_dec(&runtime->oss.rw_ref); return -ERESTARTSYS; } + err = snd_pcm_oss_make_ready_locked(substream); + if (err < 0) + goto unlock; format = snd_pcm_oss_format_from(runtime->oss.format); width = snd_pcm_format_physical_width(format); if (runtime->oss.buffer_used > 0) { From 2c4e260d45fd598e55214e8ea4520968275ebadd Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 23 Mar 2022 20:02:41 +0100 Subject: [PATCH 008/116] task_stack, x86/cea: Force-inline stack helpers [ Upstream commit e87f4152e542610d0b4c6c8548964a68a59d2040 ] Force-inline two stack helpers to fix the following objtool warnings: vmlinux.o: warning: objtool: in_task_stack()+0xc: call to task_stack_page() leaves .noinstr.text section vmlinux.o: warning: objtool: in_entry_stack()+0x10: call to cpu_entry_stack() leaves .noinstr.text section Signed-off-by: Borislav Petkov Acked-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/20220324183607.31717-2-bp@alien8.de Stable-dep-of: 54c3931957f6 ("tracing: hold caller_addr to hardirq_{enable,disable}_ip") Signed-off-by: Sasha Levin --- arch/x86/include/asm/cpu_entry_area.h | 2 +- include/linux/sched/task_stack.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/cpu_entry_area.h b/arch/x86/include/asm/cpu_entry_area.h index ea866c7bf31d..0d1d37d8b279 100644 --- a/arch/x86/include/asm/cpu_entry_area.h +++ b/arch/x86/include/asm/cpu_entry_area.h @@ -133,7 +133,7 @@ extern void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags); extern struct cpu_entry_area *get_cpu_entry_area(int cpu); -static inline struct entry_stack *cpu_entry_stack(int cpu) +static __always_inline struct entry_stack *cpu_entry_stack(int cpu) { return &get_cpu_entry_area(cpu)->entry_stack_page.stack; } diff --git a/include/linux/sched/task_stack.h b/include/linux/sched/task_stack.h index d10150587d81..1009b6b5ce40 100644 --- a/include/linux/sched/task_stack.h +++ b/include/linux/sched/task_stack.h @@ -16,7 +16,7 @@ * try_get_task_stack() instead. task_stack_page will return a pointer * that could get freed out from under you. */ -static inline void *task_stack_page(const struct task_struct *task) +static __always_inline void *task_stack_page(const struct task_struct *task) { return task->stack; } From 834f4d856fdae5c71dbba8c9e7973315b879e691 Mon Sep 17 00:00:00 2001 From: Yipeng Zou Date: Thu, 1 Sep 2022 18:45:14 +0800 Subject: [PATCH 009/116] tracing: hold caller_addr to hardirq_{enable,disable}_ip [ Upstream commit 54c3931957f6a6194d5972eccc36d052964b2abe ] Currently, The arguments passing to lockdep_hardirqs_{on,off} was fixed in CALLER_ADDR0. The function trace_hardirqs_on_caller should have been intended to use caller_addr to represent the address that caller wants to be traced. For example, lockdep log in riscv showing the last {enabled,disabled} at __trace_hardirqs_{on,off} all the time(if called by): [ 57.853175] hardirqs last enabled at (2519): __trace_hardirqs_on+0xc/0x14 [ 57.853848] hardirqs last disabled at (2520): __trace_hardirqs_off+0xc/0x14 After use trace_hardirqs_xx_caller, we can get more effective information: [ 53.781428] hardirqs last enabled at (2595): restore_all+0xe/0x66 [ 53.782185] hardirqs last disabled at (2596): ret_from_exception+0xa/0x10 Link: https://lkml.kernel.org/r/20220901104515.135162-2-zouyipeng@huawei.com Cc: stable@vger.kernel.org Fixes: c3bc8fd637a96 ("tracing: Centralize preemptirq tracepoints and unify their usage") Signed-off-by: Yipeng Zou Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin --- kernel/trace/trace_preemptirq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_preemptirq.c b/kernel/trace/trace_preemptirq.c index 26b06b09c9f6..e9645f829b94 100644 --- a/kernel/trace/trace_preemptirq.c +++ b/kernel/trace/trace_preemptirq.c @@ -56,14 +56,14 @@ __visible void trace_hardirqs_on_caller(unsigned long caller_addr) this_cpu_write(tracing_irq_cpu, 0); } - lockdep_hardirqs_on(CALLER_ADDR0); + lockdep_hardirqs_on(caller_addr); } EXPORT_SYMBOL(trace_hardirqs_on_caller); NOKPROBE_SYMBOL(trace_hardirqs_on_caller); __visible void trace_hardirqs_off_caller(unsigned long caller_addr) { - lockdep_hardirqs_off(CALLER_ADDR0); + lockdep_hardirqs_off(caller_addr); if (!this_cpu_read(tracing_irq_cpu)) { this_cpu_write(tracing_irq_cpu, 1); From 81081a5c9c74c781357b4f8cb2028756f23020da Mon Sep 17 00:00:00 2001 From: Ronnie Sahlberg Date: Mon, 12 Sep 2022 13:04:46 +1000 Subject: [PATCH 010/116] cifs: revalidate mapping when doing direct writes commit 7500a99281dfed2d4a84771c933bcb9e17af279b upstream. Kernel bugzilla: 216301 When doing direct writes we need to also invalidate the mapping in case we have a cached copy of the affected page(s) in memory or else subsequent reads of the data might return the old/stale content before we wrote an update to the server. Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Ronnie Sahlberg Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman --- fs/cifs/file.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 03c85beecec1..eb61cecf42d6 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3194,6 +3194,9 @@ static ssize_t __cifs_writev( ssize_t cifs_direct_writev(struct kiocb *iocb, struct iov_iter *from) { + struct file *file = iocb->ki_filp; + + cifs_revalidate_mapping(file->f_inode); return __cifs_writev(iocb, from, true); } From 36128fd71f03e697690ef1853e374d8373067a1b Mon Sep 17 00:00:00 2001 From: Stefan Metzmacher Date: Wed, 14 Sep 2022 05:25:46 +0200 Subject: [PATCH 011/116] cifs: don't send down the destination address to sendmsg for a SOCK_STREAM commit 17d3df38dc5f4cec9b0ac6eb79c1859b6e2693a4 upstream. This is ignored anyway by the tcp layer. Signed-off-by: Stefan Metzmacher Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman --- fs/cifs/transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 61e7df4d9cb1..079a4f6162ed 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -209,8 +209,8 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, *sent = 0; - smb_msg->msg_name = (struct sockaddr *) &server->dstaddr; - smb_msg->msg_namelen = sizeof(struct sockaddr); + smb_msg->msg_name = NULL; + smb_msg->msg_namelen = 0; smb_msg->msg_control = NULL; smb_msg->msg_controllen = 0; if (server->noblocksnd) From d88039e6fee48899edfa0193333eea4b6b85210c Mon Sep 17 00:00:00 2001 From: Chandan Babu R Date: Wed, 21 Sep 2022 08:53:36 +0530 Subject: [PATCH 012/116] MAINTAINERS: add Chandan as xfs maintainer for 5.4.y This is an attempt to direct the bots and humans that are testing LTS 5.4.y towards the maintainer of xfs in the 5.4.y tree. Update Darrick's email address from upstream and add Chandan as xfs maintaier for the 5.4.y tree. Suggested-by: Darrick J. Wong Link: https://lore.kernel.org/linux-xfs/Yrx6%2F0UmYyuBPjEr@magnolia/ Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index f45d6548a4aa..973fcc9143d1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17864,7 +17864,8 @@ S: Supported F: sound/xen/* XFS FILESYSTEM -M: Darrick J. Wong +M: Chandan Babu R +M: Darrick J. Wong M: linux-xfs@vger.kernel.org L: linux-xfs@vger.kernel.org W: http://xfs.org/ From 323f289a9044fd92af7ff2068e22a2f8227471ea Mon Sep 17 00:00:00 2001 From: Chandan Babu R Date: Wed, 21 Sep 2022 08:53:37 +0530 Subject: [PATCH 013/116] iomap: iomap that extends beyond EOF should be marked dirty From: Dave Chinner commit 7684e2c4384d5d1f884b01ab8bff2369e4db0bff upstream. When doing a direct IO that spans the current EOF, and there are written blocks beyond EOF that extend beyond the current write, the only metadata update that needs to be done is a file size extension. However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that there is IO completion metadata updates required, and hence we may fail to correctly sync file size extensions made in IO completion when O_DSYNC writes are being used and the hardware supports FUA. Hence when setting IOMAP_F_DIRTY, we need to also take into account whether the iomap spans the current EOF. If it does, then we need to mark it dirty so that IO completion will call generic_write_sync() to flush the inode size update to stable storage correctly. Fixes: 3460cac1ca76 ("iomap: Use FUA for pure data O_DSYNC DIO writes") Signed-off-by: Dave Chinner Signed-off-by: Christoph Hellwig Reviewed-by: Darrick J. Wong [darrick: removed the ext4 part; they'll handle it separately] Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_iomap.c | 7 +++++++ include/linux/iomap.h | 2 ++ 2 files changed, 9 insertions(+) diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 239c9548b156..26cf811f3d96 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -1055,6 +1055,13 @@ xfs_file_iomap_begin( trace_xfs_iomap_alloc(ip, offset, length, XFS_DATA_FORK, &imap); out_finish: + /* + * Writes that span EOF might trigger an IO size update on completion, + * so consider them to be dirty for the purposes of O_DSYNC even if + * there is no other metadata changes pending or have been made here. + */ + if ((flags & IOMAP_WRITE) && offset + length > i_size_read(inode)) + iomap->flags |= IOMAP_F_DIRTY; return xfs_bmbt_to_iomap(ip, iomap, &imap, shared); out_found: diff --git a/include/linux/iomap.h b/include/linux/iomap.h index 53b16f104081..74e05e7b67f5 100644 --- a/include/linux/iomap.h +++ b/include/linux/iomap.h @@ -32,6 +32,8 @@ struct vm_fault; * * IOMAP_F_DIRTY indicates the inode has uncommitted metadata needed to access * written data and requires fdatasync to commit them to persistent storage. + * This needs to take into account metadata changes that *may* be made at IO + * completion, such as file size updates from direct IO. */ #define IOMAP_F_NEW 0x01 /* blocks have been newly allocated */ #define IOMAP_F_DIRTY 0x02 /* uncommitted metadata */ From 17a21341d953f311d8dc473cb533abf62c0bc75f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Aug 2022 10:09:57 +0200 Subject: [PATCH 014/116] ASoC: nau8824: Fix semaphore unbalance at error paths [ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ] The semaphore of nau8824 wasn't properly unlocked at some error handling code paths, hence this may result in the unbalance (and potential lock-up). Fix them to handle the semaphore up properly. Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/nau8824.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index c8ccfa2fff84..a95fe3fff1db 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -1072,6 +1072,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component); unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div; + int err = -EINVAL; nau8824_sema_acquire(nau8824, HZ); @@ -1088,7 +1089,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_DAC_OVERSAMPLE_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_DAC_SRC_MASK, osr_dac_sel[osr].clk_src << NAU8824_CLK_DAC_SRC_SFT); @@ -1098,7 +1099,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_ADC_SYNC_DOWN_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_ADC_SRC_MASK, osr_adc_sel[osr].clk_src << NAU8824_CLK_ADC_SRC_SFT); @@ -1119,7 +1120,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, else if (bclk_fs <= 256) bclk_div = 0; else - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_2, NAU8824_I2S_LRC_DIV_MASK | NAU8824_I2S_BLK_DIV_MASK, @@ -1140,15 +1141,17 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, val_len |= NAU8824_I2S_DL_32; break; default: - return -EINVAL; + goto error; } regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DL_MASK, val_len); + err = 0; + error: nau8824_sema_release(nau8824); - return 0; + return err; } static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) @@ -1157,8 +1160,6 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component); unsigned int ctrl1_val = 0, ctrl2_val = 0; - nau8824_sema_acquire(nau8824, HZ); - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8824_I2S_MS_MASTER; @@ -1200,6 +1201,8 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; } + nau8824_sema_acquire(nau8824, HZ); + regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DF_MASK | NAU8824_I2S_BP_MASK | NAU8824_I2S_PCMB_EN, ctrl1_val); From da01ec04a0b0d9ee2fb28ce16ea939fecc0ab67c Mon Sep 17 00:00:00 2001 From: Xiaolei Wang Date: Thu, 25 Aug 2022 19:19:22 +0800 Subject: [PATCH 015/116] regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe() [ Upstream commit 78e1e867f44e6bdc72c0e6a2609a3407642fb30b ] The pfuze_chip::regulator_descs is an array of size PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators is the pointer to the real regulators of a specific device. The number of real regulator is supposed to be less than the PFUZE100_MAX_REGULATOR, so we should use the size of 'regulator_num * sizeof(struct pfuze_regulator)' in memcpy(). This fixes the out of bounds access bug reported by KASAN. Signed-off-by: Xiaolei Wang Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/pfuze100-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index f873d97100e2..13609942d45c 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -788,7 +788,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001")))); memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, - sizeof(pfuze_chip->regulator_descs)); + regulator_num * sizeof(struct pfuze_regulator)); ret = pfuze_parse_regulators_dt(pfuze_chip); if (ret) From cc273ed79e7c29634aaa49f6eba2093b3ba2f2d9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 6 May 2022 23:55:21 +0100 Subject: [PATCH 016/116] rxrpc: Fix local destruction being repeated [ Upstream commit d3d863036d688313f8d566b87acd7d99daf82749 ] If the local processor work item for the rxrpc local endpoint gets requeued by an event (such as an incoming packet) between it getting scheduled for destruction and the UDP socket being closed, the rxrpc_local_destroyer() function can get run twice. The second time it can hang because it can end up waiting for cleanup events that will never happen. Signed-off-by: David Howells Signed-off-by: Sasha Levin --- net/rxrpc/local_object.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/rxrpc/local_object.c b/net/rxrpc/local_object.c index 01135e54d95d..fc784fcc3a94 100644 --- a/net/rxrpc/local_object.c +++ b/net/rxrpc/local_object.c @@ -448,6 +448,9 @@ static void rxrpc_local_processor(struct work_struct *work) container_of(work, struct rxrpc_local, processor); bool again; + if (local->dead) + return; + trace_rxrpc_local(local->debug_id, rxrpc_local_processing, atomic_read(&local->usage), NULL); From 39265647c4a602201f04914af4bdbdd1c5d29dbf Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 5 Apr 2022 13:34:09 +0100 Subject: [PATCH 017/116] rxrpc: Fix calc of resend age [ Upstream commit 214a9dc7d852216e83acac7b75bc18f01ce184c2 ] Fix the calculation of the resend age to add a microsecond value as microseconds, not nanoseconds. Signed-off-by: David Howells Signed-off-by: Sasha Levin --- net/rxrpc/call_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index 8574e7066d94..b5f173960725 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -166,7 +166,7 @@ static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j) _enter("{%d,%d}", call->tx_hard_ack, call->tx_top); now = ktime_get_real(); - max_age = ktime_sub(now, jiffies_to_usecs(call->peer->rto_j)); + max_age = ktime_sub_us(now, jiffies_to_usecs(call->peer->rto_j)); spin_lock_bh(&call->lock); From 9f55da12d05db9bc26605e946e764e1f5a5a8b10 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 4 Sep 2022 09:27:50 +0200 Subject: [PATCH 018/116] ALSA: hda/sigmatel: Keep power up while beep is enabled [ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ] It seems that the beep playback doesn't work well on IDT codec devices when the codec auto-pm is enabled. Keep the power on while the beep switch is enabled. Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544 Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_sigmatel.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index bfd3fe5eff31..7a8ecc21b347 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -209,6 +209,7 @@ struct sigmatel_spec { /* beep widgets */ hda_nid_t anabeep_nid; + bool beep_power_on; /* SPDIF-out mux */ const char * const *spdif_labels; @@ -4441,6 +4442,26 @@ static int stac_suspend(struct hda_codec *codec) stac_shutup(codec); return 0; } + +static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) +{ + struct sigmatel_spec *spec = codec->spec; + int ret = snd_hda_gen_check_power_status(codec, nid); + +#ifdef CONFIG_SND_HDA_INPUT_BEEP + if (nid == spec->gen.beep_nid && codec->beep) { + if (codec->beep->enabled != spec->beep_power_on) { + spec->beep_power_on = codec->beep->enabled; + if (spec->beep_power_on) + snd_hda_power_up_pm(codec); + else + snd_hda_power_down_pm(codec); + } + ret |= spec->beep_power_on; + } +#endif + return ret; +} #else #define stac_suspend NULL #endif /* CONFIG_PM */ @@ -4453,6 +4474,7 @@ static const struct hda_codec_ops stac_patch_ops = { .unsol_event = snd_hda_jack_unsol_event, #ifdef CONFIG_PM .suspend = stac_suspend, + .check_power_status = stac_check_power_status, #endif .reboot_notify = stac_shutup, }; From 447f95d413973f14f84e80a8c836121b27f5a73e Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Mon, 5 Sep 2022 22:54:20 +0530 Subject: [PATCH 019/116] ALSA: hda/tegra: Align BDL entry to 4KB boundary [ Upstream commit 8d44e6044a0e885acdd01813768a0b27906d64fd ] AZA HW may send a burst read/write request crossing 4K memory boundary. The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K boundary. Signed-off-by: Mohan Kumar Link: https://lore.kernel.org/r/20220905172420.3801-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/hda_tegra.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index 2971b34c87c1..e235c3ec634d 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -428,7 +428,8 @@ MODULE_DEVICE_TABLE(of, hda_tegra_match); static int hda_tegra_probe(struct platform_device *pdev) { const unsigned int driver_flags = AZX_DCAPS_CORBRP_SELF_CLEAR | - AZX_DCAPS_PM_RUNTIME; + AZX_DCAPS_PM_RUNTIME | + AZX_DCAPS_4K_BDLE_BOUNDARY; struct snd_card *card; struct azx *chip; struct hda_tegra *hda; From 1aea20f98ed32bba3cefea937d9605a4f2651ff5 Mon Sep 17 00:00:00 2001 From: "jerry.meng" Date: Mon, 5 Sep 2022 09:24:52 +0800 Subject: [PATCH 020/116] net: usb: qmi_wwan: add Quectel RM520N MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ] add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 8ef0a013874c..cee90e505d17 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1046,6 +1046,7 @@ static const struct usb_device_id products[] = { {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)}, /* Quectel EM160R-GL */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)}, /* Quectel RM520N */ /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ From c53c3cbca5efd93265a06a637dd600b1cef752e1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 6 Sep 2022 22:09:11 +0100 Subject: [PATCH 021/116] afs: Return -EAGAIN, not -EREMOTEIO, when a file already locked [ Upstream commit 0066f1b0e27556381402db3ff31f85d2a2265858 ] When trying to get a file lock on an AFS file, the server may return UAEAGAIN to indicate that the lock is already held. This is currently translated by the default path to -EREMOTEIO. Translate it instead to -EAGAIN so that we know we can retry it. Signed-off-by: David Howells Reviewed-by: Jeffrey E Altman cc: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- fs/afs/misc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/afs/misc.c b/fs/afs/misc.c index 5334f1bd2bca..5171d6d99031 100644 --- a/fs/afs/misc.c +++ b/fs/afs/misc.c @@ -69,6 +69,7 @@ int afs_abort_to_error(u32 abort_code) /* Unified AFS error table */ case UAEPERM: return -EPERM; case UAENOENT: return -ENOENT; + case UAEAGAIN: return -EAGAIN; case UAEACCES: return -EACCES; case UAEBUSY: return -EBUSY; case UAEEXIST: return -EEXIST; From f0ebdfc10bd1bb4f461949485510cb255478cbdb Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Tue, 6 Sep 2022 11:59:43 +0200 Subject: [PATCH 022/116] MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping() [ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ] For irq_domain_associate() to work the virq descriptor has to be pre-allocated in advance. Otherwise the following happens: WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8 error: virq128 is not allocated Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1 ... Call Trace: [] show_stack+0x9c/0x130 [] dump_stack+0x90/0xd0 [] __warn+0x118/0x130 [] warn_slowpath_fmt+0x4c/0x70 [] irq_domain_associate+0x298/0x2e8 [] octeon_irq_init_ciu+0x4c8/0x53c [] of_irq_init+0x1e0/0x388 [] init_IRQ+0x4c/0xf4 [] start_kernel+0x404/0x698 Use irq_alloc_desc_at() to avoid the above problem. Signed-off-by: Alexander Sverdlin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/cavium-octeon/octeon-irq.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 3ad1f76c063a..2d5e7b21d960 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -127,6 +127,16 @@ static void octeon_irq_free_cd(struct irq_domain *d, unsigned int irq) static int octeon_irq_force_ciu_mapping(struct irq_domain *domain, int irq, int line, int bit) { + struct device_node *of_node; + int ret; + + of_node = irq_domain_get_of_node(domain); + if (!of_node) + return -EINVAL; + ret = irq_alloc_desc_at(irq, of_node_to_nid(of_node)); + if (ret < 0) + return ret; + return irq_domain_associate(domain, irq, line << 6 | bit); } From 47c5ef29e52f5ee773f45a6b37a03b69f4f9a52a Mon Sep 17 00:00:00 2001 From: Youling Tang Date: Thu, 1 Sep 2022 19:10:59 +0800 Subject: [PATCH 023/116] mksysmap: Fix the mismatch of 'L0' symbols in System.map [ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, we need to filter "L0" symbols in LoongArch architecture. $ cat System.map | grep L0 9000000000221540 t L0 The L0 symbol exists in System.map, but not in .tmp_System.map. When "cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms data" error message in link-vmlinux.sh script. Signed-off-by: Youling Tang Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin --- scripts/mksysmap | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mksysmap b/scripts/mksysmap index 9aa23d15862a..ad8bbc52267d 100755 --- a/scripts/mksysmap +++ b/scripts/mksysmap @@ -41,4 +41,4 @@ # so we just ignore them to let readprofile continue to work. # (At least sparc64 has __crc_ in the middle). -$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)' > $2 +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)\|\( L0\)' > $2 From 1878eaf0edb8c9e58a6ca0cf31b7a647ca346be9 Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Mon, 20 Jun 2022 07:17:46 -0700 Subject: [PATCH 024/116] video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write [ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ] In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user(). Signed-off-by: Hyunwoo Kim Signed-off-by: Helge Deller Signed-off-by: Sasha Levin --- drivers/video/fbdev/pxa3xx-gcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c index 7c4694d70dac..15162b37f302 100644 --- a/drivers/video/fbdev/pxa3xx-gcu.c +++ b/drivers/video/fbdev/pxa3xx-gcu.c @@ -382,7 +382,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff, struct pxa3xx_gcu_batch *buffer; struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file); - int words = count / 4; + size_t words = count / 4; /* Does not need to be atomic. There's a lock in user space, * but anyhow, this is just for statistics. */ From 07191f984842d50020789ff14c75da436a7f46a9 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 25 Aug 2022 17:38:38 +0900 Subject: [PATCH 025/116] cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all() commit 43626dade36fa74d3329046f4ae2d7fdefe401c6 upstream. syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that cpuset_attach() is also called from cgroup_attach_task_all(). Add cpus_read_lock() like what cgroup_procs_write_start() does. Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1] Reported-by: syzbot Signed-off-by: Tetsuo Handa Fixes: 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- kernel/cgroup/cgroup-v1.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c index aa7577b189e9..9e847e71cedd 100644 --- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -15,6 +15,7 @@ #include #include #include +#include #include @@ -62,6 +63,7 @@ int cgroup_attach_task_all(struct task_struct *from, struct task_struct *tsk) int retval = 0; mutex_lock(&cgroup_mutex); + cpus_read_lock(); percpu_down_write(&cgroup_threadgroup_rwsem); for_each_root(root) { struct cgroup *from_cgrp; @@ -78,6 +80,7 @@ int cgroup_attach_task_all(struct task_struct *from, struct task_struct *tsk) break; } percpu_up_write(&cgroup_threadgroup_rwsem); + cpus_read_unlock(); mutex_unlock(&cgroup_mutex); return retval; From 85371aad2855a36bcc5ad96aaf326b4f0263e6af Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 5 Sep 2022 15:06:30 +0200 Subject: [PATCH 026/116] ALSA: hda/sigmatel: Fix unused variable warning for beep power change commit 51bdc8bb82525cd70feb92279c8b7660ad7948dd upstream. The newly added stac_check_power_status() caused a compile warning when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it. Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled") Reported-by: kernel test robot Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 7a8ecc21b347..04a89171327d 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4445,7 +4445,9 @@ static int stac_suspend(struct hda_codec *codec) static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) { +#ifdef CONFIG_SND_HDA_INPUT_BEEP struct sigmatel_spec *spec = codec->spec; +#endif int ret = snd_hda_gen_check_power_status(codec, nid); #ifdef CONFIG_SND_HDA_INPUT_BEEP From e24f90d7617b908b42c41fafd7d4599e1b4970d3 Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Thu, 16 Sep 2021 19:18:52 -0700 Subject: [PATCH 027/116] usb: dwc3: gadget: Avoid starting DWC3 gadget during UDC unbind [ Upstream commit 8217f07a50236779880f13e87f99224cd9117f83 ] There is a race present where the DWC3 runtime resume runs in parallel to the UDC unbind sequence. This will eventually lead to a possible scenario where we are enabling the run/stop bit, without a valid composition defined. Thread#1 (handling UDC unbind): usb_gadget_remove_driver() -->usb_gadget_disconnect() -->dwc3_gadget_pullup(0) --> continue UDC unbind sequence -->Thread#2 is running in parallel here Thread#2 (handing next cable connect) __dwc3_set_mode() -->pm_runtime_get_sync() -->dwc3_gadget_resume() -->dwc->gadget_driver is NOT NULL yet -->dwc3_gadget_run_stop(1) --> _dwc3gadget_start() ... Fix this by tracking the pullup disable routine, and avoiding resuming of the DWC3 gadget. Once the UDC is re-binded, that will trigger the pullup enable routine, which would handle enabling the DWC3 gadget. Acked-by: Felipe Balbi Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/20210917021852.2037-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/gadget.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index da296f888f45..a93c61bc5a7d 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -994,6 +994,7 @@ struct dwc3_scratchpad_array { * @tx_max_burst_prd: max periodic ESS transmit burst size * @hsphy_interface: "utmi" or "ulpi" * @connected: true when we're connected to a host, false otherwise + * @softconnect: true when gadget connect is called, false when disconnect runs * @delayed_status: true when gadget driver asks for delayed status * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer @@ -1196,6 +1197,7 @@ struct dwc3 { const char *hsphy_interface; unsigned connected:1; + unsigned softconnect:1; unsigned delayed_status:1; unsigned ep0_bounced:1; unsigned ep0_expect_in:1; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 80fee7ea83ca..079919b85d87 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2015,7 +2015,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) int ret; is_on = !!is_on; - + dwc->softconnect = is_on; /* * Per databook, when we want to stop the gadget, if a control transfer * is still in process, complete it and get the core into setup phase. @@ -3791,7 +3791,7 @@ int dwc3_gadget_resume(struct dwc3 *dwc) { int ret; - if (!dwc->gadget_driver) + if (!dwc->gadget_driver || !dwc->softconnect) return 0; ret = __dwc3_gadget_start(dwc); From 62b6cbc5983ee2689234cf231587aa5cda7eb94f Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Tue, 15 Mar 2022 18:13:58 -0700 Subject: [PATCH 028/116] usb: dwc3: Issue core soft reset before enabling run/stop [ Upstream commit 0066472de157439d58454f4a55786f1045ea5681 ] It is recommended by the Synopsis databook to issue a DCTL.CSftReset when reconnecting from a device-initiated disconnect routine. This resolves issues with enumeration during fast composition switching cases, which result in an unknown device on the host. Reviewed-by: Thinh Nguyen Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/20220316011358.3057-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/core.c | 2 +- drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/gadget.c | 11 +++++++++++ 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f4655665a1b5..a9c49b2ce511 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -227,7 +227,7 @@ u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type) * dwc3_core_soft_reset - Issues core soft reset and PHY reset * @dwc: pointer to our context structure */ -static int dwc3_core_soft_reset(struct dwc3 *dwc) +int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; int retries = 1000; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index a93c61bc5a7d..f320b989abd2 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1422,6 +1422,8 @@ bool dwc3_has_imod(struct dwc3 *dwc); int dwc3_event_buffers_setup(struct dwc3 *dwc); void dwc3_event_buffers_cleanup(struct dwc3 *dwc); +int dwc3_core_soft_reset(struct dwc3 *dwc); + #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); void dwc3_host_exit(struct dwc3 *dwc); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 079919b85d87..b95fc2ae8074 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2088,6 +2088,17 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) dwc->ev_buf->length; } } else { + /* + * In the Synopsys DWC_usb31 1.90a programming guide section + * 4.1.9, it specifies that for a reconnect after a + * device-initiated disconnect requires a core soft reset + * (DCTL.CSftRst) before enabling the run/stop bit. + */ + spin_unlock_irqrestore(&dwc->lock, flags); + dwc3_core_soft_reset(dwc); + spin_lock_irqsave(&dwc->lock, flags); + + dwc3_event_buffers_setup(dwc); __dwc3_gadget_start(dwc); } From 24e4f6308d956b5629f3999b49c40df492f75cbb Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Thu, 21 Apr 2022 19:22:31 -0700 Subject: [PATCH 029/116] usb: dwc3: gadget: Prevent repeat pullup() [ Upstream commit 69e131d1ac4e52a59ec181ab4f8aa8c48cd8fb64 ] Don't do soft-disconnect if it's previously done. Likewise, don't do soft-connect if the device is currently connected and running. It would break normal operation. Currently the caller of pullup() (udc's sysfs soft_connect) only checks if it had initiated disconnect to prevent repeating soft-disconnect. It doesn't check for soft-connect. To be safe, let's keep the check here regardless whether the udc core is fixed. Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/1c1345bd66c97a9d32f77d63aaadd04b7b037143.1650593829.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/gadget.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index b95fc2ae8074..ea56f4fb234e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2015,6 +2015,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) int ret; is_on = !!is_on; + + if (dwc->pullups_connected == is_on) + return 0; + dwc->softconnect = is_on; /* * Per databook, when we want to stop the gadget, if a control transfer From 67bf926f16b342d73a783d75d26172eefd7c06f4 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Thu, 21 Apr 2022 19:22:38 -0700 Subject: [PATCH 030/116] usb: dwc3: gadget: Refactor pullup() [ Upstream commit 861c010a2ee1bc4a66d23f0da4aa22e75d8eaa24 ] Move soft-disconnect sequence out of dwc3_gadget_pullup(). No functional change here. Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/4c0f259b17d95acaaa931f90276683a48a32fe22.1650593829.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/gadget.c | 65 ++++++++++++++++++++++----------------- 1 file changed, 36 insertions(+), 29 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index ea56f4fb234e..9a7656d01d06 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2008,6 +2008,40 @@ static void dwc3_gadget_disable_irq(struct dwc3 *dwc); static void __dwc3_gadget_stop(struct dwc3 *dwc); static int __dwc3_gadget_start(struct dwc3 *dwc); +static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) +{ + u32 count; + + dwc->connected = false; + + /* + * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a + * Section 4.1.8 Table 4-7, it states that for a device-initiated + * disconnect, the SW needs to ensure that it sends "a DEPENDXFER + * command for any active transfers" before clearing the RunStop + * bit. + */ + dwc3_stop_active_transfers(dwc); + __dwc3_gadget_stop(dwc); + + /* + * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a + * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the + * "software needs to acknowledge the events that are generated + * (by writing to GEVNTCOUNTn) while it is waiting for this bit + * to be set to '1'." + */ + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); + count &= DWC3_GEVNTCOUNT_MASK; + if (count > 0) { + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count); + dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % + dwc->ev_buf->length; + } + + return dwc3_gadget_run_stop(dwc, false, false); +} + static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { struct dwc3 *dwc = gadget_to_dwc(g); @@ -2064,33 +2098,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) spin_lock_irqsave(&dwc->lock, flags); if (!is_on) { - u32 count; - - dwc->connected = false; - /* - * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a - * Section 4.1.8 Table 4-7, it states that for a device-initiated - * disconnect, the SW needs to ensure that it sends "a DEPENDXFER - * command for any active transfers" before clearing the RunStop - * bit. - */ - dwc3_stop_active_transfers(dwc); - __dwc3_gadget_stop(dwc); - - /* - * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a - * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the - * "software needs to acknowledge the events that are generated - * (by writing to GEVNTCOUNTn) while it is waiting for this bit - * to be set to '1'." - */ - count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); - count &= DWC3_GEVNTCOUNT_MASK; - if (count > 0) { - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count); - dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % - dwc->ev_buf->length; - } + ret = dwc3_gadget_soft_disconnect(dwc); } else { /* * In the Synopsys DWC_usb31 1.90a programming guide section @@ -2104,9 +2112,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) dwc3_event_buffers_setup(dwc); __dwc3_gadget_start(dwc); + ret = dwc3_gadget_run_stop(dwc, true, false); } - - ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); enable_irq(dwc->irq_gadget); From a5bdea59f43d71aff925133ab27b06859d452ded Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Thu, 21 Apr 2022 19:22:44 -0700 Subject: [PATCH 031/116] usb: dwc3: gadget: Don't modify GEVNTCOUNT in pullup() [ Upstream commit 8f8034f493b5eb1ad21ff392fd30c0cf9e71f73f ] If the GEVNTCOUNT indicates events in the event buffer, the driver needs to acknowledge them before the controller can halt. Simply let the interrupt handler acknowledges the remaining event generated by the controller while polling for DSTS.DEVCTLHLT. This avoids disabling irq and taking care of race condition between the interrupt handlers and pullup(). Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/ea306ec93c41ccafbdb5d16404ff3b6eca299613.1650593829.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/gadget.c | 35 ++++++++--------------------------- 1 file changed, 8 insertions(+), 27 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 9a7656d01d06..4f3548c682ec 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2010,8 +2010,9 @@ static int __dwc3_gadget_start(struct dwc3 *dwc); static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) { - u32 count; + unsigned long flags; + spin_lock_irqsave(&dwc->lock, flags); dwc->connected = false; /* @@ -2023,29 +2024,21 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) */ dwc3_stop_active_transfers(dwc); __dwc3_gadget_stop(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); /* - * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a - * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the - * "software needs to acknowledge the events that are generated - * (by writing to GEVNTCOUNTn) while it is waiting for this bit - * to be set to '1'." + * Note: if the GEVNTCOUNT indicates events in the event buffer, the + * driver needs to acknowledge them before the controller can halt. + * Simply let the interrupt handler acknowledges and handle the + * remaining event generated by the controller while polling for + * DSTS.DEVCTLHLT. */ - count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); - count &= DWC3_GEVNTCOUNT_MASK; - if (count > 0) { - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count); - dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % - dwc->ev_buf->length; - } - return dwc3_gadget_run_stop(dwc, false, false); } static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { struct dwc3 *dwc = gadget_to_dwc(g); - unsigned long flags; int ret; is_on = !!is_on; @@ -2089,14 +2082,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) return 0; } - /* - * Synchronize and disable any further event handling while controller - * is being enabled/disabled. - */ - disable_irq(dwc->irq_gadget); - - spin_lock_irqsave(&dwc->lock, flags); - if (!is_on) { ret = dwc3_gadget_soft_disconnect(dwc); } else { @@ -2106,16 +2091,12 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) * device-initiated disconnect requires a core soft reset * (DCTL.CSftRst) before enabling the run/stop bit. */ - spin_unlock_irqrestore(&dwc->lock, flags); dwc3_core_soft_reset(dwc); - spin_lock_irqsave(&dwc->lock, flags); dwc3_event_buffers_setup(dwc); __dwc3_gadget_start(dwc); ret = dwc3_gadget_run_stop(dwc, true, false); } - spin_unlock_irqrestore(&dwc->lock, flags); - enable_irq(dwc->irq_gadget); pm_runtime_put(dwc->dev); From 4ccf7afa4729bbc3a357552255eea8ba4669692c Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Wed, 27 Jul 2022 19:06:47 -0700 Subject: [PATCH 032/116] usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop [ Upstream commit 040f2dbd2010c43f33ad27249e6dac48456f4d99 ] Relocate the pullups_connected check until after it is ensured that there are no runtime PM transitions. If another context triggered the DWC3 core's runtime resume, it may have already enabled the Run/Stop. Do not re-run the entire pullup sequence again, as it may issue a core soft reset while Run/Stop is already set. This patch depends on commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()") Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded") Cc: stable Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/dwc3/gadget.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4f3548c682ec..a40935f3592b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2043,9 +2043,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) is_on = !!is_on; - if (dwc->pullups_connected == is_on) - return 0; - dwc->softconnect = is_on; /* * Per databook, when we want to stop the gadget, if a control transfer @@ -2082,6 +2079,11 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) return 0; } + if (dwc->pullups_connected == is_on) { + pm_runtime_put(dwc->dev); + return 0; + } + if (!is_on) { ret = dwc3_gadget_soft_disconnect(dwc); } else { From 3826d4f0ef896de29fce3507c0985bfdf808340b Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Mon, 8 Mar 2021 10:51:52 +0800 Subject: [PATCH 033/116] usb: xhci-mtk: get the microframe boundary for ESIT [ Upstream commit 7c986fbc16ae6b2f914a3ebf06a3a4a8d9bb0b7c ] Tune the boundary for FS/LS ESIT due to CS: For ISOC out-ep, the controller starts transfer data after the first SS; for others, the data is already transferred before the last CS. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/49e5a269a47984f3126a70c3fb471b0c2874b8c2.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin --- drivers/usb/host/xhci-mtk-sch.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 8950d1f10a7f..450fa22b7dc7 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -513,22 +513,35 @@ static void update_sch_tt(struct usb_device *udev, list_del(&sch_ep->tt_endpoint); } +static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep) +{ + u32 boundary = sch_ep->esit; + + if (sch_ep->sch_tt) { /* LS/FS with TT */ + /* tune for CS */ + if (sch_ep->ep_type != ISOC_OUT_EP) + boundary++; + else if (boundary > 1) /* normally esit >= 8 for FS/LS */ + boundary--; + } + + return boundary; +} + static int check_sch_bw(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) { u32 offset; - u32 esit; u32 min_bw; u32 min_index; u32 worst_bw; u32 bw_boundary; + u32 esit_boundary; u32 min_num_budget; u32 min_cs_count; bool tt_offset_ok = false; int ret; - esit = sch_ep->esit; - /* * Search through all possible schedule microframes. * and find a microframe where its worst bandwidth is minimum. @@ -537,7 +550,8 @@ static int check_sch_bw(struct usb_device *udev, min_index = 0; min_cs_count = sch_ep->cs_count; min_num_budget = sch_ep->num_budget_microframes; - for (offset = 0; offset < esit; offset++) { + esit_boundary = get_esit_boundary(sch_ep); + for (offset = 0; offset < sch_ep->esit; offset++) { if (is_fs_or_ls(udev->speed)) { ret = check_sch_tt(udev, sch_ep, offset); if (ret) @@ -546,7 +560,7 @@ static int check_sch_bw(struct usb_device *udev, tt_offset_ok = true; } - if ((offset + sch_ep->num_budget_microframes) > sch_ep->esit) + if ((offset + sch_ep->num_budget_microframes) > esit_boundary) break; worst_bw = get_max_bw(sch_bw, sch_ep, offset); From 1833e8e049d0acbbbeb25e6be2179f29ca4254c9 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Mon, 8 Mar 2021 10:51:53 +0800 Subject: [PATCH 034/116] usb: xhci-mtk: add only one extra CS for FS/LS INTR [ Upstream commit 1bf661daf6b084bc4d753f55b54f35dc98709685 ] In USB2 Spec: "11.18.5 TT Response Generation In general, there will be two (or more) complete-split transactions scheduled for a periodic endpoint. However, for interrupt endpoints, the maximum size of the full-/low-speed transaction guarantees that it can never require more than two complete-split transactions. Two complete-split transactions are only required when the transaction spans a microframe boundary." Due to the maxp is 64, and less then 188 (at most in one microframe), seems never span boundary, so use only one CS for FS/LS interrupt transfer, this will save some bandwidth. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/5b9ff09f53d23cf9e5c5437db4ffc18b798bf60c.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin --- drivers/usb/host/xhci-mtk-sch.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 450fa22b7dc7..59ba25ca018d 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -408,13 +408,11 @@ static int check_sch_tt(struct usb_device *udev, { struct mu3h_sch_tt *tt = sch_ep->sch_tt; u32 extra_cs_count; - u32 fs_budget_start; u32 start_ss, last_ss; u32 start_cs, last_cs; int i; start_ss = offset % 8; - fs_budget_start = (start_ss + 1) % 8; if (sch_ep->ep_type == ISOC_OUT_EP) { last_ss = start_ss + sch_ep->cs_count - 1; @@ -450,16 +448,14 @@ static int check_sch_tt(struct usb_device *udev, if (sch_ep->ep_type == ISOC_IN_EP) extra_cs_count = (last_cs == 7) ? 1 : 2; else /* ep_type : INTR IN / INTR OUT */ - extra_cs_count = (fs_budget_start == 6) ? 1 : 2; + extra_cs_count = 1; cs_count += extra_cs_count; if (cs_count > 7) cs_count = 7; /* HW limit */ - for (i = 0; i < cs_count + 2; i++) { - if (test_bit(offset + i, tt->ss_bit_map)) - return -ERANGE; - } + if (test_bit(offset, tt->ss_bit_map)) + return -ERANGE; sch_ep->cs_count = cs_count; /* one for ss, the other for idle */ From d1eed0d3fb8c1981f064d4057df78407e4fabfe8 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Mon, 8 Mar 2021 10:51:54 +0800 Subject: [PATCH 035/116] usb: xhci-mtk: use @sch_tt to check whether need do TT schedule [ Upstream commit 4a56adf4fafbc41ceffce0c3f385f59d4fc3c16a ] It's clearer to use @sch_tt to check whether need do TT schedule, no function is changed. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/324a76782ccaf857a8f01f67aee435e8ec7d0e28.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin --- drivers/usb/host/xhci-mtk-sch.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 59ba25ca018d..b1da3cb077c9 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -548,7 +548,7 @@ static int check_sch_bw(struct usb_device *udev, min_num_budget = sch_ep->num_budget_microframes; esit_boundary = get_esit_boundary(sch_ep); for (offset = 0; offset < sch_ep->esit; offset++) { - if (is_fs_or_ls(udev->speed)) { + if (sch_ep->sch_tt) { ret = check_sch_tt(udev, sch_ep, offset); if (ret) continue; @@ -585,7 +585,7 @@ static int check_sch_bw(struct usb_device *udev, sch_ep->cs_count = min_cs_count; sch_ep->num_budget_microframes = min_num_budget; - if (is_fs_or_ls(udev->speed)) { + if (sch_ep->sch_tt) { /* all offset for tt is not ok*/ if (!tt_offset_ok) return -ERANGE; From 664b0b8f4efa14dffd5008a998e82b703bfd4332 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Mon, 8 Mar 2021 10:51:55 +0800 Subject: [PATCH 036/116] usb: xhci-mtk: add a function to (un)load bandwidth info [ Upstream commit 338af695fffb12a9407c376ce0cebce896c15050 ] Extract a function to load/unload bandwidth info, and remove a dummy check of TT offset. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/6fbc000756a4a4a7efbce651b785fee7561becb6.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin --- drivers/usb/host/xhci-mtk-sch.c | 37 ++++++++++++++------------------- 1 file changed, 16 insertions(+), 21 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index b1da3cb077c9..9a9685f74940 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -375,7 +375,6 @@ static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, sch_ep->bw_budget_table[j]; } } - sch_ep->allocated = used; } static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) @@ -509,6 +508,19 @@ static void update_sch_tt(struct usb_device *udev, list_del(&sch_ep->tt_endpoint); } +static int load_ep_bw(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw, + struct mu3h_sch_ep_info *sch_ep, bool loaded) +{ + if (sch_ep->sch_tt) + update_sch_tt(udev, sch_ep, loaded); + + /* update bus bandwidth info */ + update_bus_bw(sch_bw, sch_ep, loaded); + sch_ep->allocated = loaded; + + return 0; +} + static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep) { u32 boundary = sch_ep->esit; @@ -535,7 +547,6 @@ static int check_sch_bw(struct usb_device *udev, u32 esit_boundary; u32 min_num_budget; u32 min_cs_count; - bool tt_offset_ok = false; int ret; /* @@ -552,8 +563,6 @@ static int check_sch_bw(struct usb_device *udev, ret = check_sch_tt(udev, sch_ep, offset); if (ret) continue; - else - tt_offset_ok = true; } if ((offset + sch_ep->num_budget_microframes) > esit_boundary) @@ -585,29 +594,15 @@ static int check_sch_bw(struct usb_device *udev, sch_ep->cs_count = min_cs_count; sch_ep->num_budget_microframes = min_num_budget; - if (sch_ep->sch_tt) { - /* all offset for tt is not ok*/ - if (!tt_offset_ok) - return -ERANGE; - - update_sch_tt(udev, sch_ep, 1); - } - - /* update bus bandwidth info */ - update_bus_bw(sch_bw, sch_ep, 1); - - return 0; + return load_ep_bw(udev, sch_bw, sch_ep, true); } static void destroy_sch_ep(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) { /* only release ep bw check passed by check_sch_bw() */ - if (sch_ep->allocated) { - update_bus_bw(sch_bw, sch_ep, 0); - if (sch_ep->sch_tt) - update_sch_tt(udev, sch_ep, 0); - } + if (sch_ep->allocated) + load_ep_bw(udev, sch_bw, sch_ep, false); if (sch_ep->sch_tt) drop_tt(udev); From 6cfde07c5d8ee4f1d88d62f59300230c57be885b Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Mon, 8 Mar 2021 10:52:02 +0800 Subject: [PATCH 037/116] usb: xhci-mtk: add some schedule error number [ Upstream commit ccda8c224c0701caac007311d06a2de9543a7590 ] This is used to provide more information about which case causes bandwidth schedule failure. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/9771f44093053b581e9c4be4b7fb68d9fcecad08.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin --- drivers/usb/host/xhci-mtk-sch.c | 44 ++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 9 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 9a9685f74940..a6ec75bf2def 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -25,6 +25,13 @@ */ #define TT_MICROFRAMES_MAX 9 +/* schedule error type */ +#define ESCH_SS_Y6 1001 +#define ESCH_SS_OVERLAP 1002 +#define ESCH_CS_OVERFLOW 1003 +#define ESCH_BW_OVERFLOW 1004 +#define ESCH_FIXME 1005 + /* mtk scheduler bitmasks */ #define EP_BPKTS(p) ((p) & 0x7f) #define EP_BCSCOUNT(p) (((p) & 0x7) << 8) @@ -32,6 +39,24 @@ #define EP_BOFFSET(p) ((p) & 0x3fff) #define EP_BREPEAT(p) (((p) & 0x7fff) << 16) +static char *sch_error_string(int err_num) +{ + switch (err_num) { + case ESCH_SS_Y6: + return "Can't schedule Start-Split in Y6"; + case ESCH_SS_OVERLAP: + return "Can't find a suitable Start-Split location"; + case ESCH_CS_OVERFLOW: + return "The last Complete-Split is greater than 7"; + case ESCH_BW_OVERFLOW: + return "Bandwidth exceeds the maximum limit"; + case ESCH_FIXME: + return "FIXME, to be resolved"; + default: + return "Unknown"; + } +} + static int is_fs_or_ls(enum usb_device_speed speed) { return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; @@ -395,7 +420,7 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) for (j = 0; j < sch_ep->cs_count; j++) { tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_cost_per_microframe; if (tmp > FS_PAYLOAD_MAX) - return -ERANGE; + return -ESCH_BW_OVERFLOW; } } @@ -421,11 +446,11 @@ static int check_sch_tt(struct usb_device *udev, * must never schedule Start-Split in Y6 */ if (!(start_ss == 7 || last_ss < 6)) - return -ERANGE; + return -ESCH_SS_Y6; for (i = 0; i < sch_ep->cs_count; i++) if (test_bit(offset + i, tt->ss_bit_map)) - return -ERANGE; + return -ESCH_SS_OVERLAP; } else { u32 cs_count = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); @@ -435,14 +460,14 @@ static int check_sch_tt(struct usb_device *udev, * must never schedule Start-Split in Y6 */ if (start_ss == 6) - return -ERANGE; + return -ESCH_SS_Y6; /* one uframe for ss + one uframe for idle */ start_cs = (start_ss + 2) % 8; last_cs = start_cs + cs_count - 1; if (last_cs > 7) - return -ERANGE; + return -ESCH_CS_OVERFLOW; if (sch_ep->ep_type == ISOC_IN_EP) extra_cs_count = (last_cs == 7) ? 1 : 2; @@ -454,7 +479,7 @@ static int check_sch_tt(struct usb_device *udev, cs_count = 7; /* HW limit */ if (test_bit(offset, tt->ss_bit_map)) - return -ERANGE; + return -ESCH_SS_OVERLAP; sch_ep->cs_count = cs_count; /* one for ss, the other for idle */ @@ -547,7 +572,7 @@ static int check_sch_bw(struct usb_device *udev, u32 esit_boundary; u32 min_num_budget; u32 min_cs_count; - int ret; + int ret = 0; /* * Search through all possible schedule microframes. @@ -588,7 +613,7 @@ static int check_sch_bw(struct usb_device *udev, /* check bandwidth */ if (min_bw > bw_boundary) - return -ERANGE; + return ret ? ret : -ESCH_BW_OVERFLOW; sch_ep->offset = min_index; sch_ep->cs_count = min_cs_count; @@ -765,7 +790,8 @@ int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) ret = check_sch_bw(udev, sch_bw, sch_ep); if (ret) { - xhci_err(xhci, "Not enough bandwidth!\n"); + xhci_err(xhci, "Not enough bandwidth! (%s)\n", + sch_error_string(-ret)); return -ENOSPC; } } From 174645cc63c349c87f0593f2007b14d96365448b Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Fri, 18 Jun 2021 13:46:05 +0800 Subject: [PATCH 038/116] usb: xhci-mtk: allow multiple Start-Split in a microframe [ Upstream commit d3997fce189fc4423169c51a81ba5ca01144d886 ] This patch is used to relax bandwidth schedule by allowing multiple Start-Split in the same microframe. Reviewed-and-Tested-by: Ikjoon Jang Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1623995165-25759-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin --- drivers/usb/host/xhci-mtk-sch.c | 18 ------------------ drivers/usb/host/xhci-mtk.h | 2 -- 2 files changed, 20 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index a6ec75bf2def..f048af9c5335 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -430,11 +430,9 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) static int check_sch_tt(struct usb_device *udev, struct mu3h_sch_ep_info *sch_ep, u32 offset) { - struct mu3h_sch_tt *tt = sch_ep->sch_tt; u32 extra_cs_count; u32 start_ss, last_ss; u32 start_cs, last_cs; - int i; start_ss = offset % 8; @@ -448,10 +446,6 @@ static int check_sch_tt(struct usb_device *udev, if (!(start_ss == 7 || last_ss < 6)) return -ESCH_SS_Y6; - for (i = 0; i < sch_ep->cs_count; i++) - if (test_bit(offset + i, tt->ss_bit_map)) - return -ESCH_SS_OVERLAP; - } else { u32 cs_count = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); @@ -478,9 +472,6 @@ static int check_sch_tt(struct usb_device *udev, if (cs_count > 7) cs_count = 7; /* HW limit */ - if (test_bit(offset, tt->ss_bit_map)) - return -ESCH_SS_OVERLAP; - sch_ep->cs_count = cs_count; /* one for ss, the other for idle */ sch_ep->num_budget_microframes = cs_count + 2; @@ -502,11 +493,9 @@ static void update_sch_tt(struct usb_device *udev, struct mu3h_sch_tt *tt = sch_ep->sch_tt; u32 base, num_esit; int bw_updated; - int bits; int i, j; num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; - bits = (sch_ep->ep_type == ISOC_OUT_EP) ? sch_ep->cs_count : 1; if (used) bw_updated = sch_ep->bw_cost_per_microframe; @@ -516,13 +505,6 @@ static void update_sch_tt(struct usb_device *udev, for (i = 0; i < num_esit; i++) { base = sch_ep->offset + i * sch_ep->esit; - for (j = 0; j < bits; j++) { - if (used) - set_bit(base + j, tt->ss_bit_map); - else - clear_bit(base + j, tt->ss_bit_map); - } - for (j = 0; j < sch_ep->cs_count; j++) tt->fs_bus_bw[base + j] += bw_updated; } diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index 985e7a19f6f6..2f702342de66 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -20,14 +20,12 @@ #define XHCI_MTK_MAX_ESIT 64 /** - * @ss_bit_map: used to avoid start split microframes overlay * @fs_bus_bw: array to keep track of bandwidth already used for FS * @ep_list: Endpoints using this TT * @usb_tt: usb TT related * @tt_port: TT port number */ struct mu3h_sch_tt { - DECLARE_BITMAP(ss_bit_map, XHCI_MTK_MAX_ESIT); u32 fs_bus_bw[XHCI_MTK_MAX_ESIT]; struct list_head ep_list; struct usb_tt *usb_tt; From 9a3695bde9c7fa418cda20cc9f7e0407df33d5cd Mon Sep 17 00:00:00 2001 From: Ikjoon Jang Date: Thu, 5 Aug 2021 13:39:57 +0800 Subject: [PATCH 039/116] usb: xhci-mtk: relax TT periodic bandwidth allocation [ Upstream commit 548011957d1d72e0b662300c8b32b81d593b796e ] Currently xhci-mtk needs software-managed bandwidth allocation for periodic endpoints, it allocates the microframe index for the first start-split packet for each endpoint. As this index allocation logic should avoid the conflicts with other full/low-speed periodic endpoints, it uses the worst case byte budgets on high-speed bus bandwidth For example, for an isochronos IN endpoint with 192 bytes budget, it will consume the whole 4 u-frames(188 * 4) while the actual full-speed bus budget should be just 192bytes. This patch changes the low/full-speed bandwidth allocation logic to use "approximate" best case budget for lower speed bandwidth management. For the same endpoint from the above example, the approximate best case budget is now reduced to (188 * 2) bytes. Without this patch, many usb audio headsets with 3 interfaces (audio input, audio output, and HID) cannot be configured on xhci-mtk. Signed-off-by: Ikjoon Jang Link: https://lore.kernel.org/r/20210805133937.1.Ia8174b875bc926c12ce427a5a1415dea31cc35ae@changeid Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/host/xhci-mtk-sch.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index f048af9c5335..4a7b200674ea 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -408,16 +408,17 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) u32 num_esit, tmp; int base; int i, j; + u8 uframes = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; + + if (sch_ep->ep_type == INT_IN_EP || sch_ep->ep_type == ISOC_IN_EP) + offset++; + for (i = 0; i < num_esit; i++) { base = offset + i * sch_ep->esit; - /* - * Compared with hs bus, no matter what ep type, - * the hub will always delay one uframe to send data - */ - for (j = 0; j < sch_ep->cs_count; j++) { + for (j = 0; j < uframes; j++) { tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_cost_per_microframe; if (tmp > FS_PAYLOAD_MAX) return -ESCH_BW_OVERFLOW; @@ -494,6 +495,8 @@ static void update_sch_tt(struct usb_device *udev, u32 base, num_esit; int bw_updated; int i, j; + int offset = sch_ep->offset; + u8 uframes = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; @@ -502,10 +505,13 @@ static void update_sch_tt(struct usb_device *udev, else bw_updated = -sch_ep->bw_cost_per_microframe; - for (i = 0; i < num_esit; i++) { - base = sch_ep->offset + i * sch_ep->esit; + if (sch_ep->ep_type == INT_IN_EP || sch_ep->ep_type == ISOC_IN_EP) + offset++; - for (j = 0; j < sch_ep->cs_count; j++) + for (i = 0; i < num_esit; i++) { + base = offset + i * sch_ep->esit; + + for (j = 0; j < uframes; j++) tt->fs_bus_bw[base + j] += bw_updated; } From 9ad48cbf8b07f10c1e4a7a262b32a9179ae9dd2d Mon Sep 17 00:00:00 2001 From: Siddh Raman Pant Date: Sat, 20 Aug 2022 01:33:40 +0530 Subject: [PATCH 040/116] wifi: mac80211: Fix UAF in ieee80211_scan_rx() [ Upstream commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c ] ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com Suggested-by: Johannes Berg Signed-off-by: Siddh Raman Pant Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- net/mac80211/scan.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 344b2c22e75b..c353162e81ae 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -431,10 +431,6 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) scan_req = rcu_dereference_protected(local->scan_req, lockdep_is_held(&local->mtx)); - if (scan_req != local->int_scan_req) { - local->scan_info.aborted = aborted; - cfg80211_scan_done(scan_req, &local->scan_info); - } RCU_INIT_POINTER(local->scan_req, NULL); scan_sdata = rcu_dereference_protected(local->scan_sdata, @@ -444,6 +440,13 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) local->scanning = 0; local->scan_chandef.chan = NULL; + synchronize_rcu(); + + if (scan_req != local->int_scan_req) { + local->scan_info.aborted = aborted; + cfg80211_scan_done(scan_req, &local->scan_info); + } + /* Set power back to normal operating levels. */ ieee80211_hw_config(local, 0); From 85a64208b319183cf565fda94a3db427f6eb1d54 Mon Sep 17 00:00:00 2001 From: "Codrin.Ciubotariu@microchip.com" Date: Tue, 7 Jan 2020 11:17:47 +0000 Subject: [PATCH 041/116] tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending data [ Upstream commit 477b8383100023ea0769979cff67e9be3a720397 ] At this moment, TXEMPTY is checked before sending data on RS485 and ISO7816 modes. However, TXEMPTY is risen when FIFO (if used) or the Transmit Shift Register are empty, even though TXRDY might be up and controller is able to receive data. Since the controller sends data only when TXEMPTY is ready, on RS485, when DMA is not used, the RTS pin is driven low after each byte. With this patch, the characters will be transmitted when TXRDY is up and so, RTS pin will remain high between bytes. The performance improvement on RS485 is about 8% with a baudrate of 300. Signed-off-by: Codrin Ciubotariu Acked-by: Richard Genoud Link: https://lore.kernel.org/r/20200107111656.26308-1-codrin.ciubotariu@microchip.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled") Signed-off-by: Sasha Levin --- drivers/tty/serial/atmel_serial.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 3b2c25bd2e06..e011f3d20224 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -313,7 +313,11 @@ static int atmel_config_rs485(struct uart_port *port, if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + if (port->rs485.flags & SER_RS485_RX_DURING_TX) + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + else + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + atmel_uart_writel(port, ATMEL_US_TTGR, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; @@ -832,7 +836,7 @@ static void atmel_tx_chars(struct uart_port *port) struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); if (port->x_char && - (atmel_uart_readl(port, ATMEL_US_CSR) & atmel_port->tx_done_mask)) { + (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY)) { atmel_uart_write_char(port, port->x_char); port->icount.tx++; port->x_char = 0; @@ -840,8 +844,7 @@ static void atmel_tx_chars(struct uart_port *port) if (uart_circ_empty(xmit) || uart_tx_stopped(port)) return; - while (atmel_uart_readl(port, ATMEL_US_CSR) & - atmel_port->tx_done_mask) { + while (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY) { atmel_uart_write_char(port, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; @@ -852,10 +855,20 @@ static void atmel_tx_chars(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (!uart_circ_empty(xmit)) + if (!uart_circ_empty(xmit)) { + /* we still have characters to transmit, so we should continue + * transmitting them when TX is ready, regardless of + * mode or duplexity + */ + atmel_port->tx_done_mask |= ATMEL_US_TXRDY; + /* Enable interrupts */ atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); + } else { + if (atmel_uart_is_half_duplex(port)) + atmel_port->tx_done_mask &= ~ATMEL_US_TXRDY; + } } static void atmel_complete_tx_dma(void *arg) @@ -2541,8 +2554,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, * Use TXEMPTY for interrupt when rs485 or ISO7816 else TXRDY or * ENDTX|TXBUFE */ - if (port->rs485.flags & SER_RS485_ENABLED || - port->iso7816.flags & SER_ISO7816_ENABLED) + if (atmel_uart_is_half_duplex(port)) atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; else if (atmel_use_pdc_tx(port)) { port->fifosize = PDC_BUFFER_SIZE; From e56a402819974b8f4b9e79fb3bd7a6b82f2c0fe9 Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo Date: Sun, 10 Apr 2022 12:46:42 +0200 Subject: [PATCH 042/116] serial: atmel: remove redundant assignment in rs485_config [ Upstream commit 60efd0513916f195dd85bfbf21653f74f9ab019c ] In uart_set_rs485_config() the serial core already assigns the passed serial_rs485 struct to the uart port. So remove the assignment from the drivers rs485_config() function to avoid redundancy. Reviewed-by: Claudiu Beznea Acked-by: Richard Genoud Signed-off-by: Lino Sanfilippo Link: https://lore.kernel.org/r/20220410104642.32195-10-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled") Signed-off-by: Sasha Levin --- drivers/tty/serial/atmel_serial.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index e011f3d20224..44608a06bb2c 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -309,11 +309,9 @@ static int atmel_config_rs485(struct uart_port *port, /* Resetting serial mode to RS232 (0x0) */ mode &= ~ATMEL_US_USMODE; - port->rs485 = *rs485conf; - if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (port->rs485.flags & SER_RS485_RX_DURING_TX) + if (rs485conf->flags & SER_RS485_RX_DURING_TX) atmel_port->tx_done_mask = ATMEL_US_TXRDY; else atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; From da8ac086943eb93199e41530f1b89f180e0edf32 Mon Sep 17 00:00:00 2001 From: Sergiu Moga Date: Wed, 24 Aug 2022 17:29:03 +0300 Subject: [PATCH 043/116] tty: serial: atmel: Preserve previous USART mode if RS485 disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 692a8ebcfc24f4a5bea0eb2967e450f584193da6 ] Whenever the atmel_rs485_config() driver method would be called, the USART mode is reset to normal mode before even checking if RS485 flag is set, thus resulting in losing the previous USART mode in the case where the checking fails. Some tools, such as `linux-serial-test`, lead to the driver calling this method when doing the setup of the serial port: after setting the port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.), `linux-serial-test` tries to enable/disable RS485 depending on the commandline arguments that were passed. Example of how this issue could reveal itself: When doing a serial communication with Hardware Flow Control through `linux-serial-test`, the tool would lead to the driver roughly doing the following: - set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the ATMEL_US_MR register) through the atmel_set_termios() to enable Hardware Flow Control - disable RS485 through the atmel_config_rs485() method Thus, when the latter is called, the mode will be reset and the previously set bit is unset, leaving USART in normal mode instead of the expected Hardware Flow Control mode. This fix ensures that this reset is only done if the checking for RS485 succeeds and that the previous mode is preserved otherwise. Fixes: e8faff7330a35 ("ARM: 6092/1: atmel_serial: support for RS485 communications") Cc: stable Reviewed-by: Ilpo Järvinen Signed-off-by: Sergiu Moga Link: https://lore.kernel.org/r/20220824142902.502596-1-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/atmel_serial.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 44608a06bb2c..3bd93558b443 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -306,9 +306,6 @@ static int atmel_config_rs485(struct uart_port *port, mode = atmel_uart_readl(port, ATMEL_US_MR); - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); if (rs485conf->flags & SER_RS485_RX_DURING_TX) @@ -318,6 +315,7 @@ static int atmel_config_rs485(struct uart_port *port, atmel_uart_writel(port, ATMEL_US_TTGR, rs485conf->delay_rts_after_send); + mode &= ~ATMEL_US_USMODE; mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); From ddf7bc22181717d3a1ee66602be29021bbaaacbf Mon Sep 17 00:00:00 2001 From: Jean-Francois Le Fillatre Date: Wed, 24 Aug 2022 21:13:21 +0200 Subject: [PATCH 044/116] usb: add quirks for Lenovo OneLink+ Dock [ Upstream commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58 ] The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream Those two controllers both have problems with some USB3.0 devices, particularly self-powered ones. Typical error messages include: Timeout while waiting for setup device command device not accepting address X, error -62 unable to enumerate USB device By process of elimination the controllers themselves were identified as the cause of the problem. Through trial and error the issue was solved by using USB_QUIRK_RESET_RESUME for both chips. Signed-off-by: Jean-Francois Le Fillatre Cc: stable Link: https://lore.kernel.org/r/20220824191320.17883-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f8f2de7899a9..dd7947547054 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -438,6 +438,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */ + { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, From 10c5d34f6f68f38a28cfbad4a43210c6621c152a Mon Sep 17 00:00:00 2001 From: Piyush Mehta Date: Wed, 24 Aug 2022 12:42:53 +0530 Subject: [PATCH 045/116] usb: gadget: udc-xilinx: replace memcpy with memcpy_toio [ Upstream commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b ] For ARM processor, unaligned access to device memory is not allowed. Method memcpy does not take care of alignment. USB detection failure with the unaligned address of memory access, with below kernel crash. To fix the unaligned address the kernel panic issue, replace memcpy with memcpy_toio method. Kernel crash: Unable to handle kernel paging request at virtual address ffff80000c05008a Mem abort info: ESR = 0x96000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000 [ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003, pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713 Internal error: Oops: 96000061 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x30/0x260 lr : __xudc_ep0_queue+0xf0/0x110 sp : ffff800008003d00 x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0 x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080 x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080 x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000 x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000 x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200 x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0 x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112 x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80 x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088 Call trace: __memcpy+0x30/0x260 xudc_ep0_queue+0x3c/0x60 usb_ep_queue+0x38/0x44 composite_ep0_queue.constprop.0+0x2c/0xc0 composite_setup+0x8d0/0x185c configfs_composite_setup+0x74/0xb0 xudc_irq+0x570/0xa40 __handle_irq_event_percpu+0x58/0x170 handle_irq_event+0x60/0x120 handle_fasteoi_irq+0xc0/0x220 handle_domain_irq+0x60/0x90 gic_handle_irq+0x74/0xa0 call_on_irq_stack+0x2c/0x60 do_interrupt_handler+0x54/0x60 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x78/0x7c arch_cpu_idle+0x18/0x2c do_idle+0xdc/0x15c cpu_startup_entry+0x28/0x60 rest_init+0xc8/0xe0 arch_call_rest_init+0x10/0x1c start_kernel+0x694/0x6d4 __primary_switched+0xa4/0xac Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support") Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij Signed-off-by: Piyush Mehta Link: https://lore.kernel.org/r/20220824071253.1261096-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/gadget/udc/udc-xilinx.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index de22dd543653..111d1e6d952f 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -496,11 +496,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, /* Get the Buffer address and copy the transmit data.*/ eprambase = (u32 __force *)(udc->addr + ep->rambase); if (ep->is_in) { - memcpy(eprambase, bufferptr, bytestosend); + memcpy_toio(eprambase, bufferptr, bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF0COUNT_OFFSET, bufferlen); } else { - memcpy(bufferptr, eprambase, bytestosend); + memcpy_toio(bufferptr, eprambase, bytestosend); } /* * Enable the buffer for transmission. @@ -514,11 +514,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, eprambase = (u32 __force *)(udc->addr + ep->rambase + ep->ep_usb.maxpacket); if (ep->is_in) { - memcpy(eprambase, bufferptr, bytestosend); + memcpy_toio(eprambase, bufferptr, bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF1COUNT_OFFSET, bufferlen); } else { - memcpy(bufferptr, eprambase, bytestosend); + memcpy_toio(bufferptr, eprambase, bytestosend); } /* * Enable the buffer for transmission. @@ -1020,7 +1020,7 @@ static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req) udc->addr); length = req->usb_req.actual = min_t(u32, length, EP0_MAX_PACKET); - memcpy(corebuf, req->usb_req.buf, length); + memcpy_toio(corebuf, req->usb_req.buf, length); udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); } else { @@ -1746,7 +1746,7 @@ static void xudc_handle_setup(struct xusb_udc *udc) /* Load up the chapter 9 command buffer.*/ ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET); - memcpy(&setup, ep0rambase, 8); + memcpy_toio(&setup, ep0rambase, 8); udc->setup = setup; udc->setup.wValue = cpu_to_le16(setup.wValue); @@ -1833,7 +1833,7 @@ static void xudc_ep0_out(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + bytes_to_rx; - memcpy(buffer, ep0rambase, bytes_to_rx); + memcpy_toio(buffer, ep0rambase, bytes_to_rx); if (req->usb_req.length == req->usb_req.actual) { /* Data transfer completed get ready for Status stage */ @@ -1909,7 +1909,7 @@ static void xudc_ep0_in(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + length; - memcpy(ep0rambase, buffer, length); + memcpy_toio(ep0rambase, buffer, length); } udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); From 05ec31717febae2c90d4fc619db6ca9c27daeec8 Mon Sep 17 00:00:00 2001 From: Pawel Laszczak Date: Thu, 25 Aug 2022 08:21:37 +0200 Subject: [PATCH 046/116] usb: cdns3: fix issue with rearming ISO OUT endpoint [ Upstream commit b46a6b09fa056042a302b181a1941f0056944603 ] ISO OUT endpoint is enabled during queuing first usb request in transfer ring and disabled when TRBERR is reported by controller. After TRBERR and before next transfer added to TR driver must again reenable endpoint but does not. To solve this issue during processing TRBERR event driver must set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: Acked-by: Peter Chen Signed-off-by: Pawel Laszczak Link: https://lore.kernel.org/r/20220825062137.5766-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/cdns3/gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index 8bedf0504e92..d111cf81cece 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -1259,6 +1259,7 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) ep_cfg &= ~EP_CFG_ENABLE; writel(ep_cfg, &priv_dev->regs->ep_cfg); priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN; + priv_ep->flags |= EP_UPDATE_EP_TRBADDR; } cdns3_transfer_completed(priv_dev, priv_ep); } else if (!(priv_ep->flags & EP_STALLED) && From 430c9bd664ec76c521120704fad8207bd5c06769 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 31 Aug 2022 10:34:25 +0200 Subject: [PATCH 047/116] Revert "usb: add quirks for Lenovo OneLink+ Dock" [ Upstream commit 58bfe7d8e31014d7ce246788df99c56e3cfe6c68 ] This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58. The quirk does not work properly, more work is needed to determine what should be done here. Reported-by: Oliver Neukum Cc: Jean-Francois Le Fillatre Cc: stable Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock") Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/core/quirks.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index dd7947547054..f8f2de7899a9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -438,10 +438,6 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, - /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */ - { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME }, - { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME }, - /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, From f5e322ffe7aa2fceea6e0c9b160ac81690027871 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Sep 2022 09:10:08 +0200 Subject: [PATCH 048/116] Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio" [ Upstream commit fe0a2ac7c627b064c479ad0c3b25e531d342e048 ] This reverts commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b as it throws up a bunch of sparse warnings as reported by the kernel test robot. Reported-by: kernel test robot Link: https://lore.kernel.org/r/202209020044.CX2PfZzM-lkp@intel.com Fixes: 8cb339f1c1f0 ("usb: gadget: udc-xilinx: replace memcpy with memcpy_toio") Cc: stable@vger.kernel.org Cc: Linus Walleij Cc: Piyush Mehta Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/gadget/udc/udc-xilinx.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index 111d1e6d952f..de22dd543653 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -496,11 +496,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, /* Get the Buffer address and copy the transmit data.*/ eprambase = (u32 __force *)(udc->addr + ep->rambase); if (ep->is_in) { - memcpy_toio(eprambase, bufferptr, bytestosend); + memcpy(eprambase, bufferptr, bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF0COUNT_OFFSET, bufferlen); } else { - memcpy_toio(bufferptr, eprambase, bytestosend); + memcpy(bufferptr, eprambase, bytestosend); } /* * Enable the buffer for transmission. @@ -514,11 +514,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, eprambase = (u32 __force *)(udc->addr + ep->rambase + ep->ep_usb.maxpacket); if (ep->is_in) { - memcpy_toio(eprambase, bufferptr, bytestosend); + memcpy(eprambase, bufferptr, bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF1COUNT_OFFSET, bufferlen); } else { - memcpy_toio(bufferptr, eprambase, bytestosend); + memcpy(bufferptr, eprambase, bytestosend); } /* * Enable the buffer for transmission. @@ -1020,7 +1020,7 @@ static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req) udc->addr); length = req->usb_req.actual = min_t(u32, length, EP0_MAX_PACKET); - memcpy_toio(corebuf, req->usb_req.buf, length); + memcpy(corebuf, req->usb_req.buf, length); udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); } else { @@ -1746,7 +1746,7 @@ static void xudc_handle_setup(struct xusb_udc *udc) /* Load up the chapter 9 command buffer.*/ ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET); - memcpy_toio(&setup, ep0rambase, 8); + memcpy(&setup, ep0rambase, 8); udc->setup = setup; udc->setup.wValue = cpu_to_le16(setup.wValue); @@ -1833,7 +1833,7 @@ static void xudc_ep0_out(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + bytes_to_rx; - memcpy_toio(buffer, ep0rambase, bytes_to_rx); + memcpy(buffer, ep0rambase, bytes_to_rx); if (req->usb_req.length == req->usb_req.actual) { /* Data transfer completed get ready for Status stage */ @@ -1909,7 +1909,7 @@ static void xudc_ep0_in(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + length; - memcpy_toio(ep0rambase, buffer, length); + memcpy(ep0rambase, buffer, length); } udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); From 95b97afdde753aa58ce01dd7ab26c9f5d519405f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 1 Sep 2022 10:36:34 -0400 Subject: [PATCH 049/116] USB: core: Fix RST error in hub.c commit 766a96dc558385be735a370db867e302c8f22153 upstream. A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: Reported-by: Stephen Rothwell Reviewed-by: Bagas Sanjaya Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 68d860a3fd61..50c7df59f7e8 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5924,7 +5924,7 @@ re_enumerate_no_bos: * * Return: The same as for usb_reset_and_verify_device(). * However, if a reset is already in progress (for instance, if a - * driver doesn't have pre_ or post_reset() callbacks, and while + * driver doesn't have pre_reset() or post_reset() callbacks, and while * being unbound or re-bound during the ongoing reset its disconnect() * or probe() routine tries to perform a second, nested reset), the * routine returns -EINPROGRESS. From 55f0f59e8227ec2047a4c453e72d1e078ead5afe Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Carl=20Yin=28=E6=AE=B7=E5=BC=A0=E6=88=90=29?= Date: Fri, 2 Sep 2022 09:49:43 +0000 Subject: [PATCH 050/116] USB: serial: option: add Quectel BG95 0x0203 composition commit f8f67eff6847f9b8d753fa029723bcc54296055a upstream. Add support for the following Quectel BG95 composition: 0x0203: Diag + GNSS + Modem + ECM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index cbe8ad3cd61f..6d5d62f70dba 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1138,6 +1138,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */ + .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), From 78d3ae9bfad6e48e6d5a9239de60c2005c751452 Mon Sep 17 00:00:00 2001 From: jerry meng Date: Mon, 5 Sep 2022 14:35:33 +0800 Subject: [PATCH 051/116] USB: serial: option: add Quectel RM520N commit d640c4cb8f2f933c0ca896541f9de7fb1ae245f4 upstream. add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry meng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6d5d62f70dba..14aa8500221b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -256,6 +256,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 #define QUECTEL_PRODUCT_RM500K 0x7001 @@ -1161,6 +1162,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, From 7fff38ab90b81638738861bbe2f03c132bc2826d Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Tue, 13 Sep 2022 11:06:41 +0530 Subject: [PATCH 052/116] ALSA: hda/tegra: set depop delay for tegra commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream. Reduce the suspend time by setting depop delay to 10ms for tegra. Signed-off-by: Mohan Kumar Cc: Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 5128a5df16fd..169e74299987 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3703,6 +3703,7 @@ static int patch_tegra_hdmi(struct hda_codec *codec) if (err) return err; + codec->depop_delay = 10; codec->patch_ops.build_pcms = tegra_hdmi_build_pcms; spec = codec->spec; spec->chmap.ops.chmap_cea_alloc_validate_get_type = From 95b9a7f0bfbb9ced8f416837786113b392e92265 Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Mon, 12 Sep 2022 21:37:16 +0300 Subject: [PATCH 053/116] ALSA: hda: add Intel 5 Series / 3400 PCI DID commit 4d40ceef4745536289012670103c59264e0fb3ec upstream. Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM capabilities as 0x3b56. In practise this allow use of HDMI/DP display audio via i915. BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751 Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index b8fe0ec5d624..5b892e7090dd 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2528,6 +2528,8 @@ static const struct pci_device_id azx_ids[] = { /* 5 Series/3400 */ { PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, + { PCI_DEVICE(0x8086, 0x3b57), + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Poulsbo */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE }, From dafeac1226a461e17a83d091b1bfb0106b7fd6bb Mon Sep 17 00:00:00 2001 From: huangwenhui Date: Tue, 13 Sep 2022 13:46:22 +0800 Subject: [PATCH 054/116] ALSA: hda/realtek: Add quirk for Huawei WRT-WX9 commit cbcdf8c4d35cd74aee8581eb2f0453e0ecab7b05 upstream. Fixes headphone and headset microphone detection on Huawei WRT-WX9. Signed-off-by: huangwenhui Cc: Link: https://lore.kernel.org/r/20220913054622.15979-1-huangwenhuia@uniontech.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d925ae7f1b02..cd9948ce6eae 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8425,6 +8425,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x511f, "Thinkpad", ALC298_FIXUP_TPT470_DOCK), SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), SND_PCI_QUIRK(0x19e5, 0x3204, "Huawei MACH-WX9", ALC256_FIXUP_HUAWEI_MACH_WX9_PINS), + SND_PCI_QUIRK(0x19e5, 0x320f, "Huawei WRT-WX9 ", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1b35, 0x1235, "CZC B20", ALC269_FIXUP_CZC_B20), SND_PCI_QUIRK(0x1b35, 0x1236, "CZC TMI", ALC269_FIXUP_CZC_TMI), SND_PCI_QUIRK(0x1b35, 0x1237, "CZC L101", ALC269_FIXUP_CZC_L101), From 8f8a740e9160b9fcd70781575f3738672d62afd9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 15 Sep 2022 17:47:24 +0200 Subject: [PATCH 055/116] ALSA: hda/realtek: Re-arrange quirk table entries commit b16c8f229a58eaddfc58aab447253464abd3c85e upstream. A few entries have been mistakenly inserted in wrong positions without considering the SSID ordering. Place them at right positions. Fixes: b7557267c233 ("ALSA: hda/realtek: Add quirk for ASUS GA402") Fixes: 94db9cc8f8fa ("ALSA: hda/realtek: Add quirk for ASUS GU603") Fixes: 739d0959fbed ("ALSA: hda: Add quirk for ASUS Flow x13") Cc: Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cd9948ce6eae..951c496a9836 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8229,10 +8229,11 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK), SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A), + SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK), + SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x1740, "ASUS UX430UA", ALC295_FIXUP_ASUS_DACS), SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK), - SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK), SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS), SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC), @@ -8248,13 +8249,12 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), - SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), - SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC), From 5f622518a7d0030bd2747df165fa4850831a12d3 Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Thu, 15 Sep 2022 20:09:19 +1200 Subject: [PATCH 056/116] ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack commit c611e659044168e7abcbae8ba1ea833521498fbb upstream. Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones Cc: Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 951c496a9836..a126bff24d48 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6484,6 +6484,7 @@ enum { ALC294_FIXUP_ASUS_GU502_HP, ALC294_FIXUP_ASUS_GU502_PINS, ALC294_FIXUP_ASUS_GU502_VERBS, + ALC294_FIXUP_ASUS_G513_PINS, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_GPIO_LED, @@ -7760,6 +7761,15 @@ static const struct hda_fixup alc269_fixups[] = { [ALC294_FIXUP_ASUS_GU502_HP] = { .type = HDA_FIXUP_FUNC, .v.func = alc294_fixup_gu502_hp, + }, + [ALC294_FIXUP_ASUS_G513_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x03a11050 }, /* front HP mic */ + { 0x1a, 0x03a11c30 }, /* rear external mic */ + { 0x21, 0x03211420 }, /* front HP out */ + { } + }, }, [ALC294_FIXUP_ASUS_COEF_1B] = { .type = HDA_FIXUP_VERBS, @@ -8253,6 +8263,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), + SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), From b90ac48c0540fa1b36b79b18f80e8dba8c26a3ca Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Thu, 15 Sep 2022 20:09:20 +1200 Subject: [PATCH 057/116] ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack commit bc2c23549ccd7105eb6ff0d4f0ac519285628673 upstream. Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones Cc: Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a126bff24d48..327f45630b1f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6485,6 +6485,7 @@ enum { ALC294_FIXUP_ASUS_GU502_PINS, ALC294_FIXUP_ASUS_GU502_VERBS, ALC294_FIXUP_ASUS_G513_PINS, + ALC285_FIXUP_ASUS_G533Z_PINS, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_GPIO_LED, @@ -7771,6 +7772,15 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC285_FIXUP_ASUS_G533Z_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x14, 0x90170120 }, + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_G513_PINS, + }, [ALC294_FIXUP_ASUS_COEF_1B] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -8258,6 +8268,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), From befadcf8f7f25fa26a7ea382885f851772ea43ba Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Thu, 15 Sep 2022 20:09:21 +1200 Subject: [PATCH 058/116] ALSA: hda/realtek: Add quirk for ASUS GA503R laptop commit ba1f818053b0668a1ce2fe86b840e81b592cc560 upstream. The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs as early models and the G14, this includes bass speakers which are by default mapped incorrectly to the 0x06 node. Add a quirk to use the same DAC pairs as the G14. Signed-off-by: Luke D. Jones Cc: Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 327f45630b1f..442fe62fc984 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8276,6 +8276,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1c52, "ASUS Zephyrus G15 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), From 9599d4601941d7898728a9371a3cb4d457529a96 Mon Sep 17 00:00:00 2001 From: Callum Osmotherly Date: Thu, 15 Sep 2022 22:36:08 +0930 Subject: [PATCH 059/116] ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop commit 1885ff13d4c42910b37a0e3f7c2f182520f4eed1 upstream. Just as with the 5570 (and the other Dell laptops), this enables the two subwoofer speakers on the Dell Precision 5530 together with the main ones, significantly increasing the audio quality. I've tested this myself on a 5530 and can confirm it's working as expected. Signed-off-by: Callum Osmotherly Cc: Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 442fe62fc984..930bb040b403 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8138,6 +8138,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0872, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0873, "Dell Precision 3930", ALC255_FIXUP_DUMMY_LINEOUT_VERB), + SND_PCI_QUIRK(0x1028, 0x087d, "Dell Precision 5530", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x08ad, "Dell WYSE AIO", ALC225_FIXUP_DELL_WYSE_AIO_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x08ae, "Dell WYSE NB", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0935, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), From cafb9cad9bcc4ff89e8e7a25db1f72ab51e42960 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 20 Sep 2022 17:08:23 +0200 Subject: [PATCH 060/116] efi: libstub: check Shim mode using MokSBStateRT commit 5f56a74cc0a6d9b9f8ba89cea29cd7c4774cb2b1 upstream. We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies. However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system. So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check. Cc: # v4.19+ Signed-off-by: Ard Biesheuvel Reviewed-by: Ilias Apalodimas Reviewed-by: Peter Jones Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/efi/libstub/secureboot.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/firmware/efi/libstub/secureboot.c b/drivers/firmware/efi/libstub/secureboot.c index edba5e7a3743..c8a1ef872e0d 100644 --- a/drivers/firmware/efi/libstub/secureboot.c +++ b/drivers/firmware/efi/libstub/secureboot.c @@ -19,7 +19,7 @@ static const efi_char16_t efi_SetupMode_name[] = L"SetupMode"; /* SHIM variables */ static const efi_guid_t shim_guid = EFI_SHIM_LOCK_GUID; -static const efi_char16_t shim_MokSBState_name[] = L"MokSBState"; +static const efi_char16_t shim_MokSBState_name[] = L"MokSBStateRT"; #define get_efi_var(name, vendor, ...) \ efi_call_runtime(get_variable, \ @@ -58,8 +58,8 @@ enum efi_secureboot_mode efi_get_secureboot(efi_system_table_t *sys_table_arg) /* * See if a user has put the shim into insecure mode. If so, and if the - * variable doesn't have the runtime attribute set, we might as well - * honor that. + * variable doesn't have the non-volatile attribute set, we might as + * well honor that. */ size = sizeof(moksbstate); status = get_efi_var(shim_MokSBState_name, &shim_guid, @@ -68,7 +68,7 @@ enum efi_secureboot_mode efi_get_secureboot(efi_system_table_t *sys_table_arg) /* If it fails, we don't care why. Default to secure */ if (status != EFI_SUCCESS) goto secure_boot_enabled; - if (!(attr & EFI_VARIABLE_RUNTIME_ACCESS) && moksbstate == 1) + if (!(attr & EFI_VARIABLE_NON_VOLATILE) && moksbstate == 1) return efi_secureboot_mode_disabled; secure_boot_enabled: From 016b150992eebc32c4a18f783cf2bb6e2545a3d9 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Wed, 31 Aug 2022 22:54:54 +0800 Subject: [PATCH 061/116] mm/slub: fix to return errno if kmalloc() fails commit 7e9c323c52b379d261a72dc7bd38120a761a93cd upstream. In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to out-of-memory, if it fails, return errno correctly rather than triggering panic via BUG_ON(); kernel BUG at mm/slub.c:5893! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: sysfs_slab_add+0x258/0x260 mm/slub.c:5973 __kmem_cache_create+0x60/0x118 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline] f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149 mount_bdev+0x1b8/0x210 fs/super.c:1400 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512 legacy_get_tree+0x30/0x74 fs/fs_context.c:610 vfs_get_tree+0x40/0x140 fs/super.c:1530 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040 path_mount+0x358/0x914 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568 Cc: Fixes: 81819f0fc8285 ("SLUB core") Reported-by: syzbot+81684812ea68216e08c5@syzkaller.appspotmail.com Reviewed-by: Muchun Song Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Chao Yu Acked-by: David Rientjes Signed-off-by: Vlastimil Babka Signed-off-by: Greg Kroah-Hartman --- mm/slub.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index 5211496f6d24..17e663cf38f6 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5743,7 +5743,8 @@ static char *create_unique_id(struct kmem_cache *s) char *name = kmalloc(ID_STR_LENGTH, GFP_KERNEL); char *p = name; - BUG_ON(!name); + if (!name) + return ERR_PTR(-ENOMEM); *p++ = ':'; /* @@ -5825,6 +5826,8 @@ static int sysfs_slab_add(struct kmem_cache *s) * for the symlinks. */ name = create_unique_id(s); + if (IS_ERR(name)) + return PTR_ERR(name); } s->kobj.kset = kset; From a52ef6ae2842f833e9d2381b811b748d3fed3c50 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 22 Aug 2022 16:45:04 -0700 Subject: [PATCH 062/116] arm64: dts: rockchip: Pull up wlan wake# on Gru-Bob [ Upstream commit e5467359a725de90b6b8d0dd865500f6373828ca ] The Gru-Bob board does not have a pull-up resistor on its WLAN_HOST_WAKE# pin, but Kevin does. The production/vendor kernel specified the pin configuration correctly as a pull-up, but this didn't get ported correctly to upstream. This means Bob's WLAN_HOST_WAKE# pin is floating, causing inconsistent wakeup behavior. Note that bt_host_wake_l has a similar dynamic, but apparently the upstream choice was to redundantly configure both internal and external pull-up on Kevin (see the "Kevin has an external pull up" comment in rk3399-gru.dtsi). This doesn't cause any functional problem, although it's perhaps wasteful. Fixes: 8559bbeeb849 ("arm64: dts: rockchip: add Google Bob") Signed-off-by: Brian Norris Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20220822164453.1.I75c57b48b0873766ec993bdfb7bc1e63da5a1637@changeid Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts | 5 +++++ arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 1 + 2 files changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index a9f4d6d7d2b7..586351340da6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -77,3 +77,8 @@ }; }; }; + +&wlan_host_wake_l { + /* Kevin has an external pull up, but Bob does not. */ + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 7cd6d470c1cb..53185404d3c8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -397,6 +397,7 @@ ap_i2c_tp: &i2c5 { }; wlan_host_wake_l: wlan-host-wake-l { + /* Kevin has an external pull up, but Bob does not */ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; From 312eb4574d16269fceb5ce84f001e5adb4abe08a Mon Sep 17 00:00:00 2001 From: zain wang Date: Tue, 30 Aug 2022 13:16:17 -0700 Subject: [PATCH 063/116] arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz [ Upstream commit 8123437cf46ea5a0f6ca5cb3c528d8b6db97b9c2 ] We've found the AUX channel to be less reliable with PCLK_EDP at a higher rate (typically 25 MHz). This is especially important on systems with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant use of AUX. According to Rockchip, using any rate other than 24 MHz can cause "problems between syncing the PHY an PCLK", which leads to all sorts of unreliabilities around register operations. Fixes: d67a38c5a623 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook") Reviewed-by: Douglas Anderson Signed-off-by: zain wang Signed-off-by: Brian Norris Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4339550553b6@changeid Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 53185404d3c8..7416db3d27a7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -237,6 +237,14 @@ &edp { status = "okay"; + /* + * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only + * set this here, because rk3399-gru.dtsi ensures we can generate this + * off GPLL=600MHz, whereas some other RK3399 boards may not. + */ + assigned-clocks = <&cru PCLK_EDP>; + assigned-clock-rates = <24000000>; + ports { edp_out: port@1 { reg = <1>; From c9355b7e5a6fd87b63adf8d64fc19aeb0e43f4c7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 27 Aug 2022 14:51:39 -0300 Subject: [PATCH 064/116] arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma [ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ] The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 390b86ec6538..365fa9a3c5bf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -102,7 +102,6 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; From 0376a77fa7bc86f6851c03cafeae3a1e9875e5c6 Mon Sep 17 00:00:00 2001 From: Igor Ryzhov Date: Wed, 5 Jun 2019 12:32:40 +0300 Subject: [PATCH 065/116] netfilter: nf_conntrack_sip: fix ct_sip_walk_headers [ Upstream commit 39aebedeaaa95757f5c1f2ddb5f43fdddbf478ca ] ct_sip_next_header and ct_sip_get_header return an absolute value of matchoff, not a shift from current dataoff. So dataoff should be assigned matchoff, not incremented by it. This issue can be seen in the scenario when there are multiple Contact headers and the first one is using a hostname and other headers use IP addresses. In this case, ct_sip_walk_headers will work as follows: The first ct_sip_get_header call to will find the first Contact header but will return -1 as the header uses a hostname. But matchoff will be changed to the offset of this header. After that, dataoff should be set to matchoff, so that the next ct_sip_get_header call find the next Contact header. But instead of assigning dataoff to matchoff, it is incremented by it, which is not correct, as matchoff is an absolute value of the offset. So on the next call to the ct_sip_get_header, dataoff will be incorrect, and the next Contact header may not be found at all. Fixes: 05e3ced297fe ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper") Signed-off-by: Igor Ryzhov Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/netfilter/nf_conntrack_sip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index b83dc9bf0a5d..78fd9122b70c 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -477,7 +477,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr, return ret; if (ret == 0) break; - dataoff += *matchoff; + dataoff = *matchoff; } *in_header = 0; } @@ -489,7 +489,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr, break; if (ret == 0) return ret; - dataoff += *matchoff; + dataoff = *matchoff; } if (in_header) From d0a24bc8e2aa703030d80affa3e5237fe3ad4dd2 Mon Sep 17 00:00:00 2001 From: David Leadbeater Date: Fri, 26 Aug 2022 14:56:57 +1000 Subject: [PATCH 066/116] netfilter: nf_conntrack_irc: Tighten matching on DCC message [ Upstream commit e8d5dfd1d8747b56077d02664a8838c71ced948e ] CTCP messages should only be at the start of an IRC message, not anywhere within it. While the helper only decodes packes in the ORIGINAL direction, its possible to make a client send a CTCP message back by empedding one into a PING request. As-is, thats enough to make the helper believe that it saw a CTCP message. Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port") Signed-off-by: David Leadbeater Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/netfilter/nf_conntrack_irc.c | 34 ++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c index 26245419ef4a..65b5b05fe38d 100644 --- a/net/netfilter/nf_conntrack_irc.c +++ b/net/netfilter/nf_conntrack_irc.c @@ -148,15 +148,37 @@ static int help(struct sk_buff *skb, unsigned int protoff, data = ib_ptr; data_limit = ib_ptr + skb->len - dataoff; - /* strlen("\1DCC SENT t AAAAAAAA P\1\n")=24 - * 5+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=14 */ - while (data < data_limit - (19 + MINMATCHLEN)) { - if (memcmp(data, "\1DCC ", 5)) { + /* Skip any whitespace */ + while (data < data_limit - 10) { + if (*data == ' ' || *data == '\r' || *data == '\n') + data++; + else + break; + } + + /* strlen("PRIVMSG x ")=10 */ + if (data < data_limit - 10) { + if (strncasecmp("PRIVMSG ", data, 8)) + goto out; + data += 8; + } + + /* strlen(" :\1DCC SENT t AAAAAAAA P\1\n")=26 + * 7+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=26 + */ + while (data < data_limit - (21 + MINMATCHLEN)) { + /* Find first " :", the start of message */ + if (memcmp(data, " :", 2)) { data++; continue; } + data += 2; + + /* then check that place only for the DCC command */ + if (memcmp(data, "\1DCC ", 5)) + goto out; data += 5; - /* we have at least (19+MINMATCHLEN)-5 bytes valid data left */ + /* we have at least (21+MINMATCHLEN)-(2+5) bytes valid data left */ iph = ip_hdr(skb); pr_debug("DCC found in master %pI4:%u %pI4:%u\n", @@ -172,7 +194,7 @@ static int help(struct sk_buff *skb, unsigned int protoff, pr_debug("DCC %s detected\n", dccprotos[i]); /* we have at least - * (19+MINMATCHLEN)-5-dccprotos[i].matchlen bytes valid + * (21+MINMATCHLEN)-7-dccprotos[i].matchlen bytes valid * data left (== 14/13 bytes) */ if (parse_dcc(data, data_limit, &dcc_ip, &dcc_port, &addr_beg_p, &addr_end_p)) { From 721ea8ac063d70c2078c4e762212705de6151764 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 7 Sep 2022 10:26:18 +0200 Subject: [PATCH 067/116] netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find() [ Upstream commit 559c36c5a8d730c49ef805a72b213d3bba155cc8 ] nf_osf_find() incorrectly returns true on mismatch, this leads to copying uninitialized memory area in nft_osf which can be used to leak stale kernel stack data to userspace. Fixes: 22c7652cdaa8 ("netfilter: nft_osf: Add version option support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/netfilter/nfnetlink_osf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink_osf.c b/net/netfilter/nfnetlink_osf.c index 79fbf37291f3..51e3953b414c 100644 --- a/net/netfilter/nfnetlink_osf.c +++ b/net/netfilter/nfnetlink_osf.c @@ -269,6 +269,7 @@ bool nf_osf_find(const struct sk_buff *skb, struct nf_osf_hdr_ctx ctx; const struct tcphdr *tcp; struct tcphdr _tcph; + bool found = false; memset(&ctx, 0, sizeof(ctx)); @@ -283,10 +284,11 @@ bool nf_osf_find(const struct sk_buff *skb, data->genre = f->genre; data->version = f->version; + found = true; break; } - return true; + return found; } EXPORT_SYMBOL_GPL(nf_osf_find); From b84fdb6be10515e0d3a01cd07fbe9ddaf27c8483 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Thu, 1 Sep 2022 16:34:40 +0200 Subject: [PATCH 068/116] iavf: Fix cached head and tail value for iavf_get_tx_pending [ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ] The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley Co-developed-by: Norbert Zulinski Signed-off-by: Norbert Zulinski Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/iavf/iavf_txrx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c index c6905d1b6182..ce2f6d1ca79f 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c +++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c @@ -114,8 +114,11 @@ u32 iavf_get_tx_pending(struct iavf_ring *ring, bool in_sw) { u32 head, tail; + /* underlying hardware might not allow access and/or always return + * 0 for the head/tail registers so just use the cached values + */ head = ring->next_to_clean; - tail = readl(ring->tail); + tail = ring->next_to_use; if (head != tail) return (head < tail) ? From 346e94aa4a99378592c46d6a34c72703a32bd5be Mon Sep 17 00:00:00 2001 From: Lu Wei Date: Wed, 7 Sep 2022 18:12:04 +0800 Subject: [PATCH 069/116] ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header [ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ] If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Lu Wei Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ipvlan/ipvlan_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index 8801d093135c..a33149ee0ddc 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -496,7 +496,6 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb) static int ipvlan_process_outbound(struct sk_buff *skb) { - struct ethhdr *ethh = eth_hdr(skb); int ret = NET_XMIT_DROP; /* The ipvlan is a pseudo-L2 device, so the packets that we receive @@ -506,6 +505,8 @@ static int ipvlan_process_outbound(struct sk_buff *skb) if (skb_mac_header_was_set(skb)) { /* In this mode we dont care about * multicast and broadcast traffic */ + struct ethhdr *ethh = eth_hdr(skb); + if (is_multicast_ether_addr(ethh->h_dest)) { pr_debug_ratelimited( "Dropped {multi|broad}cast of type=[%x]\n", @@ -590,7 +591,7 @@ out: static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev) { const struct ipvl_dev *ipvlan = netdev_priv(dev); - struct ethhdr *eth = eth_hdr(skb); + struct ethhdr *eth = skb_eth_hdr(skb); struct ipvl_addr *addr; void *lyr3h; int addr_type; @@ -620,6 +621,7 @@ static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev) return dev_forward_skb(ipvlan->phy_dev, skb); } else if (is_multicast_ether_addr(eth->h_dest)) { + skb_reset_mac_header(skb); ipvlan_skb_crossing_ns(skb, NULL); ipvlan_multicast_enqueue(ipvlan->port, skb, true); return NET_XMIT_SUCCESS; From 37f79374bba413c5fcce8140bb6ead4c92ac6037 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Wed, 7 Sep 2022 16:56:41 +0900 Subject: [PATCH 070/116] net: team: Unsync device addresses on ndo_stop [ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ] Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/team/team.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 0eb894b7c0bd..da74ec778b6e 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1270,10 +1270,12 @@ static int team_port_add(struct team *team, struct net_device *port_dev, } } - netif_addr_lock_bh(dev); - dev_uc_sync_multiple(port_dev, dev); - dev_mc_sync_multiple(port_dev, dev); - netif_addr_unlock_bh(dev); + if (dev->flags & IFF_UP) { + netif_addr_lock_bh(dev); + dev_uc_sync_multiple(port_dev, dev); + dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); + } port->index = -1; list_add_tail_rcu(&port->list, &team->port_list); @@ -1344,8 +1346,10 @@ static int team_port_del(struct team *team, struct net_device *port_dev) netdev_rx_handler_unregister(port_dev); team_port_disable_netpoll(port); vlan_vids_del_by_dev(port_dev, dev); - dev_uc_unsync(port_dev, dev); - dev_mc_unsync(port_dev, dev); + if (dev->flags & IFF_UP) { + dev_uc_unsync(port_dev, dev); + dev_mc_unsync(port_dev, dev); + } dev_close(port_dev); team_port_leave(team, port); @@ -1694,6 +1698,14 @@ static int team_open(struct net_device *dev) static int team_close(struct net_device *dev) { + struct team *team = netdev_priv(dev); + struct team_port *port; + + list_for_each_entry(port, &team->port_list, list) { + dev_uc_unsync(port->dev, dev); + dev_mc_unsync(port->dev, dev); + } + return 0; } From 405bd0ebb00c34b38983b7ba2808a6d4abe32947 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 17 Sep 2022 16:25:40 -0700 Subject: [PATCH 071/116] MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko [ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ] The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error: ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined! Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Thomas Bogendoerfer Cc: John Crispin Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/lantiq/clk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index 7a623684d9b5..2d5a0bcb0cec 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -50,6 +50,7 @@ struct clk *clk_get_io(void) { return &cpu_clk_generic[2]; } +EXPORT_SYMBOL_GPL(clk_get_io); struct clk *clk_get_ppe(void) { From 9bf52411eeaa2b75e16ac08132cd61bc9356ff97 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Mon, 12 Sep 2022 00:10:09 +0800 Subject: [PATCH 072/116] MIPS: Loongson32: Fix PHY-mode being left unspecified [ Upstream commit e9f3f8f488005f6da3cfb66070706770ecaef747 ] commit 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") has changed the plat->interface field semantics from containing the PHY-mode to specifying the MAC-PCS interface mode. Due to that the loongson32 platform code will leave the phylink interface uninitialized with the PHY-mode intended by the means of the actual platform setup. The commit-author most likely has just missed the arch-specific code to fix. Let's mend the Loongson32 platform code then by assigning the PHY-mode to the phy_interface field of the STMMAC platform data. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Serge Semin Signed-off-by: Keguang Zhang Tested-by: Keguang Zhang Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/loongson32/common/platform.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c index 794c96c2a4cd..311dc1580bbd 100644 --- a/arch/mips/loongson32/common/platform.c +++ b/arch/mips/loongson32/common/platform.c @@ -98,7 +98,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) if (plat_dat->bus_id) { __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 | GMAC1_USE_UART0, LS1X_MUX_CTRL0); - switch (plat_dat->interface) { + switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23); break; @@ -107,12 +107,12 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) break; default: pr_err("unsupported mii mode %d\n", - plat_dat->interface); + plat_dat->phy_interface); return -ENOTSUPP; } val &= ~GMAC1_SHUT; } else { - switch (plat_dat->interface) { + switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01); break; @@ -121,7 +121,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) break; default: pr_err("unsupported mii mode %d\n", - plat_dat->interface); + plat_dat->phy_interface); return -ENOTSUPP; } val &= ~GMAC0_SHUT; @@ -131,7 +131,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) plat_dat = dev_get_platdata(&pdev->dev); val &= ~PHY_INTF_SELI; - if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) + if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII) val |= 0x4 << PHY_INTF_SELI_SHIFT; __raw_writel(val, LS1X_MUX_CTRL1); @@ -146,9 +146,9 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = { .bus_id = 0, .phy_addr = -1, #if defined(CONFIG_LOONGSON1_LS1B) - .interface = PHY_INTERFACE_MODE_MII, + .phy_interface = PHY_INTERFACE_MODE_MII, #elif defined(CONFIG_LOONGSON1_LS1C) - .interface = PHY_INTERFACE_MODE_RMII, + .phy_interface = PHY_INTERFACE_MODE_RMII, #endif .mdio_bus_data = &ls1x_mdio_bus_data, .dma_cfg = &ls1x_eth_dma_cfg, @@ -186,7 +186,7 @@ struct platform_device ls1x_eth0_pdev = { static struct plat_stmmacenet_data ls1x_eth1_pdata = { .bus_id = 1, .phy_addr = -1, - .interface = PHY_INTERFACE_MODE_MII, + .phy_interface = PHY_INTERFACE_MODE_MII, .mdio_bus_data = &ls1x_mdio_bus_data, .dma_cfg = &ls1x_eth_dma_cfg, .has_gmac = 1, From bfaff9adaa89d7cb410529c1e39a99dd1808c19d Mon Sep 17 00:00:00 2001 From: Norbert Zulinski Date: Wed, 14 Sep 2022 15:39:13 +0200 Subject: [PATCH 073/116] iavf: Fix bad page state [ Upstream commit 66039eb9015eee4f7ff0c99b83c65c7ecb3c8190 ] Fix bad page state, free inappropriate page in handling dummy descriptor. iavf_build_skb now has to check not only if rx_buffer is NULL but also if size is zero, same thing in iavf_clean_rx_irq. Without this patch driver would free page that will be used by napi_build_skb. Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors") Signed-off-by: Norbert Zulinski Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/iavf/iavf_txrx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c index ce2f6d1ca79f..1f7b842c6763 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c +++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c @@ -1374,7 +1374,7 @@ static struct sk_buff *iavf_build_skb(struct iavf_ring *rx_ring, #endif struct sk_buff *skb; - if (!rx_buffer) + if (!rx_buffer || !size) return NULL; /* prefetch first cache line of first page */ va = page_address(rx_buffer->page) + rx_buffer->page_offset; @@ -1534,7 +1534,7 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget) /* exit if we failed to retrieve a buffer */ if (!skb) { rx_ring->rx_stats.alloc_buff_failed++; - if (rx_buffer) + if (rx_buffer && size) rx_buffer->pagecnt_bias++; break; } From 3daf097819822ef7f5bba8a32ae0fea184e55d49 Mon Sep 17 00:00:00 2001 From: Michal Jaron Date: Tue, 13 Sep 2022 15:38:35 +0200 Subject: [PATCH 074/116] iavf: Fix set max MTU size with port VLAN and jumbo frames [ Upstream commit 399c98c4dc50b7eb7e9f24da7ffdda6f025676ef ] After setting port VLAN and MTU to 9000 on VF with ice driver there was an iavf error "PF returned error -5 (IAVF_ERR_PARAM) to our request 6". During queue configuration, VF's max packet size was set to IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN due to making some space for port VLAN as VF is not aware whether it's in a port VLAN. This mismatch in sizes caused ice to reject queue configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF to VF with GET_VF_RESOURCES msg but VF does not look at this. In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu received from pf with GET_VF_RESOURCES msg to make vf's max_frame_size dependent from pf. Add check if received max_mtu is not in eligible range then set it to IAVF_MAX_RXBUFFER. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c index 4d471a6f2946..7a17694b6a0b 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c +++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c @@ -241,11 +241,14 @@ out: void iavf_configure_queues(struct iavf_adapter *adapter) { struct virtchnl_vsi_queue_config_info *vqci; - struct virtchnl_queue_pair_info *vqpi; + int i, max_frame = adapter->vf_res->max_mtu; int pairs = adapter->num_active_queues; - int i, max_frame = IAVF_MAX_RXBUFFER; + struct virtchnl_queue_pair_info *vqpi; size_t len; + if (max_frame > IAVF_MAX_RXBUFFER || !max_frame) + max_frame = IAVF_MAX_RXBUFFER; + if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { /* bail because we already have a command pending */ dev_err(&adapter->pdev->dev, "Cannot configure queues, command %d pending\n", From 450d106804fff5269b54f82450861b9c1b91a5a7 Mon Sep 17 00:00:00 2001 From: Michal Jaron Date: Tue, 13 Sep 2022 15:38:36 +0200 Subject: [PATCH 075/116] i40e: Fix VF set max MTU size [ Upstream commit 372539def2824c43b6afe2403045b140f65c5acc ] Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- .../ethernet/intel/i40e/i40e_virtchnl_pf.c | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 4080fdacca4c..16f5baafbbd5 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1873,6 +1873,25 @@ static void i40e_del_qch(struct i40e_vf *vf) } } +/** + * i40e_vc_get_max_frame_size + * @vf: pointer to the VF + * + * Max frame size is determined based on the current port's max frame size and + * whether a port VLAN is configured on this VF. The VF is not aware whether + * it's in a port VLAN so the PF needs to account for this in max frame size + * checks and sending the max frame size to the VF. + **/ +static u16 i40e_vc_get_max_frame_size(struct i40e_vf *vf) +{ + u16 max_frame_size = vf->pf->hw.phy.link_info.max_frame_size; + + if (vf->port_vlan_id) + max_frame_size -= VLAN_HLEN; + + return max_frame_size; +} + /** * i40e_vc_get_vf_resources_msg * @vf: pointer to the VF info @@ -1973,6 +1992,7 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg) vfres->max_vectors = pf->hw.func_caps.num_msix_vectors_vf; vfres->rss_key_size = I40E_HKEY_ARRAY_SIZE; vfres->rss_lut_size = I40E_VF_HLUT_ARRAY_SIZE; + vfres->max_mtu = i40e_vc_get_max_frame_size(vf); if (vf->lan_vsi_idx) { vfres->vsi_res[0].vsi_id = vf->lan_vsi_id; From d2ac2baf1fc47313b72d0a9205c1d0837b3d23c7 Mon Sep 17 00:00:00 2001 From: Michal Jaron Date: Thu, 1 Sep 2022 09:49:33 +0200 Subject: [PATCH 076/116] i40e: Fix set max_tx_rate when it is lower than 1 Mbps [ Upstream commit 198eb7e1b81d8ba676d0f4f120c092032ae69a8e ] While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron Signed-off-by: Andrii Staikov Tested-by: Bharathi Sreenivas Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/i40e/i40e_main.c | 32 +++++++++++++++++---- 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 2d01eaeb703a..15f177185d71 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5638,6 +5638,26 @@ static int i40e_get_link_speed(struct i40e_vsi *vsi) } } +/** + * i40e_bw_bytes_to_mbits - Convert max_tx_rate from bytes to mbits + * @vsi: Pointer to vsi structure + * @max_tx_rate: max TX rate in bytes to be converted into Mbits + * + * Helper function to convert units before send to set BW limit + **/ +static u64 i40e_bw_bytes_to_mbits(struct i40e_vsi *vsi, u64 max_tx_rate) +{ + if (max_tx_rate < I40E_BW_MBPS_DIVISOR) { + dev_warn(&vsi->back->pdev->dev, + "Setting max tx rate to minimum usable value of 50Mbps.\n"); + max_tx_rate = I40E_BW_CREDIT_DIVISOR; + } else { + do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); + } + + return max_tx_rate; +} + /** * i40e_set_bw_limit - setup BW limit for Tx traffic based on max_tx_rate * @vsi: VSI to be configured @@ -5660,10 +5680,10 @@ int i40e_set_bw_limit(struct i40e_vsi *vsi, u16 seid, u64 max_tx_rate) max_tx_rate, seid); return -EINVAL; } - if (max_tx_rate && max_tx_rate < 50) { + if (max_tx_rate && max_tx_rate < I40E_BW_CREDIT_DIVISOR) { dev_warn(&pf->pdev->dev, "Setting max tx rate to minimum usable value of 50Mbps.\n"); - max_tx_rate = 50; + max_tx_rate = I40E_BW_CREDIT_DIVISOR; } /* Tx rate credits are in values of 50Mbps, 0 is disabled */ @@ -7591,9 +7611,9 @@ config_tc: if (pf->flags & I40E_FLAG_TC_MQPRIO) { if (vsi->mqprio_qopt.max_rate[0]) { - u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0]; + u64 max_tx_rate = i40e_bw_bytes_to_mbits(vsi, + vsi->mqprio_qopt.max_rate[0]); - do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate); if (!ret) { u64 credits = max_tx_rate; @@ -10247,10 +10267,10 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) } if (vsi->mqprio_qopt.max_rate[0]) { - u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0]; + u64 max_tx_rate = i40e_bw_bytes_to_mbits(vsi, + vsi->mqprio_qopt.max_rate[0]); u64 credits = 0; - do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate); if (ret) goto end_unlock; From 420c9b10737bc60898a9d11b0a84a9a89fc00057 Mon Sep 17 00:00:00 2001 From: Liang He Date: Tue, 13 Sep 2022 20:56:59 +0800 Subject: [PATCH 077/116] of: mdio: Add of_node_put() when breaking out of for_each_xx [ Upstream commit 1c48709e6d9d353acaaac1d8e33474756b121d78 ] In of_mdiobus_register(), we should call of_node_put() for 'child' escaped out of for_each_available_child_of_node(). Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Co-developed-by: Miaoqian Lin Signed-off-by: Miaoqian Lin Signed-off-by: Liang He Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/of/of_mdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 26ddb4cc675a..7a3de2b5de0c 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -281,6 +281,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) return 0; unregister: + of_node_put(child); mdiobus_unregister(mdio); return rc; } From d12a1eb07003e597077329767c6aa86a7e972c76 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 15 Sep 2022 13:08:01 +0300 Subject: [PATCH 078/116] net/sched: taprio: avoid disabling offload when it was never enabled [ Upstream commit db46e3a88a09c5cf7e505664d01da7238cd56c92 ] In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vladimir Oltean Reviewed-by: Vinicius Costa Gomes Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/sched/sch_taprio.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index 4c26f7fb32b3..842ccdcc0db2 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -65,6 +65,7 @@ struct taprio_sched { u32 flags; enum tk_offsets tk_offset; int clockid; + bool offloaded; atomic64_t picos_per_byte; /* Using picoseconds because for 10Gbps+ * speeds it's sub-nanoseconds per byte */ @@ -1268,6 +1269,8 @@ static int taprio_enable_offload(struct net_device *dev, goto done; } + q->offloaded = true; + done: taprio_offload_free(offload); @@ -1282,12 +1285,9 @@ static int taprio_disable_offload(struct net_device *dev, struct tc_taprio_qopt_offload *offload; int err; - if (!FULL_OFFLOAD_IS_ENABLED(q->flags)) + if (!q->offloaded) return 0; - if (!ops->ndo_setup_tc) - return -EOPNOTSUPP; - offload = taprio_offload_alloc(0); if (!offload) { NL_SET_ERR_MSG(extack, @@ -1303,6 +1303,8 @@ static int taprio_disable_offload(struct net_device *dev, goto out; } + q->offloaded = false; + out: taprio_offload_free(offload); From 6a3239f806829ab2bed7bf91df410fc0fe92949a Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Thu, 15 Sep 2022 13:08:02 +0300 Subject: [PATCH 079/116] net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs [ Upstream commit 1461d212ab277d8bba1a753d33e9afe03d81f9d4 ] taprio can only operate as root qdisc, and to that end, there exists the following check in taprio_init(), just as in mqprio: if (sch->parent != TC_H_ROOT) return -EOPNOTSUPP; And indeed, when we try to attach taprio to an mqprio child, it fails as expected: $ tc qdisc add dev swp0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:2 taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Error: sch_taprio: Can only be attached as root qdisc. (extack message added by me) But when we try to attach a taprio child to a taprio root qdisc, surprisingly it doesn't fail: $ tc qdisc replace dev swp0 root handle 1: taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI $ tc qdisc replace dev swp0 parent 1:2 taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI This is because tc_modify_qdisc() behaves differently when mqprio is root, vs when taprio is root. In the mqprio case, it finds the parent qdisc through p = qdisc_lookup(dev, TC_H_MAJ(clid)), and then the child qdisc through q = qdisc_leaf(p, clid). This leaf qdisc q has handle 0, so it is ignored according to the comment right below ("It may be default qdisc, ignore it"). As a result, tc_modify_qdisc() goes through the qdisc_create() code path, and this gives taprio_init() a chance to check for sch_parent != TC_H_ROOT and error out. Whereas in the taprio case, the returned q = qdisc_leaf(p, clid) is different. It is not the default qdisc created for each netdev queue (both taprio and mqprio call qdisc_create_dflt() and keep them in a private q->qdiscs[], or priv->qdiscs[], respectively). Instead, taprio makes qdisc_leaf() return the _root_ qdisc, aka itself. When taprio does that, tc_modify_qdisc() goes through the qdisc_change() code path, because the qdisc layer never finds out about the child qdisc of the root. And through the ->change() ops, taprio has no reason to check whether its parent is root or not, just through ->init(), which is not called. The problem is the taprio_leaf() implementation. Even though code wise, it does the exact same thing as mqprio_leaf() which it is copied from, it works with different input data. This is because mqprio does not attach itself (the root) to each device TX queue, but one of the default qdiscs from its private array. In fact, since commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), taprio does this too, but just for the full offload case. So if we tried to attach a taprio child to a fully offloaded taprio root qdisc, it would properly fail too; just not to a software root taprio. To fix the problem, stop looking at the Qdisc that's attached to the TX queue, and instead, always return the default qdiscs that we've allocated (and to which we privately enqueue and dequeue, in software scheduling mode). Since Qdisc_class_ops :: leaf is only called from tc_modify_qdisc(), the risk of unforeseen side effects introduced by this change is minimal. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vladimir Oltean Reviewed-by: Vinicius Costa Gomes Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/sched/sch_taprio.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index 842ccdcc0db2..506ebae1f72c 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -1906,12 +1906,14 @@ start_error: static struct Qdisc *taprio_leaf(struct Qdisc *sch, unsigned long cl) { - struct netdev_queue *dev_queue = taprio_queue_get(sch, cl); + struct taprio_sched *q = qdisc_priv(sch); + struct net_device *dev = qdisc_dev(sch); + unsigned int ntx = cl - 1; - if (!dev_queue) + if (ntx >= dev->num_tx_queues) return NULL; - return dev_queue->qdisc_sleeping; + return q->qdiscs[ntx]; } static unsigned long taprio_find(struct Qdisc *sch, u32 classid) From 11ebf32fde46572b0aaf3c2bdd97d923ef5a03ab Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 20 Sep 2022 14:20:17 +0200 Subject: [PATCH 080/116] netfilter: ebtables: fix memory leak when blob is malformed [ Upstream commit 62ce44c4fff947eebdf10bb582267e686e6835c9 ] The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this. Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points") Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/bridge/netfilter/ebtables.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index ddb988c339c1..f6853fc0fcc0 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -999,8 +999,10 @@ static int do_replace_finish(struct net *net, struct ebt_replace *repl, goto free_iterate; } - if (repl->valid_hooks != t->valid_hooks) + if (repl->valid_hooks != t->valid_hooks) { + ret = -EINVAL; goto free_unlock; + } if (repl->num_counters && repl->num_counters != t->private->nentries) { ret = -EINVAL; From 95c5637d3d1fbc100397b27478172a8549f97b2b Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 20 Sep 2022 11:40:56 +0200 Subject: [PATCH 081/116] can: gs_usb: gs_can_open(): fix race dev->can.state condition [ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ] The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned. Assign dev->can.state before starting the controller to close the race window. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin --- drivers/net/can/usb/gs_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index bf4ab30186af..abd2a57b18cb 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -678,6 +678,7 @@ static int gs_can_open(struct net_device *netdev) flags |= GS_CAN_MODE_TRIPLE_SAMPLE; /* finally start device */ + dev->can.state = CAN_STATE_ERROR_ACTIVE; dm->mode = cpu_to_le32(GS_CAN_MODE_START); dm->flags = cpu_to_le32(flags); rc = usb_control_msg(interface_to_usbdev(dev->iface), @@ -694,13 +695,12 @@ static int gs_can_open(struct net_device *netdev) if (rc < 0) { netdev_err(netdev, "Couldn't start device (err=%d)\n", rc); kfree(dm); + dev->can.state = CAN_STATE_STOPPED; return rc; } kfree(dm); - dev->can.state = CAN_STATE_ERROR_ACTIVE; - parent->active_channels++; if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) netif_start_queue(netdev); From 80b2f37b3370c505b03544b5efc895514f673cf3 Mon Sep 17 00:00:00 2001 From: Lieven Hey Date: Thu, 15 Sep 2022 11:29:10 +0200 Subject: [PATCH 082/116] perf jit: Include program header in ELF files [ Upstream commit babd04386b1df8c364cdaa39ac0e54349502e1e5 ] The missing header makes it hard for programs like elfutils to open these files. Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan Signed-off-by: Lieven Hey Tested-by: Leo Yan Cc: Leo Yan Link: https://lore.kernel.org/r/20220915092910.711036-1-lieven.hey@kdab.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/genelf.c | 14 ++++++++++++++ tools/perf/util/genelf.h | 4 ++++ 2 files changed, 18 insertions(+) diff --git a/tools/perf/util/genelf.c b/tools/perf/util/genelf.c index 17b74aba8b9a..69744fd5db39 100644 --- a/tools/perf/util/genelf.c +++ b/tools/perf/util/genelf.c @@ -256,6 +256,7 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym, Elf_Data *d; Elf_Scn *scn; Elf_Ehdr *ehdr; + Elf_Phdr *phdr; Elf_Shdr *shdr; uint64_t eh_frame_base_offset; char *strsym = NULL; @@ -290,6 +291,19 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym, ehdr->e_version = EV_CURRENT; ehdr->e_shstrndx= unwinding ? 4 : 2; /* shdr index for section name */ + /* + * setup program header + */ + phdr = elf_newphdr(e, 1); + phdr[0].p_type = PT_LOAD; + phdr[0].p_offset = 0; + phdr[0].p_vaddr = 0; + phdr[0].p_paddr = 0; + phdr[0].p_filesz = csize; + phdr[0].p_memsz = csize; + phdr[0].p_flags = PF_X | PF_R; + phdr[0].p_align = 8; + /* * setup text section */ diff --git a/tools/perf/util/genelf.h b/tools/perf/util/genelf.h index d4137559be05..ac638945b4cb 100644 --- a/tools/perf/util/genelf.h +++ b/tools/perf/util/genelf.h @@ -50,8 +50,10 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent #if GEN_ELF_CLASS == ELFCLASS64 #define elf_newehdr elf64_newehdr +#define elf_newphdr elf64_newphdr #define elf_getshdr elf64_getshdr #define Elf_Ehdr Elf64_Ehdr +#define Elf_Phdr Elf64_Phdr #define Elf_Shdr Elf64_Shdr #define Elf_Sym Elf64_Sym #define ELF_ST_TYPE(a) ELF64_ST_TYPE(a) @@ -59,8 +61,10 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent #define ELF_ST_VIS(a) ELF64_ST_VISIBILITY(a) #else #define elf_newehdr elf32_newehdr +#define elf_newphdr elf32_newphdr #define elf_getshdr elf32_getshdr #define Elf_Ehdr Elf32_Ehdr +#define Elf_Phdr Elf32_Phdr #define Elf_Shdr Elf32_Shdr #define Elf_Sym Elf32_Sym #define ELF_ST_TYPE(a) ELF32_ST_TYPE(a) From 67199c26a006ec999a5030d653eb3e229831f84a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 14 Sep 2022 15:24:29 +0300 Subject: [PATCH 083/116] perf kcore_copy: Do not check /proc/modules is unchanged [ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ] /proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao Signed-off-by: Adrian Hunter Tested-by: Daniel Dao Acked-by: Namhyung Kim Cc: Ian Rogers Cc: Jiri Olsa Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/symbol-elf.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index a04a7dfb8ec0..f15258fbe9db 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -1912,8 +1912,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir, * unusual. One significant peculiarity is that the mapping (start -> pgoff) * is not the same for the kernel map and the modules map. That happens because * the data is copied adjacently whereas the original kcore has gaps. Finally, - * kallsyms and modules files are compared with their copies to check that - * modules have not been loaded or unloaded while the copies were taking place. + * kallsyms file is compared with its copy to check that modules have not been + * loaded or unloaded while the copies were taking place. * * Return: %0 on success, %-1 on failure. */ @@ -1976,9 +1976,6 @@ int kcore_copy(const char *from_dir, const char *to_dir) goto out_extract_close; } - if (kcore_copy__compare_file(from_dir, to_dir, "modules")) - goto out_extract_close; - if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms")) goto out_extract_close; From 0e8de8f54b04fa3a179ca34f6f18a1a5a569f435 Mon Sep 17 00:00:00 2001 From: Sean Anderson Date: Tue, 20 Sep 2022 19:50:18 -0400 Subject: [PATCH 084/116] net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD [ Upstream commit 878e2405710aacfeeb19364c300f38b7a9abfe8f ] There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet. To reproduce this problem, ping a HME with a payload size between 17 and 214 $ ping -s 17 which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sean Anderson Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/sun/sunhme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index 3133f903279c..dbbbb6ea9f2b 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -2064,9 +2064,9 @@ static void happy_meal_rx(struct happy_meal *hp, struct net_device *dev) skb_reserve(copy_skb, 2); skb_put(copy_skb, len); - dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE); + dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE); skb_copy_from_linear_data(skb, copy_skb->data, len); - dma_sync_single_for_device(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE); + dma_sync_single_for_device(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE); /* Reuse original ring buffer. */ hme_write_rxd(hp, this, (RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)), From 903f7d322c17d8e306d766404b4604e81653902a Mon Sep 17 00:00:00 2001 From: Hangyu Hua Date: Wed, 21 Sep 2022 17:27:34 +0800 Subject: [PATCH 085/116] net: sched: fix possible refcount leak in tc_new_tfilter() [ Upstream commit c2e1cfefcac35e0eea229e148c8284088ce437b5 ] tfilter_put need to be called to put the refount got by tp->ops->get to avoid possible refcount leak when chain->tmplt_ops != NULL and chain->tmplt_ops != tp->ops. Fixes: 7d5509fa0d3d ("net: sched: extend proto ops with 'put' callback") Signed-off-by: Hangyu Hua Reviewed-by: Vlad Buslov Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/sched/cls_api.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 919c7fa5f02d..48a8c7daa635 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -2098,6 +2098,7 @@ replay: } if (chain->tmplt_ops && chain->tmplt_ops != tp->ops) { + tfilter_put(tp, fh); NL_SET_ERR_MSG(extack, "Chain template is set to a different filter kind"); err = -EINVAL; goto errout; From 556e827b0f63a7ca5b4029fd84c6bf9c11390f20 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 1 Sep 2022 17:39:32 +0300 Subject: [PATCH 086/116] serial: Create uart_xmit_advance() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit e77cab77f2cb3a1ca2ba8df4af45bb35617ac16d upstream. A very common pattern in the drivers is to advance xmit tail index and do bookkeeping of Tx'ed characters. Create uart_xmit_advance() to handle it. Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 2b78cc734719..10f209d54f18 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -297,6 +297,23 @@ struct uart_state { /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 +/** + * uart_xmit_advance - Advance xmit buffer and account Tx'ed chars + * @up: uart_port structure describing the port + * @chars: number of characters sent + * + * This function advances the tail of circular xmit buffer by the number of + * @chars transmitted and handles accounting of transmitted bytes (into + * @up's icount.tx). + */ +static inline void uart_xmit_advance(struct uart_port *up, unsigned int chars) +{ + struct circ_buf *xmit = &up->state->xmit; + + xmit->tail = (xmit->tail + chars) & (UART_XMIT_SIZE - 1); + up->icount.tx += chars; +} + struct module; struct tty_driver; From 6cc0434f9d44eae6e6b4d334a7837f9e883de97e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 1 Sep 2022 17:39:33 +0300 Subject: [PATCH 087/116] serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream. DMA complete & stop paths did not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Cc: # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 74c21152367a..c5f43cd39664 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -519,7 +519,7 @@ static void tegra_uart_tx_dma_complete(void *args) count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); spin_lock_irqsave(&tup->uport.lock, flags); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(&tup->uport, count); tup->tx_in_progress = 0; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&tup->uport); @@ -606,7 +606,6 @@ static unsigned int tegra_uart_tx_empty(struct uart_port *u) static void tegra_uart_stop_tx(struct uart_port *u) { struct tegra_uart_port *tup = to_tegra_uport(u); - struct circ_buf *xmit = &tup->uport.state->xmit; struct dma_tx_state state; unsigned int count; @@ -617,7 +616,7 @@ static void tegra_uart_stop_tx(struct uart_port *u) dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(&tup->uport, count); tup->tx_in_progress = 0; } From 9eb710d1843aeef8166a5a23bd7e374c584375ae Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 1 Sep 2022 17:39:34 +0300 Subject: [PATCH 088/116] serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 1d10cd4da593bc0196a239dcc54dac24b6b0a74e upstream. Tx'ing does not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: 2d908b38d409 ("serial: Add Tegra Combined UART driver") Cc: # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220901143934.8850-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/tegra-tcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c index aaf8748a6147..31ae705aa38b 100644 --- a/drivers/tty/serial/tegra-tcu.c +++ b/drivers/tty/serial/tegra-tcu.c @@ -101,7 +101,7 @@ static void tegra_tcu_uart_start_tx(struct uart_port *port) break; tegra_tcu_write(tcu, &xmit->buf[xmit->tail], count); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(port, count); } uart_write_wakeup(port); From 2e473351400e3dd66f0b71eddcef82ee45a584c1 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Mon, 19 Sep 2022 17:49:31 +0200 Subject: [PATCH 089/116] s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup commit db7ba07108a48c0f95b74fabbfd5d63e924f992d upstream. Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL. The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held. Fix by checking the pavgroup pointer with lcu->lock held. Cc: # 2.6.25+ Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- drivers/s390/block/dasd_alias.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index dc78a523a69f..b6b938aa6615 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -675,12 +675,12 @@ int dasd_alias_remove_device(struct dasd_device *device) struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) { struct dasd_eckd_private *alias_priv, *private = base_device->private; - struct alias_pav_group *group = private->pavgroup; struct alias_lcu *lcu = private->lcu; struct dasd_device *alias_device; + struct alias_pav_group *group; unsigned long flags; - if (!group || !lcu) + if (!lcu) return NULL; if (lcu->pav == NO_PAV || lcu->flags & (NEED_UAC_UPDATE | UPDATE_PENDING)) @@ -697,6 +697,11 @@ struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) } spin_lock_irqsave(&lcu->lock, flags); + group = private->pavgroup; + if (!group) { + spin_unlock_irqrestore(&lcu->lock, flags); + return NULL; + } alias_device = group->next; if (!alias_device) { if (list_empty(&group->aliaslist)) { From 1438e412aeda2db2edde26f4d46c67a2f333fe53 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Tue, 17 Aug 2021 16:36:25 +0800 Subject: [PATCH 090/116] usb: xhci-mtk: fix issue of out-of-bounds array access commit de5107f473190538a65aac7edea85209cd5c1a8f upstream. Bus bandwidth array access is based on esit, increase one will cause out-of-bounds issue; for example, when esit is XHCI_MTK_MAX_ESIT, will overstep boundary. Fixes: 7c986fbc16ae ("usb: xhci-mtk: get the microframe boundary for ESIT") Cc: Reported-by: Stan Lu Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1629189389-18779-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mtk-sch.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 4a7b200674ea..86c4bc9df3b8 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -539,10 +539,12 @@ static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep) u32 boundary = sch_ep->esit; if (sch_ep->sch_tt) { /* LS/FS with TT */ - /* tune for CS */ - if (sch_ep->ep_type != ISOC_OUT_EP) - boundary++; - else if (boundary > 1) /* normally esit >= 8 for FS/LS */ + /* + * tune for CS, normally esit >= 8 for FS/LS, + * not add one for other types to avoid access array + * out of boundary + */ + if (sch_ep->ep_type == ISOC_OUT_EP && boundary > 1) boundary--; } From 8c8d0f7ac82f4cca7f0dcffd29053953197c2865 Mon Sep 17 00:00:00 2001 From: Stefan Metzmacher Date: Wed, 14 Sep 2022 05:25:47 +0200 Subject: [PATCH 091/116] cifs: always initialize struct msghdr smb_msg completely [ Upstream commit bedc8f76b3539ac4f952114b316bcc2251e808ce ] So far we were just lucky because the uninitialized members of struct msghdr are not used by default on a SOCK_STREAM tcp socket. But as new things like msg_ubuf and sg_from_iter where added recently, we should play on the safe side and avoid potention problems in future. Signed-off-by: Stefan Metzmacher Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French Signed-off-by: Sasha Levin --- fs/cifs/connect.c | 7 ++----- fs/cifs/transport.c | 6 +----- 2 files changed, 3 insertions(+), 10 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 86bdebd2ece6..f8127edb8973 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -791,9 +791,6 @@ cifs_readv_from_socket(struct TCP_Server_Info *server, struct msghdr *smb_msg) int length = 0; int total_read; - smb_msg->msg_control = NULL; - smb_msg->msg_controllen = 0; - for (total_read = 0; msg_data_left(smb_msg); total_read += length) { try_to_freeze(); @@ -844,7 +841,7 @@ int cifs_read_from_socket(struct TCP_Server_Info *server, char *buf, unsigned int to_read) { - struct msghdr smb_msg; + struct msghdr smb_msg = {}; struct kvec iov = {.iov_base = buf, .iov_len = to_read}; iov_iter_kvec(&smb_msg.msg_iter, READ, &iov, 1, to_read); @@ -855,7 +852,7 @@ int cifs_read_page_from_socket(struct TCP_Server_Info *server, struct page *page, unsigned int page_offset, unsigned int to_read) { - struct msghdr smb_msg; + struct msghdr smb_msg = {}; struct bio_vec bv = { .bv_page = page, .bv_len = to_read, .bv_offset = page_offset}; iov_iter_bvec(&smb_msg.msg_iter, READ, &bv, 1, to_read); diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 079a4f6162ed..b98ae69edb8f 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -209,10 +209,6 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, *sent = 0; - smb_msg->msg_name = NULL; - smb_msg->msg_namelen = 0; - smb_msg->msg_control = NULL; - smb_msg->msg_controllen = 0; if (server->noblocksnd) smb_msg->msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; else @@ -324,7 +320,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst, sigset_t mask, oldmask; size_t total_len = 0, sent, size; struct socket *ssocket = server->ssocket; - struct msghdr smb_msg; + struct msghdr smb_msg = {}; int val = 1; __be32 rfc1002_marker; From 0b467eab0aad636ec78067687d632adcb3f04230 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 27 Aug 2022 15:03:45 +0200 Subject: [PATCH 092/116] Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region [ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ] Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g. $ cat /proc/iomem ... f8000000-fffbffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:08.0 f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe ... fe0000000-fffffffff : PCI Bus 0000:00 fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe fe0000000-fe07fffff : 2ba2:00:02.0 fe0000000-fe07fffff : mlx4_core the interesting part is the 'f8000000' region as it is actually the VM's framebuffer: $ lspci -v ... 0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] ... hv_vmbus: registering driver hyperv_drm hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff] hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active? Note: "Cannot request framebuffer" is not a fatal error in hyperv_setup_gen1() as the code assumes there's some other framebuffer device there but we actually have some other PCI device (mlx4 in this case) config space there! The problem appears to be that vmbus_allocate_mmio() can use dedicated framebuffer region to serve any MMIO request from any device. The semantics one might assume of a parameter named "fb_overlap_ok" aren't implemented because !fb_overlap_ok essentially has no effect. The existing semantics are really "prefer_fb_overlap". This patch implements the expected and needed semantics, which is to not allocate from the frame buffer space when !fb_overlap_ok. Note, Gen2 VMs are usually unaffected by the issue because framebuffer region is already taken by EFI fb (in case kernel supports it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers load after it. Devices can be brought up in any sequence so let's resolve the issue by always ignoring 'fb_mmio' region for non-FB requests, even if the region is unclaimed. Reviewed-by: Michael Kelley Signed-off-by: Vitaly Kuznetsov Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com Signed-off-by: Wei Liu Signed-off-by: Sasha Levin --- drivers/hv/vmbus_drv.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 56918274c48c..d4c5efc6e157 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -2075,7 +2075,7 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, bool fb_overlap_ok) { struct resource *iter, *shadow; - resource_size_t range_min, range_max, start; + resource_size_t range_min, range_max, start, end; const char *dev_n = dev_name(&device_obj->device); int retval; @@ -2110,6 +2110,14 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, range_max = iter->end; start = (range_min + align - 1) & ~(align - 1); for (; start + size - 1 <= range_max; start += align) { + end = start + size - 1; + + /* Skip the whole fb_mmio region if not fb_overlap_ok */ + if (!fb_overlap_ok && fb_mmio && + (((start >= fb_mmio->start) && (start <= fb_mmio->end)) || + ((end >= fb_mmio->start) && (end <= fb_mmio->end)))) + continue; + shadow = __request_region(iter, start, size, NULL, IORESOURCE_BUSY); if (!shadow) From c89849ecfd2e10838b31c519c2a6607266b58f02 Mon Sep 17 00:00:00 2001 From: Hamza Mahfooz Date: Tue, 6 Sep 2022 15:01:49 -0400 Subject: [PATCH 093/116] drm/amdgpu: use dirty framebuffer helper [ Upstream commit 66f99628eb24409cb8feb5061f78283c8b65f820 ] Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by: Hamza Mahfooz Acked-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index b588e0e409e7..d8687868407d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -495,6 +496,7 @@ bool amdgpu_display_ddc_probe(struct amdgpu_connector *amdgpu_connector, static const struct drm_framebuffer_funcs amdgpu_fb_funcs = { .destroy = drm_gem_fb_destroy, .create_handle = drm_gem_fb_create_handle, + .dirty = drm_atomic_helper_dirtyfb, }; uint32_t amdgpu_display_supported_domains(struct amdgpu_device *adev, From 75ed7dee26aba0ab241874569bbe7694a524d944 Mon Sep 17 00:00:00 2001 From: Yao Wang1 Date: Mon, 22 Aug 2022 18:30:31 +0800 Subject: [PATCH 094/116] drm/amd/display: Limit user regamma to a valid value [ Upstream commit 3601d620f22e37740cf73f8278eabf9f2aa19eb7 ] [Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by: Daniel Wheeler Reviewed-by: Krunoslav Kovac Reviewed-by: Aric Cyr Acked-by: Pavle Kotarac Signed-off-by: Yao Wang1 Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/display/modules/color/color_gamma.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c index e042d8ce05b4..22d105635e33 100644 --- a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c +++ b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c @@ -1486,6 +1486,7 @@ static void interpolate_user_regamma(uint32_t hw_points_num, struct fixed31_32 lut2; struct fixed31_32 delta_lut; struct fixed31_32 delta_index; + const struct fixed31_32 one = dc_fixpt_from_int(1); i = 0; /* fixed_pt library has problems handling too small values */ @@ -1514,6 +1515,9 @@ static void interpolate_user_regamma(uint32_t hw_points_num, } else hw_x = coordinates_x[i].x; + if (dc_fixpt_le(one, hw_x)) + hw_x = one; + norm_x = dc_fixpt_mul(norm_factor, hw_x); index = dc_fixpt_floor(norm_x); if (index < 0 || index > 255) From a874609522b51bb201716a39734446075850afd9 Mon Sep 17 00:00:00 2001 From: Nathan Huckleberry Date: Tue, 13 Sep 2022 13:55:55 -0700 Subject: [PATCH 095/116] drm/rockchip: Fix return type of cdn_dp_connector_mode_valid [ Upstream commit b0b9408f132623dc88e78adb5282f74e4b64bb57 ] The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of cdn_dp_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry Reviewed-by: Nathan Chancellor Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20220913205555.155149-1-nhuck@google.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/rockchip/cdn-dp-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c index 8f299d76b69b..67dae1354aa6 100644 --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c @@ -275,8 +275,9 @@ static int cdn_dp_connector_get_modes(struct drm_connector *connector) return ret; } -static int cdn_dp_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) +static enum drm_mode_status +cdn_dp_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) { struct cdn_dp_device *dp = connector_to_dp(connector); struct drm_display_info *display_info = &dp->connector.display_info; From 04aa8187eba53c344639f455570a2ad35183b497 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Fri, 29 Jul 2022 13:30:23 +0900 Subject: [PATCH 096/116] workqueue: don't skip lockdep work dependency in cancel_work_sync() [ Upstream commit c0feea594e058223973db94c1c32a830c9807c86 ] Like Hillf Danton mentioned syzbot should have been able to catch cancel_work_sync() in work context by checking lockdep_map in __flush_work() for both flush and cancel. in [1], being unable to report an obvious deadlock scenario shown below is broken. From locking dependency perspective, sync version of cancel request should behave as if flush request, for it waits for completion of work if that work has already started execution. ---------- #include #include static DEFINE_MUTEX(mutex); static void work_fn(struct work_struct *work) { schedule_timeout_uninterruptible(HZ / 5); mutex_lock(&mutex); mutex_unlock(&mutex); } static DECLARE_WORK(work, work_fn); static int __init test_init(void) { schedule_work(&work); schedule_timeout_uninterruptible(HZ / 10); mutex_lock(&mutex); cancel_work_sync(&work); mutex_unlock(&mutex); return -EINVAL; } module_init(test_init); MODULE_LICENSE("GPL"); ---------- The check this patch restores was added by commit 0976dfc1d0cd80a4 ("workqueue: Catch more locking problems with flush_work()"). Then, lockdep's crossrelease feature was added by commit b09be676e0ff25bd ("locking/lockdep: Implement the 'crossrelease' feature"). As a result, this check was once removed by commit fd1a5b04dfb899f8 ("workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes"). But lockdep's crossrelease feature was removed by commit e966eaeeb623f099 ("locking/lockdep: Remove the cross-release locking checks"). At this point, this check should have been restored. Then, commit d6e89786bed977f3 ("workqueue: skip lockdep wq dependency in cancel_work_sync()") introduced a boolean flag in order to distinguish flush_work() and cancel_work_sync(), for checking "struct workqueue_struct" dependency when called from cancel_work_sync() was causing false positives. Then, commit 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") tried to restore "struct work_struct" dependency check, but by error checked this boolean flag. Like an example shown above indicates, "struct work_struct" dependency needs to be checked for both flush_work() and cancel_work_sync(). Link: https://lkml.kernel.org/r/20220504044800.4966-1-hdanton@sina.com [1] Reported-by: Hillf Danton Suggested-by: Lai Jiangshan Fixes: 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") Cc: Johannes Berg Signed-off-by: Tetsuo Handa Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin --- kernel/workqueue.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index e90f37e22202..dd96391b44de 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -3049,10 +3049,8 @@ static bool __flush_work(struct work_struct *work, bool from_cancel) if (WARN_ON(!work->func)) return false; - if (!from_cancel) { - lock_map_acquire(&work->lockdep_map); - lock_map_release(&work->lockdep_map); - } + lock_map_acquire(&work->lockdep_map); + lock_map_release(&work->lockdep_map); if (start_flush_work(work, &barr, from_cancel)) { wait_for_completion(&barr.done); From bb7eb3ca4b3b0d2c7872cf1a41c30f5e5bd65df0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lu=C3=ADs=20Henriques?= Date: Mon, 22 Aug 2022 10:42:35 +0100 Subject: [PATCH 097/116] ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 29a5b8a137ac8eb410cc823653a29ac0e7b7e1b0 upstream. When walking through an inode extents, the ext4_ext_binsearch_idx() function assumes that the extent header has been previously validated. However, there are no checks that verify that the number of entries (eh->eh_entries) is non-zero when depth is > 0. And this will lead to problems because the EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this: [ 135.245946] ------------[ cut here ]------------ [ 135.247579] kernel BUG at fs/ext4/extents.c:2258! [ 135.249045] invalid opcode: 0000 [#1] PREEMPT SMP [ 135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4 [ 135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0 [ 135.256475] Code: [ 135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246 [ 135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023 [ 135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c [ 135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c [ 135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024 [ 135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000 [ 135.272394] FS: 00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 [ 135.274510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0 [ 135.277952] Call Trace: [ 135.278635] [ 135.279247] ? preempt_count_add+0x6d/0xa0 [ 135.280358] ? percpu_counter_add_batch+0x55/0xb0 [ 135.281612] ? _raw_read_unlock+0x18/0x30 [ 135.282704] ext4_map_blocks+0x294/0x5a0 [ 135.283745] ? xa_load+0x6f/0xa0 [ 135.284562] ext4_mpage_readpages+0x3d6/0x770 [ 135.285646] read_pages+0x67/0x1d0 [ 135.286492] ? folio_add_lru+0x51/0x80 [ 135.287441] page_cache_ra_unbounded+0x124/0x170 [ 135.288510] filemap_get_pages+0x23d/0x5a0 [ 135.289457] ? path_openat+0xa72/0xdd0 [ 135.290332] filemap_read+0xbf/0x300 [ 135.291158] ? _raw_spin_lock_irqsave+0x17/0x40 [ 135.292192] new_sync_read+0x103/0x170 [ 135.293014] vfs_read+0x15d/0x180 [ 135.293745] ksys_read+0xa1/0xe0 [ 135.294461] do_syscall_64+0x3c/0x80 [ 135.295284] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch simply adds an extra check in __ext4_ext_check(), verifying that eh_entries is not 0 when eh_depth is > 0. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215941 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216283 Cc: Baokun Li Cc: stable@kernel.org Signed-off-by: Luís Henriques Reviewed-by: Jan Kara Reviewed-by: Baokun Li Link: https://lore.kernel.org/r/20220822094235.2690-1-lhenriques@suse.de Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/extents.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index d5e649e578cb..ace8d6145253 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -500,6 +500,10 @@ static int __ext4_ext_check(const char *function, unsigned int line, error_msg = "invalid eh_entries"; goto corrupted; } + if (unlikely((eh->eh_entries == 0) && (depth > 0))) { + error_msg = "eh_entries is 0 but eh_depth is > 0"; + goto corrupted; + } if (!ext4_valid_extent_entries(inode, eh, lblk, &pblk, depth)) { error_msg = "invalid extent entries"; goto corrupted; From c494dbca992831d8fccf2bfc6756cc145b2d11ed Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:40 +0530 Subject: [PATCH 098/116] xfs: replace -EIO with -EFSCORRUPTED for corrupt metadata commit c2414ad6e66ab96b867309454498f7fb29b7e855 upstream. There are a few places where we return -EIO instead of -EFSCORRUPTED when we find corrupt metadata. Fix those places. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Reviewed-by: Brian Foster Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/libxfs/xfs_bmap.c | 6 +++--- fs/xfs/xfs_attr_inactive.c | 6 +++--- fs/xfs/xfs_dquot.c | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index c114d24be619..de4e71725b2c 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -1374,7 +1374,7 @@ xfs_bmap_last_before( case XFS_DINODE_FMT_EXTENTS: break; default: - return -EIO; + return -EFSCORRUPTED; } if (!(ifp->if_flags & XFS_IFEXTENTS)) { @@ -1475,7 +1475,7 @@ xfs_bmap_last_offset( if (XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - return -EIO; + return -EFSCORRUPTED; error = xfs_bmap_last_extent(NULL, ip, whichfork, &rec, &is_empty); if (error || is_empty) @@ -5872,7 +5872,7 @@ xfs_bmap_insert_extents( del_cursor); if (stop_fsb >= got.br_startoff + got.br_blockcount) { - error = -EIO; + error = -EFSCORRUPTED; goto del_cursor; } diff --git a/fs/xfs/xfs_attr_inactive.c b/fs/xfs/xfs_attr_inactive.c index a640a285cc52..f83f11d929e4 100644 --- a/fs/xfs/xfs_attr_inactive.c +++ b/fs/xfs/xfs_attr_inactive.c @@ -209,7 +209,7 @@ xfs_attr3_node_inactive( */ if (level > XFS_DA_NODE_MAXDEPTH) { xfs_trans_brelse(*trans, bp); /* no locks for later trans */ - return -EIO; + return -EFSCORRUPTED; } node = bp->b_addr; @@ -258,7 +258,7 @@ xfs_attr3_node_inactive( error = xfs_attr3_leaf_inactive(trans, dp, child_bp); break; default: - error = -EIO; + error = -EFSCORRUPTED; xfs_trans_brelse(*trans, child_bp); break; } @@ -341,7 +341,7 @@ xfs_attr3_root_inactive( error = xfs_attr3_leaf_inactive(trans, dp, bp); break; default: - error = -EIO; + error = -EFSCORRUPTED; xfs_trans_brelse(*trans, bp); break; } diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index 3cbf248af51f..aa5084180270 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -1125,7 +1125,7 @@ xfs_qm_dqflush( xfs_buf_relse(bp); xfs_dqfunlock(dqp); xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); - return -EIO; + return -EFSCORRUPTED; } /* This is the only portion of data that needs to persist */ From 979eb1230413fb50f71995534d2f517ed67e07c9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 24 Sep 2022 18:26:41 +0530 Subject: [PATCH 099/116] xfs: slightly tweak an assert in xfs_fs_map_blocks commit 88cdb7147b21b2d8b4bd3f3d95ce0bffd73e1ac3 upstream. We should never see delalloc blocks for a pNFS layout, write or not. Adjust the assert to check for that. Signed-off-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_pnfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_pnfs.c b/fs/xfs/xfs_pnfs.c index f63fe8d924a3..058af699e046 100644 --- a/fs/xfs/xfs_pnfs.c +++ b/fs/xfs/xfs_pnfs.c @@ -147,11 +147,11 @@ xfs_fs_map_blocks( if (error) goto out_unlock; + ASSERT(!nimaps || imap.br_startblock != DELAYSTARTBLOCK); + if (write) { enum xfs_prealloc_flags flags = 0; - ASSERT(imap.br_startblock != DELAYSTARTBLOCK); - if (!nimaps || imap.br_startblock == HOLESTARTBLOCK) { /* * xfs_iomap_write_direct() expects to take ownership of From a102869fb173b8b1fcbe782c7effa6d738f41b86 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:42 +0530 Subject: [PATCH 100/116] xfs: add missing assert in xfs_fsmap_owner_from_rmap commit 110f09cb705af8c53f2a457baf771d2935ed62d4 upstream. The fsmap handler shouldn't fail silently if the rmap code ever feeds it a special owner number that isn't known to the fsmap handler. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_fsmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_fsmap.c b/fs/xfs/xfs_fsmap.c index 01c0933a4d10..79e8af8f4669 100644 --- a/fs/xfs/xfs_fsmap.c +++ b/fs/xfs/xfs_fsmap.c @@ -146,6 +146,7 @@ xfs_fsmap_owner_from_rmap( dest->fmr_owner = XFS_FMR_OWN_FREE; break; default: + ASSERT(0); return -EFSCORRUPTED; } return 0; From a33bcad48b48fa413039be1bf3266c3c8a38dc69 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:43 +0530 Subject: [PATCH 101/116] xfs: range check ri_cnt when recovering log items commit d6abecb82573fed5f7e4b595b5c0bd37707d2848 upstream. Range check the region counter when we're reassembling regions from log items during log recovery. In the old days ASSERT would halt the kernel, but this isn't true any more so we have to make an explicit error return. Coverity-id: 1132508 Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_log_recover.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index c1a514ffff55..094ae1a91c44 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -4293,7 +4293,16 @@ xlog_recover_add_to_trans( kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t), 0); } - ASSERT(item->ri_total > item->ri_cnt); + + if (item->ri_total <= item->ri_cnt) { + xfs_warn(log->l_mp, + "log item region count (%d) overflowed size (%d)", + item->ri_cnt, item->ri_total); + ASSERT(0); + kmem_free(ptr); + return -EFSCORRUPTED; + } + /* Description region is ri_buf[0] */ item->ri_buf[item->ri_cnt].i_addr = ptr; item->ri_buf[item->ri_cnt].i_len = len; From 796ff09598cdb1389c4aff629b5b68e9a8455fa1 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:44 +0530 Subject: [PATCH 102/116] xfs: attach dquots and reserve quota blocks during unwritten conversion commit 2815a16d7ff6230a8e37928829d221bb075aa160 upstream. In xfs_iomap_write_unwritten, we need to ensure that dquots are attached to the inode and quota blocks reserved so that we capture in the quota counters any blocks allocated to handle a bmbt split. This can happen on the first unwritten extent conversion to a preallocated sparse file on a fresh mount. This was found by running generic/311 with quotas enabled. The bug seems to have been introduced in "[XFS] rework iocore infrastructure, remove some code and make it more" from ~2002? Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_iomap.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 26cf811f3d96..b6f85e488d5c 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -765,6 +765,11 @@ xfs_iomap_write_unwritten( */ resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1; + /* Attach dquots so that bmbt splits are accounted correctly. */ + error = xfs_qm_dqattach(ip); + if (error) + return error; + do { /* * Set up a transaction to convert the range of extents @@ -783,6 +788,11 @@ xfs_iomap_write_unwritten( xfs_ilock(ip, XFS_ILOCK_EXCL); xfs_trans_ijoin(tp, ip, 0); + error = xfs_trans_reserve_quota_nblks(tp, ip, resblks, 0, + XFS_QMOPT_RES_REGBLKS); + if (error) + goto error_on_bmapi_transaction; + /* * Modify the unwritten extent state of the buffer. */ From 9185003c93b388bbbfd488448d284e7afce185ca Mon Sep 17 00:00:00 2001 From: kaixuxia Date: Sat, 24 Sep 2022 18:26:45 +0530 Subject: [PATCH 103/116] xfs: Fix deadlock between AGI and AGF when target_ip exists in xfs_rename() commit 93597ae8dac0149b5c00b787cba6bf7ba213e666 upstream. When target_ip exists in xfs_rename(), the xfs_dir_replace() call may need to hold the AGF lock to allocate more blocks, and then invoking the xfs_droplink() call to hold AGI lock to drop target_ip onto the unlinked list, so we get the lock order AGF->AGI. This would break the ordering constraint on AGI and AGF locking - inode allocation locks the AGI, then can allocate a new extent for new inodes, locking the AGF after the AGI. In this patch we check whether the replace operation need more blocks firstly. If so, acquire the agi lock firstly to preserve locking order(AGI/AGF). Actually, the locking order problem only occurs when we are locking the AGI/AGF of the same AG. For multiple AGs the AGI lock will be released after the transaction committed. Signed-off-by: kaixuxia Reviewed-by: Darrick J. Wong [darrick: reword the comment] Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/libxfs/xfs_dir2.h | 2 ++ fs/xfs/libxfs/xfs_dir2_sf.c | 28 +++++++++++++++++++++++----- fs/xfs/xfs_inode.c | 17 +++++++++++++++++ 3 files changed, 42 insertions(+), 5 deletions(-) diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h index f54244779492..01b1722333a9 100644 --- a/fs/xfs/libxfs/xfs_dir2.h +++ b/fs/xfs/libxfs/xfs_dir2.h @@ -124,6 +124,8 @@ extern int xfs_dir_lookup(struct xfs_trans *tp, struct xfs_inode *dp, extern int xfs_dir_removename(struct xfs_trans *tp, struct xfs_inode *dp, struct xfs_name *name, xfs_ino_t ino, xfs_extlen_t tot); +extern bool xfs_dir2_sf_replace_needblock(struct xfs_inode *dp, + xfs_ino_t inum); extern int xfs_dir_replace(struct xfs_trans *tp, struct xfs_inode *dp, struct xfs_name *name, xfs_ino_t inum, xfs_extlen_t tot); diff --git a/fs/xfs/libxfs/xfs_dir2_sf.c b/fs/xfs/libxfs/xfs_dir2_sf.c index ae16ca7c422a..90eff6c2de7e 100644 --- a/fs/xfs/libxfs/xfs_dir2_sf.c +++ b/fs/xfs/libxfs/xfs_dir2_sf.c @@ -944,6 +944,27 @@ xfs_dir2_sf_removename( return 0; } +/* + * Check whether the sf dir replace operation need more blocks. + */ +bool +xfs_dir2_sf_replace_needblock( + struct xfs_inode *dp, + xfs_ino_t inum) +{ + int newsize; + struct xfs_dir2_sf_hdr *sfp; + + if (dp->i_d.di_format != XFS_DINODE_FMT_LOCAL) + return false; + + sfp = (struct xfs_dir2_sf_hdr *)dp->i_df.if_u1.if_data; + newsize = dp->i_df.if_bytes + (sfp->count + 1) * XFS_INO64_DIFF; + + return inum > XFS_DIR2_MAX_SHORT_INUM && + sfp->i8count == 0 && newsize > XFS_IFORK_DSIZE(dp); +} + /* * Replace the inode number of an entry in a shortform directory. */ @@ -980,17 +1001,14 @@ xfs_dir2_sf_replace( */ if (args->inumber > XFS_DIR2_MAX_SHORT_INUM && sfp->i8count == 0) { int error; /* error return value */ - int newsize; /* new inode size */ - newsize = dp->i_df.if_bytes + (sfp->count + 1) * XFS_INO64_DIFF; /* * Won't fit as shortform, convert to block then do replace. */ - if (newsize > XFS_IFORK_DSIZE(dp)) { + if (xfs_dir2_sf_replace_needblock(dp, args->inumber)) { error = xfs_dir2_sf_to_block(args); - if (error) { + if (error) return error; - } return xfs_dir2_block_replace(args); } /* diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 7a9048c4c2f9..8990be13a16c 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -3215,6 +3215,7 @@ xfs_rename( struct xfs_trans *tp; struct xfs_inode *wip = NULL; /* whiteout inode */ struct xfs_inode *inodes[__XFS_SORT_INODES]; + struct xfs_buf *agibp; int num_inodes = __XFS_SORT_INODES; bool new_parent = (src_dp != target_dp); bool src_is_directory = S_ISDIR(VFS_I(src_ip)->i_mode); @@ -3379,6 +3380,22 @@ xfs_rename( * In case there is already an entry with the same * name at the destination directory, remove it first. */ + + /* + * Check whether the replace operation will need to allocate + * blocks. This happens when the shortform directory lacks + * space and we have to convert it to a block format directory. + * When more blocks are necessary, we must lock the AGI first + * to preserve locking order (AGI -> AGF). + */ + if (xfs_dir2_sf_replace_needblock(target_dp, src_ip->i_ino)) { + error = xfs_read_agi(mp, tp, + XFS_INO_TO_AGNO(mp, target_ip->i_ino), + &agibp); + if (error) + goto out_trans_cancel; + } + error = xfs_dir_replace(tp, target_dp, target_name, src_ip->i_ino, spaceres); if (error) From 8856a6572fed4344b5e4fea2484f6e05390790d2 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:46 +0530 Subject: [PATCH 104/116] xfs: convert EIO to EFSCORRUPTED when log contents are invalid commit 895e196fb6f84402dcd0c1d3c3feb8a58049564e upstream. Convert EIO to EFSCORRUPTED in the logging code when we can determine that the log contents are invalid. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_bmap_item.c | 4 ++-- fs/xfs/xfs_extfree_item.c | 2 +- fs/xfs/xfs_log_recover.c | 32 ++++++++++++++++---------------- fs/xfs/xfs_refcount_item.c | 2 +- fs/xfs/xfs_rmap_item.c | 2 +- 5 files changed, 21 insertions(+), 21 deletions(-) diff --git a/fs/xfs/xfs_bmap_item.c b/fs/xfs/xfs_bmap_item.c index 83d24e983d4c..d84339c91466 100644 --- a/fs/xfs/xfs_bmap_item.c +++ b/fs/xfs/xfs_bmap_item.c @@ -456,7 +456,7 @@ xfs_bui_recover( if (buip->bui_format.bui_nextents != XFS_BUI_MAX_FAST_EXTENTS) { set_bit(XFS_BUI_RECOVERED, &buip->bui_flags); xfs_bui_release(buip); - return -EIO; + return -EFSCORRUPTED; } /* @@ -490,7 +490,7 @@ xfs_bui_recover( */ set_bit(XFS_BUI_RECOVERED, &buip->bui_flags); xfs_bui_release(buip); - return -EIO; + return -EFSCORRUPTED; } error = xfs_trans_alloc(mp, &M_RES(mp)->tr_itruncate, diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index e44efc41a041..1b3ade30ef65 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -624,7 +624,7 @@ xfs_efi_recover( */ set_bit(XFS_EFI_RECOVERED, &efip->efi_flags); xfs_efi_release(efip); - return -EIO; + return -EFSCORRUPTED; } } diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 094ae1a91c44..796bbc9dd8b0 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -471,7 +471,7 @@ xlog_find_verify_log_record( xfs_warn(log->l_mp, "Log inconsistent (didn't find previous header)"); ASSERT(0); - error = -EIO; + error = -EFSCORRUPTED; goto out; } @@ -1350,7 +1350,7 @@ xlog_find_tail( return error; if (!error) { xfs_warn(log->l_mp, "%s: couldn't find sync record", __func__); - return -EIO; + return -EFSCORRUPTED; } *tail_blk = BLOCK_LSN(be64_to_cpu(rhead->h_tail_lsn)); @@ -3166,7 +3166,7 @@ xlog_recover_inode_pass2( default: xfs_warn(log->l_mp, "%s: Invalid flag", __func__); ASSERT(0); - error = -EIO; + error = -EFSCORRUPTED; goto out_release; } } @@ -3247,12 +3247,12 @@ xlog_recover_dquot_pass2( recddq = item->ri_buf[1].i_addr; if (recddq == NULL) { xfs_alert(log->l_mp, "NULL dquot in %s.", __func__); - return -EIO; + return -EFSCORRUPTED; } if (item->ri_buf[1].i_len < sizeof(xfs_disk_dquot_t)) { xfs_alert(log->l_mp, "dquot too small (%d) in %s.", item->ri_buf[1].i_len, __func__); - return -EIO; + return -EFSCORRUPTED; } /* @@ -3279,7 +3279,7 @@ xlog_recover_dquot_pass2( if (fa) { xfs_alert(mp, "corrupt dquot ID 0x%x in log at %pS", dq_f->qlf_id, fa); - return -EIO; + return -EFSCORRUPTED; } ASSERT(dq_f->qlf_len == 1); @@ -4018,7 +4018,7 @@ xlog_recover_commit_pass1( xfs_warn(log->l_mp, "%s: invalid item type (%d)", __func__, ITEM_TYPE(item)); ASSERT(0); - return -EIO; + return -EFSCORRUPTED; } } @@ -4066,7 +4066,7 @@ xlog_recover_commit_pass2( xfs_warn(log->l_mp, "%s: invalid item type (%d)", __func__, ITEM_TYPE(item)); ASSERT(0); - return -EIO; + return -EFSCORRUPTED; } } @@ -4187,7 +4187,7 @@ xlog_recover_add_to_cont_trans( ASSERT(len <= sizeof(struct xfs_trans_header)); if (len > sizeof(struct xfs_trans_header)) { xfs_warn(log->l_mp, "%s: bad header length", __func__); - return -EIO; + return -EFSCORRUPTED; } xlog_recover_add_item(&trans->r_itemq); @@ -4243,13 +4243,13 @@ xlog_recover_add_to_trans( xfs_warn(log->l_mp, "%s: bad header magic number", __func__); ASSERT(0); - return -EIO; + return -EFSCORRUPTED; } if (len > sizeof(struct xfs_trans_header)) { xfs_warn(log->l_mp, "%s: bad header length", __func__); ASSERT(0); - return -EIO; + return -EFSCORRUPTED; } /* @@ -4285,7 +4285,7 @@ xlog_recover_add_to_trans( in_f->ilf_size); ASSERT(0); kmem_free(ptr); - return -EIO; + return -EFSCORRUPTED; } item->ri_total = in_f->ilf_size; @@ -4389,7 +4389,7 @@ xlog_recovery_process_trans( default: xfs_warn(log->l_mp, "%s: bad flag 0x%x", __func__, flags); ASSERT(0); - error = -EIO; + error = -EFSCORRUPTED; break; } if (error || freeit) @@ -4469,7 +4469,7 @@ xlog_recover_process_ophdr( xfs_warn(log->l_mp, "%s: bad clientid 0x%x", __func__, ohead->oh_clientid); ASSERT(0); - return -EIO; + return -EFSCORRUPTED; } /* @@ -4479,7 +4479,7 @@ xlog_recover_process_ophdr( if (dp + len > end) { xfs_warn(log->l_mp, "%s: bad length 0x%x", __func__, len); WARN_ON(1); - return -EIO; + return -EFSCORRUPTED; } trans = xlog_recover_ophdr_to_trans(rhash, rhead, ohead); @@ -5209,7 +5209,7 @@ xlog_valid_rec_header( (be32_to_cpu(rhead->h_version) & (~XLOG_VERSION_OKBITS))))) { xfs_warn(log->l_mp, "%s: unrecognised log version (%d).", __func__, be32_to_cpu(rhead->h_version)); - return -EIO; + return -EFSCORRUPTED; } /* LR body must have data or it wouldn't have been written */ diff --git a/fs/xfs/xfs_refcount_item.c b/fs/xfs/xfs_refcount_item.c index 2328268e6245..e22ac9cdb971 100644 --- a/fs/xfs/xfs_refcount_item.c +++ b/fs/xfs/xfs_refcount_item.c @@ -497,7 +497,7 @@ xfs_cui_recover( */ set_bit(XFS_CUI_RECOVERED, &cuip->cui_flags); xfs_cui_release(cuip); - return -EIO; + return -EFSCORRUPTED; } } diff --git a/fs/xfs/xfs_rmap_item.c b/fs/xfs/xfs_rmap_item.c index 8939e0ea09cd..af83e2b2a429 100644 --- a/fs/xfs/xfs_rmap_item.c +++ b/fs/xfs/xfs_rmap_item.c @@ -539,7 +539,7 @@ xfs_rui_recover( */ set_bit(XFS_RUI_RECOVERED, &ruip->rui_flags); xfs_rui_release(ruip); - return -EIO; + return -EFSCORRUPTED; } } From 0336599b645e83bd34b845ce4a427584fec2af12 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:47 +0530 Subject: [PATCH 105/116] xfs: constify the buffer pointer arguments to error functions commit d243b89a611e83dc97ce7102419360677a664076 upstream. Some of the xfs error message functions take a pointer to a buffer that will be dumped to the system log. The logging functions don't change the contents, so constify all the parameters. This enables the next patch to ensure that we log bad metadata when we encounter it. Signed-off-by: Darrick J. Wong Reviewed-by: Carlos Maiolino Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_error.c | 6 +++--- fs/xfs/xfs_error.h | 6 +++--- fs/xfs/xfs_message.c | 2 +- fs/xfs/xfs_message.h | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c index 849fd4476950..0b156cc88108 100644 --- a/fs/xfs/xfs_error.c +++ b/fs/xfs/xfs_error.c @@ -329,7 +329,7 @@ xfs_corruption_error( const char *tag, int level, struct xfs_mount *mp, - void *buf, + const void *buf, size_t bufsize, const char *filename, int linenum, @@ -350,7 +350,7 @@ xfs_buf_verifier_error( struct xfs_buf *bp, int error, const char *name, - void *buf, + const void *buf, size_t bufsz, xfs_failaddr_t failaddr) { @@ -402,7 +402,7 @@ xfs_inode_verifier_error( struct xfs_inode *ip, int error, const char *name, - void *buf, + const void *buf, size_t bufsz, xfs_failaddr_t failaddr) { diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h index 602aa7d62b66..e6a22cfb542f 100644 --- a/fs/xfs/xfs_error.h +++ b/fs/xfs/xfs_error.h @@ -12,16 +12,16 @@ extern void xfs_error_report(const char *tag, int level, struct xfs_mount *mp, const char *filename, int linenum, xfs_failaddr_t failaddr); extern void xfs_corruption_error(const char *tag, int level, - struct xfs_mount *mp, void *buf, size_t bufsize, + struct xfs_mount *mp, const void *buf, size_t bufsize, const char *filename, int linenum, xfs_failaddr_t failaddr); extern void xfs_buf_verifier_error(struct xfs_buf *bp, int error, - const char *name, void *buf, size_t bufsz, + const char *name, const void *buf, size_t bufsz, xfs_failaddr_t failaddr); extern void xfs_verifier_error(struct xfs_buf *bp, int error, xfs_failaddr_t failaddr); extern void xfs_inode_verifier_error(struct xfs_inode *ip, int error, - const char *name, void *buf, size_t bufsz, + const char *name, const void *buf, size_t bufsz, xfs_failaddr_t failaddr); #define XFS_ERROR_REPORT(e, lvl, mp) \ diff --git a/fs/xfs/xfs_message.c b/fs/xfs/xfs_message.c index 9804efe525a9..c57e8ad39712 100644 --- a/fs/xfs/xfs_message.c +++ b/fs/xfs/xfs_message.c @@ -105,7 +105,7 @@ assfail(char *expr, char *file, int line) } void -xfs_hex_dump(void *p, int length) +xfs_hex_dump(const void *p, int length) { print_hex_dump(KERN_ALERT, "", DUMP_PREFIX_OFFSET, 16, 1, p, length, 1); } diff --git a/fs/xfs/xfs_message.h b/fs/xfs/xfs_message.h index 34447dca97d1..7f040b04b739 100644 --- a/fs/xfs/xfs_message.h +++ b/fs/xfs/xfs_message.h @@ -60,6 +60,6 @@ do { \ extern void assfail(char *expr, char *f, int l); extern void asswarn(char *expr, char *f, int l); -extern void xfs_hex_dump(void *p, int length); +extern void xfs_hex_dump(const void *p, int length); #endif /* __XFS_MESSAGE_H */ From ad9759d488021afbfc77df4c0b7c8a6969c6bbbc Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:48 +0530 Subject: [PATCH 106/116] xfs: always log corruption errors commit a5155b870d687de1a5f07e774b49b1e8ef0f6f50 upstream. Make sure we log something to dmesg whenever we return -EFSCORRUPTED up the call stack. Signed-off-by: Darrick J. Wong Reviewed-by: Carlos Maiolino Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/libxfs/xfs_alloc.c | 9 +++++++-- fs/xfs/libxfs/xfs_attr_leaf.c | 12 +++++++++--- fs/xfs/libxfs/xfs_bmap.c | 8 +++++++- fs/xfs/libxfs/xfs_btree.c | 5 ++++- fs/xfs/libxfs/xfs_da_btree.c | 24 ++++++++++++++++++------ fs/xfs/libxfs/xfs_dir2.c | 4 +++- fs/xfs/libxfs/xfs_dir2_leaf.c | 4 +++- fs/xfs/libxfs/xfs_dir2_node.c | 12 +++++++++--- fs/xfs/libxfs/xfs_inode_fork.c | 6 ++++++ fs/xfs/libxfs/xfs_refcount.c | 4 +++- fs/xfs/libxfs/xfs_rtbitmap.c | 6 ++++-- fs/xfs/xfs_acl.c | 15 ++++++++++++--- fs/xfs/xfs_attr_inactive.c | 6 +++++- fs/xfs/xfs_attr_list.c | 5 ++++- fs/xfs/xfs_bmap_item.c | 3 ++- fs/xfs/xfs_error.c | 21 +++++++++++++++++++++ fs/xfs/xfs_error.h | 1 + fs/xfs/xfs_extfree_item.c | 3 ++- fs/xfs/xfs_inode.c | 15 ++++++++++++--- fs/xfs/xfs_inode_item.c | 5 ++++- fs/xfs/xfs_iops.c | 10 +++++++--- fs/xfs/xfs_log_recover.c | 23 ++++++++++++++++++----- fs/xfs/xfs_qm.c | 13 +++++++++++-- fs/xfs/xfs_refcount_item.c | 3 ++- fs/xfs/xfs_rmap_item.c | 7 +++++-- 25 files changed, 179 insertions(+), 45 deletions(-) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index 436f686a9891..f1cdf5fbaa71 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -684,8 +684,10 @@ xfs_alloc_update_counters( xfs_trans_agblocks_delta(tp, len); if (unlikely(be32_to_cpu(agf->agf_freeblks) > - be32_to_cpu(agf->agf_length))) + be32_to_cpu(agf->agf_length))) { + xfs_buf_corruption_error(agbp); return -EFSCORRUPTED; + } xfs_alloc_log_agf(tp, agbp, XFS_AGF_FREEBLKS); return 0; @@ -751,6 +753,7 @@ xfs_alloc_ag_vextent_small( bp = xfs_btree_get_bufs(args->mp, args->tp, args->agno, fbno); if (!bp) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, args->mp); error = -EFSCORRUPTED; goto error; } @@ -2087,8 +2090,10 @@ xfs_free_agfl_block( return error; bp = xfs_btree_get_bufs(tp->t_mountp, tp, agno, agbno); - if (!bp) + if (!bp) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, tp->t_mountp); return -EFSCORRUPTED; + } xfs_trans_binval(tp, bp); return 0; diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c index de33efc9b4f9..0c23127347ac 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.c +++ b/fs/xfs/libxfs/xfs_attr_leaf.c @@ -2287,8 +2287,10 @@ xfs_attr3_leaf_lookup_int( leaf = bp->b_addr; xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr, leaf); entries = xfs_attr3_leaf_entryp(leaf); - if (ichdr.count >= args->geo->blksize / 8) + if (ichdr.count >= args->geo->blksize / 8) { + xfs_buf_corruption_error(bp); return -EFSCORRUPTED; + } /* * Binary search. (note: small blocks will skip this loop) @@ -2304,10 +2306,14 @@ xfs_attr3_leaf_lookup_int( else break; } - if (!(probe >= 0 && (!ichdr.count || probe < ichdr.count))) + if (!(probe >= 0 && (!ichdr.count || probe < ichdr.count))) { + xfs_buf_corruption_error(bp); return -EFSCORRUPTED; - if (!(span <= 4 || be32_to_cpu(entry->hashval) == hashval)) + } + if (!(span <= 4 || be32_to_cpu(entry->hashval) == hashval)) { + xfs_buf_corruption_error(bp); return -EFSCORRUPTED; + } /* * Since we may have duplicate hashval's, find the first matching diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index de4e71725b2c..e7fa611887ad 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -729,6 +729,7 @@ xfs_bmap_extents_to_btree( xfs_trans_mod_dquot_byino(tp, ip, XFS_TRANS_DQ_BCOUNT, 1L); abp = xfs_btree_get_bufl(mp, tp, args.fsbno); if (!abp) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, mp); error = -EFSCORRUPTED; goto out_unreserve_dquot; } @@ -1084,6 +1085,7 @@ xfs_bmap_add_attrfork( if (XFS_IFORK_Q(ip)) goto trans_cancel; if (ip->i_d.di_anextents != 0) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, mp); error = -EFSCORRUPTED; goto trans_cancel; } @@ -1374,6 +1376,7 @@ xfs_bmap_last_before( case XFS_DINODE_FMT_EXTENTS: break; default: + ASSERT(0); return -EFSCORRUPTED; } @@ -1474,8 +1477,10 @@ xfs_bmap_last_offset( return 0; if (XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE && - XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) + XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) { + ASSERT(0); return -EFSCORRUPTED; + } error = xfs_bmap_last_extent(NULL, ip, whichfork, &rec, &is_empty); if (error || is_empty) @@ -5872,6 +5877,7 @@ xfs_bmap_insert_extents( del_cursor); if (stop_fsb >= got.br_startoff + got.br_blockcount) { + ASSERT(0); error = -EFSCORRUPTED; goto del_cursor; } diff --git a/fs/xfs/libxfs/xfs_btree.c b/fs/xfs/libxfs/xfs_btree.c index 71de937f9e64..a13a25e922ec 100644 --- a/fs/xfs/libxfs/xfs_btree.c +++ b/fs/xfs/libxfs/xfs_btree.c @@ -1820,6 +1820,7 @@ xfs_btree_lookup_get_block( out_bad: *blkp = NULL; + xfs_buf_corruption_error(bp); xfs_trans_brelse(cur->bc_tp, bp); return -EFSCORRUPTED; } @@ -1867,8 +1868,10 @@ xfs_btree_lookup( XFS_BTREE_STATS_INC(cur, lookup); /* No such thing as a zero-level tree. */ - if (cur->bc_nlevels == 0) + if (cur->bc_nlevels == 0) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, cur->bc_mp); return -EFSCORRUPTED; + } block = NULL; keyno = 0; diff --git a/fs/xfs/libxfs/xfs_da_btree.c b/fs/xfs/libxfs/xfs_da_btree.c index 4fd1223c1bd5..1e2dc65adeb8 100644 --- a/fs/xfs/libxfs/xfs_da_btree.c +++ b/fs/xfs/libxfs/xfs_da_btree.c @@ -504,6 +504,7 @@ xfs_da3_split( node = oldblk->bp->b_addr; if (node->hdr.info.forw) { if (be32_to_cpu(node->hdr.info.forw) != addblk->blkno) { + xfs_buf_corruption_error(oldblk->bp); error = -EFSCORRUPTED; goto out; } @@ -516,6 +517,7 @@ xfs_da3_split( node = oldblk->bp->b_addr; if (node->hdr.info.back) { if (be32_to_cpu(node->hdr.info.back) != addblk->blkno) { + xfs_buf_corruption_error(oldblk->bp); error = -EFSCORRUPTED; goto out; } @@ -1541,8 +1543,10 @@ xfs_da3_node_lookup_int( break; } - if (magic != XFS_DA_NODE_MAGIC && magic != XFS_DA3_NODE_MAGIC) + if (magic != XFS_DA_NODE_MAGIC && magic != XFS_DA3_NODE_MAGIC) { + xfs_buf_corruption_error(blk->bp); return -EFSCORRUPTED; + } blk->magic = XFS_DA_NODE_MAGIC; @@ -1554,15 +1558,18 @@ xfs_da3_node_lookup_int( btree = dp->d_ops->node_tree_p(node); /* Tree taller than we can handle; bail out! */ - if (nodehdr.level >= XFS_DA_NODE_MAXDEPTH) + if (nodehdr.level >= XFS_DA_NODE_MAXDEPTH) { + xfs_buf_corruption_error(blk->bp); return -EFSCORRUPTED; + } /* Check the level from the root. */ if (blkno == args->geo->leafblk) expected_level = nodehdr.level - 1; - else if (expected_level != nodehdr.level) + else if (expected_level != nodehdr.level) { + xfs_buf_corruption_error(blk->bp); return -EFSCORRUPTED; - else + } else expected_level--; max = nodehdr.count; @@ -1612,12 +1619,17 @@ xfs_da3_node_lookup_int( } /* We can't point back to the root. */ - if (blkno == args->geo->leafblk) + if (blkno == args->geo->leafblk) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, + dp->i_mount); return -EFSCORRUPTED; + } } - if (expected_level != 0) + if (expected_level != 0) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, dp->i_mount); return -EFSCORRUPTED; + } /* * A leaf block that ends in the hashval that we are interested in diff --git a/fs/xfs/libxfs/xfs_dir2.c b/fs/xfs/libxfs/xfs_dir2.c index 867c5dee0751..452d04ae10ce 100644 --- a/fs/xfs/libxfs/xfs_dir2.c +++ b/fs/xfs/libxfs/xfs_dir2.c @@ -600,8 +600,10 @@ xfs_dir2_isblock( if ((rval = xfs_bmap_last_offset(args->dp, &last, XFS_DATA_FORK))) return rval; rval = XFS_FSB_TO_B(args->dp->i_mount, last) == args->geo->blksize; - if (rval != 0 && args->dp->i_d.di_size != args->geo->blksize) + if (rval != 0 && args->dp->i_d.di_size != args->geo->blksize) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, args->dp->i_mount); return -EFSCORRUPTED; + } *vp = rval; return 0; } diff --git a/fs/xfs/libxfs/xfs_dir2_leaf.c b/fs/xfs/libxfs/xfs_dir2_leaf.c index a53e4585a2f3..388b5da12228 100644 --- a/fs/xfs/libxfs/xfs_dir2_leaf.c +++ b/fs/xfs/libxfs/xfs_dir2_leaf.c @@ -1343,8 +1343,10 @@ xfs_dir2_leaf_removename( oldbest = be16_to_cpu(bf[0].length); ltp = xfs_dir2_leaf_tail_p(args->geo, leaf); bestsp = xfs_dir2_leaf_bests_p(ltp); - if (be16_to_cpu(bestsp[db]) != oldbest) + if (be16_to_cpu(bestsp[db]) != oldbest) { + xfs_buf_corruption_error(lbp); return -EFSCORRUPTED; + } /* * Mark the former data entry unused. */ diff --git a/fs/xfs/libxfs/xfs_dir2_node.c b/fs/xfs/libxfs/xfs_dir2_node.c index 99d5b2ed67f2..35e698fa85fd 100644 --- a/fs/xfs/libxfs/xfs_dir2_node.c +++ b/fs/xfs/libxfs/xfs_dir2_node.c @@ -374,8 +374,10 @@ xfs_dir2_leaf_to_node( leaf = lbp->b_addr; ltp = xfs_dir2_leaf_tail_p(args->geo, leaf); if (be32_to_cpu(ltp->bestcount) > - (uint)dp->i_d.di_size / args->geo->blksize) + (uint)dp->i_d.di_size / args->geo->blksize) { + xfs_buf_corruption_error(lbp); return -EFSCORRUPTED; + } /* * Copy freespace entries from the leaf block to the new block. @@ -446,8 +448,10 @@ xfs_dir2_leafn_add( * Quick check just to make sure we are not going to index * into other peoples memory */ - if (index < 0) + if (index < 0) { + xfs_buf_corruption_error(bp); return -EFSCORRUPTED; + } /* * If there are already the maximum number of leaf entries in @@ -740,8 +744,10 @@ xfs_dir2_leafn_lookup_for_entry( ents = dp->d_ops->leaf_ents_p(leaf); xfs_dir3_leaf_check(dp, bp); - if (leafhdr.count <= 0) + if (leafhdr.count <= 0) { + xfs_buf_corruption_error(bp); return -EFSCORRUPTED; + } /* * Look up the hash value in the leaf entries. diff --git a/fs/xfs/libxfs/xfs_inode_fork.c b/fs/xfs/libxfs/xfs_inode_fork.c index 8fdd0424070e..15d6f947620f 100644 --- a/fs/xfs/libxfs/xfs_inode_fork.c +++ b/fs/xfs/libxfs/xfs_inode_fork.c @@ -75,11 +75,15 @@ xfs_iformat_fork( error = xfs_iformat_btree(ip, dip, XFS_DATA_FORK); break; default: + xfs_inode_verifier_error(ip, -EFSCORRUPTED, __func__, + dip, sizeof(*dip), __this_address); return -EFSCORRUPTED; } break; default: + xfs_inode_verifier_error(ip, -EFSCORRUPTED, __func__, dip, + sizeof(*dip), __this_address); return -EFSCORRUPTED; } if (error) @@ -110,6 +114,8 @@ xfs_iformat_fork( error = xfs_iformat_btree(ip, dip, XFS_ATTR_FORK); break; default: + xfs_inode_verifier_error(ip, error, __func__, dip, + sizeof(*dip), __this_address); error = -EFSCORRUPTED; break; } diff --git a/fs/xfs/libxfs/xfs_refcount.c b/fs/xfs/libxfs/xfs_refcount.c index 9a7fadb1361c..78236bd6c64f 100644 --- a/fs/xfs/libxfs/xfs_refcount.c +++ b/fs/xfs/libxfs/xfs_refcount.c @@ -1591,8 +1591,10 @@ xfs_refcount_recover_extent( struct list_head *debris = priv; struct xfs_refcount_recovery *rr; - if (be32_to_cpu(rec->refc.rc_refcount) != 1) + if (be32_to_cpu(rec->refc.rc_refcount) != 1) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, cur->bc_mp); return -EFSCORRUPTED; + } rr = kmem_alloc(sizeof(struct xfs_refcount_recovery), 0); xfs_refcount_btrec_to_irec(rec, &rr->rr_rrec); diff --git a/fs/xfs/libxfs/xfs_rtbitmap.c b/fs/xfs/libxfs/xfs_rtbitmap.c index 42085e70c01a..85f123b3dfcc 100644 --- a/fs/xfs/libxfs/xfs_rtbitmap.c +++ b/fs/xfs/libxfs/xfs_rtbitmap.c @@ -15,7 +15,7 @@ #include "xfs_bmap.h" #include "xfs_trans.h" #include "xfs_rtalloc.h" - +#include "xfs_error.h" /* * Realtime allocator bitmap functions shared with userspace. @@ -70,8 +70,10 @@ xfs_rtbuf_get( if (error) return error; - if (nmap == 0 || !xfs_bmap_is_real_extent(&map)) + if (nmap == 0 || !xfs_bmap_is_real_extent(&map)) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, mp); return -EFSCORRUPTED; + } ASSERT(map.br_startblock != NULLFSBLOCK); error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index 96d7071cfa46..3f2292c7835c 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -12,6 +12,7 @@ #include "xfs_inode.h" #include "xfs_attr.h" #include "xfs_trace.h" +#include "xfs_error.h" #include @@ -23,6 +24,7 @@ STATIC struct posix_acl * xfs_acl_from_disk( + struct xfs_mount *mp, const struct xfs_acl *aclp, int len, int max_entries) @@ -32,11 +34,18 @@ xfs_acl_from_disk( const struct xfs_acl_entry *ace; unsigned int count, i; - if (len < sizeof(*aclp)) + if (len < sizeof(*aclp)) { + XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, aclp, + len); return ERR_PTR(-EFSCORRUPTED); + } + count = be32_to_cpu(aclp->acl_cnt); - if (count > max_entries || XFS_ACL_SIZE(count) != len) + if (count > max_entries || XFS_ACL_SIZE(count) != len) { + XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, aclp, + len); return ERR_PTR(-EFSCORRUPTED); + } acl = posix_acl_alloc(count, GFP_KERNEL); if (!acl) @@ -145,7 +154,7 @@ xfs_get_acl(struct inode *inode, int type) if (error != -ENOATTR) acl = ERR_PTR(error); } else { - acl = xfs_acl_from_disk(xfs_acl, len, + acl = xfs_acl_from_disk(ip->i_mount, xfs_acl, len, XFS_ACL_MAX_ENTRIES(ip->i_mount)); kmem_free(xfs_acl); } diff --git a/fs/xfs/xfs_attr_inactive.c b/fs/xfs/xfs_attr_inactive.c index f83f11d929e4..43ae392992e7 100644 --- a/fs/xfs/xfs_attr_inactive.c +++ b/fs/xfs/xfs_attr_inactive.c @@ -22,6 +22,7 @@ #include "xfs_attr_leaf.h" #include "xfs_quota.h" #include "xfs_dir2.h" +#include "xfs_error.h" /* * Look at all the extents for this logical region, @@ -209,6 +210,7 @@ xfs_attr3_node_inactive( */ if (level > XFS_DA_NODE_MAXDEPTH) { xfs_trans_brelse(*trans, bp); /* no locks for later trans */ + xfs_buf_corruption_error(bp); return -EFSCORRUPTED; } @@ -258,8 +260,9 @@ xfs_attr3_node_inactive( error = xfs_attr3_leaf_inactive(trans, dp, child_bp); break; default: - error = -EFSCORRUPTED; + xfs_buf_corruption_error(child_bp); xfs_trans_brelse(*trans, child_bp); + error = -EFSCORRUPTED; break; } if (error) @@ -342,6 +345,7 @@ xfs_attr3_root_inactive( break; default: error = -EFSCORRUPTED; + xfs_buf_corruption_error(bp); xfs_trans_brelse(*trans, bp); break; } diff --git a/fs/xfs/xfs_attr_list.c b/fs/xfs/xfs_attr_list.c index 00758fdc2fec..8b9b500e75e8 100644 --- a/fs/xfs/xfs_attr_list.c +++ b/fs/xfs/xfs_attr_list.c @@ -258,8 +258,10 @@ xfs_attr_node_list_lookup( return 0; /* We can't point back to the root. */ - if (cursor->blkno == 0) + if (cursor->blkno == 0) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, mp); return -EFSCORRUPTED; + } } if (expected_level != 0) @@ -269,6 +271,7 @@ xfs_attr_node_list_lookup( return 0; out_corruptbuf: + xfs_buf_corruption_error(bp); xfs_trans_brelse(tp, bp); return -EFSCORRUPTED; } diff --git a/fs/xfs/xfs_bmap_item.c b/fs/xfs/xfs_bmap_item.c index d84339c91466..243e5e0f82a3 100644 --- a/fs/xfs/xfs_bmap_item.c +++ b/fs/xfs/xfs_bmap_item.c @@ -21,7 +21,7 @@ #include "xfs_icache.h" #include "xfs_bmap_btree.h" #include "xfs_trans_space.h" - +#include "xfs_error.h" kmem_zone_t *xfs_bui_zone; kmem_zone_t *xfs_bud_zone; @@ -525,6 +525,7 @@ xfs_bui_recover( type = bui_type; break; default: + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, mp); error = -EFSCORRUPTED; goto err_inode; } diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c index 0b156cc88108..d8cdb27fe6ed 100644 --- a/fs/xfs/xfs_error.c +++ b/fs/xfs/xfs_error.c @@ -341,6 +341,27 @@ xfs_corruption_error( xfs_alert(mp, "Corruption detected. Unmount and run xfs_repair"); } +/* + * Complain about the kinds of metadata corruption that we can't detect from a + * verifier, such as incorrect inter-block relationship data. Does not set + * bp->b_error. + */ +void +xfs_buf_corruption_error( + struct xfs_buf *bp) +{ + struct xfs_mount *mp = bp->b_mount; + + xfs_alert_tag(mp, XFS_PTAG_VERIFIER_ERROR, + "Metadata corruption detected at %pS, %s block 0x%llx", + __return_address, bp->b_ops->name, bp->b_bn); + + xfs_alert(mp, "Unmount and run xfs_repair"); + + if (xfs_error_level >= XFS_ERRLEVEL_HIGH) + xfs_stack_trace(); +} + /* * Warnings specifically for verifier errors. Differentiate CRC vs. invalid * values, and omit the stack trace unless the error level is tuned high. diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h index e6a22cfb542f..c319379f7d1a 100644 --- a/fs/xfs/xfs_error.h +++ b/fs/xfs/xfs_error.h @@ -15,6 +15,7 @@ extern void xfs_corruption_error(const char *tag, int level, struct xfs_mount *mp, const void *buf, size_t bufsize, const char *filename, int linenum, xfs_failaddr_t failaddr); +void xfs_buf_corruption_error(struct xfs_buf *bp); extern void xfs_buf_verifier_error(struct xfs_buf *bp, int error, const char *name, const void *buf, size_t bufsz, xfs_failaddr_t failaddr); diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index 1b3ade30ef65..a05a1074e8f8 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -21,7 +21,7 @@ #include "xfs_alloc.h" #include "xfs_bmap.h" #include "xfs_trace.h" - +#include "xfs_error.h" kmem_zone_t *xfs_efi_zone; kmem_zone_t *xfs_efd_zone; @@ -228,6 +228,7 @@ xfs_efi_copy_format(xfs_log_iovec_t *buf, xfs_efi_log_format_t *dst_efi_fmt) } return 0; } + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, NULL); return -EFSCORRUPTED; } diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 8990be13a16c..70c5050463a6 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2149,8 +2149,10 @@ xfs_iunlink_update_bucket( * passed in because either we're adding or removing ourselves from the * head of the list. */ - if (old_value == new_agino) + if (old_value == new_agino) { + xfs_buf_corruption_error(agibp); return -EFSCORRUPTED; + } agi->agi_unlinked[bucket_index] = cpu_to_be32(new_agino); offset = offsetof(struct xfs_agi, agi_unlinked) + @@ -2213,6 +2215,8 @@ xfs_iunlink_update_inode( /* Make sure the old pointer isn't garbage. */ old_value = be32_to_cpu(dip->di_next_unlinked); if (!xfs_verify_agino_or_null(mp, agno, old_value)) { + xfs_inode_verifier_error(ip, -EFSCORRUPTED, __func__, dip, + sizeof(*dip), __this_address); error = -EFSCORRUPTED; goto out; } @@ -2224,8 +2228,11 @@ xfs_iunlink_update_inode( */ *old_next_agino = old_value; if (old_value == next_agino) { - if (next_agino != NULLAGINO) + if (next_agino != NULLAGINO) { + xfs_inode_verifier_error(ip, -EFSCORRUPTED, __func__, + dip, sizeof(*dip), __this_address); error = -EFSCORRUPTED; + } goto out; } @@ -2276,8 +2283,10 @@ xfs_iunlink( */ next_agino = be32_to_cpu(agi->agi_unlinked[bucket_index]); if (next_agino == agino || - !xfs_verify_agino_or_null(mp, agno, next_agino)) + !xfs_verify_agino_or_null(mp, agno, next_agino)) { + xfs_buf_corruption_error(agibp); return -EFSCORRUPTED; + } if (next_agino != NULLAGINO) { struct xfs_perag *pag; diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c index bb8f076805b9..726aa3bfd6e8 100644 --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -17,6 +17,7 @@ #include "xfs_trans_priv.h" #include "xfs_buf_item.h" #include "xfs_log.h" +#include "xfs_error.h" #include @@ -828,8 +829,10 @@ xfs_inode_item_format_convert( { struct xfs_inode_log_format_32 *in_f32 = buf->i_addr; - if (buf->i_len != sizeof(*in_f32)) + if (buf->i_len != sizeof(*in_f32)) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, NULL); return -EFSCORRUPTED; + } in_f->ilf_type = in_f32->ilf_type; in_f->ilf_size = in_f32->ilf_size; diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index ca8c763902b9..80dd05f8f1af 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -20,6 +20,7 @@ #include "xfs_symlink.h" #include "xfs_dir2.h" #include "xfs_iomap.h" +#include "xfs_error.h" #include #include @@ -470,17 +471,20 @@ xfs_vn_get_link_inline( struct inode *inode, struct delayed_call *done) { + struct xfs_inode *ip = XFS_I(inode); char *link; - ASSERT(XFS_I(inode)->i_df.if_flags & XFS_IFINLINE); + ASSERT(ip->i_df.if_flags & XFS_IFINLINE); /* * The VFS crashes on a NULL pointer, so return -EFSCORRUPTED if * if_data is junk. */ - link = XFS_I(inode)->i_df.if_u1.if_data; - if (!link) + link = ip->i_df.if_u1.if_data; + if (!link) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, ip->i_mount); return ERR_PTR(-EFSCORRUPTED); + } return link; } diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 796bbc9dd8b0..02f2147952b3 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -3537,6 +3537,7 @@ xfs_cui_copy_format( memcpy(dst_cui_fmt, src_cui_fmt, len); return 0; } + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, NULL); return -EFSCORRUPTED; } @@ -3601,8 +3602,10 @@ xlog_recover_cud_pass2( struct xfs_ail *ailp = log->l_ailp; cud_formatp = item->ri_buf[0].i_addr; - if (item->ri_buf[0].i_len != sizeof(struct xfs_cud_log_format)) + if (item->ri_buf[0].i_len != sizeof(struct xfs_cud_log_format)) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp); return -EFSCORRUPTED; + } cui_id = cud_formatp->cud_cui_id; /* @@ -3654,6 +3657,7 @@ xfs_bui_copy_format( memcpy(dst_bui_fmt, src_bui_fmt, len); return 0; } + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, NULL); return -EFSCORRUPTED; } @@ -3677,8 +3681,10 @@ xlog_recover_bui_pass2( bui_formatp = item->ri_buf[0].i_addr; - if (bui_formatp->bui_nextents != XFS_BUI_MAX_FAST_EXTENTS) + if (bui_formatp->bui_nextents != XFS_BUI_MAX_FAST_EXTENTS) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp); return -EFSCORRUPTED; + } buip = xfs_bui_init(mp); error = xfs_bui_copy_format(&item->ri_buf[0], &buip->bui_format); if (error) { @@ -3720,8 +3726,10 @@ xlog_recover_bud_pass2( struct xfs_ail *ailp = log->l_ailp; bud_formatp = item->ri_buf[0].i_addr; - if (item->ri_buf[0].i_len != sizeof(struct xfs_bud_log_format)) + if (item->ri_buf[0].i_len != sizeof(struct xfs_bud_log_format)) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp); return -EFSCORRUPTED; + } bui_id = bud_formatp->bud_bui_id; /* @@ -5181,8 +5189,10 @@ xlog_recover_process( * If the filesystem is CRC enabled, this mismatch becomes a * fatal log corruption failure. */ - if (xfs_sb_version_hascrc(&log->l_mp->m_sb)) + if (xfs_sb_version_hascrc(&log->l_mp->m_sb)) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp); return -EFSCORRUPTED; + } } xlog_unpack_data(rhead, dp, log); @@ -5305,8 +5315,11 @@ xlog_do_recovery_pass( "invalid iclog size (%d bytes), using lsunit (%d bytes)", h_size, log->l_mp->m_logbsize); h_size = log->l_mp->m_logbsize; - } else + } else { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, + log->l_mp); return -EFSCORRUPTED; + } } if ((be32_to_cpu(rhead->h_version) & XLOG_VERSION_2) && diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c index ecd8ce152ab1..66ea8e4fca86 100644 --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -22,6 +22,7 @@ #include "xfs_qm.h" #include "xfs_trace.h" #include "xfs_icache.h" +#include "xfs_error.h" /* * The global quota manager. There is only one of these for the entire @@ -754,11 +755,19 @@ xfs_qm_qino_alloc( if ((flags & XFS_QMOPT_PQUOTA) && (mp->m_sb.sb_gquotino != NULLFSINO)) { ino = mp->m_sb.sb_gquotino; - ASSERT(mp->m_sb.sb_pquotino == NULLFSINO); + if (mp->m_sb.sb_pquotino != NULLFSINO) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, + mp); + return -EFSCORRUPTED; + } } else if ((flags & XFS_QMOPT_GQUOTA) && (mp->m_sb.sb_pquotino != NULLFSINO)) { ino = mp->m_sb.sb_pquotino; - ASSERT(mp->m_sb.sb_gquotino == NULLFSINO); + if (mp->m_sb.sb_gquotino != NULLFSINO) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, + mp); + return -EFSCORRUPTED; + } } if (ino != NULLFSINO) { error = xfs_iget(mp, NULL, ino, 0, 0, ip); diff --git a/fs/xfs/xfs_refcount_item.c b/fs/xfs/xfs_refcount_item.c index e22ac9cdb971..d5708d40ad87 100644 --- a/fs/xfs/xfs_refcount_item.c +++ b/fs/xfs/xfs_refcount_item.c @@ -17,7 +17,7 @@ #include "xfs_refcount_item.h" #include "xfs_log.h" #include "xfs_refcount.h" - +#include "xfs_error.h" kmem_zone_t *xfs_cui_zone; kmem_zone_t *xfs_cud_zone; @@ -536,6 +536,7 @@ xfs_cui_recover( type = refc_type; break; default: + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, mp); error = -EFSCORRUPTED; goto abort_error; } diff --git a/fs/xfs/xfs_rmap_item.c b/fs/xfs/xfs_rmap_item.c index af83e2b2a429..02f84d9a511c 100644 --- a/fs/xfs/xfs_rmap_item.c +++ b/fs/xfs/xfs_rmap_item.c @@ -17,7 +17,7 @@ #include "xfs_rmap_item.h" #include "xfs_log.h" #include "xfs_rmap.h" - +#include "xfs_error.h" kmem_zone_t *xfs_rui_zone; kmem_zone_t *xfs_rud_zone; @@ -171,8 +171,10 @@ xfs_rui_copy_format( src_rui_fmt = buf->i_addr; len = xfs_rui_log_format_sizeof(src_rui_fmt->rui_nextents); - if (buf->i_len != len) + if (buf->i_len != len) { + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, NULL); return -EFSCORRUPTED; + } memcpy(dst_rui_fmt, src_rui_fmt, len); return 0; @@ -581,6 +583,7 @@ xfs_rui_recover( type = XFS_RMAP_FREE; break; default: + XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, NULL); error = -EFSCORRUPTED; goto abort_error; } From 7a20c664a7d8059c3f98245f592207affb1d0208 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:49 +0530 Subject: [PATCH 107/116] xfs: fix some memory leaks in log recovery commit 050552cbe06a3a9c3f977dcf11ff998ae1d5c2d5 upstream. Fix a few places where we xlog_alloc_buffer a buffer, hit an error, and then bail out without freeing the buffer. Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_log_recover.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 02f2147952b3..248101876e1e 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1347,10 +1347,11 @@ xlog_find_tail( error = xlog_rseek_logrec_hdr(log, *head_blk, *head_blk, 1, buffer, &rhead_blk, &rhead, &wrapped); if (error < 0) - return error; + goto done; if (!error) { xfs_warn(log->l_mp, "%s: couldn't find sync record", __func__); - return -EFSCORRUPTED; + error = -EFSCORRUPTED; + goto done; } *tail_blk = BLOCK_LSN(be64_to_cpu(rhead->h_tail_lsn)); @@ -5318,7 +5319,8 @@ xlog_do_recovery_pass( } else { XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW, log->l_mp); - return -EFSCORRUPTED; + error = -EFSCORRUPTED; + goto bread_err1; } } From a95582d9d5007a8df0a8e2331654b7be0337ffc2 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Sat, 24 Sep 2022 18:26:50 +0530 Subject: [PATCH 108/116] xfs: stabilize insert range start boundary to avoid COW writeback race commit d0c2204135a0cdbc607c94c481cf1ccb2f659aa7 upstream. generic/522 (fsx) occasionally fails with a file corruption due to an insert range operation. The primary characteristic of the corruption is a misplaced insert range operation that differs from the requested target offset. The reason for this behavior is a race between the extent shift sequence of an insert range and a COW writeback completion that causes a front merge with the first extent in the shift. The shift preparation function flushes and unmaps from the target offset of the operation to the end of the file to ensure no modifications can be made and page cache is invalidated before file data is shifted. An insert range operation then splits the extent at the target offset, if necessary, and begins to shift the start offset of each extent starting from the end of the file to the start offset. The shift sequence operates at extent level and so depends on the preparation sequence to guarantee no changes can be made to the target range during the shift. If the block immediately prior to the target offset was dirty and shared, however, it can undergo writeback and move from the COW fork to the data fork at any point during the shift. If the block is contiguous with the block at the start offset of the insert range, it can front merge and alter the start offset of the extent. Once the shift sequence reaches the target offset, it shifts based on the latest start offset and silently changes the target offset of the operation and corrupts the file. To address this problem, update the shift preparation code to stabilize the start boundary along with the full range of the insert. Also update the existing corruption check to fail if any extent is shifted with a start offset behind the target offset of the insert range. This prevents insert from racing with COW writeback completion and fails loudly in the event of an unexpected extent shift. Signed-off-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/libxfs/xfs_bmap.c | 2 +- fs/xfs/xfs_bmap_util.c | 12 ++++++++++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index e7fa611887ad..8d035842fe51 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -5876,7 +5876,7 @@ xfs_bmap_insert_extents( XFS_WANT_CORRUPTED_GOTO(mp, !isnullstartblock(got.br_startblock), del_cursor); - if (stop_fsb >= got.br_startoff + got.br_blockcount) { + if (stop_fsb > got.br_startoff) { ASSERT(0); error = -EFSCORRUPTED; goto del_cursor; diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index d6d78e127625..113bed28bc31 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1167,6 +1167,7 @@ xfs_prepare_shift( struct xfs_inode *ip, loff_t offset) { + struct xfs_mount *mp = ip->i_mount; int error; /* @@ -1179,6 +1180,17 @@ xfs_prepare_shift( return error; } + /* + * Shift operations must stabilize the start block offset boundary along + * with the full range of the operation. If we don't, a COW writeback + * completion could race with an insert, front merge with the start + * extent (after split) during the shift and corrupt the file. Start + * with the block just prior to the start to stabilize the boundary. + */ + offset = round_down(offset, 1 << mp->m_sb.sb_blocklog); + if (offset) + offset -= (1 << mp->m_sb.sb_blocklog); + /* * Writeback and invalidate cache for the remainder of the file as we're * about to shift down every extent from offset to EOF. From 6363fdf7acac6884343f0e4cc3ffe0dc6beec7a7 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Sat, 24 Sep 2022 18:26:51 +0530 Subject: [PATCH 109/116] xfs: use bitops interface for buf log item AIL flag check commit 826f7e34130a4ce756138540170cbe935c537a47 upstream. The xfs_log_item flags were converted to atomic bitops as of commit 22525c17ed ("xfs: log item flags are racy"). The assert check for AIL presence in xfs_buf_item_relse() still uses the old value based check. This likely went unnoticed as XFS_LI_IN_AIL evaluates to 0 and causes the assert to unconditionally pass. Fix up the check. Signed-off-by: Brian Foster Fixes: 22525c17ed ("xfs: log item flags are racy") Reviewed-by: Eric Sandeen Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_buf_item.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index d74fbd1e9d3e..b1452117e442 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -956,7 +956,7 @@ xfs_buf_item_relse( struct xfs_buf_log_item *bip = bp->b_log_item; trace_xfs_buf_item_relse(bp, _RET_IP_); - ASSERT(!(bip->bli_item.li_flags & XFS_LI_IN_AIL)); + ASSERT(!test_bit(XFS_LI_IN_AIL, &bip->bli_item.li_flags)); bp->b_log_item = NULL; if (list_empty(&bp->b_li_list)) From fd6c5da3fa2b2dd1af3ff00f8c0e1427c6cf2662 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:52 +0530 Subject: [PATCH 110/116] xfs: refactor agfl length computation function commit 1cac233cfe71f21e069705a4930c18e48d897be6 upstream. Refactor xfs_alloc_min_freelist to accept a NULL @pag argument, in which case it returns the largest possible minimum length. This will be used in an upcoming patch to compute the length of the AGFL at mkfs time. Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/libxfs/xfs_alloc.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index f1cdf5fbaa71..084d39d8856b 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -1998,24 +1998,32 @@ xfs_alloc_longest_free_extent( return pag->pagf_flcount > 0 || pag->pagf_longest > 0; } +/* + * Compute the minimum length of the AGFL in the given AG. If @pag is NULL, + * return the largest possible minimum length. + */ unsigned int xfs_alloc_min_freelist( struct xfs_mount *mp, struct xfs_perag *pag) { + /* AG btrees have at least 1 level. */ + static const uint8_t fake_levels[XFS_BTNUM_AGF] = {1, 1, 1}; + const uint8_t *levels = pag ? pag->pagf_levels : fake_levels; unsigned int min_free; + ASSERT(mp->m_ag_maxlevels > 0); + /* space needed by-bno freespace btree */ - min_free = min_t(unsigned int, pag->pagf_levels[XFS_BTNUM_BNOi] + 1, + min_free = min_t(unsigned int, levels[XFS_BTNUM_BNOi] + 1, mp->m_ag_maxlevels); /* space needed by-size freespace btree */ - min_free += min_t(unsigned int, pag->pagf_levels[XFS_BTNUM_CNTi] + 1, + min_free += min_t(unsigned int, levels[XFS_BTNUM_CNTi] + 1, mp->m_ag_maxlevels); /* space needed reverse mapping used space btree */ if (xfs_sb_version_hasrmapbt(&mp->m_sb)) - min_free += min_t(unsigned int, - pag->pagf_levels[XFS_BTNUM_RMAPi] + 1, - mp->m_rmap_maxlevels); + min_free += min_t(unsigned int, levels[XFS_BTNUM_RMAPi] + 1, + mp->m_rmap_maxlevels); return min_free; } From 4668f08cda3039a966caa74846f92283b5eff547 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:53 +0530 Subject: [PATCH 111/116] xfs: split the sunit parameter update into two parts commit 4f5b1b3a8fa07dc8ecedfaf539b3deed8931a73e upstream. If the administrator provided a sunit= mount option, we need to validate the raw parameter, convert the mount option units (512b blocks) into the internal unit (fs blocks), and then validate that the (now cooked) parameter doesn't screw anything up on disk. The incore inode geometry computation can depend on the new sunit option, but a subsequent patch will make validating the cooked value depends on the computed inode geometry, so break the sunit update into two steps. Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_mount.c | 135 ++++++++++++++++++++++++++------------------- 1 file changed, 78 insertions(+), 57 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 5a0ce0c2c4bb..5c2539e13a0b 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -365,66 +365,76 @@ release_buf: } /* - * Update alignment values based on mount options and sb values + * If we were provided with new sunit/swidth values as mount options, make sure + * that they pass basic alignment and superblock feature checks, and convert + * them into the same units (FSB) that everything else expects. This step + * /must/ be done before computing the inode geometry. */ STATIC int -xfs_update_alignment(xfs_mount_t *mp) +xfs_validate_new_dalign( + struct xfs_mount *mp) { - xfs_sb_t *sbp = &(mp->m_sb); + if (mp->m_dalign == 0) + return 0; + + /* + * If stripe unit and stripe width are not multiples + * of the fs blocksize turn off alignment. + */ + if ((BBTOB(mp->m_dalign) & mp->m_blockmask) || + (BBTOB(mp->m_swidth) & mp->m_blockmask)) { + xfs_warn(mp, + "alignment check failed: sunit/swidth vs. blocksize(%d)", + mp->m_sb.sb_blocksize); + return -EINVAL; + } else { + /* + * Convert the stripe unit and width to FSBs. + */ + mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign); + if (mp->m_dalign && (mp->m_sb.sb_agblocks % mp->m_dalign)) { + xfs_warn(mp, + "alignment check failed: sunit/swidth vs. agsize(%d)", + mp->m_sb.sb_agblocks); + return -EINVAL; + } else if (mp->m_dalign) { + mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth); + } else { + xfs_warn(mp, + "alignment check failed: sunit(%d) less than bsize(%d)", + mp->m_dalign, mp->m_sb.sb_blocksize); + return -EINVAL; + } + } + + if (!xfs_sb_version_hasdalign(&mp->m_sb)) { + xfs_warn(mp, +"cannot change alignment: superblock does not support data alignment"); + return -EINVAL; + } + + return 0; +} + +/* Update alignment values based on mount options and sb values. */ +STATIC int +xfs_update_alignment( + struct xfs_mount *mp) +{ + struct xfs_sb *sbp = &mp->m_sb; if (mp->m_dalign) { - /* - * If stripe unit and stripe width are not multiples - * of the fs blocksize turn off alignment. - */ - if ((BBTOB(mp->m_dalign) & mp->m_blockmask) || - (BBTOB(mp->m_swidth) & mp->m_blockmask)) { - xfs_warn(mp, - "alignment check failed: sunit/swidth vs. blocksize(%d)", - sbp->sb_blocksize); - return -EINVAL; - } else { - /* - * Convert the stripe unit and width to FSBs. - */ - mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign); - if (mp->m_dalign && (sbp->sb_agblocks % mp->m_dalign)) { - xfs_warn(mp, - "alignment check failed: sunit/swidth vs. agsize(%d)", - sbp->sb_agblocks); - return -EINVAL; - } else if (mp->m_dalign) { - mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth); - } else { - xfs_warn(mp, - "alignment check failed: sunit(%d) less than bsize(%d)", - mp->m_dalign, sbp->sb_blocksize); - return -EINVAL; - } - } + if (sbp->sb_unit == mp->m_dalign && + sbp->sb_width == mp->m_swidth) + return 0; - /* - * Update superblock with new values - * and log changes - */ - if (xfs_sb_version_hasdalign(sbp)) { - if (sbp->sb_unit != mp->m_dalign) { - sbp->sb_unit = mp->m_dalign; - mp->m_update_sb = true; - } - if (sbp->sb_width != mp->m_swidth) { - sbp->sb_width = mp->m_swidth; - mp->m_update_sb = true; - } - } else { - xfs_warn(mp, - "cannot change alignment: superblock does not support data alignment"); - return -EINVAL; - } + sbp->sb_unit = mp->m_dalign; + sbp->sb_width = mp->m_swidth; + mp->m_update_sb = true; } else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN && xfs_sb_version_hasdalign(&mp->m_sb)) { - mp->m_dalign = sbp->sb_unit; - mp->m_swidth = sbp->sb_width; + mp->m_dalign = sbp->sb_unit; + mp->m_swidth = sbp->sb_width; } return 0; @@ -692,12 +702,12 @@ xfs_mountfs( } /* - * Check if sb_agblocks is aligned at stripe boundary - * If sb_agblocks is NOT aligned turn off m_dalign since - * allocator alignment is within an ag, therefore ag has - * to be aligned at stripe boundary. + * If we were given new sunit/swidth options, do some basic validation + * checks and convert the incore dalign and swidth values to the + * same units (FSB) that everything else uses. This /must/ happen + * before computing the inode geometry. */ - error = xfs_update_alignment(mp); + error = xfs_validate_new_dalign(mp); if (error) goto out; @@ -708,6 +718,17 @@ xfs_mountfs( xfs_rmapbt_compute_maxlevels(mp); xfs_refcountbt_compute_maxlevels(mp); + /* + * Check if sb_agblocks is aligned at stripe boundary. If sb_agblocks + * is NOT aligned turn off m_dalign since allocator alignment is within + * an ag, therefore ag has to be aligned at stripe boundary. Note that + * we must compute the free space and rmap btree geometry before doing + * this. + */ + error = xfs_update_alignment(mp); + if (error) + goto out; + /* enable fail_at_unmount as default */ mp->m_fail_unmount = true; From 37ec5a20c80d3fb3a4022e16710ace3db393e05b Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:54 +0530 Subject: [PATCH 112/116] xfs: don't commit sunit/swidth updates to disk if that would cause repair failures commit 13eaec4b2adf2657b8167b67e27c97cc7314d923 upstream. Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit and swidth values could cause xfs_repair to fail loudly. The problem here is that repair calculates the where mkfs should have allocated the root inode, based on the superblock geometry. The allocation decisions depend on sunit, which means that we really can't go updating sunit if it would lead to a subsequent repair failure on an otherwise correct filesystem. Port from xfs_repair some code that computes the location of the root inode and teach mount to skip the ondisk update if it would cause problems for repair. Along the way we'll update the documentation, provide a function for computing the minimum AGFL size instead of open-coding it, and cut down some indenting in the mount code. Note that we allow the mount to proceed (and new allocations will reflect this new geometry) because we've never screened this kind of thing before. We'll have to wait for a new future incompat feature to enforce correct behavior, alas. Note that the geometry reporting always uses the superblock values, not the incore ones, so that is what xfs_info and xfs_growfs will report. [1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d Reported-by: Alex Lyakas Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/libxfs/xfs_ialloc.c | 64 ++++++++++++++++++++++++++++++++++++++ fs/xfs/libxfs/xfs_ialloc.h | 1 + fs/xfs/xfs_mount.c | 45 ++++++++++++++++++++++++++- fs/xfs/xfs_trace.h | 21 +++++++++++++ 4 files changed, 130 insertions(+), 1 deletion(-) diff --git a/fs/xfs/libxfs/xfs_ialloc.c b/fs/xfs/libxfs/xfs_ialloc.c index 443cf33f6666..c3e0c2f61be4 100644 --- a/fs/xfs/libxfs/xfs_ialloc.c +++ b/fs/xfs/libxfs/xfs_ialloc.c @@ -2854,3 +2854,67 @@ xfs_ialloc_setup_geometry( else igeo->ialloc_align = 0; } + +/* Compute the location of the root directory inode that is laid out by mkfs. */ +xfs_ino_t +xfs_ialloc_calc_rootino( + struct xfs_mount *mp, + int sunit) +{ + struct xfs_ino_geometry *igeo = M_IGEO(mp); + xfs_agblock_t first_bno; + + /* + * Pre-calculate the geometry of AG 0. We know what it looks like + * because libxfs knows how to create allocation groups now. + * + * first_bno is the first block in which mkfs could possibly have + * allocated the root directory inode, once we factor in the metadata + * that mkfs formats before it. Namely, the four AG headers... + */ + first_bno = howmany(4 * mp->m_sb.sb_sectsize, mp->m_sb.sb_blocksize); + + /* ...the two free space btree roots... */ + first_bno += 2; + + /* ...the inode btree root... */ + first_bno += 1; + + /* ...the initial AGFL... */ + first_bno += xfs_alloc_min_freelist(mp, NULL); + + /* ...the free inode btree root... */ + if (xfs_sb_version_hasfinobt(&mp->m_sb)) + first_bno++; + + /* ...the reverse mapping btree root... */ + if (xfs_sb_version_hasrmapbt(&mp->m_sb)) + first_bno++; + + /* ...the reference count btree... */ + if (xfs_sb_version_hasreflink(&mp->m_sb)) + first_bno++; + + /* + * ...and the log, if it is allocated in the first allocation group. + * + * This can happen with filesystems that only have a single + * allocation group, or very odd geometries created by old mkfs + * versions on very small filesystems. + */ + if (mp->m_sb.sb_logstart && + XFS_FSB_TO_AGNO(mp, mp->m_sb.sb_logstart) == 0) + first_bno += mp->m_sb.sb_logblocks; + + /* + * Now round first_bno up to whatever allocation alignment is given + * by the filesystem or was passed in. + */ + if (xfs_sb_version_hasdalign(&mp->m_sb) && igeo->ialloc_align > 0) + first_bno = roundup(first_bno, sunit); + else if (xfs_sb_version_hasalign(&mp->m_sb) && + mp->m_sb.sb_inoalignmt > 1) + first_bno = roundup(first_bno, mp->m_sb.sb_inoalignmt); + + return XFS_AGINO_TO_INO(mp, 0, XFS_AGB_TO_AGINO(mp, first_bno)); +} diff --git a/fs/xfs/libxfs/xfs_ialloc.h b/fs/xfs/libxfs/xfs_ialloc.h index 323592d563d5..72b3468b97b1 100644 --- a/fs/xfs/libxfs/xfs_ialloc.h +++ b/fs/xfs/libxfs/xfs_ialloc.h @@ -152,5 +152,6 @@ int xfs_inobt_insert_rec(struct xfs_btree_cur *cur, uint16_t holemask, int xfs_ialloc_cluster_alignment(struct xfs_mount *mp); void xfs_ialloc_setup_geometry(struct xfs_mount *mp); +xfs_ino_t xfs_ialloc_calc_rootino(struct xfs_mount *mp, int sunit); #endif /* __XFS_IALLOC_H__ */ diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 5c2539e13a0b..bbcf48a625b2 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -31,7 +31,7 @@ #include "xfs_reflink.h" #include "xfs_extent_busy.h" #include "xfs_health.h" - +#include "xfs_trace.h" static DEFINE_MUTEX(xfs_uuid_table_mutex); static int xfs_uuid_table_size; @@ -364,6 +364,42 @@ release_buf: return error; } +/* + * If the sunit/swidth change would move the precomputed root inode value, we + * must reject the ondisk change because repair will stumble over that. + * However, we allow the mount to proceed because we never rejected this + * combination before. Returns true to update the sb, false otherwise. + */ +static inline int +xfs_check_new_dalign( + struct xfs_mount *mp, + int new_dalign, + bool *update_sb) +{ + struct xfs_sb *sbp = &mp->m_sb; + xfs_ino_t calc_ino; + + calc_ino = xfs_ialloc_calc_rootino(mp, new_dalign); + trace_xfs_check_new_dalign(mp, new_dalign, calc_ino); + + if (sbp->sb_rootino == calc_ino) { + *update_sb = true; + return 0; + } + + xfs_warn(mp, +"Cannot change stripe alignment; would require moving root inode."); + + /* + * XXX: Next time we add a new incompat feature, this should start + * returning -EINVAL to fail the mount. Until then, spit out a warning + * that we're ignoring the administrator's instructions. + */ + xfs_warn(mp, "Skipping superblock stripe alignment update."); + *update_sb = false; + return 0; +} + /* * If we were provided with new sunit/swidth values as mount options, make sure * that they pass basic alignment and superblock feature checks, and convert @@ -424,10 +460,17 @@ xfs_update_alignment( struct xfs_sb *sbp = &mp->m_sb; if (mp->m_dalign) { + bool update_sb; + int error; + if (sbp->sb_unit == mp->m_dalign && sbp->sb_width == mp->m_swidth) return 0; + error = xfs_check_new_dalign(mp, mp->m_dalign, &update_sb); + if (error || !update_sb) + return error; + sbp->sb_unit = mp->m_dalign; sbp->sb_width = mp->m_swidth; mp->m_update_sb = true; diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h index eaae275ed430..ffb398c1de69 100644 --- a/fs/xfs/xfs_trace.h +++ b/fs/xfs/xfs_trace.h @@ -3609,6 +3609,27 @@ DEFINE_KMEM_EVENT(kmem_alloc_large); DEFINE_KMEM_EVENT(kmem_realloc); DEFINE_KMEM_EVENT(kmem_zone_alloc); +TRACE_EVENT(xfs_check_new_dalign, + TP_PROTO(struct xfs_mount *mp, int new_dalign, xfs_ino_t calc_rootino), + TP_ARGS(mp, new_dalign, calc_rootino), + TP_STRUCT__entry( + __field(dev_t, dev) + __field(int, new_dalign) + __field(xfs_ino_t, sb_rootino) + __field(xfs_ino_t, calc_rootino) + ), + TP_fast_assign( + __entry->dev = mp->m_super->s_dev; + __entry->new_dalign = new_dalign; + __entry->sb_rootino = mp->m_sb.sb_rootino; + __entry->calc_rootino = calc_rootino; + ), + TP_printk("dev %d:%d new_dalign %d sb_rootino %llu calc_rootino %llu", + MAJOR(__entry->dev), MINOR(__entry->dev), + __entry->new_dalign, __entry->sb_rootino, + __entry->calc_rootino) +) + #endif /* _TRACE_XFS_H */ #undef TRACE_INCLUDE_PATH From 8b3c9eb1b3dd8f0f6d45224964f42cff99eaac61 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:55 +0530 Subject: [PATCH 113/116] xfs: fix an ABBA deadlock in xfs_rename commit 6da1b4b1ab36d80a3994fd4811c8381de10af604 upstream. When overlayfs is running on top of xfs and the user unlinks a file in the overlay, overlayfs will create a whiteout inode and ask xfs to "rename" the whiteout file atop the one being unlinked. If the file being unlinked loses its one nlink, we then have to put the inode on the unlinked list. This requires us to grab the AGI buffer of the whiteout inode to take it off the unlinked list (which is where whiteouts are created) and to grab the AGI buffer of the file being deleted. If the whiteout was created in a higher numbered AG than the file being deleted, we'll lock the AGIs in the wrong order and deadlock. Therefore, grab all the AGI locks we think we'll need ahead of time, and in order of increasing AG number per the locking rules. Reported-by: wenli xie Fixes: 93597ae8dac0 ("xfs: Fix deadlock between AGI and AGF when target_ip exists in xfs_rename()") Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/libxfs/xfs_dir2.h | 2 -- fs/xfs/libxfs/xfs_dir2_sf.c | 2 +- fs/xfs/xfs_inode.c | 42 ++++++++++++++++++++++--------------- 3 files changed, 26 insertions(+), 20 deletions(-) diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h index 01b1722333a9..f54244779492 100644 --- a/fs/xfs/libxfs/xfs_dir2.h +++ b/fs/xfs/libxfs/xfs_dir2.h @@ -124,8 +124,6 @@ extern int xfs_dir_lookup(struct xfs_trans *tp, struct xfs_inode *dp, extern int xfs_dir_removename(struct xfs_trans *tp, struct xfs_inode *dp, struct xfs_name *name, xfs_ino_t ino, xfs_extlen_t tot); -extern bool xfs_dir2_sf_replace_needblock(struct xfs_inode *dp, - xfs_ino_t inum); extern int xfs_dir_replace(struct xfs_trans *tp, struct xfs_inode *dp, struct xfs_name *name, xfs_ino_t inum, xfs_extlen_t tot); diff --git a/fs/xfs/libxfs/xfs_dir2_sf.c b/fs/xfs/libxfs/xfs_dir2_sf.c index 90eff6c2de7e..f980c3f3d2f6 100644 --- a/fs/xfs/libxfs/xfs_dir2_sf.c +++ b/fs/xfs/libxfs/xfs_dir2_sf.c @@ -947,7 +947,7 @@ xfs_dir2_sf_removename( /* * Check whether the sf dir replace operation need more blocks. */ -bool +static bool xfs_dir2_sf_replace_needblock( struct xfs_inode *dp, xfs_ino_t inum) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 70c5050463a6..7b72c189cff0 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -3224,7 +3224,7 @@ xfs_rename( struct xfs_trans *tp; struct xfs_inode *wip = NULL; /* whiteout inode */ struct xfs_inode *inodes[__XFS_SORT_INODES]; - struct xfs_buf *agibp; + int i; int num_inodes = __XFS_SORT_INODES; bool new_parent = (src_dp != target_dp); bool src_is_directory = S_ISDIR(VFS_I(src_ip)->i_mode); @@ -3336,6 +3336,30 @@ xfs_rename( } } + /* + * Lock the AGI buffers we need to handle bumping the nlink of the + * whiteout inode off the unlinked list and to handle dropping the + * nlink of the target inode. Per locking order rules, do this in + * increasing AG order and before directory block allocation tries to + * grab AGFs because we grab AGIs before AGFs. + * + * The (vfs) caller must ensure that if src is a directory then + * target_ip is either null or an empty directory. + */ + for (i = 0; i < num_inodes && inodes[i] != NULL; i++) { + if (inodes[i] == wip || + (inodes[i] == target_ip && + (VFS_I(target_ip)->i_nlink == 1 || src_is_directory))) { + struct xfs_buf *bp; + xfs_agnumber_t agno; + + agno = XFS_INO_TO_AGNO(mp, inodes[i]->i_ino); + error = xfs_read_agi(mp, tp, agno, &bp); + if (error) + goto out_trans_cancel; + } + } + /* * Directory entry creation below may acquire the AGF. Remove * the whiteout from the unlinked list first to preserve correct @@ -3389,22 +3413,6 @@ xfs_rename( * In case there is already an entry with the same * name at the destination directory, remove it first. */ - - /* - * Check whether the replace operation will need to allocate - * blocks. This happens when the shortform directory lacks - * space and we have to convert it to a block format directory. - * When more blocks are necessary, we must lock the AGI first - * to preserve locking order (AGI -> AGF). - */ - if (xfs_dir2_sf_replace_needblock(target_dp, src_ip->i_ino)) { - error = xfs_read_agi(mp, tp, - XFS_INO_TO_AGNO(mp, target_ip->i_ino), - &agibp); - if (error) - goto out_trans_cancel; - } - error = xfs_dir_replace(tp, target_dp, target_name, src_ip->i_ino, spaceres); if (error) From 26e7c965f41bd34e069c3c113fa5b297d972c30b Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sat, 24 Sep 2022 18:26:56 +0530 Subject: [PATCH 114/116] xfs: fix use-after-free when aborting corrupt attr inactivation commit 496b9bcd62b0b3a160be61e3265a086f97adcbd3 upstream. Log the corrupt buffer before we release the buffer. Fixes: a5155b870d687 ("xfs: always log corruption errors") Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman --- fs/xfs/xfs_attr_inactive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr_inactive.c b/fs/xfs/xfs_attr_inactive.c index 43ae392992e7..766b1386402a 100644 --- a/fs/xfs/xfs_attr_inactive.c +++ b/fs/xfs/xfs_attr_inactive.c @@ -209,8 +209,8 @@ xfs_attr3_node_inactive( * Since this code is recursive (gasp!) we must protect ourselves. */ if (level > XFS_DA_NODE_MAXDEPTH) { - xfs_trans_brelse(*trans, bp); /* no locks for later trans */ xfs_buf_corruption_error(bp); + xfs_trans_brelse(*trans, bp); /* no locks for later trans */ return -EFSCORRUPTED; } From 579976dc0d9fdab7fe7c60af33fb0d2eec5f87ae Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 8 Sep 2022 11:21:26 +0200 Subject: [PATCH 115/116] ext4: make directory inode spreading reflect flexbg size commit 613c5a85898d1cd44e68f28d65eccf64a8ace9cf upstream. Currently the Orlov inode allocator searches for free inodes for a directory only in flex block groups with at most inodes_per_group/16 more directory inodes than average per flex block group. However with growing size of flex block group this becomes unnecessarily strict. Scale allowed difference from average directory count per flex block group with flex block group size as we do with other metrics. Tested-by: Stefan Wahren Tested-by: Ojaswin Mujoo Cc: stable@kernel.org Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/ialloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 83846cc81485..cbde5a096c7b 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -500,7 +500,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent, goto fallback; } - max_dirs = ndirs / ngroups + inodes_per_group / 16; + max_dirs = ndirs / ngroups + inodes_per_group*flex_size / 16; min_inodes = avefreei - inodes_per_group*flex_size / 4; if (min_inodes < 1) min_inodes = 1; From 6215647d9699cb8f1bf7333ec849242c4a9cf9a6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Sep 2022 11:04:12 +0200 Subject: [PATCH 116/116] Linux 5.4.215 Link: https://lore.kernel.org/r/20220926100750.519221159@linuxfoundation.org Tested-by: Shuah Khan Link: https://lore.kernel.org/r/20220926163546.791705298@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Tested-by: Guenter Roeck Tested-by: Hulk Robot Tested-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 59f34d7f6f3b..0c501d2c6a3b 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 4 -SUBLEVEL = 214 +SUBLEVEL = 215 EXTRAVERSION = NAME = Kleptomaniac Octopus