From 7b224db0db269a116134f367b565723e0b01ff9b Mon Sep 17 00:00:00 2001
From: Santosh Dronamraju <sdronamr@qti.qualcomm.com>
Date: Thu, 10 Sep 2020 22:08:27 +0530
Subject: [PATCH] ARM: dts: msm: Add dtsi entry for ssg hlos drivers

The following changes are added:
1. Add qseecom node for msmnile
2. Enable QRNG driver for msmnile.
3. Add shmbridge node for msmnile.
4. Add smcinvoke node for msmnile.
5. Add tz_log node for msmnile.

Change-Id: I7573b3acead185dd0100f9862c2348ab25c2cf76
---
 qcom/sm8150.dtsi | 51 ++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 49 insertions(+), 2 deletions(-)

diff --git a/qcom/sm8150.dtsi b/qcom/sm8150.dtsi
index cee47b76149d..695d937a5ee6 100644
--- a/qcom/sm8150.dtsi
+++ b/qcom/sm8150.dtsi
@@ -329,8 +329,10 @@
 
 		qseecom_mem: qseecom_region {
 			compatible = "shared-dma-pool";
-			no-map;
-			reg = <0x0 0x9e400000 0x0 0x1400000>;
+			alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
+			reusable;
+			alignment = <0x0 0x400000>;
+			size = <0x0 0x1400000>;
 		};
 
 		cdsp_sec_mem: cdsp_sec_regions {
@@ -2366,6 +2368,51 @@
 			qcom,dump-id = <0x127>;
 		};
 	};
+	qtee_shmbridge {
+		compatible = "qcom,tee-shared-memory-bridge";
+	};
+
+	qcom_qseecom: qseecom@87900000 {
+		compatible = "qcom,qseecom";
+		reg = <0x87900000 0x2200000>;
+		reg-names = "secapp-region";
+		memory-region = <&qseecom_mem>;
+		qcom,hlos-num-ce-hw-instances = <1>;
+		qcom,hlos-ce-hw-instance = <0>;
+		qcom,qsee-ce-hw-instance = <0>;
+		qcom,disk-encrypt-pipe-pair = <2>;
+		qcom,support-fde;
+		qcom,no-clock-support;
+		qcom,fde-key-size;
+		qcom,appsbl-qseecom-support;
+		qcom,commonlib64-loaded-by-uefi;
+		qcom,qsee-reentrancy-support = <2>;
+	};
+
+	qcom_rng: qrng@793000 {
+		compatible = "qcom,msm-rng";
+		reg = <0x793000 0x1000>;
+		qcom,no-qrng-config;
+		interconnect-names = "data_path";
+		interconnects = <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_PRNG>;
+		clock-names = "km_clk_src";
+		clocks = <&gcc GCC_PRNG_AHB_CLK>;
+	};
+
+	qcom_smcinvoke: smcinvoke@87900000 {
+		compatible = "qcom,smcinvoke";
+		reg = <0x87900000 0x2200000>;
+		reg-names = "secapp-region";
+	};
+
+	qcom_tzlog: tz-log@146bf720 {
+		compatible = "qcom,tz-log";
+		reg = <0x146bf720 0x3000>;
+		qcom,hyplog-enabled;
+		hyplog-address-offset = <0x410>;
+		hyplog-size-offset = <0x414>;
+	};
+
 };
 
 &firmware {