Merge branch 'x86/hyperv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Topic branch for stable KVM clockource under Hyper-V.

Thanks to Christoffer Dall for resolving the ARM conflict.
This commit is contained in:
Radim Krčmář 2018-02-01 15:04:17 +01:00
commit 7bf14c28ee
2721 changed files with 89942 additions and 46713 deletions

View file

@ -557,7 +557,6 @@ config QCOM_QDF2400_ERRATUM_0065
If unsure, say Y.
config SOCIONEXT_SYNQUACER_PREITS
bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
default y
@ -576,6 +575,17 @@ config HISILICON_ERRATUM_161600802
a 128kB offset to be applied to the target address in this commands.
If unsure, say Y.
config QCOM_FALKOR_ERRATUM_E1041
bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
default y
help
Falkor CPU may speculatively fetch instructions from an improper
memory location when MMU translation is changed from SCTLR_ELn[M]=1
to SCTLR_ELn[M]=0. Prefix an ISB instruction to fix the problem.
If unsure, say Y.
endmenu

View file

@ -75,6 +75,7 @@
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};

View file

@ -77,6 +77,7 @@
pinctrl-0 = <&rmii_pins>;
phy-mode = "rmii";
phy-handle = <&ext_rmii_phy1>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};

View file

@ -82,6 +82,7 @@
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
};
@ -95,7 +96,7 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_vcc1v8>;
bus-width = <8>;
non-removable;

View file

@ -45,19 +45,10 @@
#include "sun50i-a64.dtsi"
/ {
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
non-removable;
disable-wp;
bus-width = <4>;

View file

@ -71,7 +71,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};

View file

@ -66,6 +66,7 @@
<&cpu1>,
<&cpu2>,
<&cpu3>;
interrupt-parent = <&intc>;
};
psci {

View file

@ -63,8 +63,10 @@
cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk";
clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>,
<&cpm_clk 1 5>, <&cpm_clk 1 18>;
clock-names = "pp_clk", "gop_clk",
"mg_clk","axi_clk";
marvell,system-controller = <&cpm_syscon0>;
status = "disabled";
dma-coherent;
@ -155,7 +157,8 @@
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>;
clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>,
<&cpm_clk 1 6>, <&cpm_clk 1 18>;
status = "disabled";
};
@ -338,8 +341,8 @@
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core";
clocks = <&cpm_clk 1 4>;
clock-names = "core","axi";
clocks = <&cpm_clk 1 4>, <&cpm_clk 1 18>;
dma-coherent;
status = "disabled";
};

View file

@ -63,8 +63,10 @@
cps_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk";
clocks = <&cps_clk 1 3>, <&cps_clk 1 9>,
<&cps_clk 1 5>, <&cps_clk 1 18>;
clock-names = "pp_clk", "gop_clk",
"mg_clk", "axi_clk";
marvell,system-controller = <&cps_syscon0>;
status = "disabled";
dma-coherent;
@ -155,7 +157,8 @@
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x12a200 0x10>;
clocks = <&cps_clk 1 9>, <&cps_clk 1 5>;
clocks = <&cps_clk 1 9>, <&cps_clk 1 5>,
<&cps_clk 1 6>, <&cps_clk 1 18>;
status = "disabled";
};

View file

@ -255,7 +255,6 @@
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";

View file

@ -145,7 +145,6 @@
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";

View file

@ -132,6 +132,8 @@
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
clock_in_out = "input";
/* shows instability at 1GBit right now */
max-speed = <100>;
phy-supply = <&vcc_io>;
phy-mode = "rgmii";
pinctrl-names = "default";

View file

@ -514,7 +514,7 @@
tsadc: tsadc@ff250000 {
compatible = "rockchip,rk3328-tsadc";
reg = <0x0 0xff250000 0x0 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&cru SCLK_TSADC>;
assigned-clock-rates = <50000>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;

View file

@ -155,17 +155,6 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 0>;
regulator-name = "vdd_log";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
status = "okay";
};
};
&cpu_b0 {

View file

@ -198,8 +198,8 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>,
<&pinctrl 96 0 0>,
<&pinctrl 160 0 0>;
<&pinctrl 104 0 0>,
<&pinctrl 168 0 0>;
gpio-ranges-group-names = "gpio_range0",
"gpio_range1",
"gpio_range2";

View file

@ -161,7 +161,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_PXA3xx=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m

View file

@ -533,4 +533,14 @@ alternative_else_nop_endif
#endif
.endm
/**
* Errata workaround prior to disable MMU. Insert an ISB immediately prior
* to executing the MSR that will change SCTLR_ELn[M] from a value of 1 to 0.
*/
.macro pre_disable_mmu_workaround
#ifdef CONFIG_QCOM_FALKOR_ERRATUM_E1041
isb
#endif
.endm
#endif /* __ASM_ASSEMBLER_H */

View file

@ -60,6 +60,9 @@ enum ftr_type {
#define FTR_VISIBLE true /* Feature visible to the user space */
#define FTR_HIDDEN false /* Feature is hidden from the user */
#define FTR_VISIBLE_IF_IS_ENABLED(config) \
(IS_ENABLED(config) ? FTR_VISIBLE : FTR_HIDDEN)
struct arm64_ftr_bits {
bool sign; /* Value is signed ? */
bool visible;

View file

@ -91,6 +91,7 @@
#define BRCM_CPU_PART_VULCAN 0x516
#define QCOM_CPU_PART_FALKOR_V1 0x800
#define QCOM_CPU_PART_FALKOR 0xC00
#define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
#define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
@ -99,6 +100,7 @@
#define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
#define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
#define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
#define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
#ifndef __ASSEMBLY__

View file

@ -42,6 +42,8 @@
#include <asm/cmpxchg.h>
#include <asm/fixmap.h>
#include <linux/mmdebug.h>
#include <linux/mm_types.h>
#include <linux/sched.h>
extern void __pte_error(const char *file, int line, unsigned long val);
extern void __pmd_error(const char *file, int line, unsigned long val);
@ -149,12 +151,20 @@ static inline pte_t pte_mkwrite(pte_t pte)
static inline pte_t pte_mkclean(pte_t pte)
{
return clear_pte_bit(pte, __pgprot(PTE_DIRTY));
pte = clear_pte_bit(pte, __pgprot(PTE_DIRTY));
pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
return pte;
}
static inline pte_t pte_mkdirty(pte_t pte)
{
return set_pte_bit(pte, __pgprot(PTE_DIRTY));
pte = set_pte_bit(pte, __pgprot(PTE_DIRTY));
if (pte_write(pte))
pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY));
return pte;
}
static inline pte_t pte_mkold(pte_t pte)
@ -207,9 +217,6 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
}
}
struct mm_struct;
struct vm_area_struct;
extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
/*
@ -238,7 +245,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
* hardware updates of the pte (ptep_set_access_flags safely changes
* valid ptes without going through an invalid entry).
*/
if (pte_valid(*ptep) && pte_valid(pte)) {
if (IS_ENABLED(CONFIG_DEBUG_VM) && pte_valid(*ptep) && pte_valid(pte) &&
(mm == current->active_mm || atomic_read(&mm->mm_users) > 1)) {
VM_WARN_ONCE(!pte_young(pte),
"%s: racy access flag clearing: 0x%016llx -> 0x%016llx",
__func__, pte_val(*ptep), pte_val(pte));
@ -641,28 +649,23 @@ static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
/*
* ptep_set_wrprotect - mark read-only while preserving the hardware update of
* the Access Flag.
* ptep_set_wrprotect - mark read-only while trasferring potential hardware
* dirty status (PTE_DBM && !PTE_RDONLY) to the software PTE_DIRTY bit.
*/
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long address, pte_t *ptep)
{
pte_t old_pte, pte;
/*
* ptep_set_wrprotect() is only called on CoW mappings which are
* private (!VM_SHARED) with the pte either read-only (!PTE_WRITE &&
* PTE_RDONLY) or writable and software-dirty (PTE_WRITE &&
* !PTE_RDONLY && PTE_DIRTY); see is_cow_mapping() and
* protection_map[]. There is no race with the hardware update of the
* dirty state: clearing of PTE_RDONLY when PTE_WRITE (a.k.a. PTE_DBM)
* is set.
*/
VM_WARN_ONCE(pte_write(*ptep) && !pte_dirty(*ptep),
"%s: potential race with hardware DBM", __func__);
pte = READ_ONCE(*ptep);
do {
old_pte = pte;
/*
* If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
* clear), set the PTE_DIRTY bit.
*/
if (pte_hw_dirty(pte))
pte = pte_mkdirty(pte);
pte = pte_wrprotect(pte);
pte_val(pte) = cmpxchg_relaxed(&pte_val(*ptep),
pte_val(old_pte), pte_val(pte));

View file

@ -51,8 +51,6 @@ struct thread_info {
.addr_limit = KERNEL_DS, \
}
#define init_stack (init_thread_union.stack)
#define thread_saved_pc(tsk) \
((unsigned long)(tsk->thread.cpu_context.pc))
#define thread_saved_sp(tsk) \

View file

@ -37,6 +37,7 @@ ENTRY(__cpu_soft_restart)
mrs x12, sctlr_el1
ldr x13, =SCTLR_ELx_FLAGS
bic x12, x12, x13
pre_disable_mmu_workaround
msr sctlr_el1, x12
isb

View file

@ -145,7 +145,8 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
};
static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_SVE_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),

View file

@ -96,6 +96,7 @@ ENTRY(entry)
mrs x0, sctlr_el2
bic x0, x0, #1 << 0 // clear SCTLR.M
bic x0, x0, #1 << 2 // clear SCTLR.C
pre_disable_mmu_workaround
msr sctlr_el2, x0
isb
b 2f
@ -103,6 +104,7 @@ ENTRY(entry)
mrs x0, sctlr_el1
bic x0, x0, #1 << 0 // clear SCTLR.M
bic x0, x0, #1 << 2 // clear SCTLR.C
pre_disable_mmu_workaround
msr sctlr_el1, x0
isb
2:

View file

@ -48,7 +48,9 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
return pgprot_val(PAGE_KERNEL_ROX);
/* RW- */
if (attr & EFI_MEMORY_XP || type != EFI_RUNTIME_SERVICES_CODE)
if (((attr & (EFI_MEMORY_RP | EFI_MEMORY_WP | EFI_MEMORY_XP)) ==
EFI_MEMORY_XP) ||
type != EFI_RUNTIME_SERVICES_CODE)
return pgprot_val(PAGE_KERNEL);
/* RWX */

View file

@ -1043,7 +1043,7 @@ void fpsimd_update_current_state(struct fpsimd_state *state)
local_bh_disable();
current->thread.fpsimd_state = *state;
current->thread.fpsimd_state.user_fpsimd = state->user_fpsimd;
if (system_supports_sve() && test_thread_flag(TIF_SVE))
fpsimd_to_sve(current);

View file

@ -750,6 +750,7 @@ __primary_switch:
* to take into account by discarding the current kernel mapping and
* creating a new one.
*/
pre_disable_mmu_workaround
msr sctlr_el1, x20 // disable the MMU
isb
bl __create_page_tables // recreate kernel mapping

View file

@ -28,6 +28,7 @@
#include <linux/perf_event.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/uaccess.h>
#include <asm/compat.h>
#include <asm/current.h>
@ -36,7 +37,6 @@
#include <asm/traps.h>
#include <asm/cputype.h>
#include <asm/system_misc.h>
#include <asm/uaccess.h>
/* Breakpoint currently in use for each BRP. */
static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);

View file

@ -45,6 +45,7 @@ ENTRY(arm64_relocate_new_kernel)
mrs x0, sctlr_el2
ldr x1, =SCTLR_ELx_FLAGS
bic x0, x0, x1
pre_disable_mmu_workaround
msr sctlr_el2, x0
isb
1:

View file

@ -45,7 +45,7 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
ret = kvm_psci_call(vcpu);
if (ret < 0) {
kvm_inject_undefined(vcpu);
vcpu_set_reg(vcpu, 0, ~0UL);
return 1;
}
@ -54,7 +54,7 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
kvm_inject_undefined(vcpu);
vcpu_set_reg(vcpu, 0, ~0UL);
return 1;
}

View file

@ -151,6 +151,7 @@ reset:
mrs x5, sctlr_el2
ldr x6, =SCTLR_ELx_FLAGS
bic x5, x5, x6 // Clear SCTL_M and etc
pre_disable_mmu_workaround
msr sctlr_el2, x5
isb

View file

@ -75,6 +75,9 @@ static void __hyp_text __debug_save_spe_nvhe(u64 *pmscr_el1)
{
u64 reg;
/* Clear pmscr in case of early return */
*pmscr_el1 = 0;
/* SPE present on this CPU? */
if (!cpuid_feature_extract_unsigned_field(read_sysreg(id_aa64dfr0_el1),
ID_AA64DFR0_PMSVER_SHIFT))

View file

@ -389,7 +389,7 @@ void ptdump_check_wx(void)
.check_wx = true,
};
walk_pgd(&st, &init_mm, 0);
walk_pgd(&st, &init_mm, VA_START);
note_page(&st, 0, 0, 0);
if (st.wx_pages || st.uxn_pages)
pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",

View file

@ -574,7 +574,6 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
{
struct siginfo info;
const struct fault_info *inf;
int ret = 0;
inf = esr_to_fault_info(esr);
pr_err("Synchronous External Abort: %s (0x%08x) at 0x%016lx\n",
@ -589,7 +588,7 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
if (interrupts_enabled(regs))
nmi_enter();
ret = ghes_notify_sea();
ghes_notify_sea();
if (interrupts_enabled(regs))
nmi_exit();
@ -604,7 +603,7 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
info.si_addr = (void __user *)addr;
arm64_notify_die("", regs, &info, esr);
return ret;
return 0;
}
static const struct fault_info fault_info[] = {

View file

@ -476,6 +476,8 @@ void __init arm64_memblock_init(void)
reserve_elfcorehdr();
high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
dma_contiguous_reserve(arm64_dma_phys_limit);
memblock_allow_resize();
@ -502,7 +504,6 @@ void __init bootmem_init(void)
sparse_init();
zone_sizes_init(min, max);
high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
memblock_dump_all();
}

View file

@ -148,7 +148,8 @@ static inline int epilogue_offset(const struct jit_ctx *ctx)
/* Stack must be multiples of 16B */
#define STACK_ALIGN(sz) (((sz) + 15) & ~15)
#define PROLOGUE_OFFSET 8
/* Tail call offset to jump into */
#define PROLOGUE_OFFSET 7
static int build_prologue(struct jit_ctx *ctx)
{
@ -200,19 +201,19 @@ static int build_prologue(struct jit_ctx *ctx)
/* Initialize tail_call_cnt */
emit(A64_MOVZ(1, tcc, 0, 0), ctx);
/* 4 byte extra for skb_copy_bits buffer */
ctx->stack_size = prog->aux->stack_depth + 4;
ctx->stack_size = STACK_ALIGN(ctx->stack_size);
/* Set up function call stack */
emit(A64_SUB_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
cur_offset = ctx->idx - idx0;
if (cur_offset != PROLOGUE_OFFSET) {
pr_err_once("PROLOGUE_OFFSET = %d, expected %d!\n",
cur_offset, PROLOGUE_OFFSET);
return -1;
}
/* 4 byte extra for skb_copy_bits buffer */
ctx->stack_size = prog->aux->stack_depth + 4;
ctx->stack_size = STACK_ALIGN(ctx->stack_size);
/* Set up function call stack */
emit(A64_SUB_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
return 0;
}
@ -260,11 +261,12 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
emit(A64_LDR64(prg, tmp, prg), ctx);
emit(A64_CBZ(1, prg, jmp_offset), ctx);
/* goto *(prog->bpf_func + prologue_size); */
/* goto *(prog->bpf_func + prologue_offset); */
off = offsetof(struct bpf_prog, bpf_func);
emit_a64_mov_i64(tmp, off, ctx);
emit(A64_LDR64(tmp, prg, tmp), ctx);
emit(A64_ADD_I(1, tmp, tmp, sizeof(u32) * PROLOGUE_OFFSET), ctx);
emit(A64_ADD_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
emit(A64_BR(tmp), ctx);
/* out: */