From 805825a57b6294cdc28d98487ac96280351f44e1 Mon Sep 17 00:00:00 2001
From: liaohj <liaohj@lenovo.com>
Date: Fri, 9 Jun 2023 17:36:02 +0800
Subject: [PATCH] dts:fogor:set audio dts

fogo use wcd9370+fs1815
4375 platform.
set related dts.

Change-Id: I194d07b92136f7ceb54a9f9a9d0fd40c1e391bd6
Signed-off-by: liaohj <liaohj@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2639583
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
---
 qcom/fogor-sensors.dtsi            | 40 +-------------------
 qcom/holi-audio-fogor-overlay.dtsi | 61 +++++++++++++++++++++---------
 2 files changed, 45 insertions(+), 56 deletions(-)

diff --git a/qcom/fogor-sensors.dtsi b/qcom/fogor-sensors.dtsi
index a0df4cb77529..e65a4fbcabe0 100755
--- a/qcom/fogor-sensors.dtsi
+++ b/qcom/fogor-sensors.dtsi
@@ -37,31 +37,6 @@
 				bias-no-pull;
 			};
 	};
-	sar_int_fogor_default: sar_int_fogor_default {
-			mux {
-				pins = "gpio58";
-				function =  "gpio";
-			};
-			config {
-				pins = "gpio58";
-				num-grp-pins = <1>;
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-	};
-
-	sar_int_fogor_sleep: sar_int_fogor_sleep {
-			mux {
-				pins = "gpio58";
-				function =  "gpio";
-			};
-			config {
-				pins = "gpio58";
-				num-grp-pins = <1>;
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-	};
 };
 
 &soc {
@@ -75,19 +50,12 @@
 };
 
 &qupv3_se8_i2c {
-	status = "okay";
+	status = "disabled";
 	Semtech_sx937x@2c {
 			compatible = "Semtech,sx937x";
 			reg = <0x2c>;
 			Semtech,power-supply-type = <1>;
 			cap_vdd-supply = <&L12A>;
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&sar_int_fogor_default>;
-			pinctrl-1 = <&sar_int_fogor_sleep>;
-			interrupt-parent = <&tlmm>;
-			interrupts = <58 0x02>;
-			interrupt-names = "sx937x_irq";
-			Semtech,nirq-gpio = <&tlmm 58 0x02>;
 			/*use PH5/6 as the reference sensor
 			set it to 0xff if the ref-phases-x is not used*/
 			Semtech,ref-phases-a = <5>;
@@ -171,10 +139,6 @@
 		reg = < 0x12 >;
 		//aw_sar,regulator-power-supply = <1>;
 		sar-num = < 0 >;
-		interrupt-parent = < &tlmm >;
-		interrupts = <58 0x02>;
-		interrupt-names = "awinic_irq";
-		irq-gpio = <&tlmm 58 0x02>;
 		//vcc0-supply = <&L12A>;
 		channel_use_flag = <0x1f>;
 		aw_sar,use_plug_cail;
@@ -182,7 +146,7 @@
 		/* private node belongs to aw963xx */
 		start-mode = < 1 >; // 0: start in rom  1: start in ram
 		irq-mux = < 2 >; // set csx as irq pin. config this field when connect to aw96308/aw96310
-		status = "okay";
+		status = "disabled";
 	};
 };
 
diff --git a/qcom/holi-audio-fogor-overlay.dtsi b/qcom/holi-audio-fogor-overlay.dtsi
index 27d3c21b2659..238c57cff51b 100644
--- a/qcom/holi-audio-fogor-overlay.dtsi
+++ b/qcom/holi-audio-fogor-overlay.dtsi
@@ -4,6 +4,33 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
 
+&tlmm{
+	fsm_rcv_rst: fsm_rcv_rst {
+		mux {
+			pins = "gpio86";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio86";
+			drive-strength = <2>; /* 2 MA */
+			bias-pull-down;
+			output-low;
+		};
+	};
+	fsm_spk_rst: fsm_spk_rst {
+		mux {
+			pins = "gpio58";
+			function = "gpio";
+		};
+		config {
+			pins = "gpio58";
+			drive-strength = <2>; /* 2 MA */
+			bias-pull-down;
+			output-low;
+		};
+	};
+};
+
 &cdc_dmic01_gpios {
 	status = "disabled";
 };
@@ -220,7 +247,7 @@
 };
 
 &holi_snd {
-	qcom,model = "holi-9370_aw87xxx-snd-card";
+	qcom,model = "holi-9370_fs1815-snd-card";
 	qcom,wcn-btfm = <1>;
 	qcom,tdm-max-slots = <4>;
 	qcom,mi2s-audio-intf = <0>;
@@ -276,25 +303,23 @@
 	qcom,msm-mbhc-hs-mic-min-threshold-mv = <116>;
 };
 
-&qupv3_se8_i2c {
+&qupv3_se10_i2c {
         status = "ok";
-        aw887xx_smartpa_0: aw87xxx_pa@58 {
-                compatible = "awinic,aw87xxx_pa";
-                reg = <0x58>;
-                dev_index = < 0 >;
-                esd-enable = "true";
-                aw-rx-topo-id = <0x1000ff00>;
-                aw-rx-port-id = <0xB030>;
-                status = "okay";
+        fs1815_rcv: fs1815_rcv@34{
+            compatible = "foursemi,fs1815";
+            reg = <0x34>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&fsm_rcv_rst>;
+            fsm,rst-gpio = <&tlmm 86 0x00>;
+            status = "okay";
         };
-        aw887xx_smartpa_1: aw87xxx_pa@59 {
-                compatible = "awinic,aw87xxx_pa";
-                reg = <0x59>;
-                dev_index = < 1 >;
-                esd-enable = "true";
-                aw-rx-topo-id = <0x1000ff00>;
-                aw-rx-port-id = <0xB030>;
-                status = "okay";
+        fs1815_spk: fs1815_spk@35{
+            compatible = "foursemi,fs1815";
+            reg = <0x35>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&fsm_spk_rst>;
+            fsm,rst-gpio = <&tlmm 58 0x00>;
+            status = "okay";
         };
 };