From 81a80129c8cd5954b92b998aec927a29823d8dd9 Mon Sep 17 00:00:00 2001
From: wengjun1 <wengjun1@motorola.com>
Date: Mon, 17 May 2021 18:00:55 +0800
Subject: [PATCH] dts: Cyprus: touch: ili7807s bringup

- Support ili7807s driver for cyprus.
- Add  the definition of reset/int pin.

Change-Id: Ic7e88b884d68af922bb686025d80d4694dfd37f1
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1950648
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
---
 qcom/cypfg-touchscreen.dtsi         | 105 ++++++++++++++++++++++++++++
 qcom/holi-cypfg-common-overlay.dtsi |   2 +-
 2 files changed, 106 insertions(+), 1 deletion(-)
 create mode 100755 qcom/cypfg-touchscreen.dtsi

diff --git a/qcom/cypfg-touchscreen.dtsi b/qcom/cypfg-touchscreen.dtsi
new file mode 100755
index 000000000000..011d364973d2
--- /dev/null
+++ b/qcom/cypfg-touchscreen.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&tlmm {
+	touch_int_mux {
+		touch_int_active: active {
+			mux {
+				pins = "gpio22";
+				function = "gpio";
+			};
+			config {
+				pins = "gpio22";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		touch_int_suspend: default {
+			mux {
+				pins = "gpio22";
+				function = "gpio";
+			};
+			config {
+				pins = "gpio22";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	touch_reset_mux {
+		touch_reset_active: active {
+			mux {
+				pins = "gpio21";
+				function = "gpio";
+			};
+			config {
+				pins = "gpio21";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		touch_reset_suspend: default {
+			mux {
+				pins = "gpio21";
+				function = "gpio";
+			};
+			config {
+				pins = "gpio21";
+				drive-strength = <2>;
+				bias-pull-down;
+				output-low;
+			};
+		};
+	};
+
+	ts_release_mux {
+		ts_release: ts_release {
+			mux {
+				pins = "gpio21", "gpio22";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio21", "gpio22";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+};
+
+&qupv3_se0_i2c {
+	status = "disabled";
+};
+
+&qupv3_se0_spi {
+	status = "ok";
+    ilitek@0 {
+		compatible = "tchip,ilitek";
+		reg = <0x0>;
+		spi-max-frequency = <6000000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+		panel = <&dsi_tm_ili7807s_678_fhd_video>;
+		touch,reset-gpio = <&tlmm 21 0x00>;
+		touch,irq-gpio = <&tlmm 22 0x2008>;
+		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend", "pmx_ts_release";
+		pinctrl-0 = <&ts_active>;
+		pinctrl-1 = <&touch_int_suspend &touch_reset_suspend>;
+		pinctrl-2 = <&pmx_ts_release>;
+		status = "ok";
+    };
+};
diff --git a/qcom/holi-cypfg-common-overlay.dtsi b/qcom/holi-cypfg-common-overlay.dtsi
index a747775eb250..6382352d4447 100644
--- a/qcom/holi-cypfg-common-overlay.dtsi
+++ b/qcom/holi-cypfg-common-overlay.dtsi
@@ -12,7 +12,7 @@
 
 #include "holi-moto-common-overlay.dtsi"
 #include "cypfg-display.dtsi"
-//#include "denver-touchscreen.dtsi"
+#include "cypfg-touchscreen.dtsi"
 #include "denver-sensors.dtsi"
 #include "camera/holi-camera-sensor-mot-denver-overlay.dtsi"
 #include "holi-audio-wcd9370-aw882xx-overlay.dtsi"