ARM: dts: msm: Add 120Hz Video mode support on yupik

Add 120Hz nt36672e Video mode panel support on yupik
idp platform. Also, enable DFPS and ESD feature for
the panel.

Change-Id: Ic8e0bf998c3ebf83fba917389754326b39bbac96
This commit is contained in:
Ritesh Kumar 2021-02-02 18:09:12 +05:30
commit 86798cd792
3 changed files with 33 additions and 0 deletions

View file

@ -1,4 +1,5 @@
#include "dsi-panel-nt36672e-fhd-plus-144-video.dtsi"
#include "dsi-panel-nt36672e-fhd-plus-120-video.dtsi"
#include "dsi-panel-nt36672e-fhd-plus-60hz-video.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-60hz-cmd-cphy.dtsi"
#include "dsi-panel-r66451-dsc-fhd-plus-90hz-cmd-cphy.dtsi"
@ -139,6 +140,21 @@
};
};
&dsi_nt36672e_fhd_plus_120_video {
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,dsi-supported-dfps-list = <120 60 48>;
qcom,mdss-dsi-pan-enable-dynamic-fps;
qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";
qcom,mdss-dsi-display-timings {
timing@0 {
qcom,mdss-dsi-panel-phy-timings = [00 1e 08 08 24 22 08
08 08 02 04 00 1b 18];
qcom,display-topology = <1 1 1>;
qcom,default-topology-index = <0>;
};
};
};
&dsi_nt36672e_fhd_plus_60_video {
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,mdss-dsi-display-timings {

View file

@ -8,6 +8,14 @@
qcom,platform-reset-gpio = <&tlmm 44 0>;
};
&dsi_nt36672e_fhd_plus_120_video {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,platform-reset-gpio = <&tlmm 44 0>;
};
&dsi_nt36672e_fhd_plus_60_video {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

View file

@ -59,6 +59,15 @@
qcom,mdss-dsi-panel-status-read-length = <1>;
};
&dsi_nt36672e_fhd_plus_120_video {
qcom,esd-check-enabled;
qcom,mdss-dsi-panel-status-check-mode = "reg_read";
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
qcom,mdss-dsi-panel-status-value = <0x9c>;
qcom,mdss-dsi-panel-status-read-length = <1>;
};
&dsi_r66451_amoled_60hz_cmd_cphy {
qcom,esd-check-enabled;
qcom,mdss-dsi-panel-status-check-mode = "reg_read";