diff --git a/bindings/cnss/icnss.txt b/bindings/cnss/icnss.txt
new file mode 100644
index 000000000000..982505db6003
--- /dev/null
+++ b/bindings/cnss/icnss.txt
@@ -0,0 +1,78 @@
+* Qualcomm Technologies Inc Q6 Integrated connectivity Platform Driver
+
+This platform driver adds support for the Integrated WLAN that runs
+on Q6 based platforms. WLAN FW on these architecture runs on Q6. This
+platform driver communicates with WLAN FW over QMI, WLAN on/off messages
+to FW are communicated thru this interface. This driver also listens to
+WLAN PD restart notifications.
+
+Required properties:
+  - compatible: "qcom,icnss" for ADRASTEA architecture
+                "qcom,wcn6750" for iWCN architecture
+  - reg: Memory regions defined as starting address and size
+  - reg-names: Names of the memory regions defined in reg entry
+  - interrupts: Copy engine interrupt table
+  - qcom,wlan-msa-memory: MSA memory size
+  - clocks: List of clock phandles
+  - clock-names: List of clock names corresponding to the "clocks" property
+  - iommus: SMMUs and corresponding Stream IDs needed by WLAN
+  - qcom,wlan-smmu-iova-address: I/O virtual address range as <start length>
+    format to be used for allocations associated between WLAN and SMMU
+
+Optional properties:
+  - <supply-name>-supply: phandle to the regulator device tree node
+			   optional "supply-name" is "vdd-0.8-cx-mx".
+  - qcom,<supply>-config: Specifies voltage levels for supply. Should be
+			   specified in pairs (min, max), units uV.  There can
+			   be optional load in uA and Regulator settle delay in
+			   uS.
+  - qcom,icnss-vadc: VADC handle for vph_pwr read APIs.
+  - qcom,icnss-adc_tm: VADC handle for vph_pwr notification APIs.
+  - io-channels: IIO channel to monitor for vph_pwr power.
+  - io-channel-names: IIO channel name as per the client name.
+  - qcom,smmu-s1-bypass: Boolean context flag to set SMMU to S1 bypass
+  - qcom,wlan-msa-fixed-region: phandle, specifier pairs to children of /reserved-memory
+  - qcom,hyp_disabled: Boolean context flag to disable hyperviser
+
+WLAN SMP2P sub nodes
+
+  - qcom,smp2p_map_wlan_1_in - represents the in smp2p to
+				  wlan driver from modem.
+
+Example:
+
+    qcom,icnss@0a000000 {
+        compatible = "qcom,icnss";
+        reg = <0x0a000000 0x1000000>;
+        reg-names = "membase";
+        clocks = <&clock_gcc clk_aggre2_noc_clk>;
+        clock-names = "smmu_aggre2_noc_clk";
+        iommus = <&anoc2_smmu 0x1900>,
+                 <&anoc2_smmu 0x1901>;
+        qcom,wlan-smmu-iova-address = <0 0x10000000>;
+        interrupts =
+		   <0 130 0 /* CE0 */ >,
+		   <0 131 0 /* CE1 */ >,
+		   <0 132 0 /* CE2 */ >,
+		   <0 133 0 /* CE3 */ >,
+		   <0 134 0 /* CE4 */ >,
+		   <0 135 0 /* CE5 */ >,
+		   <0 136 0 /* CE6 */ >,
+		   <0 137 0 /* CE7 */ >,
+		   <0 138 0 /* CE8 */ >,
+		   <0 139 0 /* CE9 */ >,
+		   <0 140 0 /* CE10 */ >,
+		   <0 141 0 /* CE11 */ >;
+        qcom,wlan-msa-memory = <0x200000>;
+	qcom,wlan-msa-fixed-region = <&wlan_msa_mem>;
+	qcom,smmu-s1-bypass;
+	vdd-0.8-cx-mx-supply = <&pm8998_l5>;
+	qcom,vdd-0.8-cx-mx-config = <800000 800000 2400 1000>;
+	qcom,hyp_disabled;
+	qcom,smp2p_map_wlan_1_in {
+		interrupts-extended = <&smp2p_wlan_1_in 0 0>,
+			<&smp2p_wlan_1_in 1 0>;
+		interrupt-names = "qcom,smp2p-force-fatal-error",
+			"qcom,smp2p-early-crash-ind";
+	};
+    };