diff --git a/fw/htt.h b/fw/htt.h
index 045efe9dd2a8..3aeba5a65602 100644
--- a/fw/htt.h
+++ b/fw/htt.h
@@ -255,9 +255,10 @@
  * 3.127 Add transmit_count fields in htt_tx_wbm_completion_vX structs.
  * 3.128 Add H2T TX_LATENCY_STATS_CFG + T2H TX_LATENCY_STATS_PERIODIC_IND
  *       msg defs
+ * 3.129 Add HTT_TX_FW2WBM_REINJECT_REASON_SAWF_SVC_CLASS_ID_ABSENT def.
  */
 #define HTT_CURRENT_VERSION_MAJOR 3
-#define HTT_CURRENT_VERSION_MINOR 128
+#define HTT_CURRENT_VERSION_MINOR 129
 
 #define HTT_NUM_TX_FRAG_DESC  1024
 
@@ -813,6 +814,7 @@ typedef enum {
     HTT_STATS_CODEL_MSDUQ_TAG                      = 189, /* htt_codel_msduq_stats_tlv */
     HTT_STATS_MLO_SCHED_STATS_TAG                  = 190, /* htt_mlo_sched_stats_tlv */
     HTT_STATS_PDEV_MLO_IPC_STATS_TAG               = 191, /* htt_pdev_mlo_ipc_stats_tlv */
+    HTT_STATS_WHAL_WSI_TAG                         = 192, /* htt_stats_whal_wsi_tlv */
 
 
     HTT_STATS_MAX_TAG,
@@ -2767,6 +2769,7 @@ typedef enum {
    HTT_TX_FW2WBM_REINJECT_REASON_DHCP,
    HTT_TX_FW2WBM_REINJECT_REASON_FLOW_CONTROL,
    HTT_TX_FW2WBM_REINJECT_REASON_MLO_MCAST,
+   HTT_TX_FW2WBM_REINJECT_REASON_SAWF_SVC_CLASS_ID_ABSENT,
 
    HTT_TX_FW2WBM_REINJECT_REASON_MAX,
 } htt_tx_fw2wbm_reinject_reason_t;
@@ -3224,14 +3227,73 @@ PREPACK struct htt_tx_wbm_transmit_status {
  *  used only if tx_status is HTT_TX_FW2WBM_TX_STATUS_REINJECT.
  */
 PREPACK struct htt_tx_wbm_reinject_status {
+    A_UINT32
+        sw_peer_id  : 16,
+        data_length : 16;
+    A_UINT32
+        tid         : 5,
+        msduq_idx   : 4,
+        reserved1   : 23;
    A_UINT32
-       reserved0:       32;
-   A_UINT32
-       reserved1:       32;
-   A_UINT32
-       reserved2:       32;
+       reserved2: 32;
 } POSTPACK;
 
+#define HTT_TX_WBM_REINJECT_SW_PEER_ID_M    0x0000ffff
+#define HTT_TX_WBM_REINJECT_SW_PEER_ID_S    0
+#define HTT_TX_WBM_REINJECT_DATA_LEN_M      0xffff0000
+#define HTT_TX_WBM_REINJECT_DATA_LEN_S      16
+
+#define HTT_TX_WBM_REINJECT_TID_M           0x0000001f
+#define HTT_TX_WBM_REINJECT_TID_S           0
+#define HTT_TX_WBM_REINJECT_MSDUQ_ID_M      0x000001e0
+#define HTT_TX_WBM_REINJECT_MSDUQ_ID_S      5
+
+#define HTT_TX_WBM_REINJECT_SW_PEER_ID_GET(_var)\
+    (((_var) & HTT_TX_WBM_REINJECT_SW_PEER_ID_M) >>\
+         HTT_TX_WBM_REINJECT_SW_PEER_ID_S)\
+
+#define HTT_TX_WBM_REINJECT_SW_PEER_ID_SET(_var, _val)\
+    do {\
+        HTT_CHECK_SET_VAL(HTT_TX_WBM_REINJECT_SW_PEER_ID, _val); \
+        ((_var) |= ((_val) << HTT_TX_WBM_REINJECT_SW_PEER_ID_S));\
+    } while(0)
+
+#define HTT_TX_WBM_REINJECT_DATA_LEN_GET(_var)\
+    (((_var) & HTT_TX_WBM_REINJECT_DATA_LEN_M) >>\
+         HTT_TX_WBM_REINJECT_DATA_LEN_S)\
+
+#define HTT_TX_WBM_REINJECT_DATA_LEN_SET(_var, _val)\
+    do {\
+        HTT_CHECK_SET_VAL(HTT_TX_WBM_REINJECT_DATA_LEN, _val); \
+        ((_var) |= ((_val) << HTT_TX_WBM_REINJECT_DATA_LEN_S));\
+    } while(0)
+
+#define HTT_TX_WBM_REINJECT_TID_GET(_var)\
+    (((_var) & HTT_TX_WBM_REINJECT_TID_M) >>\
+         HTT_TX_WBM_REINJECT_TID_S)\
+
+#define HTT_TX_WBM_REINJECT_TID_SET(_var, _val)\
+    do {\
+        HTT_CHECK_SET_VAL(HTT_TX_WBM_REINJECT_TID, _val); \
+        ((_var) |= ((_val) << HTT_TX_WBM_REINJECT_TID_S));\
+    } while(0)
+
+#define HTT_TX_WBM_REINJECT_MSDUQ_ID_GET(_var)\
+    (((_var) & HTT_TX_WBM_REINJECT_MSDUQ_ID_M) >>\
+         HTT_TX_WBM_REINJECT_MSDUQ_ID_S)\
+
+#define HTT_TX_WBM_REINJECT_MSDUQ_ID_SET(_var, _val)\
+    do {\
+        HTT_CHECK_SET_VAL(HTT_TX_WBM_REINJECT_MSDUQ_ID, _val); \
+        ((_var) |= ((_val) << HTT_TX_WBM_REINJECT_MSDUQ_ID_S));\
+    } while(0)
+
+
+
+
+
+
+
 /**
  * @brief HTT TX WBM multicast echo check notification from firmware to host
  * @details
diff --git a/fw/htt_stats.h b/fw/htt_stats.h
index bc870a81f8c5..b9e5b370a81a 100644
--- a/fw/htt_stats.h
+++ b/fw/htt_stats.h
@@ -1353,6 +1353,17 @@ typedef struct {
 /* preserve old name alias for new name consistent with the tag name */
 typedef htt_stats_whal_tx_tlv htt_hw_stats_whal_tx_tlv;
 
+typedef struct {
+    htt_tlv_hdr_t tlv_hdr;
+
+    A_UINT32 wsib_event_watchdog_timeout;
+    A_UINT32 wsib_event_slave_tlv_length_error;
+    A_UINT32 wsib_event_slave_parity_error;
+    A_UINT32 wsib_event_slave_direct_message;
+    A_UINT32 wsib_event_slave_backpressure_error;
+    A_UINT32 wsib_event_master_tlv_length_error;
+} htt_stats_whal_wsi_tlv;
+
 typedef struct {
     htt_tlv_hdr_t tlv_hdr;
     /**
@@ -5482,7 +5493,10 @@ typedef htt_stats_tx_pdev_rate_stats_be_ofdma_tlv
 
 typedef struct {
     htt_tlv_hdr_t tlv_hdr;
-    /** Tx PPDU duration histogram **/
+    /** tx_ppdu_dur_hist:
+     * Tx PPDU duration histogram, which holds the tx duration of PPDUs
+     * under histogram bins of interval 250us
+     */
     A_UINT32 tx_ppdu_dur_hist[HTT_PDEV_STATS_PPDU_DUR_HIST_BINS];
     A_UINT32 tx_success_time_us_low;
     A_UINT32 tx_success_time_us_high;
@@ -5490,6 +5504,11 @@ typedef struct {
     A_UINT32 tx_fail_time_us_high;
     A_UINT32 pdev_up_time_us_low;
     A_UINT32 pdev_up_time_us_high;
+    /** tx_ofdma_ppdu_dur_hist:
+     * Tx OFDMA PPDU duration histogram, which holds the tx duration of
+     * OFDMA PPDUs under histogram bins of interval 250us
+     */
+    A_UINT32 tx_ofdma_ppdu_dur_hist[HTT_PDEV_STATS_PPDU_DUR_HIST_BINS];
 } htt_stats_tx_pdev_ppdu_dur_tlv;
 /* preserve old name alias for new name consistent with the tag name */
 typedef htt_stats_tx_pdev_ppdu_dur_tlv htt_tx_pdev_ppdu_dur_stats_tlv;
@@ -8179,6 +8198,41 @@ typedef struct {
     A_UINT32 fw_run_time;
     /** per chain runtime noise floor values in dBm */
     A_INT32 runTime_nf_chain[HTT_STATS_MAX_CHAINS];
+
+    /** DFS SW based progressive stats - start **/
+
+    /* current AP operating bandwidth (refer to WLAN_PHY_MODE) */
+    A_UINT32 current_OBW;
+    /* current AP device bandwidth (refer to WLAN_PHY_MODE) */
+    A_UINT32 current_DBW;
+    /* last_radar_type: last detected radar type
+     * This last_radar_type field contains a value whose meaning is not
+     * exposed to the host; this field is only provided for debug purposes.
+     */
+    A_UINT32 last_radar_type;
+    /* dfs_reg_domain: curent DFS regulatory domain
+     * This dfs_reg_domain field contains a value whose meaning is not
+     * exposed to the host; this field is only provided for debug purposes.
+     */
+    A_UINT32 dfs_reg_domain;
+    /* radar_mask_bit: Radar mask setting programmed in HW registers.
+     * Each bit represents a 20 MHz portion of the channel.
+     * Bit 0 represents the highest 20 MHz portion within the channel.
+     * For example...
+     * For a 80 MHz channel, bit0 = highest 20 MHz, bit3 = lowest 20 MHz
+     * For a 320 MHz channel, bit0 = highest 20 MHz, bit15 = lowest 20 MHz
+     */
+    A_UINT32 radar_mask_bit;
+    /* DFS radar rssi threshold (units = dBm) */
+    A_INT32 radar_rssi;
+    /* DFS global flags (refer to IEEE80211_CHAN_* defines) */
+    A_UINT32 radar_dfs_flags;
+    /* band center frequency of operating bandwidth (units = MHz) */
+    A_UINT32 band_center_frequency_OBW;
+    /* band center frequency of device bandwidth (units = MHz) */
+    A_UINT32 band_center_frequency_DBW;
+
+    /** DFS SW based progressive stats - end **/
 } htt_stats_phy_stats_tlv;
 /* preserve old name alias for new name consistent with the tag name */
 typedef htt_stats_phy_stats_tlv htt_phy_stats_tlv;
@@ -8292,6 +8346,15 @@ typedef struct {
      * values are specified by the HTT_WHAL_CONFIG enum type
      */
     A_UINT32 whal_config_flag;
+    /** nfcal_iteration_counts:
+     * iteration count for Home/Scan/Periodic Noise Floor calibrations
+     * nfcal_iteration_counts[0] - home NF iteration counter
+     * nfcal_iteration_counts[1] - scan NF iteration counter
+     * nfcal_iteration_counts[2] - periodic NF iteration counter
+     * These counters are not reset automatically; they are only reset
+     * when explicitly requested by the host.
+     */
+    A_UINT32 nfcal_iteration_counts[3];
 } htt_stats_phy_reset_stats_tlv;
 /* preserve old name alias for new name consistent with the tag name */
 typedef htt_stats_phy_reset_stats_tlv htt_phy_reset_stats_tlv;
@@ -8984,14 +9047,19 @@ typedef htt_stats_ml_link_info_details_tlv htt_ml_link_info_tlv;
 #define HTT_ML_PEER_DETAILS_LINK_INIT_COUNT_S               19
 #define HTT_ML_PEER_DETAILS_NON_STR_M                       0x00400000
 #define HTT_ML_PEER_DETAILS_NON_STR_S                       22
-#define HTT_ML_PEER_DETAILS_EMLSR_M                         0x00800000
-#define HTT_ML_PEER_DETAILS_EMLSR_S                         23
+#define HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_M               0x00800000
+#define HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_S               23
+  /* for backwards compatibility, retain the old EMLSR name of the bitfield */
+  #define HTT_ML_PEER_DETAILS_EMLSR_M HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_M
+  #define HTT_ML_PEER_DETAILS_EMLSR_S HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_S
 #define HTT_ML_PEER_DETAILS_IS_STA_KO_M                     0x01000000
 #define HTT_ML_PEER_DETAILS_IS_STA_KO_S                     24
 #define HTT_ML_PEER_DETAILS_NUM_LOCAL_LINKS_M               0x06000000
 #define HTT_ML_PEER_DETAILS_NUM_LOCAL_LINKS_S               25
 #define HTT_ML_PEER_DETAILS_ALLOCATED_M                     0x08000000
 #define HTT_ML_PEER_DETAILS_ALLOCATED_S                     27
+#define HTT_ML_PEER_DETAILS_EMLSR_SUPPORT_M                 0x10000000
+#define HTT_ML_PEER_DETAILS_EMLSR_SUPPORT_S                 28
 
 #define HTT_ML_PEER_DETAILS_PARTICIPATING_CHIPS_BITMAP_M    0x000000ff
 #define HTT_ML_PEER_DETAILS_PARTICIPATING_CHIPS_BITMAP_S    0
@@ -9062,17 +9130,32 @@ typedef htt_stats_ml_link_info_details_tlv htt_ml_link_info_tlv;
         ((_var) |= ((_val) << HTT_ML_PEER_DETAILS_NON_STR_S)); \
     } while (0)
 
-#define HTT_ML_PEER_DETAILS_EMLSR_GET(_var) \
-    (((_var) & HTT_ML_PEER_DETAILS_EMLSR_M) >> \
-     HTT_ML_PEER_DETAILS_EMLSR_S)
+#define HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_GET(_var) \
+    (((_var) & HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_M) >> \
+     HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_S)
 
-#define HTT_ML_PEER_DETAILS_EMLSR_SET(_var, _val) \
+#define HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_SET(_var, _val) \
     do { \
-        HTT_CHECK_SET_VAL(HTT_ML_PEER_DETAILS_EMLSR, _val); \
-        ((_var) &= ~(HTT_ML_PEER_DETAILS_EMLSR_M)); \
-        ((_var) |= ((_val) << HTT_ML_PEER_DETAILS_EMLSR_S)); \
+        HTT_CHECK_SET_VAL(HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE, _val); \
+        ((_var) &= ~(HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_M)); \
+        ((_var) |= ((_val) << HTT_ML_PEER_DETAILS_IS_EMLSR_ACTIVE_S)); \
     } while (0)
 
+    /* start deprecated:
+     * For backwards compatibility, retain a macro definition that uses
+     * the old EMLSR name of the bitfield
+     */
+    #define HTT_ML_PEER_DETAILS_EMLSR_GET(_var) \
+        (((_var) & HTT_ML_PEER_DETAILS_EMLSR_M) >> \
+         HTT_ML_PEER_DETAILS_EMLSR_S)
+    #define HTT_ML_PEER_DETAILS_EMLSR_SET(_var, _val) \
+        do { \
+            HTT_CHECK_SET_VAL(HTT_ML_PEER_DETAILS_EMLSR, _val); \
+            ((_var) &= ~(HTT_ML_PEER_DETAILS_EMLSR_M)); \
+            ((_var) |= ((_val) << HTT_ML_PEER_DETAILS_EMLSR_S)); \
+        } while (0)
+    /* end deprecated */
+
 #define HTT_ML_PEER_DETAILS_IS_STA_KO_GET(_var) \
     (((_var) & HTT_ML_PEER_DETAILS_IS_STA_KO_M) >> \
      HTT_ML_PEER_DETAILS_IS_STA_KO_S)
@@ -9106,6 +9189,18 @@ typedef htt_stats_ml_link_info_details_tlv htt_ml_link_info_tlv;
         ((_var) |= ((_val) << HTT_ML_PEER_DETAILS_ALLOCATED_S)); \
     } while (0)
 
+#define HTT_ML_PEER_DETAILS_EMLSR_SUPPORT_GET(_var) \
+    (((_var) & HTT_ML_PEER_DETAILS_EMLSR_SUPPORT_M) >> \
+     HTT_ML_PEER_DETAILS_EMLSR_SUPPORT_S)
+
+#define HTT_ML_PEER_DETAILS_EMLSR_SUPPORT_SET(_var, _val) \
+    do { \
+        HTT_CHECK_SET_VAL(HTT_ML_PEER_DETAILS_EMLSR_SUPPORT, _val); \
+        ((_var) &= ~(HTT_ML_PEER_DETAILS_EMLSR_SUPPORT_M)); \
+        ((_var) |= ((_val) << HTT_ML_PEER_DETAILS_EMLSR_SUPPORT_S)); \
+    } while (0)
+
+
 #define HTT_ML_PEER_DETAILS_PARTICIPATING_CHIPS_BITMAP_GET(_var) \
     (((_var) & HTT_ML_PEER_DETAILS_PARTICIPATING_CHIPS_BITMAP_M) >> \
      HTT_ML_PEER_DETAILS_PARTICIPATING_CHIPS_BITMAP_S)
@@ -9128,11 +9223,21 @@ typedef struct {
                      primary_chip_id   : 2,
                      link_init_count   : 3,
                      non_str           : 1,
-                     emlsr             : 1,
+                     is_emlsr_active   : 1,
                      is_sta_ko         : 1,
                      num_local_links   : 2,
                      allocated         : 1,
-                     reserved          : 4;
+                     emlsr_support     : 1,
+                     reserved          : 3;
+        };
+        struct {
+            /*
+             * For backwards compatibility, use a dummy union element to
+             * retain the old "emlsr" name for the "is_emlsr_active" bitfield.
+             */
+            A_UINT32 dummy1 : 23,
+                     emlsr  : 1,
+                     dummy2 : 8;
         };
         A_UINT32 msg_dword_1;
     };
@@ -9341,6 +9446,8 @@ typedef enum {
     HTT_STATS_SCHED_OFDMA_TXBF_INELIGIBILITY_MAX,
 } htt_stats_sched_ofdma_txbf_ineligibility_t;
 
+#define HTT_MAX_NUM_CHAN_ACC_LAT_INTR 9
+
 typedef struct {
     htt_tlv_hdr_t tlv_hdr;
     /**
@@ -9384,6 +9491,19 @@ typedef struct {
     /** Num of instances where dl ofdma is disabled because there are consecutive mpdu failure */
     A_UINT32 dlofdma_disabled_consec_no_mpdus_success[HTT_NUM_AC_WMM];
     A_UINT32 txbf_ofdma_ineligibility_stat[HTT_STATS_SCHED_OFDMA_TXBF_INELIGIBILITY_MAX];
+    /** Average channel access latency histogram stats
+     *
+     *  avg_chan_acc_lat_hist[0]: channel access latency is < 100 us
+     *  avg_chan_acc_lat_hist[1]: 100 us <= channel access latency < 200 us
+     *  avg_chan_acc_lat_hist[2]: 200 us <= channel access latency < 300 us
+     *  avg_chan_acc_lat_hist[3]: 300 us <= channel access latency < 400 us
+     *  avg_chan_acc_lat_hist[4]: 400 us <= channel access latency < 500 us
+     *  avg_chan_acc_lat_hist[5]: 500 us <= channel access latency < 1000 us
+     *  avg_chan_acc_lat_hist[6]: 1000 us <= channel access latency < 1500 us
+     *  avg_chan_acc_lat_hist[7]: 1500 us <= channel access latency < 2000 us
+     *  avg_chan_acc_lat_hist[8]: channel access latency is >= 2000 us
+    */
+    A_UINT32 avg_chan_acc_lat_hist[HTT_MAX_NUM_CHAN_ACC_LAT_INTR];
 } htt_stats_pdev_sched_algo_ofdma_stats_tlv;
 /* preserve old name alias for new name consistent with the tag name */
 typedef htt_stats_pdev_sched_algo_ofdma_stats_tlv
diff --git a/fw/wmi_services.h b/fw/wmi_services.h
index d904a30ccf84..b0e825a49107 100644
--- a/fw/wmi_services.h
+++ b/fw/wmi_services.h
@@ -645,6 +645,9 @@ typedef  enum  {
     WMI_SERVICE_5GHZ_HI_RSSI_ROAM_SUPPORT = 392, /* Indicate FW supports High RSSI Roam from 5 GHz Band to 6 GHz Band */
     WMI_SERVICE_BOTH_PSD_EIRP_FOR_AP_SP_CLIENT_SP_SUPPORT = 393, /* Support for CTL regeneration where both PSD and EIRP will be sent in 6GHZ SET_TPC WMI for SP and SP_CLIENT power modes */
     WMI_SERVICE_PDEV_PARAM_IN_UTF_WMI = 394, /* FW supports receiving and sending pdev_id parameter in WMI_PDEV_UTF_(CMD/EVENT) */
+    WMI_SERVICE_SW_PROG_DFS_SUPPORT = 395, /* Indicate FW support SW progressive DFS */
+    WMI_SERVICE_MULTIPLE_REORDER_QUEUE_SETUP_SUPPORT = 396, /* Indicate FW supports multiple TID reorder queues setup in one cmd */
+    WMI_SERVICE_MULTIPLE_COEX_CONFIG_SUPPORT = 397, /* FW supports mutiple coex configs in one cmd */
 
     WMI_MAX_EXT2_SERVICE
 
diff --git a/fw/wmi_tlv_defs.h b/fw/wmi_tlv_defs.h
index 96aa4ce897c7..ce93e5939ecf 100644
--- a/fw/wmi_tlv_defs.h
+++ b/fw/wmi_tlv_defs.h
@@ -1412,6 +1412,15 @@ typedef enum {
     WMITLV_TAG_STRUC_wmi_pdev_utf_event_fixed_param,
     WMITLV_TAG_STRUC_wmi_vdev_oob_connection_req_cmd_fixed_param,
     WMITLV_TAG_STRUC_wmi_vdev_oob_connection_resp_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_audio_transport_switch_resp_status_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_audio_transport_switch_type_event_fixed_param,
+    WMITLV_TAG_STRUC_wmi_dbw_chan_info,
+    WMITLV_TAG_STRUC_wmi_peer_multiple_reorder_queue_setup_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_peer_per_reorder_q_setup_params_t,
+    WMITLV_TAG_STRUC_wmi_coex_multiple_config_cmd_fixed_param,
+    WMITLV_TAG_STRUC_wmi_disallowed_mlo_mode_bitmap_param,
+    WMITLV_TAG_STRUC_wmi_led_blink_rate_table,
+    WMITLV_TAG_STRUC_wmi_enable_led_blink_download_rate_table_fixed_param,
 } WMITLV_TAG_ID;
 /*
  * IMPORTANT: Please add _ALL_ WMI Commands Here.
@@ -1950,6 +1959,10 @@ typedef enum {
     OP(WMI_CSA_EVENT_STATUS_INDICATION_CMDID) \
     OP(WMI_VDEV_SCHED_MODE_PROBE_REQ_CMDID) \
     OP(WMI_VDEV_OOB_CONNECTION_REQ_CMDID) \
+    OP(WMI_AUDIO_TRANSPORT_SWITCH_RESP_STATUS_CMDID) \
+    OP(WMI_PEER_MULTIPLE_REORDER_QUEUE_SETUP_CMDID) \
+    OP(WMI_COEX_MULTIPLE_CONFIG_CMDID) \
+    OP(WMI_PDEV_ENABLE_LED_BLINK_DOWNLOAD_TABLE_CMDID) \
     /* add new CMD_LIST elements above this line */
 
 
@@ -2269,6 +2282,7 @@ typedef enum {
     OP(WMI_MLO_LINK_STATE_SWITCH_EVENTID) \
     OP(WMI_VDEV_SCHED_MODE_PROBE_RESP_EVENTID) \
     OP(WMI_VDEV_OOB_CONNECTION_RESP_EVENTID) \
+    OP(WMI_AUDIO_TRANSPORT_SWITCH_TYPE_EVENTID) \
     /* add new EVT_LIST elements above this line */
 
 
@@ -2652,7 +2666,9 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_WMM_PARAMS_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_p2p_noa_descriptor, noa_descriptors, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_start_mlo_params, mlo_params, WMITLV_SIZE_VAR) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_partner_link_params, partner_link_params, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_partner_link_params, partner_link_params, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel, dbw_chan, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dbw_chan_info, dbw_chan_info, WMITLV_SIZE_VAR)
 
 WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_START_REQUEST_CMDID);
 
@@ -2660,7 +2676,9 @@ WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_START_REQUEST_CMDID);
 #define WMITLV_TABLE_WMI_VDEV_RESTART_REQUEST_CMDID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_start_request_cmd_fixed_param, wmi_vdev_start_request_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_p2p_noa_descriptor, noa_descriptors, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_p2p_noa_descriptor, noa_descriptors, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel, dbw_chan, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dbw_chan_info, dbw_chan_info, WMITLV_SIZE_VAR)
 
 WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_RESTART_REQUEST_CMDID);
 
@@ -4608,6 +4626,12 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PEER_REORDER_QUEUE_SETUP_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_reorder_queue_remove_cmd_fixed_param, wmi_peer_reorder_queue_remove_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_PEER_REORDER_QUEUE_REMOVE_CMDID);
 
+/* peer multiple reorder queue setup cmd */
+#define WMITLV_TABLE_WMI_PEER_MULTIPLE_REORDER_QUEUE_SETUP_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_peer_multiple_reorder_queue_setup_cmd_fixed_param, wmi_peer_multiple_reorder_queue_setup_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_peer_per_reorder_q_setup_params_t, reorder_params_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PEER_MULTIPLE_REORDER_QUEUE_SETUP_CMDID);
+
 /* Filter in monitor mode parameters Cmd */
 #define WMITLV_TABLE_WMI_MNT_FILTER_CMDID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_mnt_filter_cmd_fixed_param, wmi_mnt_filter_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
@@ -4716,7 +4740,9 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_MESH_RX_FILTER_ENABLE_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_channel, wmi_channel, chan, WMITLV_SIZE_FIX) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, phymode_list, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, preferred_tx_stream_list, WMITLV_SIZE_VAR) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, preferred_rx_stream_list, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, preferred_rx_stream_list, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_channel, dbw_chan, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_dbw_chan_info, dbw_chan_info, WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_MULTIPLE_VDEV_RESTART_REQUEST_CMDID);
 
 #define WMITLV_TABLE_WMI_PDEV_UPDATE_PKT_ROUTING_CMDID(id,op,buf,len) \
@@ -5172,7 +5198,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_ENABLE_DURATION_BASED_TX_MODE_SELECTION_CMDID
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, vdev_id_bitmap, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, vdev_id_bitmap2, WMITLV_SIZE_VAR) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ieee_link_id_bitmap, WMITLV_SIZE_VAR) \
-    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ieee_link_id_bitmap2, WMITLV_SIZE_VAR)
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, ieee_link_id_bitmap2, WMITLV_SIZE_VAR) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_disallowed_mlo_mode_bitmap_param, disallow_mode_param,  WMITLV_SIZE_VAR)
 WMITLV_CREATE_PARAM_STRUC(WMI_MLO_LINK_SET_ACTIVE_CMDID);
 
 /* Request DPD Status */
@@ -5402,6 +5429,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_PARAM_ENABLE_SR_PROHIBIT_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_xgap_enable_cmd_fixed_param, wmi_xgap_enable_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_XGAP_ENABLE_CMDID);
 
+/* WMI cmd to indicate bearer switch response status (succcess, fail or timeout) to the corresponding switch type request */
+#define WMITLV_TABLE_WMI_AUDIO_TRANSPORT_SWITCH_RESP_STATUS_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_audio_transport_switch_resp_status_cmd_fixed_param, wmi_audio_transport_switch_resp_status_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_AUDIO_TRANSPORT_SWITCH_RESP_STATUS_CMDID);
+
 #define WMITLV_TABLE_WMI_ODD_LIVEDUMP_REQUEST_CMDID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_livedump_request_cmd_fixed_param, wmi_livedump_request_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_UINT32, A_UINT32, odd_livedump_id_list, WMITLV_SIZE_VAR)
@@ -5493,6 +5525,12 @@ WMITLV_CREATE_PARAM_STRUC(WMI_MLO_LINK_SWITCH_CONF_CMDID);
         WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_pdev_wsi_stats_info_cmd_fixed_param, wmi_pdev_wsi_stats_info_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_WSI_STATS_INFO_CMDID);
 
+/* Data Rate based GPIO LED blink and Rate Table Download command */
+#define WMITLV_TABLE_WMI_PDEV_ENABLE_LED_BLINK_DOWNLOAD_TABLE_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_enable_led_blink_download_rate_table_fixed_param, wmi_enable_led_blink_download_rate_table_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC,wmi_led_blink_rate_table, led_blink_rate_table, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_ENABLE_LED_BLINK_DOWNLOAD_TABLE_CMDID);
+
 /* CSA status indication  command to inform FW about host accepting or rejecting csa event*/
 #define WMITLV_TABLE_WMI_CSA_EVENT_STATUS_INDICATION_CMDID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_csa_event_status_ind_fixed_param ,  wmi_csa_event_status_ind_fixed_param,fixed_param, WMITLV_SIZE_FIX)
@@ -5506,6 +5544,12 @@ WMITLV_CREATE_PARAM_STRUC(WMI_CSA_EVENT_STATUS_INDICATION_CMDID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_oob_connection_req_cmd_fixed_param, wmi_vdev_oob_connection_req_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_OOB_CONNECTION_REQ_CMDID);
 
+/* Multiple BTCOEX config commands. */
+#define WMITLV_TABLE_WMI_COEX_MULTIPLE_CONFIG_CMDID(id,op,buf,len) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_coex_multiple_config_cmd_fixed_param, wmi_coex_multiple_config_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
+    WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_ARRAY_STRUC, WMI_COEX_CONFIG_CMD_fixed_param, config_list, WMITLV_SIZE_VAR)
+WMITLV_CREATE_PARAM_STRUC(WMI_COEX_MULTIPLE_CONFIG_CMDID);
+
 
 
 /************************** TLV definitions of WMI events *******************************/
@@ -7400,6 +7444,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_HEALTH_MON_INIT_DONE_EVENTID);
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_xgap_enable_complete_event_fixed_param, wmi_xgap_enable_complete_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
 WMITLV_CREATE_PARAM_STRUC(WMI_XGAP_ENABLE_COMPLETE_EVENTID);
 
+/* Event to switch to xpan to ble or ble to xpan */
+#define WMITLV_TABLE_WMI_AUDIO_TRANSPORT_SWITCH_TYPE_EVENTID(id,op,buf,len) \
+    WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_audio_transport_switch_type_event_fixed_param, wmi_audio_transport_switch_type_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
+WMITLV_CREATE_PARAM_STRUC(WMI_AUDIO_TRANSPORT_SWITCH_TYPE_EVENTID);
+
 /* ODD Livedump */
 #define  WMITLV_TABLE_WMI_ODD_LIVEDUMP_RESPONSE_EVENTID(id,op,buf,len) \
     WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_livedump_response_event_fixed_param, wmi_livedump_response_event_fixed_param, fixed_param, WMITLV_SIZE_FIX)
diff --git a/fw/wmi_unified.h b/fw/wmi_unified.h
index f466ba65db96..f4ada7828371 100644
--- a/fw/wmi_unified.h
+++ b/fw/wmi_unified.h
@@ -516,6 +516,11 @@ typedef enum {
     WMI_PDEV_SET_RF_PATH_CMDID,
     /** WSI stats info WMI command */
     WMI_PDEV_WSI_STATS_INFO_CMDID,
+    /*
+     * WMI cmd to Enable LED blink based on Tx+Rx Data Rate
+     * and download LED ON/OFF Rate table
+     */
+    WMI_PDEV_ENABLE_LED_BLINK_DOWNLOAD_TABLE_CMDID,
 
 
     /* VDEV (virtual device) specific commands */
@@ -761,6 +766,9 @@ typedef enum {
     /* Group SET cmd for PEERS */
     WMI_PEER_BULK_SET_CMDID,
 
+    /* WMI command to setup reorder queue for multiple TIDs */
+    WMI_PEER_MULTIPLE_REORDER_QUEUE_SETUP_CMDID,
+
     /* beacon/management specific commands */
 
     /** transmit beacon by reference . used for transmitting beacon on low latency interface like pcie */
@@ -1245,6 +1253,9 @@ typedef enum {
     /* WMI comamnd for standalone sounding */
     WMI_VDEV_STANDALONE_SOUND_CMDID,
 
+    /* WMI cmd used by host to send the switch response status to FW */
+    WMI_AUDIO_TRANSPORT_SWITCH_RESP_STATUS_CMDID,
+
     /*  Offload 11k related requests */
     WMI_11K_OFFLOAD_REPORT_CMDID = WMI_CMD_GRP_START_ID(WMI_GRP_11K_OFFLOAD),
     /* invoke neighbor report from FW */
@@ -1373,6 +1384,7 @@ typedef enum {
     WMI_COEX_DBAM_CMDID,
     WMI_TAS_POWER_HISTORY_CMDID,
     WMI_ESL_EGID_CMDID,
+    WMI_COEX_MULTIPLE_CONFIG_CMDID,
 
     /**
      *  OBSS scan offload enable/disable commands
@@ -2248,6 +2260,9 @@ typedef enum {
     /* WMI standalone command complete Event */
     WMI_VDEV_STANDALONE_SOUND_COMPLETE_EVENTID,
 
+    /* WMI evt to indicate switch type either to WLAN(XPAN) or non_WLAN(BLE) */
+    WMI_AUDIO_TRANSPORT_SWITCH_TYPE_EVENTID,
+
 
     /* GPIO Event */
     WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
@@ -4617,7 +4632,12 @@ typedef struct {
      *      Refer to the below definitions of the
      *      WMI_RSRC_CFG_HOST_SERVICE_FLAG_RADAR_FLAGS_FULL_BW_NOL_GET
      *      and _SET macros.
-     *  Bits 31:15 - Reserved
+     *  Bit 15
+     *      This bit will be set if the has qms_dlkm support enabled.
+     *      Refer to the below definitions of the
+     *      WMI_RSRC_CFG_HOST_SERVICE_FLAG_QMS_DLKM_SUPPORT_GET
+     *      and _SET macros.
+     *  Bits 31:16 - Reserved
      */
     A_UINT32 host_service_flags;
 
@@ -5065,6 +5085,11 @@ typedef struct {
 #define WMI_RSRC_CFG_HOST_SERVICE_FLAG_RADAR_FLAGS_FULL_BW_NOL_SET(host_service_flags, val) \
     WMI_SET_BITS(host_service_flags, 14, 1, val)
 
+#define WMI_RSRC_CFG_HOST_SERVICE_FLAG_QMS_DLKM_SUPPORT_GET(host_service_flags) \
+    WMI_GET_BITS(host_service_flags, 15, 1)
+#define WMI_RSRC_CFG_HOST_SERVICE_FLAG_QMS_DLKM_SUPPORT_SET(host_service_flags, val) \
+    WMI_SET_BITS(host_service_flags, 15, 1, val)
+
 
 #define WMI_RSRC_CFG_CARRIER_CFG_CHARTER_ENABLE_GET(carrier_config) \
     WMI_GET_BITS(carrier_config, 0, 1)
@@ -5917,6 +5942,7 @@ typedef enum {
 #define WMI_SCAN_FLAG_EXT_RELIABLE_SCAN       0x00010000
 #define WMI_SCAN_FLAG_EXT_FAST_SCAN           0x00020000
 #define WMI_SCAN_FLAG_EXT_LOW_POWER_SCAN      0x00040000
+#define WMI_SCAN_FLAG_EXT_STOP_IF_BSSID_FOUND 0x00080000
 
 
 /**
@@ -9325,6 +9351,24 @@ typedef enum {
 
     /** Parameter to set PDEV level UL OFDMA RTD */
     WMI_PDEV_PARAM_UL_OFDMA_RTD,
+
+    /** Parameter to enable/disable tid0 and tid3 mapping to work 3 Link MLO */
+    WMI_PDEV_PARAM_TID_MAPPING_3LINK_MLO,
+
+    /** Parameter to enable/disable small OFDMA M-RUs **/
+    WMI_PDEV_PARAM_ENABLE_SMALL_MRU,
+
+    /** Parameter to enable/disable large OFDMA M-RUs **/
+    WMI_PDEV_PARAM_ENABLE_LARGE_MRU,
+
+    /** Parameter to enable/disable delayed LMR feedback.
+     * Note: Delayed LMR feedback is supported only up to two ranging peers to
+     * enable Location certification
+     * 0 - Immediate LMR feedback is enabled for all ranging peers.
+     * 1 (non zero) - delayed LMR feedback is enabled. Third peer onward will
+     *     default to immediate LMR feedback.
+     **/
+    WMI_PDEV_PARAM_ENABLE_DELAYED_LMR_FEEDBACK,
 } WMI_PDEV_PARAM;
 
 #define WMI_PDEV_ONLY_BSR_TRIG_IS_ENABLED(trig_type) WMI_GET_BITS(trig_type, 0, 1)
@@ -9851,6 +9895,14 @@ typedef struct {
     /* current 64 bit TSF timestamp */
     A_UINT32 tx_tsf_l32;
     A_UINT32 tx_tsf_u32;
+    /* info:
+     * Bit[0:2]   - band on which frame is sent, band value will be
+     *              one of the wmi_mlo_band_info_t enum constants.
+     *              Macros WMI_ROAM_BTM_RESP_MLO_BAND_INFO_GET,SET
+     *              can be reused for setting mlo band info.
+     * Bit[3:31]  - reserved
+     */
+    A_UINT32 info;
 } wmi_mgmt_tx_compl_event_fixed_param;
 
 typedef struct {
@@ -10063,6 +10115,12 @@ typedef struct {
     wmi_channel chan;
 } wmi_pdev_set_channel_cmd;
 
+typedef struct {
+    A_UINT32 tlv_header;
+    /* DBW puncture bitmap */
+    A_UINT32 dbw_puncture_20mhz_bitmap;
+} wmi_dbw_chan_info;
+
 typedef enum {
     WMI_PKTLOG_EVENT_RX =  0x00000001,
     WMI_PKTLOG_EVENT_TX =  0x00000002,
@@ -16954,6 +17012,10 @@ typedef struct {
  *     wmi_partner_link_info link_info[]; <-- partner link info
  *         optional TLV, only present for MLO vdevs,
  *         If the vdev is non-MLO the array length should be 0.
+ *     wmi_channel dbw_chan; <-- WMI channel
+ *         optional TLV for dbw_chan
+ *     wmi_dbw_chan_info dbw_chan_info
+ *         optional TLV used for dbw_chan_info
  */
 } wmi_vdev_start_request_cmd_fixed_param;
 
@@ -18210,6 +18272,11 @@ typedef enum {
      */
     WMI_VDEV_PARAM_DISABLE_TWT_INFO_FRAME,                /* 0xC0 */
 
+    /*
+     * Set the Recommended Max allowed active links
+     */
+    WMI_VDEV_PARAM_MLO_MAX_RECOM_ACTIVE_LINKS,            /* 0xC1 */
+
 
     /*=== ADD NEW VDEV PARAM TYPES ABOVE THIS LINE ===
      * The below vdev param types are used for prototyping, and are
@@ -23366,6 +23433,8 @@ typedef enum wake_reason_e {
     WOW_REASON_COEX_CHAVD,
     /* vdev repurpose request event */
     WOW_REASON_VDEV_REPURPOSE,
+    /* STX High duty cycle event */
+    WOW_REASON_STX_WOW_HIGH_DUTY_CYCLE,
 
     /* add new WOW_REASON_ defs before this line */
     WOW_REASON_MAX,
@@ -31235,8 +31304,16 @@ typedef enum {
     TSF_TSTAMP_QTIMER_CAPTURE_REQ = 4,
     TSF_TSTAMP_AUTO_REPORT_ENABLE = 5,
     TSF_TSTAMP_AUTO_REPORT_DISABLE = 6,
+    TSF_TSTAMP_PERIODIC_REPORT_REQ = 5,
 } wmi_tsf_tstamp_action;
 
+typedef enum {
+    TSF_TSTAMP_REPORT_TTIMER = 0x1, /* bit 0: TSF Timer */
+    TSF_TSTAMP_REPORT_QTIMER = 0x2, /* bit 1: H/T common Timer */
+} wmi_tsf_tstamp_report_flags;
+
+#define TSF_TSTAMP_REPORT_PERIOD_MIN   1000    /* ms units */
+
 typedef struct {
     /** TLV tag and len; tag equals
      * WMITLV_TAG_STRUC_wmi_vdev_tsf_tstamp_action_cmd_fixed_param */
@@ -31245,6 +31322,12 @@ typedef struct {
     A_UINT32 vdev_id;
     /* action type, refer to wmi_tsf_tstamp_action */
     A_UINT32 tsf_action;
+    /*
+     * The below fields are valid only when tsf_action is
+     * TSF_TSTAMP_PERIODIC_REPORT_REQ.
+     */
+    A_UINT32 period; /* the period of report timestamp, ms units */
+    A_UINT32 flags;  /* wmi_tsf_tstamp_report_flags */
 } wmi_vdev_tsf_tstamp_action_cmd_fixed_param;
 
 typedef struct {
@@ -31714,6 +31797,39 @@ typedef struct {
                               * established or terminated for the TID. */
 } wmi_peer_reorder_queue_setup_cmd_fixed_param;
 
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_per_reorder_q_setup_params_t */
+    A_UINT32 tid; /* 0 to 15 = QoS TIDs, 16 = non-qos TID */
+    A_UINT32 queue_ptr_lo; /* lower 32 bits of queue desc address */
+    A_UINT32 queue_ptr_hi; /* upper 32 bits of queue desc address */
+    A_UINT32 queue_no; /* 16-bit number assigned by host for queue,
+                        * stored in bits 15:0 of queue_no field */
+    A_UINT32 ba_window_size_valid; /* Is ba_window_size valid?
+                                    * 0 = Invalid, 1 = Valid */
+    A_UINT32 ba_window_size; /* Valid values: 0 to 256
+                              * Host sends the message when BA session is
+                              * established or terminated for the TID. */
+} wmi_peer_per_reorder_q_setup_params_t;
+
+/**
+ * This command is sent from WLAN host driver to firmware for
+ * plugging in reorder queue desc to hw for multiple TIDs in one shot.
+ *
+ * Example: plug-in queue desc
+ *    host->target: WMI_PEER_MULTIPLE_REORDER_QUEUE_SETUP_CMDID,
+ *                  (vdev_id = PEER vdev id,
+ *                   peer_macaddr = PEER mac addr)
+ */
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_peer_multiple_reorder_queue_setup_cmd_fixed_param */
+    A_UINT32 vdev_id;
+    wmi_mac_addr peer_macaddr; /* peer mac address */
+/*
+ * This struct is followed by other TLVs:
+ *   wmi_peer_per_reorder_q_setup_params_t q_setup_params[num_queues];
+ */
+} wmi_peer_multiple_reorder_queue_setup_cmd_fixed_param;
+
 /**
  * This command is sent from WLAN host driver to firmware for
  * removing one or more reorder queue desc to lithium hw.
@@ -34623,7 +34739,7 @@ typedef enum wmi_coex_config_type {
 } WMI_COEX_CONFIG_TYPE;
 
 typedef struct {
-    A_UINT32 tlv_header;
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_WMI_COEX_CONFIG_CMD_fixed_param */
     A_UINT32 vdev_id;
     A_UINT32 config_type; /* wmi_coex_config_type enum */
     A_UINT32 config_arg1;
@@ -34634,6 +34750,14 @@ typedef struct {
     A_UINT32 config_arg6;
 } WMI_COEX_CONFIG_CMD_fixed_param;
 
+typedef struct {
+    A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_coex_multiple_config_cmd_fixed_param */
+    /*
+     * This struct is followed by other TLVs:
+     *   WMI_COEX_CONFIG_CMD_fixed_param config_list[num_config];
+     */
+} wmi_coex_multiple_config_cmd_fixed_param;
+
 typedef enum wmi_coex_dbam_mode_type {
     WMI_COEX_DBAM_DISABLE = 0,
     WMI_COEX_DBAM_ENABLE = 1,
@@ -36981,6 +37105,10 @@ static INLINE A_UINT8 *wmi_id_to_name(A_UINT32 wmi_command)
         WMI_RETURN_STRING(WMI_CSA_EVENT_STATUS_INDICATION_CMDID);
         WMI_RETURN_STRING(WMI_VDEV_SCHED_MODE_PROBE_REQ_CMDID);
         WMI_RETURN_STRING(WMI_VDEV_OOB_CONNECTION_REQ_CMDID);
+        WMI_RETURN_STRING(WMI_AUDIO_TRANSPORT_SWITCH_RESP_STATUS_CMDID);
+        WMI_RETURN_STRING(WMI_PEER_MULTIPLE_REORDER_QUEUE_SETUP_CMDID);
+        WMI_RETURN_STRING(WMI_COEX_MULTIPLE_CONFIG_CMDID);
+        WMI_RETURN_STRING(WMI_PDEV_ENABLE_LED_BLINK_DOWNLOAD_TABLE_CMDID);
     }
 
     return (A_UINT8 *) "Invalid WMI cmd";
@@ -37876,6 +38004,10 @@ typedef struct {
      *    with vdev ID as index.
      * A_UINT32 preferred_rx_streams[]; <-- Array of preferred_rx_streams
      *    with vdev ID as index.
+     * wmi_channel dbw_chan; <-- WMI channel
+     *     optional TLV for dbw_chan
+     * wmi_dbw_chan_info dbw_chan_info
+     *     optional TLV used for dbw_chan_info
      */
 } wmi_pdev_multiple_vdev_restart_request_cmd_fixed_param;
 
@@ -40243,6 +40375,14 @@ typedef struct {
     A_UINT32 scoring_capability_bitmap;
 } wmi_roam_capability_report_event_fixed_param;
 
+/*
+ * Definition of disallow connection modes.
+ */
+typedef enum {
+    /* Bit 0: roam to 5GL+5GH MLSR is not allowed if the bit is set. */
+    WMI_ROAM_MLO_CONNECTION_MODE_5GL_5GH_MLSR = 0x1,
+} WMI_ROAM_MLO_CONNECTION_MODES;
+
 typedef struct {
     A_UINT32 tlv_header; /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_mlo_config_cmd_fixed_param */
     wmi_mac_addr partner_link_addr; /* Assigned link address which can be used as self link addr when vdev is not created */
@@ -40262,6 +40402,13 @@ typedef struct {
      */
     A_UINT32 support_link_band; /* Configure the band bitmap of mlo connection supports. */
     A_UINT32 max_active_links; /* Max active links supported for STA */
+
+    /*
+     * Disallow the specified connection mode(s) when roaming to MLD AP.
+     * Refer to the WMI_ROAM_MLO_CONNECTION_MODES enum for the connection mode
+     * each bit represents.
+     */
+    A_UINT32 disallow_connect_modes;
 } wmi_roam_mlo_config_cmd_fixed_param;
 
 typedef struct {
@@ -43751,6 +43898,7 @@ enum wmi_oem_data_evt_cause {
     WMI_OEM_DATA_EVT_CAUSE_UNSPECIFIED = 0,
     WMI_OEM_DATA_EVT_CAUSE_CMD_REQ = 1,
     WMI_OEM_DATA_EVT_CAUSE_ASYNC = 2,
+    WMI_OEM_DATA_EVT_CAUSE_QMS = 3,
 };
 
 typedef struct {
@@ -44578,6 +44726,7 @@ typedef enum {
     WMI_MLO_LINK_FORCE_INACTIVE_LINK_NUM      = 4, /* Force inactive a number of links, firmware to decide which links to inactive */
     WMI_MLO_LINK_NO_FORCE                     = 5, /* Cancel the force operation of specific links, allow firmware to decide */
     WMI_MLO_LINK_FORCE_ACTIVE_INACTIVE        = 6, /* combination of force specific links active & force specific links inactive */
+    WMI_MLO_LINK_NON_FORCE_UPDATE             = 7, /* Used when host wants to update other fields like disallow_mlo_mode_bmap */
 } WMI_MLO_LINK_FORCE_MODE;
 
 typedef enum {
@@ -44671,6 +44820,8 @@ typedef struct wmi_mlo_link_set_active_cmd
  *     For force mode WMI_MLO_LINK_FORCE_ACTIVE_INACTIVE ieee_link_id_bitmap2[]
  *     carry the inactive linkid bitmap.
  *     In other cases the length of the array should be 0.
+ *---
+ * wmi_disallowed_mlo_mode_bitmap_param_t disallow_mlo_mode_bmap[];
  */
 } wmi_mlo_link_set_active_cmd_fixed_param;
 
@@ -44692,6 +44843,77 @@ typedef struct wmi_mlo_set_active_link_number_param
 
 } wmi_mlo_set_active_link_number_param;
 
+#define WMI_MLO_MODE_MLMR  0x1;
+#define WMI_MLO_MODE_EMLSR 0x2;
+
+
+#define WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID1(ieee_link_id_comb) WMI_GET_BITS(ieee_link_id_comb, 0, 8)
+#define WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID1(ieee_link_id_comb, value) WMI_SET_BITS(ieee_link_id_comb, 0, 8, value)
+
+#define WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID2(ieee_link_id_comb) WMI_GET_BITS(ieee_link_id_comb, 8, 8)
+#define WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID2(ieee_link_id_comb, value) WMI_SET_BITS(ieee_link_id_comb, 8, 8, value)
+
+#define WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID3(ieee_link_id_comb) WMI_GET_BITS(ieee_link_id_comb, 16, 8)
+#define WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID3(ieee_link_id_comb, value) WMI_SET_BITS(ieee_link_id_comb, 16, 8, value)
+
+#define WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID4(ieee_link_id_comb) WMI_GET_BITS(ieee_link_id_comb, 24, 8)
+#define WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID4(ieee_link_id_comb, value) WMI_SET_BITS(ieee_link_id_comb, 24, 8, value)
+
+
+typedef struct wmi_disallowed_mlo_mode_bitmap_param
+{
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_disallowed_mlo_mode_bitmap_param */
+    A_UINT32 tlv_header;
+    /** disallowed_mode_bitmap:
+     * Bitmap of MLO Modes like MLMR, eMLSR which are not allowed.
+     * Refer to WMI_MLO_MODE_*
+     * disallowed_mode_bitmap          Meaning
+     * ======================          =================
+     *   0x0                           No restriction
+     *   0x1                           MLMR is not allowed
+     *   0x2                           EMLSR is not allowed
+     *   0x3                           MLMR and EMLSR are not allowed
+     */
+    A_UINT32 disallowed_mode_bitmap;
+
+    /** ieee_link_id_comb:
+     * Give combination of IEEE link IDs for which above disallowed_mode_bitmap
+     * is applicable.
+     * Each 8-bits in ieee_link_id_comb represents one link ID.
+     * Use WMI_MLO_IEEE_LINK_ID_COMB_GET_LINK_ID* and _SET_LINK_ID* to get/set
+     * link IDs in this field.
+     */
+    A_UINT32 ieee_link_id_comb;
+
+
+    /** Example:
+     * Say there are 3 MLO links with ieee link IDs as 1,2 and 32.
+     * Say host wants to disallow MLMR between links with IDs 1 and 2,
+     *                   disallow eMLSR between links with IDs 1 and 32,
+     *                   disallow MLMR and eMLSR for links with IDs 2 and 32.
+     * There will be 3 TLVs of type wmi_disallowed_mlo_mode_bitmap_param
+     * like below.
+     *
+     *  wmi_disallowed_mlo_mode_bitmap_param[0]:
+     *       disallowed_mode_bitmap = 0x1,
+     *       ieee_link_id_comb = 0x00000201
+     *          WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID1(ieee_link_id_comb, 0x1)
+     *          WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID2(ieee_link_id_comb, 0x2)
+     *
+     *  wmi_disallowed_mlo_mode_bitmap_param[1]
+     *       disallowed_mode_bitmap = 0x2,
+     *       ieee_link_id_comb = 0x00002001
+     *          WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID1(ieee_link_id_comb, 0x1)
+     *          WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID2(ieee_link_id_comb, 0x20)
+     *
+     *  wmi_disallowed_mlo_mode_bitmap_param[2]
+     *       disallowed_mode_bitmap = 0x3,
+     *       ieee_link_id_comb = 0x00002002
+     *          WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID1(ieee_link_id_comb, 0x2)
+     *          WMI_MLO_IEEE_LINK_ID_COMB_SET_LINK_ID2(ieee_link_id_comb, 0x20)
+     */
+} wmi_disallowed_mlo_mode_bitmap_param;
+
 typedef enum {
     WMI_MLO_LINK_SET_ACTIVE_STATUS_SUCCESS     = 0,
     WMI_MLO_LINK_SET_ACTIVE_STATUS_HOST_REJECT = 1,
@@ -47038,6 +47260,39 @@ typedef struct {
     A_UINT32 pdev_id;
 } wmi_pdev_utf_event_fixed_param;
 
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_led_blink_rate_table */
+    A_UINT32 tlv_header;
+
+    A_UINT32 on_time;  /* units = milliseconds */
+    A_UINT32 off_time; /* units = milliseconds */
+} wmi_led_blink_rate_table;
+
+typedef struct {
+    /** TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_enable_led_blink_download_rate_table_fixed_param */
+    A_UINT32 tlv_header;
+    /* Pdev Id 0 or 1 based on split phy */
+    A_UINT32 pdev_id;
+    /* Feature enable or disable flag 0-disable 1-enable  */
+    A_UINT32 blink_enable_flag;
+    /* Bandwidth (Mbps) of each index in the blink rate table.
+     * This quantum specification tells the FW which of the blink rate table
+     * elements to use; the FW will divide the data rate by this bw_per_index
+     * and round down, to obtain the index into the rate table for the blink
+     * rate corresponding to the data rate.
+     */
+    A_UINT32 bw_per_index;
+
+    /**
+     * Following this fixed_param TLV are the following additional TLVs:
+     *   - wmi_led_blink_rate_table led_blink_rate_table[]
+     *     The led_blink_rate_table[] elements need to be ordered by
+     *     increasing data rate, so that by dividing the data rate by
+     *     bw_per_index, the FW can find which index/element of the
+     *     led_blink_rate_table[] array to use.
+     */
+} wmi_enable_led_blink_download_rate_table_fixed_param;
+
 typedef enum {
     /* Used when peer attempts connection with vdev */
     VDEV_OOB_CONNECT_REQUEST = 0,
@@ -47085,6 +47340,35 @@ typedef struct {
     A_UINT32 connect_resp_type;
 } wmi_vdev_oob_connection_resp_event_fixed_param;
 
+typedef enum {
+    WMI_AUDIO_TRANSPORT_SWITCH_STATUS_FAIL = 0,
+    WMI_AUDIO_TRANSPORT_SWITCH_STATUS_SUCCESS,
+    WMI_AUDIO_TRANSPORT_SWITCH_STATUS_TIMEOUT,
+} WMI_AUDIO_TRANSPORT_SWITCH_RESPONSE_STATUS;
+
+typedef enum {
+    WMI_AUDIO_TRANSPORT_SWITCH_TYPE_NON_WLAN = 0,
+    WMI_AUDIO_TRANSPORT_SWITCH_TYPE_WLAN = 1,
+} WMI_AUDIO_TRANSPORT_SWITCH_TYPE;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+    * WMITLV_TAG_STRUC_wmi_audio_transport_switch_type_event_fixed_param */
+    A_UINT32 tlv_header;
+    /** This indicates whether FW is requesting for switch to WLAN(XPAN) or non-WLAN(BLE) */
+    A_UINT32 switch_type;  /*see definition of WMI_AUDIO_TRANSPORT_SWITCH_TYPE */
+} wmi_audio_transport_switch_type_event_fixed_param;
+
+typedef struct {
+    /** TLV tag and len; tag equals
+    * WMITLV_TAG_STRUC_wmi_audio_transport_switch_resp_status_cmd_fixed_param */
+    A_UINT32 tlv_header;
+    /** This indicates whether switch response status is success, fail, timeout */
+    A_UINT32 switch_response_status;  /* see definition of WMI_AUDIO_TRANSPORT_SWITCH_RESPONSE_STATUS */
+    /** This indicates for which switch type (WLAN(XPAN) or non-WLAN(BLE)) the switch response status is intended to */
+    A_UINT32 switch_type;  /* see definition of WMI_AUDIO_TRANSPORT_SWITCH_TYPE */
+} wmi_audio_transport_switch_resp_status_cmd_fixed_param;
+
 
 
 /* ADD NEW DEFS HERE */
diff --git a/fw/wmi_version.h b/fw/wmi_version.h
index 6a0636cb656c..e898ce8680f4 100644
--- a/fw/wmi_version.h
+++ b/fw/wmi_version.h
@@ -37,7 +37,7 @@
 #define __WMI_VER_MINOR_    0
 /** WMI revision number has to be incremented when there is a
  *  change that may or may not break compatibility. */
-#define __WMI_REVISION_ 1405
+#define __WMI_REVISION_ 1421
 
 /** The Version Namespace should not be normally changed. Only
  *  host and firmware of the same WMI namespace will work