A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-29 19:21:31 -04:00
Code Issues Projects Releases Packages Wiki Activity

mfd: sec-core: Disable buck voltage reset on watchdog falling edge

Browse source 
The WRSTBI bit (disabled by default but enabled by bootloader), when
set, is responsible for resetting voltages to default values of
certain bucks on falling edge of Warm Reset Input pin from AP.

However on some boards (with S2MPS13) the pin is pulled down so any
suspend will effectively trigger the reset of bucks supplying the power
to the little and big cores. In the same time when resuming, these bucks
must provide voltage greater or equal to voltage before suspend to match
the frequency chosen by cpufreq. If voltage (default value of voltage
after reset) is lower than one set by cpufreq before suspend, then
system will hang during resuming.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reported-by: Bartlomiej Zolnierkiewicz <[email protected]>
Tested-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
This commit is contained in:
Krzysztof Kozlowski 2015-10-07 09:44:41 +09:00 • committed by Lee Jones
commit 8a97d4287e
3 changed files with 29 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

26
drivers/mfd/sec-core.c
View file

@ -262,6 +262,29 @@ static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)
dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", val);
}
static void sec_pmic_configure(struct sec_pmic_dev *sec_pmic)
{
int err;
if (sec_pmic->device_type != S2MPS13X)
return;
if (sec_pmic->pdata->disable_wrstbi) {
/*
* If WRSTBI pin is pulled down this feature must be disabled
* because each Suspend to RAM will trigger buck voltage reset
* to default values.
*/
err = regmap_update_bits(sec_pmic->regmap_pmic,
S2MPS13_REG_WRSTBI,
S2MPS13_REG_WRSTBI_MASK, 0x0);
if (err)
dev_warn(sec_pmic->dev,
"Cannot initialize WRSTBI config: %d\n",
err);
}
}
#ifdef CONFIG_OF
/*
* Only the common platform data elements for s5m8767 are parsed here from the
@ -289,6 +312,8 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
pd->manual_poweroff = of_property_read_bool(dev->of_node,
"samsung,s2mps11-acokb-ground");
pd->disable_wrstbi = of_property_read_bool(dev->of_node,
"samsung,s2mps11-wrstbi-ground");
return pd;
}
#else
@ -434,6 +459,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
goto err_mfd;
device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup);
sec_pmic_configure(sec_pmic);
sec_pmic_dump_rev(sec_pmic);
return ret;