[ARM] i.MX serial: fix tx buffer overflows

Fix occasional tx buffer overflows in the i.MX serial driver which came
from the fact that space in the buffer was checked after sending the first
byte.  Also, fifosize is 32 bytes, not 8.

Signed-off-by: Sascha Hauer <[email protected]
Acked-by: Pavel Pisa <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Russell King <[email protected]>
This commit is contained in:
Sascha Hauer 2007-02-05 16:10:16 -08:00 • committed by Russell King
commit 8c0b254b7e

View file

@ -154,7 +154,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
{
struct circ_buf *xmit = &sport->port.info->xmit;
do {
while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail];
@ -163,7 +163,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
sport->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
} while (!(UTS((u32)sport->port.membase) & UTS_TXFULL));
}
if (uart_circ_empty(xmit))
imx_stop_tx(&sport->port);
@ -178,8 +178,7 @@ static void imx_start_tx(struct uart_port *port)
UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN;
if(UTS((u32)sport->port.membase) & UTS_TXEMPTY)
imx_transmit_buffer(sport);
imx_transmit_buffer(sport);
}
static irqreturn_t imx_rtsint(int irq, void *dev_id)
@ -678,7 +677,7 @@ static struct imx_port imx_ports[] = {
.mapbase = IMX_UART1_BASE, /* FIXME */
.irq = UART1_MINT_RX,
.uartclk = 16000000,
.fifosize = 8,
.fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 0,
@ -694,7 +693,7 @@ static struct imx_port imx_ports[] = {
.mapbase = IMX_UART2_BASE, /* FIXME */
.irq = UART2_MINT_RX,
.uartclk = 16000000,
.fifosize = 8,
.fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 1,