diff --git a/qcom/pm2250.dtsi b/qcom/pm2250.dtsi
index f9b8bb82e9a0..aa231533cbf6 100644
--- a/qcom/pm2250.dtsi
+++ b/qcom/pm2250.dtsi
@@ -13,17 +13,17 @@
 	qcom,pm2250@0 {
 		compatible = "qcom,spmi-pmic";
 		reg = <0 SPMI_USID>;
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm2250_revid: qcom,revid@100 {
 			compatible = "qcom,qpnp-revid";
-			reg = <0x100 0x100>;
+			reg = <0x100>;
 		};
 
 		qcom,power-on@800 {
 			compatible = "qcom,qpnp-power-on";
-			reg = <0x800 0x100>;
+			reg = <0x800>;
 			interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>,
 					<0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "kpdpwr", "resin";
@@ -47,7 +47,7 @@
 
 		pm2250_tz: qcom,temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 			io-channels = <&pm2250_vadc ADC5_DIE_TEMP>;
 			io-channel-names = "thermal";
@@ -57,7 +57,7 @@
 
 		pm2250_vadc: vadc@3100 {
 			compatible = "qcom,spmi-adc5-lite";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			reg-names = "adc5-usr-base";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,7 +158,7 @@
 
 		pm2250_gpios: pinctrl@c000 {
 			compatible = "qcom,spmi-gpio";
-			reg = <0xc000 0xa00>;
+			reg = <0xc000>;
 			interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>,
 					<0x0 0xc1 0 IRQ_TYPE_NONE>,
 					<0x0 0xc2 0 IRQ_TYPE_NONE>,
@@ -204,7 +204,7 @@
 
 			qcom,qgauge@4800 {
 				status = "okay";
-				reg = <0x4800 0x100>;
+				reg = <0x4800>;
 				interrupts =
 					<0x0 0x48 0x2 IRQ_TYPE_EDGE_RISING>,
 					<0x0 0x48 0x3 IRQ_TYPE_EDGE_RISING>,
@@ -216,7 +216,7 @@
 
 			qcom,qg-sdam@b600 {
 				status = "okay";
-				reg = <0xb600 0x100>;
+				reg = <0xb600>;
 			};
 		};
 
@@ -228,7 +228,7 @@
 
 			qcom,pmic-revid = <&pm2250_revid>;
 			qcom,chgr@1000 {
-				reg = <0x1000 0x100>;
+				reg = <0x1000>;
 				interrupts =
 					<0x0 0x10 0x1 IRQ_TYPE_EDGE_RISING>,
 					<0x0 0x10 0x0 IRQ_TYPE_EDGE_RISING>,
@@ -242,7 +242,7 @@
 			};
 
 			qcom,dcdc@1100 {
-				reg = <0x1100 0x100>;
+				reg = <0x1100>;
 				interrupts =
 					<0x0 0x11 0x0 IRQ_TYPE_EDGE_RISING>,
 					<0x0 0x11 0x1 IRQ_TYPE_EDGE_RISING>,
@@ -258,7 +258,7 @@
 			};
 
 			qcom,batif@1200 {
-				reg = <0x1200 0x100>;
+				reg = <0x1200>;
 				interrupts =
 					<0x0 0x12 0x0 IRQ_TYPE_EDGE_BOTH>,
 					<0x0 0x12 0x1 IRQ_TYPE_EDGE_BOTH>,
@@ -274,7 +274,7 @@
 			};
 
 			qcom,usb@1300 {
-				reg = <0x1300 0x100>;
+				reg = <0x1300>;
 				interrupts =
 					<0x0 0x13 0x0 IRQ_TYPE_EDGE_BOTH>,
 					<0x0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>,
@@ -292,7 +292,7 @@
 			};
 
 			qcom,typec@1500 {
-				reg = <0x1500 0x100>;
+				reg = <0x1500>;
 				interrupts =
 					<0x0 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,
 					<0x0 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,
@@ -312,7 +312,7 @@
 			};
 
 			qcom,misc@1600 {
-				reg = <0x1600 0x100>;
+				reg = <0x1600>;
 				interrupts =
 					<0x0 0x16 0x0 IRQ_TYPE_EDGE_RISING>,
 					<0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
@@ -332,7 +332,7 @@
 			};
 
 			qcom,schgm-flashlite@a600 {
-				reg = <0xa600 0x100>;
+				reg = <0xa600>;
 				interrupts =
 					<0x0 0xa6 0x2 IRQ_TYPE_EDGE_RISING>,
 					<0x0 0xa6 0x5 IRQ_TYPE_EDGE_RISING>,
@@ -350,19 +350,19 @@
 	pm2250_1: qcom,pm2250@1 {
 		compatible = "qcom,spmi-pmic";
 		reg = <1 SPMI_USID>;
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm2250_vib: qcom,vibrator@5600 {
 			compatible = "qcom,qpnp-vibrator-ldo";
-			reg = <0x5600 0x100>;
+			reg = <0x5600>;
 			qcom,vib-ldo-volt-uv = <3000000>;
 			qcom,disable-overdrive;
 		};
 
 		pm2250_pwm1: qcom,pwms@bc00 {
 			compatible = "qcom,pwm-lpg";
-			reg = <0xbc00 0x100>;
+			reg = <0xbc00>;
 			reg-names = "lpg-base";
 			qcom,num-lpg-channels = <1>;
 			#pwm-cells = <2>;
@@ -370,7 +370,7 @@
 
 		pm2250_pwm2: qcom,pwms@bd00 {
 			compatible = "qcom,pwm-lpg";
-			reg = <0xbd00 0x100>;
+			reg = <0xbd00>;
 			reg-names = "lpg-base";
 			qcom,num-lpg-channels = <1>;
 			#pwm-cells = <2>;
@@ -378,7 +378,7 @@
 
 		pm2250_pwm3: qcom,pwms@be00 {
 			compatible = "qcom,pwm-lpg";
-			reg = <0xbe00 0x100>;
+			reg = <0xbe00>;
 			reg-names = "lpg-base";
 			qcom,num-lpg-channels = <1>;
 			#pwm-cells = <2>;