ARM: dts: msm: Adding IPA node for shima target

Adding IPA node for shima target.

Change-Id: I546b8db104301dd25b6cb56b410a7e2b8004aab1
This commit is contained in:
Ashok Vuyyuru 2020-06-25 00:41:52 +05:30
commit 8d968188fe

View file

@ -2597,6 +2597,141 @@
qcom,bt-vdd-rfa2-config = <1350000 1350000 0 1>;
qcom,bt-vdd-asd-config = <2800000 2800000 0 1>;
};
qcom,msm_gsi {
compatible = "qcom,msm_gsi";
};
qcom,rmnet-ipa {
compatible = "qcom,rmnet-ipa3";
qcom,rmnet-ipa-ssr;
qcom,ipa-platform-type-msm;
qcom,ipa-advertise-sg-support;
qcom,ipa-napi-enable;
};
qcom,ipa_fws {
compatible = "qcom,pil-tz-generic";
qcom,pas-id = <0xf>;
qcom,firmware-name = "ipa_fws";
qcom,pil-force-shutdown;
memory-region = <&pil_ipa_gsi_mem>;
};
ipa_hw: qcom,ipa@1e00000 {
compatible = "qcom,ipa";
mboxes = <&qmp_aop 0>;
reg =
<0x1e00000 0x84000>,
<0x1e04000 0x23000>;
reg-names = "ipa-base", "gsi-base";
interrupts =
<0 654 IRQ_TYPE_LEVEL_HIGH>,
<0 432 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ipa-irq", "gsi-irq";
qcom,ipa-hw-ver = <19>; /* IPA core version = IPAv4.9 */
qcom,ipa-hw-mode = <0>;
qcom,platform-type = <1>; /* MSM platform */
qcom,ee = <0>;
qcom,use-ipa-tethering-bridge;
qcom,modem-cfg-emb-pipe-flt;
qcom,ipa-wdi3-over-gsi;
qcom,arm-smmu;
qcom,smmu-fast-map;
qcom,use-64-bit-dma-mask;
qcom,ipa-endp-delay-wa;
qcom,lan-rx-napi;
qcom,tx-napi;
qcom,wan-use-skb-page;
qcom,rmnet-ctl-enable;
qcom,ipa-uc-holb-monitor;
qcom,ipa-holb-monitor-poll-period = <5>;
qcom,ipa-holb-monitor-max-cnt-wlan = <10>;
qcom,ipa-holb-monitor-max-cnt-usb = <10>;
qcom,ipa-holb-monitor-max-cnt-11ad = <10>;
qcom,tx-wrapper-cache-max-size = <400>;
qcom,ipa-gpi-event-rp-ddr;
clock-names = "core_clk";
clocks = <&rpmhcc RPMH_IPA_CLK>;
qcom,interconnect,num-cases = <5>;
qcom,interconnect,num-paths = <3>;
interconnects = <&aggre2_noc MASTER_IPA &gem_noc SLAVE_LLCC>,
<&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
interconnect-names = "ipa_to_llcc", "llcc_to_ebi1", "appss_to_ipa";
/* No vote */
qcom,no-vote =
<0 0 0 0 0 0>;
/* SVS2 */
qcom,svs2 =
<150000 600000 150000 1804000 0 74000>;
/* SVS */
qcom,svs =
<625000 1200000 625000 3072000 0 150000>;
/* NOMINAL */
qcom,nominal =
<1250000 2400000 1250000 6220800 0 400000>;
/* TURBO */
qcom,turbo =
<2000000 3500000 2000000 7219200 0 400000>;
qcom,bus-vector-names = "MIN", "SVS2", "SVS", "NOMINAL",
"TURBO";
qcom,throughput-threshold = <600 2500 5000>;
qcom,scaling-exceptions = <>;
/* smp2p information */
qcom,smp2p_map_ipa_1_out {
compatible = "qcom,smp2p-map-ipa-1-out";
qcom,smem-states = <&smp2p_ipa_1_out 0>;
qcom,smem-state-names = "ipa-smp2p-out";
};
qcom,smp2p_map_ipa_1_in {
compatible = "qcom,smp2p-map-ipa-1-in";
interrupts-extended = <&smp2p_ipa_1_in 0 0>;
interrupt-names = "ipa-smp2p-in";
};
ipa_smmu_ap: ipa_smmu_ap {
compatible = "qcom,ipa-smmu-ap-cb";
iommus = <&apps_smmu 0x480 0x0>;
qcom,iommu-dma-addr-pool = <0x20000000 0x20000000>;
qcom,additional-mapping =
/* modem tables in IMEM */
<0x146A8000 0x146A8000 0x2000>;
dma-coherent;
qcom,iommu-dma = "fastmap";
qcom,ipa-q6-smem-size = <36864>;
};
ipa_smmu_wlan: ipa_smmu_wlan {
compatible = "qcom,ipa-smmu-wlan-cb";
iommus = <&apps_smmu 0x481 0x0>;
qcom,iommu-dma = "atomic";
dma-coherent;
};
ipa_smmu_uc: ipa_smmu_uc {
compatible = "qcom,ipa-smmu-uc-cb";
iommus = <&apps_smmu 0x482 0x0>;
qcom,iommu-dma-addr-pool = <0x20000000 0x20000000>;
qcom,iommu-dma = "atomic";
};
ipa_smmu_11ad: ipa_smmu_11ad {
compatible = "qcom,ipa-smmu-11ad-cb";
iommus = <&apps_smmu 0x483 0x0>;
dma-coherent;
qcom,shared-cb;
qcom,iommu-group = <>;
};
};
};
#include "shima-pinctrl.dtsi"