From c87e851b23e5cb2ba90a3049ef38340ed7d5746f Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 5 Jan 2021 13:02:35 +0100 Subject: [PATCH 01/61] vt: drop old FONT ioctls commit ff2047fb755d4415ec3c70ac799889371151796d upstream. Drop support for these ioctls: * PIO_FONT, PIO_FONTX * GIO_FONT, GIO_FONTX * PIO_FONTRESET As was demonstrated by commit 90bfdeef83f1 (tty: make FONTX ioctl use the tty pointer they were actually passed), these ioctls are not used from userspace, as: 1) they used to be broken (set up font on current console, not the open one) and racy (before the commit above) 2) KDFONTOP ioctl is used for years instead Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes PIO_FONTRESET just return an error. We are removing KD_FONT_FLAG_OLD here as it was used only by these removed ioctls. kd.h header exists both in kernel and uapi headers, so we can remove the kernel one completely. Everyone includeing kd.h will now automatically get the uapi one. There are now unused definitions of the ioctl numbers and "struct consolefontdesc" in kd.h, but as it is a uapi header, I am not touching these. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz Cc: guodaxing Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 39 +--------- drivers/tty/vt/vt_ioctl.c | 147 -------------------------------------- include/linux/kd.h | 8 --- 3 files changed, 3 insertions(+), 191 deletions(-) delete mode 100644 include/linux/kd.h diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index d1ab8561e258..c3df1660cb5c 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -4541,16 +4541,8 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op) if (op->data && font.charcount > op->charcount) rc = -ENOSPC; - if (!(op->flags & KD_FONT_FLAG_OLD)) { - if (font.width > op->width || font.height > op->height) - rc = -ENOSPC; - } else { - if (font.width != 8) - rc = -EIO; - else if ((op->height && font.height > op->height) || - font.height > 32) - rc = -ENOSPC; - } + if (font.width > op->width || font.height > op->height) + rc = -ENOSPC; if (rc) goto out; @@ -4578,7 +4570,7 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op) return -EINVAL; if (op->charcount > 512) return -EINVAL; - if (op->width <= 0 || op->width > 32 || op->height > 32) + if (op->width <= 0 || op->width > 32 || !op->height || op->height > 32) return -EINVAL; size = (op->width+7)/8 * 32 * op->charcount; if (size > max_font_size) @@ -4588,31 +4580,6 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op) if (IS_ERR(font.data)) return PTR_ERR(font.data); - if (!op->height) { /* Need to guess font height [compat] */ - int h, i; - u8 *charmap = font.data; - - /* - * If from KDFONTOP ioctl, don't allow things which can be done - * in userland,so that we can get rid of this soon - */ - if (!(op->flags & KD_FONT_FLAG_OLD)) { - kfree(font.data); - return -EINVAL; - } - - for (h = 32; h > 0; h--) - for (i = 0; i < op->charcount; i++) - if (charmap[32*i+h-1]) - goto nonzero; - - kfree(font.data); - return -EINVAL; - - nonzero: - op->height = h; - } - font.charcount = op->charcount; font.width = op->width; font.height = op->height; diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 312857168dad..f623b3859e98 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -241,48 +241,6 @@ int vt_waitactive(int n) #define GPLAST 0x3df #define GPNUM (GPLAST - GPFIRST + 1) - - -static inline int -do_fontx_ioctl(struct vc_data *vc, int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op) -{ - struct consolefontdesc cfdarg; - int i; - - if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc))) - return -EFAULT; - - switch (cmd) { - case PIO_FONTX: - if (!perm) - return -EPERM; - op->op = KD_FONT_OP_SET; - op->flags = KD_FONT_FLAG_OLD; - op->width = 8; - op->height = cfdarg.charheight; - op->charcount = cfdarg.charcount; - op->data = cfdarg.chardata; - return con_font_op(vc, op); - - case GIO_FONTX: - op->op = KD_FONT_OP_GET; - op->flags = KD_FONT_FLAG_OLD; - op->width = 8; - op->height = cfdarg.charheight; - op->charcount = cfdarg.charcount; - op->data = cfdarg.chardata; - i = con_font_op(vc, op); - if (i) - return i; - cfdarg.charheight = op->height; - cfdarg.charcount = op->charcount; - if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc))) - return -EFAULT; - return 0; - } - return -EINVAL; -} - static inline int do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_data *vc) { @@ -919,30 +877,6 @@ int vt_ioctl(struct tty_struct *tty, break; } - case PIO_FONT: { - if (!perm) - return -EPERM; - op.op = KD_FONT_OP_SET; - op.flags = KD_FONT_FLAG_OLD | KD_FONT_FLAG_DONT_RECALC; /* Compatibility */ - op.width = 8; - op.height = 0; - op.charcount = 256; - op.data = up; - ret = con_font_op(vc, &op); - break; - } - - case GIO_FONT: { - op.op = KD_FONT_OP_GET; - op.flags = KD_FONT_FLAG_OLD; - op.width = 8; - op.height = 32; - op.charcount = 256; - op.data = up; - ret = con_font_op(vc, &op); - break; - } - case PIO_CMAP: if (!perm) ret = -EPERM; @@ -954,36 +888,6 @@ int vt_ioctl(struct tty_struct *tty, ret = con_get_cmap(up); break; - case PIO_FONTX: - case GIO_FONTX: - ret = do_fontx_ioctl(vc, cmd, up, perm, &op); - break; - - case PIO_FONTRESET: - { - if (!perm) - return -EPERM; - -#ifdef BROKEN_GRAPHICS_PROGRAMS - /* With BROKEN_GRAPHICS_PROGRAMS defined, the default - font is not saved. */ - ret = -ENOSYS; - break; -#else - { - op.op = KD_FONT_OP_SET_DEFAULT; - op.data = NULL; - ret = con_font_op(vc, &op); - if (ret) - break; - console_lock(); - con_set_default_unimap(vc); - console_unlock(); - break; - } -#endif - } - case KDFONTOP: { if (copy_from_user(&op, up, sizeof(op))) { ret = -EFAULT; @@ -1097,54 +1001,6 @@ void vc_SAK(struct work_struct *work) #ifdef CONFIG_COMPAT -struct compat_consolefontdesc { - unsigned short charcount; /* characters in font (256 or 512) */ - unsigned short charheight; /* scan lines per character (1-32) */ - compat_caddr_t chardata; /* font data in expanded form */ -}; - -static inline int -compat_fontx_ioctl(struct vc_data *vc, int cmd, - struct compat_consolefontdesc __user *user_cfd, - int perm, struct console_font_op *op) -{ - struct compat_consolefontdesc cfdarg; - int i; - - if (copy_from_user(&cfdarg, user_cfd, sizeof(struct compat_consolefontdesc))) - return -EFAULT; - - switch (cmd) { - case PIO_FONTX: - if (!perm) - return -EPERM; - op->op = KD_FONT_OP_SET; - op->flags = KD_FONT_FLAG_OLD; - op->width = 8; - op->height = cfdarg.charheight; - op->charcount = cfdarg.charcount; - op->data = compat_ptr(cfdarg.chardata); - return con_font_op(vc, op); - - case GIO_FONTX: - op->op = KD_FONT_OP_GET; - op->flags = KD_FONT_FLAG_OLD; - op->width = 8; - op->height = cfdarg.charheight; - op->charcount = cfdarg.charcount; - op->data = compat_ptr(cfdarg.chardata); - i = con_font_op(vc, op); - if (i) - return i; - cfdarg.charheight = op->height; - cfdarg.charcount = op->charcount; - if (copy_to_user(user_cfd, &cfdarg, sizeof(struct compat_consolefontdesc))) - return -EFAULT; - return 0; - } - return -EINVAL; -} - struct compat_console_font_op { compat_uint_t op; /* operation code KD_FONT_OP_* */ compat_uint_t flags; /* KD_FONT_FLAG_* */ @@ -1221,9 +1077,6 @@ long vt_compat_ioctl(struct tty_struct *tty, /* * these need special handlers for incompatible data structures */ - case PIO_FONTX: - case GIO_FONTX: - return compat_fontx_ioctl(vc, cmd, up, perm, &op); case KDFONTOP: return compat_kdfontop_ioctl(up, perm, &op, vc); diff --git a/include/linux/kd.h b/include/linux/kd.h deleted file mode 100644 index b130a18f860f..000000000000 --- a/include/linux/kd.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_KD_H -#define _LINUX_KD_H - -#include - -#define KD_FONT_FLAG_OLD 0x80000000 /* Invoked via old interface [compat] */ -#endif /* _LINUX_KD_H */ From 1df5178fdebe4e80c3c9d6b8ccabaf6fae9ea78b Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Thu, 16 Jun 2022 02:03:12 +0200 Subject: [PATCH 02/61] random: schedule mix_interrupt_randomness() less often commit 534d2eaf1970274150596fdd2bf552721e65d6b2 upstream. It used to be that mix_interrupt_randomness() would credit 1 bit each time it ran, and so add_interrupt_randomness() would schedule mix() to run every 64 interrupts, a fairly arbitrary number, but nonetheless considered to be a decent enough conservative estimate. Since e3e33fc2ea7f ("random: do not use input pool from hard IRQs"), mix() is now able to credit multiple bits, depending on the number of calls to add(). This was done for reasons separate from this commit, but it has the nice side effect of enabling this patch to schedule mix() less often. Currently the rules are: a) Credit 1 bit for every 64 calls to add(). b) Schedule mix() once a second that add() is called. c) Schedule mix() once every 64 calls to add(). Rules (a) and (c) no longer need to be coupled. It's still important to have _some_ value in (c), so that we don't "over-saturate" the fast pool, but the once per second we get from rule (b) is a plenty enough baseline. So, by increasing the 64 in rule (c) to something larger, we avoid calling queue_work_on() as frequently during irq storms. This commit changes that 64 in rule (c) to be 1024, which means we schedule mix() 16 times less often. And it does *not* need to change the 64 in rule (a). Fixes: 58340f8e952b ("random: defer fast pool mixing to worker") Cc: stable@vger.kernel.org Cc: Dominik Brodowski Acked-by: Sebastian Andrzej Siewior Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 82f9ee440406..ca5212fbe97f 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -996,7 +996,7 @@ void add_interrupt_randomness(int irq) if (new_count & MIX_INFLIGHT) return; - if (new_count < 64 && !time_is_before_jiffies(fast_pool->last + HZ)) + if (new_count < 1024 && !time_is_before_jiffies(fast_pool->last + HZ)) return; if (unlikely(!fast_pool->mix.func)) From eca9b5e36e249d9ff27d9c99019b9ccdaa4a0abb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 20 Jun 2022 12:40:08 +0200 Subject: [PATCH 03/61] ALSA: hda/via: Fix missing beep setup commit c7807b27d510e5aa53c8a120cfc02c33c24ebb5f upstream. Like the previous fix for Conexant codec, the beep_nid has to be set up before calling snd_hda_gen_parse_auto_config(); otherwise it'd miss the path setup. Fix the call order for addressing the missing beep setup. Fixes: 0e8f9862493a ("ALSA: hda/via - Simplify control management") Cc: Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152 Link: https://lore.kernel.org/r/20220620104008.1994-2-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_via.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index a5c1a2c4eae4..3edb4e25797d 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -520,11 +520,11 @@ static int via_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; - err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); + err = auto_parse_beep(codec); if (err < 0) return err; - err = auto_parse_beep(codec); + err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); if (err < 0) return err; From cf81f367cf81f4d72a479c7056a20bdab9b73acb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 20 Jun 2022 12:40:07 +0200 Subject: [PATCH 04/61] ALSA: hda/conexant: Fix missing beep setup commit 5faa0bc69102f3a4c605581564c367be5eb94dfa upstream. Currently the Conexant codec driver sets up the beep NID after calling snd_hda_gen_parse_auto_config(). It turned out that this results in the insufficient setup for the beep control, as the generic parser handles the fake path in snd_hda_gen_parse_auto_config() only if the beep_nid is set up beforehand. For dealing with the beep widget properly, call cx_auto_parse_beep() before snd_hda_gen_parse_auto_config() call. Fixes: 51e19ca5f755 ("ALSA: hda/conexant - Clean up beep code") Cc: Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152 Link: https://lore.kernel.org/r/20220620104008.1994-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_conexant.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index c0b6881b0672..b81b0a1bada5 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1048,11 +1048,11 @@ static int patch_conexant_auto(struct hda_codec *codec) if (err < 0) goto error; - err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); + err = cx_auto_parse_beep(codec); if (err < 0) goto error; - err = cx_auto_parse_beep(codec); + err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); if (err < 0) goto error; From 5fbad99e76c0e7af8a2ab2378bdb621615210f8d Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Mon, 13 Jun 2022 14:57:19 +0800 Subject: [PATCH 05/61] ALSA: hda/realtek - ALC897 headset MIC no sound commit fe6900bd8156467365bd5b976df64928fdebfeb0 upstream. There is not have Headset Mic verb table in BIOS default. So, it will have recording issue from headset MIC. Add the verb table value without jack detect. It will turn on Headset Mic. Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/719133a27d8844a890002cb817001dfa@realtek.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8c37de779346..58d636bfac05 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9805,6 +9805,7 @@ enum { ALC668_FIXUP_MIC_DET_COEF, ALC897_FIXUP_LENOVO_HEADSET_MIC, ALC897_FIXUP_HEADSET_MIC_PIN, + ALC897_FIXUP_HP_HSMIC_VERB, }; static const struct hda_fixup alc662_fixups[] = { @@ -10224,6 +10225,13 @@ static const struct hda_fixup alc662_fixups[] = { .chained = true, .chain_id = ALC897_FIXUP_LENOVO_HEADSET_MIC }, + [ALC897_FIXUP_HP_HSMIC_VERB] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + }, }; static const struct snd_pci_quirk alc662_fixup_tbl[] = { @@ -10249,6 +10257,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0698, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), + SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB), SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE), From 6fda65dabd3e5658ad0a94fcc00021c1b9ba4ba6 Mon Sep 17 00:00:00 2001 From: Tim Crawford Date: Fri, 17 Jun 2022 07:30:28 -0600 Subject: [PATCH 06/61] ALSA: hda/realtek: Add quirk for Clevo PD70PNT commit d49951219b0249d3eff49e4f02e0de82357bc8a0 upstream. Fixes speaker output and headset detection on Clevo PD70PNT. Signed-off-by: Tim Crawford Cc: Link: https://lore.kernel.org/r/20220617133028.50568-1-tcrawford@system76.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 58d636bfac05..804fc0d331b4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2585,6 +2585,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x67f1, "Clevo PC70H[PRS]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), + SND_PCI_QUIRK(0x1558, 0x67f5, "Clevo PD70PN[NRT]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x70d1, "Clevo PC70[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x7714, "Clevo X170SM", ALC1220_FIXUP_CLEVO_PB51ED_PINS), SND_PCI_QUIRK(0x1558, 0x7715, "Clevo X170KM-G", ALC1220_FIXUP_CLEVO_PB51ED), From af28f602df7449f88b0cda05aacc7533fb64f641 Mon Sep 17 00:00:00 2001 From: Rosemarie O'Riorden Date: Tue, 21 Jun 2022 16:48:45 -0400 Subject: [PATCH 07/61] net: openvswitch: fix parsing of nw_proto for IPv6 fragments commit 12378a5a75e33f34f8586706eb61cca9e6d4690c upstream. When a packet enters the OVS datapath and does not match any existing flows installed in the kernel flow cache, the packet will be sent to userspace to be parsed, and a new flow will be created. The kernel and OVS rely on each other to parse packet fields in the same way so that packets will be handled properly. As per the design document linked below, OVS expects all later IPv6 fragments to have nw_proto=44 in the flow key, so they can be correctly matched on OpenFlow rules. OpenFlow controllers create pipelines based on this design. This behavior was changed by the commit in the Fixes tag so that nw_proto equals the next_header field of the last extension header. However, there is no counterpart for this change in OVS userspace, meaning that this field is parsed differently between OVS and the kernel. This is a problem because OVS creates actions based on what is parsed in userspace, but the kernel-provided flow key is used as a match criteria, as described in Documentation/networking/openvswitch.rst. This leads to issues such as packets incorrectly matching on a flow and thus the wrong list of actions being applied to the packet. Such changes in packet parsing cannot be implemented without breaking the userspace. The offending commit is partially reverted to restore the expected behavior. The change technically made sense and there is a good reason that it was implemented, but it does not comply with the original design of OVS. If in the future someone wants to implement such a change, then it must be user-configurable and disabled by default to preserve backwards compatibility with existing OVS versions. Cc: stable@vger.kernel.org Fixes: fa642f08839b ("openvswitch: Derive IP protocol number for IPv6 later frags") Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments Signed-off-by: Rosemarie O'Riorden Acked-by: Eelco Chaudron Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman --- net/openvswitch/flow.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c index 38147e6a20f5..989175ce81d4 100644 --- a/net/openvswitch/flow.c +++ b/net/openvswitch/flow.c @@ -265,7 +265,7 @@ static int parse_ipv6hdr(struct sk_buff *skb, struct sw_flow_key *key) if (flags & IP6_FH_F_FRAG) { if (frag_off) { key->ip.frag = OVS_FRAG_TYPE_LATER; - key->ip.proto = nexthdr; + key->ip.proto = NEXTHDR_FRAGMENT; return 0; } key->ip.frag = OVS_FRAG_TYPE_FIRST; From c8d37e6ca180d88493e204c4fc2633e7998556ac Mon Sep 17 00:00:00 2001 From: Chevron Li Date: Thu, 2 Jun 2022 06:25:43 -0700 Subject: [PATCH 08/61] mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing commit e591fcf6b4e39335c9b128b17738fcd2fdd278ae upstream. The result from ->get_cd() may be incorrect as the card detect debouncing isn't managed correctly. Let's fix it. Signed-off-by: Chevron Li Fixes: 7d44061704dd ("mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220602132543.596-1-chevron.li@bayhubtech.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-pci-o2micro.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c index 41a2394313dd..3170c19683c4 100644 --- a/drivers/mmc/host/sdhci-pci-o2micro.c +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -145,6 +145,8 @@ static int sdhci_o2_get_cd(struct mmc_host *mmc) if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS)) sdhci_o2_enable_internal_clock(host); + else + sdhci_o2_wait_card_detect_stable(host); return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); } From 71c76f56b97c15d367f0855bbf2127029bdabecc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 14 Jun 2022 10:31:38 +0200 Subject: [PATCH 09/61] mtd: rawnand: gpmi: Fix setting busy timeout setting commit 06781a5026350cde699d2d10c9914a25c1524f45 upstream. The DEVICE_BUSY_TIMEOUT value is described in the Reference Manual as: | Timeout waiting for NAND Ready/Busy or ATA IRQ. Used in WAIT_FOR_READY | mode. This value is the number of GPMI_CLK cycles multiplied by 4096. So instead of multiplying the value in cycles with 4096, we have to divide it by that value. Use DIV_ROUND_UP to make sure we are on the safe side, especially when the calculated value in cycles is smaller than 4096 as typically the case. This bug likely never triggered because any timeout != 0 usually will do. In my case the busy timeout in cycles was originally calculated as 2408, which multiplied with 4096 is 0x968000. The lower 16 bits were taken for the 16 bit wide register field, so the register value was 0x8000. With 2970bf5a32f0 ("mtd: rawnand: gpmi: fix controller timings setting") however the value in cycles became 2384, which multiplied with 4096 is 0x950000. The lower 16 bit are 0x0 now resulting in an intermediate timeout when reading from NAND. Fixes: b1206122069aa ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220614083138.3455683-1-s.hauer@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 02218c3b548f..41f7dd58bdcf 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -682,7 +682,7 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this, hw->timing0 = BF_GPMI_TIMING0_ADDRESS_SETUP(addr_setup_cycles) | BF_GPMI_TIMING0_DATA_HOLD(data_hold_cycles) | BF_GPMI_TIMING0_DATA_SETUP(data_setup_cycles); - hw->timing1 = BF_GPMI_TIMING1_BUSY_TIMEOUT(busy_timeout_cycles * 4096); + hw->timing1 = BF_GPMI_TIMING1_BUSY_TIMEOUT(DIV_ROUND_UP(busy_timeout_cycles, 4096)); /* * Derive NFC ideal delay from {3}: From 0e75acbe1b7683026cdbcd1a95107ba42eb3cfbb Mon Sep 17 00:00:00 2001 From: Edward Wu Date: Fri, 17 Jun 2022 11:32:20 +0800 Subject: [PATCH 10/61] ata: libata: add qc->flags in ata_qc_complete_template tracepoint commit 540a92bfe6dab7310b9df2e488ba247d784d0163 upstream. Add flags value to check the result of ata completion Fixes: 255c03d15a29 ("libata: Add tracepoints") Cc: stable@vger.kernel.org Signed-off-by: Edward Wu Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman --- include/trace/events/libata.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/trace/events/libata.h b/include/trace/events/libata.h index ab69434e2329..72e785a903b6 100644 --- a/include/trace/events/libata.h +++ b/include/trace/events/libata.h @@ -249,6 +249,7 @@ DECLARE_EVENT_CLASS(ata_qc_complete_template, __entry->hob_feature = qc->result_tf.hob_feature; __entry->nsect = qc->result_tf.nsect; __entry->hob_nsect = qc->result_tf.hob_nsect; + __entry->flags = qc->flags; ), TP_printk("ata_port=%u ata_dev=%u tag=%d flags=%s status=%s " \ From 1f350f3cf0c135c479a79899ee96c1cda8b669bd Mon Sep 17 00:00:00 2001 From: Nikos Tsironis Date: Tue, 21 Jun 2022 15:24:03 +0300 Subject: [PATCH 11/61] dm era: commit metadata in postsuspend after worker stops commit 9ae6e8b1c9bbf6874163d1243e393137313762b7 upstream. During postsuspend dm-era does the following: 1. Archives the current era 2. Commits the metadata, as part of the RPC call for archiving the current era 3. Stops the worker Until the worker stops, it might write to the metadata again. Moreover, these writes are not flushed to disk immediately, but are cached by the dm-bufio client, which writes them back asynchronously. As a result, the committed metadata of a suspended dm-era device might not be consistent with the in-core metadata. In some cases, this can result in the corruption of the on-disk metadata. Suppose the following sequence of events: 1. Load a new table, e.g. a snapshot-origin table, to a device with a dm-era table 2. Suspend the device 3. dm-era commits its metadata, but the worker does a few more metadata writes until it stops, as part of digesting an archived writeset 4. These writes are cached by the dm-bufio client 5. Load the dm-era table to another device. 6. The new instance of the dm-era target loads the committed, on-disk metadata, which don't include the extra writes done by the worker after the metadata commit. 7. Resume the new device 8. The new dm-era target instance starts using the metadata 9. Resume the original device 10. The destructor of the old dm-era target instance is called and destroys the dm-bufio client, which results in flushing the cached writes to disk 11. These writes might overwrite the writes done by the new dm-era instance, hence corrupting its metadata. Fix this by committing the metadata after the worker stops running. stop_worker uses flush_workqueue to flush the current work. However, the work item may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. This could result in the worker changing the metadata after they have been committed, or writing to the metadata concurrently with the commit in the postsuspend thread. Use drain_workqueue instead, which waits until the work and all re-queued works finish. Fixes: eec40579d8487 ("dm: add era target") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Nikos Tsironis Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-era-target.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-era-target.c b/drivers/md/dm-era-target.c index 6b0b3a13ab4a..418f590b99b8 100644 --- a/drivers/md/dm-era-target.c +++ b/drivers/md/dm-era-target.c @@ -1397,7 +1397,7 @@ static void start_worker(struct era *era) static void stop_worker(struct era *era) { atomic_set(&era->suspended, 1); - flush_workqueue(era->wq); + drain_workqueue(era->wq); } /*---------------------------------------------------------------- @@ -1581,6 +1581,12 @@ static void era_postsuspend(struct dm_target *ti) } stop_worker(era); + + r = metadata_commit(era->md); + if (r) { + DMERR("%s: metadata_commit failed", __func__); + /* FIXME: fail mode */ + } } static int era_preresume(struct dm_target *ti) From 06a24ddba93aa0ceabf05cd91f679ba5d20d4cbd Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 23 Jun 2022 14:53:25 -0400 Subject: [PATCH 12/61] dm mirror log: clear log bits up to BITS_PER_LONG boundary commit 90736eb3232d208ee048493f371075e4272e0944 upstream. Commit 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG") introduced a regression on 64-bit architectures in the lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation. If the device is shrunk, we need to clear log bits beyond the end of the device. The code clears bits up to a 32-bit boundary and then calculates lc->sync_count by summing set bits up to a 64-bit boundary (the commit changed that; previously, this boundary was 32-bit too). So, it was using some non-zeroed bits in the calculation and this caused misbehavior. Fix this regression by clearing bits up to BITS_PER_LONG boundary. Fixes: 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG") Cc: stable@vger.kernel.org Reported-by: Benjamin Marzinski Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 8b15f53cbdd9..fe3a9473f338 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -615,7 +615,7 @@ static int disk_resume(struct dm_dirty_log *log) log_clear_bit(lc, lc->clean_bits, i); /* clear any old bits -- device has shrunk */ - for (i = lc->region_count; i % (sizeof(*lc->clean_bits) << BYTE_SHIFT); i++) + for (i = lc->region_count; i % BITS_PER_LONG; i++) log_clear_bit(lc, lc->clean_bits, i); /* copy clean across to sync */ From ae183969bd66d0e05a7a7f3803859345d561f291 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Thu, 16 Jun 2022 15:00:51 +0200 Subject: [PATCH 13/61] random: quiet urandom warning ratelimit suppression message commit c01d4d0a82b71857be7449380338bc53dde2da92 upstream. random.c ratelimits how much it warns about uninitialized urandom reads using __ratelimit(). When the RNG is finally initialized, it prints the number of missed messages due to ratelimiting. It has been this way since that functionality was introduced back in 2018. Recently, cc1e127bfa95 ("random: remove ratelimiting for in-kernel unseeded randomness") put a bit more stress on the urandom ratelimiting, which teased out a bug in the implementation. Specifically, when under pressure, __ratelimit() will print its own message and reset the count back to 0, making the final message at the end less useful. Secondly, it does so as a pr_warn(), which apparently is undesirable for people's CI. Fortunately, __ratelimit() has the RATELIMIT_MSG_ON_RELEASE flag exactly for this purpose, so we set the flag. Fixes: 4e00b339e264 ("random: rate limit unseeded randomness warnings") Cc: stable@vger.kernel.org Reported-by: Jon Hunter Reported-by: Ron Economos Tested-by: Ron Economos Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman --- drivers/char/random.c | 2 +- include/linux/ratelimit.h | 12 ++++++++---- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index ca5212fbe97f..b86bee9284fa 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -88,7 +88,7 @@ static RAW_NOTIFIER_HEAD(random_ready_chain); /* Control how we warn userspace. */ static struct ratelimit_state urandom_warning = - RATELIMIT_STATE_INIT("warn_urandom_randomness", HZ, 3); + RATELIMIT_STATE_INIT_FLAGS("urandom_warning", HZ, 3, RATELIMIT_MSG_ON_RELEASE); static int ratelimit_disable __read_mostly = IS_ENABLED(CONFIG_WARN_ALL_UNSEEDED_RANDOM); module_param_named(ratelimit_disable, ratelimit_disable, int, 0644); diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index 8ddf79e9207a..1df12e8dde6f 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -23,12 +23,16 @@ struct ratelimit_state { unsigned long flags; }; -#define RATELIMIT_STATE_INIT(name, interval_init, burst_init) { \ - .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \ - .interval = interval_init, \ - .burst = burst_init, \ +#define RATELIMIT_STATE_INIT_FLAGS(name, interval_init, burst_init, flags_init) { \ + .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \ + .interval = interval_init, \ + .burst = burst_init, \ + .flags = flags_init, \ } +#define RATELIMIT_STATE_INIT(name, interval_init, burst_init) \ + RATELIMIT_STATE_INIT_FLAGS(name, interval_init, burst_init, 0) + #define RATELIMIT_STATE_INIT_DISABLED \ RATELIMIT_STATE_INIT(ratelimit_state, 0, DEFAULT_RATELIMIT_BURST) From 613c849d73df60b54fd1542fd9cb6cd667925ba3 Mon Sep 17 00:00:00 2001 From: Carlo Lobrano Date: Tue, 14 Jun 2022 09:56:23 +0200 Subject: [PATCH 14/61] USB: serial: option: add Telit LE910Cx 0x1250 composition commit 342fc0c3b345525da21112bd0478a0dc741598ea upstream. Add support for the following Telit LE910Cx composition: 0x1250: rmnet, tty, tty, tty, tty Reviewed-by: Daniele Palmas Signed-off-by: Carlo Lobrano Link: https://lore.kernel.org/r/20220614075623.2392607-1-c.lobrano@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ec4fdb814091..cd7d08e50d70 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1279,6 +1279,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1231, 0xff), /* Telit LE910Cx (RNDIS) */ .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x1250, 0xff, 0x00, 0x00) }, /* Telit LE910Cx (rmnet) */ { USB_DEVICE(TELIT_VENDOR_ID, 0x1260), .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE(TELIT_VENDOR_ID, 0x1261), From ea7b23eadebca52f149395686646741809138407 Mon Sep 17 00:00:00 2001 From: Yonglin Tan Date: Tue, 21 Jun 2022 20:37:53 +0800 Subject: [PATCH 15/61] USB: serial: option: add Quectel EM05-G modem commit 33b29dbb39bcbd0a96e440646396bbf670b914fa upstream. The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index cd7d08e50d70..2f8c04d2d7e6 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -252,6 +252,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 +#define QUECTEL_PRODUCT_EM05G 0x030a #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 @@ -1134,6 +1135,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, From f074ab2539887d051717b1495cffdd277ca9394c Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Thu, 23 Jun 2022 16:56:44 +0800 Subject: [PATCH 16/61] USB: serial: option: add Quectel RM500K module support commit 15b694e96c31807d8515aacfa687a1e8a4fbbadc upstream. Add usb product id of the Quectel RM500K module. RM500K provides 2 mandatory interfaces to Linux host after enumeration. - /dev/ttyUSB5: this is a serial interface for control path. User needs to write AT commands to this device node to query status, set APN, set PIN code, and enable/disable the data connection to 5G network. - ethX: this is the data path provided as a RNDIS devices. After the data connection has been established, Linux host can access 5G data network via this interface. "RNDIS": RNDIS + ADB + AT (/dev/ttyUSB5) + MODEM COMs usb-devices output for 0x7001: T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=7001 Rev=00.01 S: Manufacturer=MediaTek Inc. S: Product=USB DATA CARD S: SerialNumber=869206050009672 C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by: Ballon Shi Signed-off-by: Ballon Shi Signed-off-by: Macpaul Lin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2f8c04d2d7e6..2317ed357d8e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -257,6 +257,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 +#define QUECTEL_PRODUCT_RM500K 0x7001 #define CMOTECH_VENDOR_ID 0x16d8 #define CMOTECH_PRODUCT_6001 0x6001 @@ -1150,6 +1151,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, From 8ffe2e50e9678c8373027492035f094b130437f1 Mon Sep 17 00:00:00 2001 From: Jon Maxwell Date: Wed, 15 Jun 2022 11:15:40 +1000 Subject: [PATCH 17/61] bpf: Fix request_sock leak in sk lookup helpers [ Upstream commit 3046a827316c0e55fc563b4fb78c93b9ca5c7c37 ] A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction. Fixes: f7355a6c0497 ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()") Fixes: edbf8c01de5a ("bpf: add skc_lookup_tcp helper") Co-developed-by: Antoine Tenart Signed-off-by: Antoine Tenart Signed-off-by: Jon Maxwell Signed-off-by: Daniel Borkmann Tested-by: Curtis Taylor Cc: Martin KaFai Lau Link: https://lore.kernel.org/bpf/56d6f898-bde0-bb25-3427-12a330b29fb8@iogearbox.net Link: https://lore.kernel.org/bpf/20220615011540.813025-1-jmaxwell37@gmail.com Signed-off-by: Sasha Levin --- net/core/filter.c | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index b0df4ddbe30c..eba96343c7af 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -5313,10 +5313,21 @@ __bpf_sk_lookup(struct sk_buff *skb, struct bpf_sock_tuple *tuple, u32 len, ifindex, proto, netns_id, flags); if (sk) { - sk = sk_to_full_sk(sk); - if (!sk_fullsock(sk)) { + struct sock *sk2 = sk_to_full_sk(sk); + + /* sk_to_full_sk() may return (sk)->rsk_listener, so make sure the original sk + * sock refcnt is decremented to prevent a request_sock leak. + */ + if (!sk_fullsock(sk2)) + sk2 = NULL; + if (sk2 != sk) { sock_gen_put(sk); - return NULL; + /* Ensure there is no need to bump sk2 refcnt */ + if (unlikely(sk2 && !sock_flag(sk2, SOCK_RCU_FREE))) { + WARN_ONCE(1, "Found non-RCU, unreferenced socket!"); + return NULL; + } + sk = sk2; } } @@ -5350,10 +5361,21 @@ bpf_sk_lookup(struct sk_buff *skb, struct bpf_sock_tuple *tuple, u32 len, flags); if (sk) { - sk = sk_to_full_sk(sk); - if (!sk_fullsock(sk)) { + struct sock *sk2 = sk_to_full_sk(sk); + + /* sk_to_full_sk() may return (sk)->rsk_listener, so make sure the original sk + * sock refcnt is decremented to prevent a request_sock leak. + */ + if (!sk_fullsock(sk2)) + sk2 = NULL; + if (sk2 != sk) { sock_gen_put(sk); - return NULL; + /* Ensure there is no need to bump sk2 refcnt */ + if (unlikely(sk2 && !sock_flag(sk2, SOCK_RCU_FREE))) { + WARN_ONCE(1, "Found non-RCU, unreferenced socket!"); + return NULL; + } + sk = sk2; } } From 104a59b74577cfb4be0964452573f39bc1b9d998 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Fri, 10 Jun 2022 11:40:37 +0300 Subject: [PATCH 18/61] phy: aquantia: Fix AN when higher speeds than 1G are not advertised [ Upstream commit 9b7fd1670a94a57d974795acebde843a5c1a354e ] Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by: Claudiu Manoil Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/phy/aquantia_main.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c index 975789d9349d..75d8351ee250 100644 --- a/drivers/net/phy/aquantia_main.c +++ b/drivers/net/phy/aquantia_main.c @@ -34,6 +34,8 @@ #define MDIO_AN_VEND_PROV 0xc400 #define MDIO_AN_VEND_PROV_1000BASET_FULL BIT(15) #define MDIO_AN_VEND_PROV_1000BASET_HALF BIT(14) +#define MDIO_AN_VEND_PROV_5000BASET_FULL BIT(11) +#define MDIO_AN_VEND_PROV_2500BASET_FULL BIT(10) #define MDIO_AN_VEND_PROV_DOWNSHIFT_EN BIT(4) #define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK GENMASK(3, 0) #define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT 4 @@ -230,9 +232,20 @@ static int aqr_config_aneg(struct phy_device *phydev) phydev->advertising)) reg |= MDIO_AN_VEND_PROV_1000BASET_HALF; + /* Handle the case when the 2.5G and 5G speeds are not advertised */ + if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->advertising)) + reg |= MDIO_AN_VEND_PROV_2500BASET_FULL; + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + phydev->advertising)) + reg |= MDIO_AN_VEND_PROV_5000BASET_FULL; + ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV, MDIO_AN_VEND_PROV_1000BASET_HALF | - MDIO_AN_VEND_PROV_1000BASET_FULL, reg); + MDIO_AN_VEND_PROV_1000BASET_FULL | + MDIO_AN_VEND_PROV_2500BASET_FULL | + MDIO_AN_VEND_PROV_5000BASET_FULL, reg); if (ret < 0) return ret; if (ret > 0) From 47d31b97bf47853093afe325986d3415c0c271b5 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Thu, 16 Jun 2022 12:32:40 -0700 Subject: [PATCH 19/61] bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers [ Upstream commit 7a9214f3d88cfdb099f3896e102a306b316d8707 ] The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by: Jonathan Toppins Signed-off-by: Jay Vosburgh Fixes: b0929915e035 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/ Tested-by: Jonathan Toppins Reviewed-by: Jonathan Toppins Link: https://lore.kernel.org/r/9400.1655407960@famine Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/bonding/bond_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d6ecd03b6045..246bcbd650b4 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3071,9 +3071,11 @@ re_arm: if (!rtnl_trylock()) return; - if (should_notify_peers) + if (should_notify_peers) { + bond->send_peer_notif--; call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev); + } if (should_notify_rtnl) { bond_slave_state_notify(bond); bond_slave_link_notify(bond); From f1f9c2a5a3d98b2f14ac73e360d8c54b991d2f9d Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Thu, 16 Jun 2022 16:43:36 -0700 Subject: [PATCH 20/61] net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms [ Upstream commit a2b1a5d40bd12b44322c2ccd40bb0ec1699708b6 ] As reported by Yuming, currently tc always show a latency of UINT_MAX for netem Qdisc's on 32-bit platforms: $ tc qdisc add dev dummy0 root netem latency 100ms $ tc qdisc show dev dummy0 qdisc netem 8001: root refcnt 2 limit 1000 delay 275s 275s ^^^^^^^^^^^^^^^^ Let us take a closer look at netem_dump(): qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency, UINT_MAX); qopt.latency is __u32, psched_tdiff_t is signed long, (psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so qopt.latency is always UINT_MAX. Fix it by using psched_time_t (u64) instead. Note: confusingly, users have two ways to specify 'latency': 1. normally, via '__u32 latency' in struct tc_netem_qopt; 2. via the TCA_NETEM_LATENCY64 attribute, which is s64. For the second case, theoretically 'latency' could be negative. This patch ignores that corner case, since it is broken (i.e. assigning a negative s64 to __u32) anyways, and should be handled separately. Thanks Ted Lin for the analysis [1] . [1] https://github.com/raspberrypi/linux/issues/3512 Reported-by: Yuming Chen Fixes: 112f9cb65643 ("netem: convert to qdisc_watchdog_schedule_ns") Reviewed-by: Cong Wang Signed-off-by: Peilin Ye Acked-by: Stephen Hemminger Link: https://lore.kernel.org/r/20220616234336.2443-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/sched/sch_netem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index f4101a920d1f..1802f134aa40 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -1146,9 +1146,9 @@ static int netem_dump(struct Qdisc *sch, struct sk_buff *skb) struct tc_netem_rate rate; struct tc_netem_slot slot; - qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency), + qopt.latency = min_t(psched_time_t, PSCHED_NS2TICKS(q->latency), UINT_MAX); - qopt.jitter = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->jitter), + qopt.jitter = min_t(psched_time_t, PSCHED_NS2TICKS(q->jitter), UINT_MAX); qopt.limit = q->limit; qopt.loss = q->loss; From d1592d3e362cc59b29f15019707b16c695d70ca3 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Tue, 7 Jun 2022 15:08:38 +0400 Subject: [PATCH 21/61] drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf [ Upstream commit b9cc4598607cb7f7eae5c75fc1e3209cd52ff5e0 ] of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by: Miaoqian Lin Reviewed-by: Dmitry Baryshkov Reviewed-by: Stephen Boyd Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/488473/ Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com Signed-off-by: Rob Clark Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c index 4f0c6d58e06f..f0a5767b69f5 100644 --- a/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c +++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c @@ -245,6 +245,7 @@ static int mdp4_modeset_init_intf(struct mdp4_kms *mdp4_kms, encoder = mdp4_lcdc_encoder_init(dev, panel_node); if (IS_ERR(encoder)) { DRM_DEV_ERROR(dev->dev, "failed to construct LCDC encoder\n"); + of_node_put(panel_node); return PTR_ERR(encoder); } @@ -254,6 +255,7 @@ static int mdp4_modeset_init_intf(struct mdp4_kms *mdp4_kms, connector = mdp4_lvds_connector_init(dev, panel_node, encoder); if (IS_ERR(connector)) { DRM_DEV_ERROR(dev->dev, "failed to initialize LVDS connector\n"); + of_node_put(panel_node); return PTR_ERR(connector); } From 02da602bc2f353dccd9e489a604490034ded941e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 20 Jun 2022 01:35:06 -0700 Subject: [PATCH 22/61] erspan: do not assume transport header is always set [ Upstream commit 301bd140ed0b24f0da660874c7e8a47dad8c8222 ] Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 Fixes: d5db21a3e697 ("erspan: auto detect truncated ipv6 packets.") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: William Tu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ipv4/ip_gre.c | 15 ++++++++++----- net/ipv6/ip6_gre.c | 15 ++++++++++----- 2 files changed, 20 insertions(+), 10 deletions(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 614410a6db44..52dbffb7bc2f 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -497,7 +497,6 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev) int tunnel_hlen; int version; int nhoff; - int thoff; tun_info = skb_tunnel_info(skb); if (unlikely(!tun_info || !(tun_info->mode & IP_TUNNEL_INFO_TX) || @@ -531,10 +530,16 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev) (ntohs(ip_hdr(skb)->tot_len) > skb->len - nhoff)) truncate = true; - thoff = skb_transport_header(skb) - skb_mac_header(skb); - if (skb->protocol == htons(ETH_P_IPV6) && - (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff)) - truncate = true; + if (skb->protocol == htons(ETH_P_IPV6)) { + int thoff; + + if (skb_transport_header_was_set(skb)) + thoff = skb_transport_header(skb) - skb_mac_header(skb); + else + thoff = nhoff + sizeof(struct ipv6hdr); + if (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff) + truncate = true; + } if (version == 1) { erspan_build_header(skb, ntohl(tunnel_id_to_key32(key->tun_id)), diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index e550db28aabb..4a6396d574a0 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -927,7 +927,6 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, __be16 proto; __u32 mtu; int nhoff; - int thoff; if (!pskb_inet_may_pull(skb)) goto tx_err; @@ -948,10 +947,16 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, (ntohs(ip_hdr(skb)->tot_len) > skb->len - nhoff)) truncate = true; - thoff = skb_transport_header(skb) - skb_mac_header(skb); - if (skb->protocol == htons(ETH_P_IPV6) && - (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff)) - truncate = true; + if (skb->protocol == htons(ETH_P_IPV6)) { + int thoff; + + if (skb_transport_header_was_set(skb)) + thoff = skb_transport_header(skb) - skb_mac_header(skb); + else + thoff = nhoff + sizeof(struct ipv6hdr); + if (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff) + truncate = true; + } if (skb_cow_head(skb, dev->needed_headroom ?: t->hlen)) goto tx_err; From 05c6c36c79311d9a00a79f88647f83a7cf009624 Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Mon, 20 Jun 2022 12:35:08 +0800 Subject: [PATCH 23/61] net/tls: fix tls_sk_proto_close executed repeatedly [ Upstream commit 69135c572d1f84261a6de2a1268513a7e71753e2 ] After setting the sock ktls, update ctx->sk_proto to sock->sk_prot by tls_update(), so now ctx->sk_proto->close is tls_sk_proto_close(). When close the sock, tls_sk_proto_close() is called for sock->sk_prot->close is tls_sk_proto_close(). But ctx->sk_proto->close() will be executed later in tls_sk_proto_close(). Thus tls_sk_proto_close() executed repeatedly occurred. That will trigger the following bug. ================================================================= KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:tls_sk_proto_close+0xd8/0xaf0 net/tls/tls_main.c:306 Call Trace: tls_sk_proto_close+0x356/0xaf0 net/tls/tls_main.c:329 inet_release+0x12e/0x280 net/ipv4/af_inet.c:428 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x18/0x20 net/socket.c:1365 Updating a proto which is same with sock->sk_prot is incorrect. Add proto and sock->sk_prot equality check at the head of tls_update() to fix it. Fixes: 95fa145479fb ("bpf: sockmap/tls, close can race with map free") Reported-by: syzbot+29c3c12f3214b85ad081@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/tls/tls_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 7aba4ee77aba..df9177d96f7f 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -803,6 +803,9 @@ static void tls_update(struct sock *sk, struct proto *p, { struct tls_context *ctx; + if (sk->sk_prot == p) + return; + ctx = tls_get_ctx(sk); if (likely(ctx)) { ctx->sk_write_space = write_space; From c7bdaad9cbfe17c83e4f56c7bb7a2d87d944f0fb Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Mon, 20 Jun 2022 09:15:47 +0200 Subject: [PATCH 24/61] udmabuf: add back sanity check [ Upstream commit 05b252cccb2e5c3f56119d25de684b4f810ba40a ] Check vm_fault->pgoff before using it. When we removed the warning, we also removed the check. Fixes: 7b26e4e2119d ("udmabuf: drop WARN_ON() check.") Reported-by: zdi-disclosures@trendmicro.com Suggested-by: Linus Torvalds Signed-off-by: Gerd Hoffmann Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- drivers/dma-buf/udmabuf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c index e553c6a937f6..c6e9b7bd7618 100644 --- a/drivers/dma-buf/udmabuf.c +++ b/drivers/dma-buf/udmabuf.c @@ -24,8 +24,11 @@ static vm_fault_t udmabuf_vm_fault(struct vm_fault *vmf) { struct vm_area_struct *vma = vmf->vma; struct udmabuf *ubuf = vma->vm_private_data; + pgoff_t pgoff = vmf->pgoff; - vmf->page = ubuf->pages[vmf->pgoff]; + if (pgoff >= ubuf->pagecount) + return VM_FAULT_SIGBUS; + vmf->page = ubuf->pages[pgoff]; get_page(vmf->page); return 0; } From 788c954f194c6b32ade948c7bf4748dc7470771a Mon Sep 17 00:00:00 2001 From: Julien Grall Date: Fri, 17 Jun 2022 11:30:37 +0100 Subject: [PATCH 25/61] x86/xen: Remove undefined behavior in setup_features() [ Upstream commit ecb6237fa397b7b810d798ad19322eca466dbab1 ] 1 << 31 is undefined. So switch to 1U << 31. Fixes: 5ead97c84fa7 ("xen: Core Xen implementation") Signed-off-by: Julien Grall Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/20220617103037.57828-1-julien@xen.org Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin --- drivers/xen/features.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/features.c b/drivers/xen/features.c index 25c053b09605..2c306de228db 100644 --- a/drivers/xen/features.c +++ b/drivers/xen/features.c @@ -29,6 +29,6 @@ void xen_setup_features(void) if (HYPERVISOR_xen_version(XENVER_get_features, &fi) < 0) break; for (j = 0; j < 32; j++) - xen_features[i * 32 + j] = !!(fi.submap & 1< Date: Fri, 10 Jun 2022 19:14:20 +0800 Subject: [PATCH 26/61] MIPS: Remove repetitive increase irq_err_count [ Upstream commit c81aba8fde2aee4f5778ebab3a1d51bd2ef48e4c ] commit 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed. And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined! So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback. Fixes: 27fdd325dace ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by: k2ci Signed-off-by: huhai Signed-off-by: Genjian Zhang Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/vr41xx/common/icu.c | 2 -- drivers/gpio/gpio-vr41xx.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index 7b7f25b4b057..9240bcdbe74e 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -640,8 +640,6 @@ static int icu_get_irq(unsigned int irq) printk(KERN_ERR "spurious ICU interrupt: %04x,%04x\n", pend1, pend2); - atomic_inc(&irq_err_count); - return -1; } diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c index 98cd715ccc33..8d09b619c166 100644 --- a/drivers/gpio/gpio-vr41xx.c +++ b/drivers/gpio/gpio-vr41xx.c @@ -217,8 +217,6 @@ static int giu_get_irq(unsigned int irq) printk(KERN_ERR "spurious GIU interrupt: %04x(%04x),%04x(%04x)\n", maskl, pendl, maskh, pendh); - atomic_inc(&irq_err_count); - return -EINVAL; } From e3a232e5767051483ffad4cef7d0a89d292a192b Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Jun 2022 15:59:57 +0100 Subject: [PATCH 27/61] afs: Fix dynamic root getattr [ Upstream commit cb78d1b5efffe4cf97e16766329dd7358aed3deb ] The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62 Fixes: 2aeb8c86d499 ("afs: Fix afs_getattr() to refetch file status if callback break occurred") Reported-by: Marc Dionne Signed-off-by: David Howells Reviewed-by: Marc Dionne Tested-by: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- fs/afs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 90eac3ec01cb..622363af4c1b 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -739,7 +739,8 @@ int afs_getattr(const struct path *path, struct kstat *stat, _enter("{ ino=%lu v=%u }", inode->i_ino, inode->i_generation); - if (!(query_flags & AT_STATX_DONT_SYNC) && + if (vnode->volume && + !(query_flags & AT_STATX_DONT_SYNC) && !test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) { key = afs_request_key(vnode->volume->cell); if (IS_ERR(key)) From 844168a5dabf7453c9f2cb08f18564d4cdb8009f Mon Sep 17 00:00:00 2001 From: Anatolii Gerasymenko Date: Mon, 20 Jun 2022 09:47:05 +0200 Subject: [PATCH 28/61] ice: ethtool: advertise 1000M speeds properly [ Upstream commit c3d184c83ff4b80167e34edfc3d21df424bf27ff ] In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Anatolii Gerasymenko Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/ice/ice_ethtool.c | 39 +++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index fc9ff985a62b..b297a3ca22fc 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -2337,6 +2337,42 @@ ice_setup_autoneg(struct ice_port_info *p, struct ethtool_link_ksettings *ks, return err; } +/** + * ice_set_phy_type_from_speed - set phy_types based on speeds + * and advertised modes + * @ks: ethtool link ksettings struct + * @phy_type_low: pointer to the lower part of phy_type + * @phy_type_high: pointer to the higher part of phy_type + * @adv_link_speed: targeted link speeds bitmap + */ +static void +ice_set_phy_type_from_speed(const struct ethtool_link_ksettings *ks, + u64 *phy_type_low, u64 *phy_type_high, + u16 adv_link_speed) +{ + /* Handle 1000M speed in a special way because ice_update_phy_type + * enables all link modes, but having mixed copper and optical + * standards is not supported. + */ + adv_link_speed &= ~ICE_AQ_LINK_SPEED_1000MB; + + if (ethtool_link_ksettings_test_link_mode(ks, advertising, + 1000baseT_Full)) + *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_T | + ICE_PHY_TYPE_LOW_1G_SGMII; + + if (ethtool_link_ksettings_test_link_mode(ks, advertising, + 1000baseKX_Full)) + *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_KX; + + if (ethtool_link_ksettings_test_link_mode(ks, advertising, + 1000baseX_Full)) + *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_SX | + ICE_PHY_TYPE_LOW_1000BASE_LX; + + ice_update_phy_type(phy_type_low, phy_type_high, adv_link_speed); +} + /** * ice_set_link_ksettings - Set Speed and Duplex * @netdev: network interface device structure @@ -2472,7 +2508,8 @@ ice_set_link_ksettings(struct net_device *netdev, adv_link_speed = curr_link_speed; /* Convert the advertise link speeds to their corresponded PHY_TYPE */ - ice_update_phy_type(&phy_type_low, &phy_type_high, adv_link_speed); + ice_set_phy_type_from_speed(ks, &phy_type_low, &phy_type_high, + adv_link_speed); if (!autoneg_changed && adv_link_speed == curr_link_speed) { netdev_info(netdev, "Nothing changed, exiting without setting anything.\n"); From a5ed066bc2461659acbbbaf788a5c327d666e81d Mon Sep 17 00:00:00 2001 From: Aidan MacDonald Date: Mon, 20 Jun 2022 21:05:56 +0100 Subject: [PATCH 29/61] regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips [ Upstream commit 485037ae9a095491beb7f893c909a76cc4f9d1e7 ] When enabling a type_in_mask irq, the type_buf contents must be AND'd with the mask of the IRQ we're enabling to avoid enabling other IRQs by accident, which can happen if several type_in_mask irqs share a mask register. Fixes: bc998a730367 ("regmap: irq: handle HW using separate rising/falling edge interrupts") Signed-off-by: Aidan MacDonald Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/base/regmap/regmap-irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index 3d64c9331a82..3c1e554df4eb 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -214,6 +214,7 @@ static void regmap_irq_enable(struct irq_data *data) struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data); struct regmap *map = d->map; const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq); + unsigned int reg = irq_data->reg_offset / map->reg_stride; unsigned int mask, type; type = irq_data->type.type_falling_val | irq_data->type.type_rising_val; @@ -230,14 +231,14 @@ static void regmap_irq_enable(struct irq_data *data) * at the corresponding offset in regmap_irq_set_type(). */ if (d->chip->type_in_mask && type) - mask = d->type_buf[irq_data->reg_offset / map->reg_stride]; + mask = d->type_buf[reg] & irq_data->mask; else mask = irq_data->mask; if (d->chip->clear_on_unmask) d->clear_status = true; - d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~mask; + d->mask_buf[reg] &= ~mask; } static void regmap_irq_disable(struct irq_data *data) From 28a78414f21edac0d7386ebf10b6eeccb46218b1 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Tue, 21 Jun 2022 15:10:56 -0700 Subject: [PATCH 30/61] igb: Make DMA faster when CPU is active on the PCIe link [ Upstream commit 4e0effd9007ea0be31f7488611eb3824b4541554 ] Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419f040 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by: Kai-Heng Feng Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/igb/igb_main.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 26c8d09ad4dd..8734dfd001bb 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -9404,11 +9404,10 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) struct e1000_hw *hw = &adapter->hw; u32 dmac_thr; u16 hwm; + u32 reg; if (hw->mac.type > e1000_82580) { if (adapter->flags & IGB_FLAG_DMAC) { - u32 reg; - /* force threshold to 0. */ wr32(E1000_DMCTXTH, 0); @@ -9441,7 +9440,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) /* Disable BMC-to-OS Watchdog Enable */ if (hw->mac.type != e1000_i354) reg &= ~E1000_DMACR_DC_BMC2OSW_EN; - wr32(E1000_DMACR, reg); /* no lower threshold to disable @@ -9458,12 +9456,12 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) */ wr32(E1000_DMCTXTH, (IGB_MIN_TXPBSIZE - (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6); + } - /* make low power state decision controlled - * by DMA coal - */ + if (hw->mac.type >= e1000_i210 || + (adapter->flags & IGB_FLAG_DMAC)) { reg = rd32(E1000_PCIEMISC); - reg &= ~E1000_PCIEMISC_LX_DECISION; + reg |= E1000_PCIEMISC_LX_DECISION; wr32(E1000_PCIEMISC, reg); } /* endif adapter->dmac is not disabled */ } else if (hw->mac.type == e1000_82580) { From 8c7a32b7c15555beddc5810c3334d9cefff061bf Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Tue, 21 Jun 2022 13:48:44 +0200 Subject: [PATCH 31/61] virtio_net: fix xdp_rxq_info bug after suspend/resume [ Upstream commit 8af52fe9fd3bf5e7478da99193c0632276e1dfce ] The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info") Signed-off-by: Stephan Gerhold Acked-by: Jesper Dangaard Brouer Acked-by: Jason Wang Link: https://lore.kernel.org/r/20220621114845.3650258-1-stephan.gerhold@kernkonzept.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/virtio_net.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 37c2cecd1e50..f4c03518d7d2 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2393,7 +2393,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = { static void virtnet_freeze_down(struct virtio_device *vdev) { struct virtnet_info *vi = vdev->priv; - int i; /* Make sure no work handler is accessing the device */ flush_work(&vi->config_work); @@ -2401,14 +2400,8 @@ static void virtnet_freeze_down(struct virtio_device *vdev) netif_tx_lock_bh(vi->dev); netif_device_detach(vi->dev); netif_tx_unlock_bh(vi->dev); - cancel_delayed_work_sync(&vi->refill); - - if (netif_running(vi->dev)) { - for (i = 0; i < vi->max_queue_pairs; i++) { - napi_disable(&vi->rq[i].napi); - virtnet_napi_tx_disable(&vi->sq[i].napi); - } - } + if (netif_running(vi->dev)) + virtnet_close(vi->dev); } static int init_vqs(struct virtnet_info *vi); @@ -2416,7 +2409,7 @@ static int init_vqs(struct virtnet_info *vi); static int virtnet_restore_up(struct virtio_device *vdev) { struct virtnet_info *vi = vdev->priv; - int err, i; + int err; err = init_vqs(vi); if (err) @@ -2425,15 +2418,9 @@ static int virtnet_restore_up(struct virtio_device *vdev) virtio_device_ready(vdev); if (netif_running(vi->dev)) { - for (i = 0; i < vi->curr_queue_pairs; i++) - if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL)) - schedule_delayed_work(&vi->refill, 0); - - for (i = 0; i < vi->max_queue_pairs; i++) { - virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi); - virtnet_napi_tx_enable(vi, vi->sq[i].vq, - &vi->sq[i].napi); - } + err = virtnet_open(vi->dev); + if (err) + return err; } netif_tx_lock_bh(vi->dev); From bb18ad00c0b77acff2d6d5d5dda10e233e9a48d2 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 20 Jun 2022 12:13:52 -0700 Subject: [PATCH 32/61] Revert "net/tls: fix tls_sk_proto_close executed repeatedly" [ Upstream commit 1b205d948fbb06a7613d87dcea0ff5fd8a08ed91 ] This reverts commit 69135c572d1f84261a6de2a1268513a7e71753e2. This commit was just papering over the issue, ULP should not get ->update() called with its own sk_prot. Each ULP would need to add this check. Fixes: 69135c572d1f ("net/tls: fix tls_sk_proto_close executed repeatedly") Signed-off-by: Jakub Kicinski Reviewed-by: John Fastabend Link: https://lore.kernel.org/r/20220620191353.1184629-1-kuba@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- net/tls/tls_main.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index df9177d96f7f..7aba4ee77aba 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -803,9 +803,6 @@ static void tls_update(struct sock *sk, struct proto *p, { struct tls_context *ctx; - if (sk->sk_prot == p) - return; - ctx = tls_get_ctx(sk); if (likely(ctx)) { ctx->sk_write_space = write_space; From 4837d1c81223fc89dd005e4136da670fa43744c3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 23 Jun 2022 11:29:48 +0300 Subject: [PATCH 33/61] gpio: winbond: Fix error code in winbond_gpio_get() [ Upstream commit 9ca766eaea2e87b8b773bff04ee56c055cb76d4e ] This error path returns 1, but it should instead propagate the negative error code from winbond_sio_enter(). Fixes: a0d65009411c ("gpio: winbond: Add driver") Signed-off-by: Dan Carpenter Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin --- drivers/gpio/gpio-winbond.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-winbond.c b/drivers/gpio/gpio-winbond.c index 7f8f5b02e31d..4b61d975cc0e 100644 --- a/drivers/gpio/gpio-winbond.c +++ b/drivers/gpio/gpio-winbond.c @@ -385,12 +385,13 @@ static int winbond_gpio_get(struct gpio_chip *gc, unsigned int offset) unsigned long *base = gpiochip_get_data(gc); const struct winbond_gpio_info *info; bool val; + int ret; winbond_gpio_get_info(&offset, &info); - val = winbond_sio_enter(*base); - if (val) - return val; + ret = winbond_sio_enter(*base); + if (ret) + return ret; winbond_sio_select_logical(*base, info->dev); From 741b6c8363c2c5cad2ad53928a1d650d767ebbcc Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 10 Jun 2022 15:19:00 +0200 Subject: [PATCH 34/61] s390/cpumf: Handle events cycles and instructions identical [ Upstream commit be857b7f77d130dbbd47c91fc35198b040f35865 ] Events CPU_CYCLES and INSTRUCTIONS can be submitted with two different perf_event attribute::type values: - PERF_TYPE_HARDWARE: when invoked via perf tool predefined events name cycles or cpu-cycles or instructions. - pmu->type: when invoked via perf tool event name cpu_cf/CPU_CYLCES/ or cpu_cf/INSTRUCTIONS/. This invocation also selects the PMU to which the event belongs. Handle both type of invocations identical for events CPU_CYLCES and INSTRUCTIONS. They address the same hardware. The result is different when event modifier exclude_kernel is also set. Invocation with event modifier for user space event counting fails. Output before: # perf stat -e cpum_cf/cpu_cycles/u -- true Performance counter stats for 'true': cpum_cf/cpu_cycles/u 0.000761033 seconds time elapsed 0.000076000 seconds user 0.000725000 seconds sys # Output after: # perf stat -e cpum_cf/cpu_cycles/u -- true Performance counter stats for 'true': 349,613 cpum_cf/cpu_cycles/u 0.000844143 seconds time elapsed 0.000079000 seconds user 0.000800000 seconds sys # Fixes: 6a82e23f45fe ("s390/cpumf: Adjust registration of s390 PMU device drivers") Signed-off-by: Thomas Richter Acked-by: Sumanth Korikkar [agordeev@linux.ibm.com corrected commit ID of Fixes commit] Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin --- arch/s390/kernel/perf_cpum_cf.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index 0eb1d1cc53a8..dddb32e53db8 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -292,6 +292,26 @@ static int __hw_perf_event_init(struct perf_event *event, unsigned int type) return err; } +/* Events CPU_CYLCES and INSTRUCTIONS can be submitted with two different + * attribute::type values: + * - PERF_TYPE_HARDWARE: + * - pmu->type: + * Handle both type of invocations identical. They address the same hardware. + * The result is different when event modifiers exclude_kernel and/or + * exclude_user are also set. + */ +static int cpumf_pmu_event_type(struct perf_event *event) +{ + u64 ev = event->attr.config; + + if (cpumf_generic_events_basic[PERF_COUNT_HW_CPU_CYCLES] == ev || + cpumf_generic_events_basic[PERF_COUNT_HW_INSTRUCTIONS] == ev || + cpumf_generic_events_user[PERF_COUNT_HW_CPU_CYCLES] == ev || + cpumf_generic_events_user[PERF_COUNT_HW_INSTRUCTIONS] == ev) + return PERF_TYPE_HARDWARE; + return PERF_TYPE_RAW; +} + static int cpumf_pmu_event_init(struct perf_event *event) { unsigned int type = event->attr.type; @@ -301,7 +321,7 @@ static int cpumf_pmu_event_init(struct perf_event *event) err = __hw_perf_event_init(event, type); else if (event->pmu->type == type) /* Registered as unknown PMU */ - err = __hw_perf_event_init(event, PERF_TYPE_RAW); + err = __hw_perf_event_init(event, cpumf_pmu_event_type(event)); else return -ENOENT; From d62d1c606db036a5e8d5cef7df086f1c0b28f45d Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 30 May 2022 11:50:26 +0300 Subject: [PATCH 35/61] iio: adc: vf610: fix conversion mode sysfs node name [ Upstream commit f1a633b15cd5371a2a83f02c513984e51132dd68 ] The documentation missed the "in_" prefix for this IIO_SHARED_BY_DIR entry. Fixes: bf04c1a367e3 ("iio: adc: vf610: implement configurable conversion modes") Signed-off-by: Baruch Siach Acked-by: Haibo Chen Link: https://lore.kernel.org/r/560dc93fafe5ef7e9a409885fd20b6beac3973d8.1653900626.git.baruch@tkos.co.il Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin --- Documentation/ABI/testing/sysfs-bus-iio-vf610 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610 index 308a6756d3bf..491ead804488 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-vf610 +++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610 @@ -1,4 +1,4 @@ -What: /sys/bus/iio/devices/iio:deviceX/conversion_mode +What: /sys/bus/iio/devices/iio:deviceX/in_conversion_mode KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: From 47e41b4dabbf4d0a64dd24117f8f0189ce8f3af7 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 23 Jun 2022 14:19:43 +0300 Subject: [PATCH 36/61] xhci: turn off port power in shutdown commit 83810f84ecf11dfc5a9414a8b762c3501b328185 upstream. If ports are not turned off in shutdown then runtime suspended self-powered USB devices may survive in U3 link state over S5. During subsequent boot, if firmware sends an IPC command to program the port in DISCONNECT state, it will time out, causing significant delay in the boot time. Turning off roothub port power is also recommended in xhci specification 4.19.4 "Port Power" in the additional note. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220623111945.1557702-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci.c | 15 +++++++++++++-- drivers/usb/host/xhci.h | 2 ++ 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index dd46c15c4853..9c066d1c512b 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -566,7 +566,7 @@ struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) * It will release and re-aquire the lock while calling ACPI * method. */ -static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, +void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) { struct xhci_hub *rhub; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2f59d447411b..9fe35bb67731 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -775,6 +775,8 @@ static void xhci_stop(struct usb_hcd *hcd) void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + unsigned long flags; + int i; if (xhci->quirks & XHCI_SPURIOUS_REBOOT) usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev)); @@ -790,12 +792,21 @@ void xhci_shutdown(struct usb_hcd *hcd) del_timer_sync(&xhci->shared_hcd->rh_timer); } - spin_lock_irq(&xhci->lock); + spin_lock_irqsave(&xhci->lock, flags); xhci_halt(xhci); + + /* Power off USB2 ports*/ + for (i = 0; i < xhci->usb2_rhub.num_ports; i++) + xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags); + + /* Power off USB3 ports*/ + for (i = 0; i < xhci->usb3_rhub.num_ports; i++) + xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags); + /* Workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) xhci_reset(xhci, XHCI_RESET_SHORT_USEC); - spin_unlock_irq(&xhci->lock); + spin_unlock_irqrestore(&xhci->lock, flags); xhci_cleanup_msix(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 4b05d767e08f..a9031f494984 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2155,6 +2155,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1); struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd); +void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, + bool on, unsigned long *flags); void xhci_hc_died(struct xhci_hcd *xhci); From 2333db14d875919b523c6741c2adc019cc78e845 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Thu, 23 Jun 2022 11:02:42 +0800 Subject: [PATCH 37/61] usb: chipidea: udc: check request status before setting device address commit b24346a240b36cfc4df194d145463874985aa29b upstream. The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly. Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9") cc: Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 8f18e7b6cadf..21c299c85505 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -921,6 +921,9 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) struct ci_hdrc *ci = req->context; unsigned long flags; + if (req->status < 0) + return; + if (ci->setaddr) { hw_usb_set_address(ci, ci->address); ci->setaddr = false; From 8ea16a64aafc3045d52952030ac900054bc94c72 Mon Sep 17 00:00:00 2001 From: Dmitry Rokosov Date: Tue, 24 May 2022 18:14:45 +0000 Subject: [PATCH 38/61] iio:chemical:ccs811: rearrange iio trigger get and register commit d710359c0b445e8c03e24f19ae2fb79ce7282260 upstream. IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: f1f065d7ac30 ("iio: chemical: ccs811: Add support for data ready trigger") Signed-off-by: Dmitry Rokosov Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220524181150.9240-5-ddrokosov@sberdevices.ru Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/chemical/ccs811.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c index 7bf4e9a16a6a..a2ee6bbda7f4 100644 --- a/drivers/iio/chemical/ccs811.c +++ b/drivers/iio/chemical/ccs811.c @@ -418,11 +418,11 @@ static int ccs811_probe(struct i2c_client *client, data->drdy_trig->dev.parent = &client->dev; data->drdy_trig->ops = &ccs811_trigger_ops; iio_trigger_set_drvdata(data->drdy_trig, indio_dev); - indio_dev->trig = data->drdy_trig; - iio_trigger_get(indio_dev->trig); ret = iio_trigger_register(data->drdy_trig); if (ret) goto err_poweroff; + + indio_dev->trig = iio_trigger_get(data->drdy_trig); } ret = iio_triggered_buffer_setup(indio_dev, NULL, From 23c158caa0327425e3aa5fb16b6b0b34ce917c8d Mon Sep 17 00:00:00 2001 From: Dmitry Rokosov Date: Tue, 24 May 2022 18:14:39 +0000 Subject: [PATCH 39/61] iio:accel:bma180: rearrange iio trigger get and register commit e5f3205b04d7f95a2ef43bce4b454a7f264d6923 upstream. IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: 0668a4e4d297 ("iio: accel: bma180: Fix indio_dev->trig assignment") Signed-off-by: Dmitry Rokosov Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220524181150.9240-2-ddrokosov@sberdevices.ru Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/accel/bma180.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index acf1cc2bee07..014788ea493a 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -793,11 +793,12 @@ static int bma180_probe(struct i2c_client *client, data->trig->dev.parent = &client->dev; data->trig->ops = &bma180_trigger_ops; iio_trigger_set_drvdata(data->trig, indio_dev); - indio_dev->trig = iio_trigger_get(data->trig); ret = iio_trigger_register(data->trig); if (ret) goto err_trigger_free; + + indio_dev->trig = iio_trigger_get(data->trig); } ret = iio_triggered_buffer_setup(indio_dev, NULL, From a391bced840437f9161ed09a4851f80a4212aa42 Mon Sep 17 00:00:00 2001 From: Dmitry Rokosov Date: Tue, 24 May 2022 18:14:43 +0000 Subject: [PATCH 40/61] iio:accel:mxc4005: rearrange iio trigger get and register commit 9354c224c9b4f55847a0de3e968cba2ebf15af3b upstream. IIO trigger interface function iio_trigger_get() should be called after iio_trigger_register() (or its devm analogue) strictly, because of iio_trigger_get() acquires module refcnt based on the trigger->owner pointer, which is initialized inside iio_trigger_register() to THIS_MODULE. If this call order is wrong, the next iio_trigger_put() (from sysfs callback or "delete module" path) will dereference "default" module refcnt, which is incorrect behaviour. Fixes: 47196620c82f ("iio: mxc4005: add data ready trigger for mxc4005") Signed-off-by: Dmitry Rokosov Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220524181150.9240-4-ddrokosov@sberdevices.ru Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/accel/mxc4005.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index d81b02642a0b..110b7ea76ef2 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -462,8 +462,6 @@ static int mxc4005_probe(struct i2c_client *client, data->dready_trig->dev.parent = &client->dev; data->dready_trig->ops = &mxc4005_trigger_ops; iio_trigger_set_drvdata(data->dready_trig, indio_dev); - indio_dev->trig = data->dready_trig; - iio_trigger_get(indio_dev->trig); ret = devm_iio_trigger_register(&client->dev, data->dready_trig); if (ret) { @@ -471,6 +469,8 @@ static int mxc4005_probe(struct i2c_client *client, "failed to register trigger\n"); return ret; } + + indio_dev->trig = iio_trigger_get(data->dready_trig); } return devm_iio_device_register(&client->dev, indio_dev); From 1ad6d668543d4a9d68e6284d658e878c26afbab5 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Wed, 15 Jun 2022 19:31:58 +0800 Subject: [PATCH 41/61] iio: accel: mma8452: ignore the return value of reset operation commit bf745142cc0a3e1723f9207fb0c073c88464b7b4 upstream. On fxls8471, after set the reset bit, the device will reset immediately, will not give ACK. So ignore the return value of this reset operation, let the following code logic to check whether the reset operation works. Signed-off-by: Haibo Chen Fixes: ecabae713196 ("iio: mma8452: Initialise before activating") Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/1655292718-14287-1-git-send-email-haibo.chen@nxp.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/accel/mma8452.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index eaaee6f2a978..74942bfc676a 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1489,10 +1489,14 @@ static int mma8452_reset(struct i2c_client *client) int i; int ret; - ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2, + /* + * Find on fxls8471, after config reset bit, it reset immediately, + * and will not give ACK, so here do not check the return value. + * The following code will read the reset register, and check whether + * this reset works. + */ + i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2, MMA8452_CTRL_REG2_RST); - if (ret < 0) - return ret; for (i = 0; i < 10; i++) { usleep_range(100, 200); From 6d2e68d02171898ae47813c1581c26293dea4954 Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Tue, 10 May 2022 17:24:31 +0800 Subject: [PATCH 42/61] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() commit b2f5ad97645e1deb5ca9bcb7090084b92cae35d2 upstream. The driver should disable regulators when fails at regmap_update_bits(). Signed-off-by: Zheyu Ma Reviewed-by: Linus Walleij Cc: Link: https://lore.kernel.org/r/20220510092431.1711284-1-zheyuma97@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/gyro/mpu3050-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c index 75db410b5054..0f5de4afe33f 100644 --- a/drivers/iio/gyro/mpu3050-core.c +++ b/drivers/iio/gyro/mpu3050-core.c @@ -874,6 +874,7 @@ static int mpu3050_power_up(struct mpu3050 *mpu3050) ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM, MPU3050_PWR_MGM_SLEEP, 0); if (ret) { + regulator_bulk_disable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs); dev_err(mpu3050->dev, "error setting power mode\n"); return ret; } From 5e39397d60dacc7f5d81d442c1c958eaaaf31128 Mon Sep 17 00:00:00 2001 From: Vincent Whitchurch Date: Thu, 19 May 2022 11:19:25 +0200 Subject: [PATCH 43/61] iio: trigger: sysfs: fix use-after-free on remove commit 78601726d4a59a291acc5a52da1d3a0a6831e4e8 upstream. Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ================================================================== Fixes: f38bc926d022 ("staging:iio:sysfs-trigger: Use irq_work to properly active trigger") Signed-off-by: Vincent Whitchurch Reviewed-by: Lars-Peter Clausen Link: https://lore.kernel.org/r/20220519091925.1053897-1-vincent.whitchurch@axis.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/trigger/iio-trig-sysfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c index e09e58072872..2277d6336ac0 100644 --- a/drivers/iio/trigger/iio-trig-sysfs.c +++ b/drivers/iio/trigger/iio-trig-sysfs.c @@ -196,6 +196,7 @@ static int iio_sysfs_trigger_remove(int id) } iio_trigger_unregister(t->trig); + irq_work_sync(&t->work); iio_trigger_free(t->trig); list_del(&t->l); From 11c7ea38be91025ca741b365e18e40523f04ce6f Mon Sep 17 00:00:00 2001 From: Olivier Moysan Date: Thu, 9 Jun 2022 11:52:34 +0200 Subject: [PATCH 44/61] iio: adc: stm32: fix maximum clock rate for stm32mp15x commit 990539486e7e311fb5dab1bf4d85d1a8973ae644 upstream. Change maximum STM32 ADC input clock rate to 36MHz, as specified in STM32MP15x datasheets. Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1") Signed-off-by: Olivier Moysan Reviewed-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20220609095234.375925-1-olivier.moysan@foss.st.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/stm32-adc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c index 14d6a537289c..0ecec5a15fbf 100644 --- a/drivers/iio/adc/stm32-adc-core.c +++ b/drivers/iio/adc/stm32-adc-core.c @@ -815,7 +815,7 @@ static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = { static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = { .regs = &stm32h7_adc_common_regs, .clk_sel = stm32h7_adc_clk_sel, - .max_clk_rate_hz = 40000000, + .max_clk_rate_hz = 36000000, .has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD, .num_irqs = 2, }; From f0fc7cdf5f19e33396323a7b300d317460e86c89 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 6 May 2022 11:50:40 +0200 Subject: [PATCH 45/61] iio: adc: axp288: Override TS pin bias current for some models MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 048058399f19d43cf21de9f5d36cd8144337d004 upstream. Since commit 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") we preserve the bias current set by the firmware at boot. This fixes issues we were seeing on various models. Some models like the Nuvision Solo 10 Draw tablet actually need the old hardcoded 80ųA bias current for battery temperature monitoring to work properly. Add a quirk entry for the Nuvision Solo 10 Draw to the DMI quirk table to restore setting the bias current to 80ųA on this model. Fixes: 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215882 Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220506095040.21008-1-hdegoede@redhat.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/axp288_adc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 8ea2aed6d6f5..99ceaa09ef39 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -196,6 +196,14 @@ static const struct dmi_system_id axp288_adc_ts_bias_override[] = { }, .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA, }, + { + /* Nuvision Solo 10 Draw */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TMAX"), + DMI_MATCH(DMI_PRODUCT_NAME, "TM101W610L"), + }, + .driver_data = (void *)(uintptr_t)AXP288_ADC_TS_BIAS_80UA, + }, {} }; From a52972ee706b438302eb0350e61f378eb191e3d1 Mon Sep 17 00:00:00 2001 From: Liang He Date: Fri, 17 Jun 2022 19:53:23 +0800 Subject: [PATCH 46/61] xtensa: xtfpga: Fix refcount leak bug in setup commit 173940b3ae40114d4179c251a98ee039dc9cd5b3 upstream. In machine_setup(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Cc: stable@vger.kernel.org Signed-off-by: Liang He Message-Id: <20220617115323.4046905-1-windhl@126.com> Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman --- arch/xtensa/platforms/xtfpga/setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 4edccb4d4a5f..340479a328dc 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -148,6 +148,7 @@ static int __init machine_setup(void) if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc"))) update_local_mac(eth); + of_node_put(eth); return 0; } arch_initcall(machine_setup); From e5234a9d64a976abd134a14710dcd5188158a7c5 Mon Sep 17 00:00:00 2001 From: Liang He Date: Fri, 17 Jun 2022 20:44:32 +0800 Subject: [PATCH 47/61] xtensa: Fix refcount leak bug in time.c commit a0117dc956429f2ede17b323046e1968d1849150 upstream. In calibrate_ccount(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Cc: stable@vger.kernel.org Signed-off-by: Liang He Message-Id: <20220617124432.4049006-1-windhl@126.com> Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman --- arch/xtensa/kernel/time.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 69db8c93c1f9..9b87a9b98727 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -160,6 +160,7 @@ static void __init calibrate_ccount(void) cpu = of_find_compatible_node(NULL, NULL, "cdns,xtensa-cpu"); if (cpu) { clk = of_clk_get(cpu, 0); + of_node_put(cpu); if (!IS_ERR(clk)) { ccount_freq = clk_get_rate(clk); return; From e0701f150b28753a0d56dbd23e1d7e5c851c66be Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 26 Jun 2022 11:50:43 +0200 Subject: [PATCH 48/61] parisc: Enable ARCH_HAS_STRICT_MODULE_RWX commit 0a1355db36718178becd2bfe728a023933d73123 upstream. Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes patch_map() to return an alias mapping to the to-be-patched code in order to prevent writing to write-protected memory. Signed-off-by: Helge Deller Suggested-by: John David Anglin Cc: stable@vger.kernel.org # v5.2+ Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/ Signed-off-by: Greg Kroah-Hartman --- arch/parisc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 0c29d6cb2c8d..c97c01c75566 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -11,6 +11,7 @@ config PARISC select ARCH_WANT_FRAME_POINTERS select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_STRICT_KERNEL_RWX + select ARCH_HAS_STRICT_MODULE_RWX select ARCH_HAS_UBSAN_SANITIZE_ALL select ARCH_NO_SG_CHAIN select ARCH_SUPPORTS_MEMORY_FAILURE From b6232979320a4c5b493a2f9b93144e5c240d7315 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Thu, 9 Jun 2022 16:03:28 +0530 Subject: [PATCH 49/61] powerpc: Enable execve syscall exit tracepoint commit ec6d0dde71d760aa60316f8d1c9a1b0d99213529 upstream. On execve[at], we are zero'ing out most of the thread register state including gpr[0], which contains the syscall number. Due to this, we fail to trigger the syscall exit tracepoint properly. Fix this by retaining gpr[0] in the thread register state. Before this patch: # tail /sys/kernel/debug/tracing/trace cat-123 [000] ..... 61.449351: sys_execve(filename: 7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8) cat-124 [000] ..... 62.428481: sys_execve(filename: 7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8) echo-125 [000] ..... 65.813702: sys_execve(filename: 7fffa6b23378, argv: 7fffa6b233a0, envp: 7fffa6b233b0) echo-125 [000] ..... 65.822214: sys_execveat(fd: 0, filename: 1009ac48, argv: 7ffff65d0c98, envp: 7ffff65d0ca8, flags: 0) After this patch: # tail /sys/kernel/debug/tracing/trace cat-127 [000] ..... 100.416262: sys_execve(filename: 7fffa41b3448, argv: 7fffa41b33e0, envp: 7fffa41b33f8) cat-127 [000] ..... 100.418203: sys_execve -> 0x0 echo-128 [000] ..... 103.873968: sys_execve(filename: 7fffa41b3378, argv: 7fffa41b33a0, envp: 7fffa41b33b0) echo-128 [000] ..... 103.875102: sys_execve -> 0x0 echo-128 [000] ..... 103.882097: sys_execveat(fd: 0, filename: 1009ac48, argv: 7fffd10d2148, envp: 7fffd10d2158, flags: 0) echo-128 [000] ..... 103.883225: sys_execveat -> 0x0 Cc: stable@vger.kernel.org Signed-off-by: Naveen N. Rao Tested-by: Sumit Dubey2 Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220609103328.41306-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 832663f21422..cf87573e6e78 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1719,7 +1719,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) tm_reclaim_current(0); #endif - memset(regs->gpr, 0, sizeof(regs->gpr)); + memset(®s->gpr[1], 0, sizeof(regs->gpr) - sizeof(regs->gpr[0])); regs->ctr = 0; regs->link = 0; regs->xer = 0; From 97808c781721617c10b9a30e9022f639b21934cd Mon Sep 17 00:00:00 2001 From: Andrew Donnellan Date: Tue, 14 Jun 2022 23:49:52 +1000 Subject: [PATCH 50/61] powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address commit 7bc08056a6dabc3a1442216daf527edf61ac24b6 upstream. Add a special case to block_rtas_call() to allow the ibm,platform-dump RTAS call through the RTAS filter if the buffer address is 0. According to PAPR, ibm,platform-dump is called with a null buffer address to notify the platform firmware that processing of a particular dump is finished. Without this, on a pseries machine with CONFIG_PPC_RTAS_FILTER enabled, an application such as rtas_errd that is attempting to retrieve a dump will encounter an error at the end of the retrieval process. Fixes: bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace") Cc: stable@vger.kernel.org Reported-by: Sathvika Vasireddy Signed-off-by: Andrew Donnellan Reviewed-by: Tyrel Datwyler Reviewed-by: Nathan Lynch Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220614134952.156010-1-ajd@linux.ibm.com Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/kernel/rtas.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 9392661ac8a8..35e246e39705 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -988,7 +988,7 @@ static struct rtas_filter rtas_filters[] __ro_after_init = { { "get-time-of-day", -1, -1, -1, -1, -1 }, { "ibm,get-vpd", -1, 0, -1, 1, 2 }, { "ibm,lpar-perftools", -1, 2, 3, -1, -1 }, - { "ibm,platform-dump", -1, 4, 5, -1, -1 }, + { "ibm,platform-dump", -1, 4, 5, -1, -1 }, /* Special cased */ { "ibm,read-slot-reset-state", -1, -1, -1, -1, -1 }, { "ibm,scan-log-dump", -1, 0, 1, -1, -1 }, { "ibm,set-dynamic-indicator", -1, 2, -1, -1, -1 }, @@ -1035,6 +1035,15 @@ static bool block_rtas_call(int token, int nargs, size = 1; end = base + size - 1; + + /* + * Special case for ibm,platform-dump - NULL buffer + * address is used to indicate end of dump processing + */ + if (!strcmp(f->name, "ibm,platform-dump") && + base == 0) + return false; + if (!in_rmo_buf(base, end)) goto err; } From 93e6137d2a5b0d1385e98bf507100d8ac050e533 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Tue, 21 Jun 2022 16:08:49 +0200 Subject: [PATCH 51/61] powerpc/powernv: wire up rng during setup_arch commit f3eac426657d985b97c92fa5f7ae1d43f04721f3 upstream. The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Complicating things, however, is that POWER8 systems need some per-cpu state and kmalloc, which isn't available at this stage. So we split things up into an early phase and a later opportunistic phase. This commit also removes some noisy log messages that don't add much. Fixes: a4da0d50b2a0 ("powerpc: Implement arch_get_random_long/int() for powernv") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Jason A. Donenfeld Reviewed-by: Christophe Leroy [mpe: Add of_node_put(), use pnv naming, minor change log editing] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220621140849.127227-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/platforms/powernv/powernv.h | 2 + arch/powerpc/platforms/powernv/rng.c | 52 ++++++++++++++++-------- arch/powerpc/platforms/powernv/setup.c | 2 + 3 files changed, 40 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index 1aa51c4fa904..4825e4cf4410 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -35,4 +35,6 @@ ssize_t memcons_copy(struct memcons *mc, char *to, loff_t pos, size_t count); u32 memcons_get_size(struct memcons *mc); struct memcons *memcons_init(struct device_node *node, const char *mc_prop_name); +void pnv_rng_init(void); + #endif /* _POWERNV_H */ diff --git a/arch/powerpc/platforms/powernv/rng.c b/arch/powerpc/platforms/powernv/rng.c index 1c31863a9be6..eba4142998b0 100644 --- a/arch/powerpc/platforms/powernv/rng.c +++ b/arch/powerpc/platforms/powernv/rng.c @@ -17,6 +17,7 @@ #include #include #include +#include "powernv.h" #define DARN_ERR 0xFFFFFFFFFFFFFFFFul @@ -28,7 +29,6 @@ struct powernv_rng { static DEFINE_PER_CPU(struct powernv_rng *, powernv_rng); - int powernv_hwrng_present(void) { struct powernv_rng *rng; @@ -98,9 +98,6 @@ static int initialise_darn(void) return 0; } } - - pr_warn("Unable to use DARN for get_random_seed()\n"); - return -EIO; } @@ -163,32 +160,55 @@ static __init int rng_create(struct device_node *dn) rng_init_per_cpu(rng, dn); - pr_info_once("Registering arch random hook.\n"); - ppc_md.get_random_seed = powernv_get_random_long; return 0; } -static __init int rng_init(void) +static int __init pnv_get_random_long_early(unsigned long *v) { struct device_node *dn; - int rc; + + if (!slab_is_available()) + return 0; + + if (cmpxchg(&ppc_md.get_random_seed, pnv_get_random_long_early, + NULL) != pnv_get_random_long_early) + return 0; for_each_compatible_node(dn, NULL, "ibm,power-rng") { - rc = rng_create(dn); - if (rc) { - pr_err("Failed creating rng for %pOF (%d).\n", - dn, rc); + if (rng_create(dn)) continue; - } - /* Create devices for hwrng driver */ of_platform_device_create(dn, NULL, NULL); } - initialise_darn(); + if (!ppc_md.get_random_seed) + return 0; + return ppc_md.get_random_seed(v); +} +void __init pnv_rng_init(void) +{ + struct device_node *dn; + + /* Prefer darn over the rest. */ + if (!initialise_darn()) + return; + + dn = of_find_compatible_node(NULL, NULL, "ibm,power-rng"); + if (dn) + ppc_md.get_random_seed = pnv_get_random_long_early; + + of_node_put(dn); +} + +static int __init pnv_rng_late_init(void) +{ + unsigned long v; + /* In case it wasn't called during init for some other reason. */ + if (ppc_md.get_random_seed == pnv_get_random_long_early) + pnv_get_random_long_early(&v); return 0; } -machine_subsys_initcall(powernv, rng_init); +machine_subsys_initcall(powernv, pnv_rng_late_init); diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 1b7b0d0c3ebd..d9e26614d7ed 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -168,6 +168,8 @@ static void __init pnv_setup_arch(void) powersave_nap = 1; /* XXX PMCS */ + + pnv_rng_init(); } static void __init pnv_init(void) From 615907ccc4216f28e133b2275113655f8943fe74 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 11 May 2022 18:08:23 +0200 Subject: [PATCH 52/61] ARM: dts: imx6qdl: correct PU regulator ramp delay commit 93a8ba2a619816d631bd69e9ce2172b4d7a481b8 upstream. Contrary to what was believed at the time, the ramp delay of 150us is not plenty for the PU LDO with the default step time of 512 pulses of the 24MHz clock. Measurements have shown that after enabling the LDO the voltage on VDDPU_CAP jumps to ~750mV in the first step and after that the regulator executes the normal ramp up as defined by the step size control. This means it takes the regulator between 360us and 370us to ramp up to the nominal 1.15V voltage for this power domain. With the old setting of the ramp delay the power up of the PU GPC domain would happen in the middle of the regulator ramp with the voltage being at around 900mV. Apparently this was enough for most units to properly power up the peripherals in the domain and execute the reset. Some units however, fail to power up properly, especially when the chip is at a low temperature. In that case any access to the GPU registers would yield an incorrect result with no way to recover from this situation. Change the ramp delay to 380us to cover the measured ramp up time with a bit of additional slack. Fixes: 40130d327f72 ("ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay") Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index bc488df31511..e9955ef12e02 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -766,7 +766,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-enable-ramp-delay = <150>; + regulator-enable-ramp-delay = <380>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; From f9b77a52937582a5b99a5a07e4ef1e2f48f87347 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Mon, 23 May 2022 18:55:13 +0400 Subject: [PATCH 53/61] ARM: exynos: Fix refcount leak in exynos_map_pmu commit c4c79525042a4a7df96b73477feaf232fe44ae81 upstream. of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer. Fixes: fce9e5bb2526 ("ARM: EXYNOS: Add support for mapping PMU base address via DT") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220523145513.12341-1-linmq006@gmail.com Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-exynos/exynos.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f226d4f57bf4..9025067ef6f5 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -136,6 +136,7 @@ static void exynos_map_pmu(void) np = of_find_matching_node(NULL, exynos_dt_pmu_match); if (np) pmu_base_addr = of_iomap(np, 0); + of_node_put(np); } static void __init exynos_init_irq(void) From 734a4d15142bb4c8ecad2d8ec70d7564e78ae34d Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Thu, 26 May 2022 11:53:22 +0400 Subject: [PATCH 54/61] soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe commit 37d838de369b07b596c19ff3662bf0293fdb09ee upstream. of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. In brcmstb_init_sram, it pass dn to of_address_to_resource(), of_address_to_resource() will call of_find_device_by_node() to take reference, so we should release the reference returned by of_find_matching_node(). Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)") Signed-off-by: Miaoqian Lin Reviewed-by: Andy Shevchenko Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman --- drivers/soc/bcm/brcmstb/pm/pm-arm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c index b1062334e608..c6ec7d95bcfc 100644 --- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c +++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c @@ -780,6 +780,7 @@ static int brcmstb_pm_probe(struct platform_device *pdev) } ret = brcmstb_init_sram(dn); + of_node_put(dn); if (ret) { pr_err("error setting up SRAM for PM\n"); return ret; From 29ca9c4efacccdc15104a8d4bf10b5183fc92840 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Wed, 1 Jun 2022 13:05:48 +0400 Subject: [PATCH 55/61] ARM: Fix refcount leak in axxia_boot_secondary commit 7c7ff68daa93d8c4cdea482da4f2429c0398fcde upstream. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 1d22924e1c4e ("ARM: Add platform support for LSI AXM55xx SoC") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220601090548.47616-1-linmq006@gmail.com' Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-axxia/platsmp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c index 512943eae30a..2e203626eda5 100644 --- a/arch/arm/mach-axxia/platsmp.c +++ b/arch/arm/mach-axxia/platsmp.c @@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle) return -ENOENT; syscon = of_iomap(syscon_np, 0); + of_node_put(syscon_np); if (!syscon) return -ENOMEM; From d1359e4129ad43e43972a28838b87291c51de23d Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Sun, 5 Jun 2022 11:58:41 +0400 Subject: [PATCH 56/61] ARM: cns3xxx: Fix refcount leak in cns3xxx_init commit 1ba904b6b16e08de5aed7c1349838d9cd0d178c5 upstream. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 415f59142d9d ("ARM: cns3xxx: initial DT support") Signed-off-by: Miaoqian Lin Acked-by: Krzysztof Halasa Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-cns3xxx/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 1d61a7701c11..d7e63f57b426 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -376,6 +376,7 @@ static void __init cns3xxx_init(void) /* De-Asscer SATA Reset */ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA)); } + of_node_put(dn); dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci"); if (of_device_is_available(dn)) { @@ -389,6 +390,7 @@ static void __init cns3xxx_init(void) cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO)); } + of_node_put(dn); pm_power_off = cns3xxx_power_off; From 80f0038d757eb5d129a712188258db01b747fab0 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 11 Jun 2022 03:32:30 +0900 Subject: [PATCH 57/61] modpost: fix section mismatch check for exported init/exit sections commit 28438794aba47a27e922857d27b31b74e8559143 upstream. Since commit f02e8a6596b7 ("module: Sort exported symbols"), EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+ (3 leading underscores instead of 2). Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL and __init/__exit. Fix the .fromsec field. Fixes: f02e8a6596b7 ("module: Sort exported symbols") Signed-off-by: Masahiro Yamada Reviewed-by: Nick Desaulniers Signed-off-by: Greg Kroah-Hartman --- scripts/mod/modpost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 59011ddf8bb8..e5aeaf72dcdb 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1131,7 +1131,7 @@ static const struct sectioncheck sectioncheck[] = { }, /* Do not export init/exit functions or data */ { - .fromsec = { "__ksymtab*", NULL }, + .fromsec = { "___ksymtab*", NULL }, .bad_tosec = { INIT_SECTIONS, EXIT_SECTIONS, NULL }, .mismatch = EXPORT_TO_INIT_EXIT, .symbol_white_list = { DEFAULT_SYMBOL_WHITE_LIST, NULL }, From 2a81e813141ea5d26ff1edb4241033e14bb507fb Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Mon, 20 Jun 2022 11:03:48 +0200 Subject: [PATCH 58/61] random: update comment from copy_to_user() -> copy_to_iter() commit 63b8ea5e4f1a87dea4d3114293fc8e96a8f193d7 upstream. This comment wasn't updated when we moved from read() to read_iter(), so this patch makes the trivial fix. Fixes: 1b388e7765f2 ("random: convert to using fops->read_iter()") Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index b86bee9284fa..1ef94d112521 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -450,7 +450,7 @@ static ssize_t get_random_bytes_user(struct iov_iter *iter) /* * Immediately overwrite the ChaCha key at index 4 with random - * bytes, in case userspace causes copy_to_user() below to sleep + * bytes, in case userspace causes copy_to_iter() below to sleep * forever, so that we still retain forward secrecy in that case. */ crng_make_state(chacha_state, (u8 *)&chacha_state[4], CHACHA_KEY_SIZE); From ece98389028789f76a08eab82aac38749818aa21 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 24 Jun 2022 04:11:47 +0900 Subject: [PATCH 59/61] kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) commit 53632ba87d9f302a8d97a11ec2f4f4eec7bb75ea upstream. If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from a pristine state, the vmlinux is linked twice. Commit 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix the issue at all. Now I realized I had applied a wrong patch. In v1 patch [1], the autoksyms_recursive target correctly recurses to "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive". In v2 patch [2], I accidentally dropped the diff line, and it recurses to "$(MAKE) -f $(srctree)/Makefile vmlinux". Restore the code I intended in v1. [1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/ [2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/ Fixes: 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") Signed-off-by: Masahiro Yamada Tested-by: Sami Tolvanen Reviewed-by: Nick Desaulniers Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 75be5870cc55..ae9156f804e5 100644 --- a/Makefile +++ b/Makefile @@ -1073,7 +1073,7 @@ PHONY += autoksyms_recursive ifdef CONFIG_TRIM_UNUSED_KSYMS autoksyms_recursive: descend modules.order $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \ - "$(MAKE) -f $(srctree)/Makefile vmlinux" + "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive" endif # For the kernel to actually contain only the needed exported symbols, From ceda71d49f6b397b2046c7e387ec16cf5adf4d0c Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Sat, 11 Jun 2022 17:10:15 +0200 Subject: [PATCH 60/61] powerpc/pseries: wire up rng during setup_arch() commit e561e472a3d441753bd012333b057f48fef1045b upstream. The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Fortunately, each platform already has a setup_arch function pointer, which means it's easy to wire this up. This commit also removes some noisy log messages that don't add much. Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Jason A. Donenfeld Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/platforms/pseries/pseries.h | 2 ++ arch/powerpc/platforms/pseries/rng.c | 11 +++-------- arch/powerpc/platforms/pseries/setup.c | 2 ++ 3 files changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 13fa370a87e4..5fd56230b01c 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -114,4 +114,6 @@ int dlpar_workqueue_init(void); void pseries_setup_rfi_flush(void); void pseries_lpar_read_hblkrm_characteristics(void); +void pseries_rng_init(void); + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/rng.c b/arch/powerpc/platforms/pseries/rng.c index 6268545947b8..6ddfdeaace9e 100644 --- a/arch/powerpc/platforms/pseries/rng.c +++ b/arch/powerpc/platforms/pseries/rng.c @@ -10,6 +10,7 @@ #include #include #include +#include "pseries.h" static int pseries_get_random_long(unsigned long *v) @@ -24,19 +25,13 @@ static int pseries_get_random_long(unsigned long *v) return 0; } -static __init int rng_init(void) +void __init pseries_rng_init(void) { struct device_node *dn; dn = of_find_compatible_node(NULL, NULL, "ibm,random"); if (!dn) - return -ENODEV; - - pr_info("Registering arch random hook.\n"); - + return; ppc_md.get_random_seed = pseries_get_random_long; - of_node_put(dn); - return 0; } -machine_subsys_initcall(pseries, rng_init); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 16b744646ea9..d5abb25865e3 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -792,6 +792,8 @@ static void __init pSeries_setup_arch(void) if (swiotlb_force == SWIOTLB_FORCE) ppc_swiotlb_enable = 1; + + pseries_rng_init(); } static void pseries_panic(char *str) From 9ef3ad40a81ff6b8b65ed870588b230f38812f2a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 29 Jun 2022 08:58:50 +0200 Subject: [PATCH 61/61] Linux 5.4.202 Link: https://lore.kernel.org/r/20220627111927.641837068@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Guenter Roeck Tested-by: Sudip Mukherjee Tested-by: Hulk Robot Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ae9156f804e5..021878dc23f9 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 4 -SUBLEVEL = 201 +SUBLEVEL = 202 EXTRAVERSION = NAME = Kleptomaniac Octopus