Char/Misc patches for 4.6-rc1

Here is the big char/misc driver update for 4.6-rc1.
 
 The majority of the patches here is hwtracing and some new mic drivers,
 but there's a lot of other driver updates as well.  Full details in the
 shortlog.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <[email protected]>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlbp9IcACgkQMUfUDdst+ykyJgCeLTC2QNGrh51kiJglkVJ0yD36
 q4MAn0NkvSX2+iv5Jq8MaX6UQoRa4Nun
 =MNjR
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big char/misc driver update for 4.6-rc1.

  The majority of the patches here is hwtracing and some new mic
  drivers, but there's a lot of other driver updates as well.  Full
  details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (238 commits)
  goldfish: Fix build error of missing ioremap on UM
  nvmem: mediatek: Fix later provider initialization
  nvmem: imx-ocotp: Fix return value of imx_ocotp_read
  nvmem: Fix dependencies for !HAS_IOMEM archs
  char: genrtc: replace blacklist with whitelist
  drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular
  drivers: char: mem: fix IS_ERROR_VALUE usage
  char: xillybus: Fix internal data structure initialization
  pch_phub: return -ENODATA if ROM can't be mapped
  Drivers: hv: vmbus: Support kexec on ws2012 r2 and above
  Drivers: hv: vmbus: Support handling messages on multiple CPUs
  Drivers: hv: utils: Remove util transport handler from list if registration fails
  Drivers: hv: util: Pass the channel information during the init call
  Drivers: hv: vmbus: avoid unneeded compiler optimizations in vmbus_wait_for_unload()
  Drivers: hv: vmbus: remove code duplication in message handling
  Drivers: hv: vmbus: avoid wait_for_completion() on crash
  Drivers: hv: vmbus: don't loose HVMSG_TIMER_EXPIRED messages
  misc: at24: replace memory_accessor with nvmem_device_read
  eeprom: 93xx46: extend driver to plug into the NVMEM framework
  eeprom: at25: extend driver to plug into the NVMEM framework
  ...

Documentation/devicetree/bindings/goldfish/pipe.txt

@@ -0,0 +1,17 @@
+Android Goldfish QEMU Pipe
+
+Andorid pipe virtual device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,android-pipe" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	android_pipe@a010000 {
+		compatible = "google,android-pipe";
+		reg = <ff018000 0x2000>;
+		interrupts = <0x12>;
+	};

Documentation/devicetree/bindings/misc/eeprom-93xx46.txt

@@ -0,0 +1,25 @@
+EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
+
+Required properties:
+- compatible : shall be one of:
+    "atmel,at93c46d"
+    "eeprom-93xx46"
+- data-size : number of data bits per word (either 8 or 16)
+
+Optional properties:
+- read-only : parameter-less property which disables writes to the EEPROM
+- select-gpios : if present, specifies the GPIO that will be asserted prior to
+  each access to the EEPROM (e.g. for SPI bus multiplexing)
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply.  In particular, "reg" and "spi-max-frequency" properties must be given.
+
+Example:
+	eeprom@0 {
+		compatible = "eeprom-93xx46";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cs-high;
+		data-size = <8>;
+		select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+	};

Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt

@@ -0,0 +1,28 @@
+* NXP LPC18xx EEPROM memory NVMEM driver
+
+Required properties:
+  - compatible: Should be "nxp,lpc1857-eeprom"
+  - reg: Must contain an entry with the physical base address and length
+    for each entry in reg-names.
+  - reg-names: Must include the following entries.
+    - reg: EEPROM registers.
+    - mem: EEPROM address space.
+  - clocks: Must contain an entry for each entry in clock-names.
+  - clock-names: Must include the following entries.
+    - eeprom: EEPROM operating clock.
+  - resets: Should contain a reference to the reset controller asserting
+    the EEPROM in reset.
+  - interrupts: Should contain EEPROM interrupt.
+
+Example:
+
+  eeprom: eeprom@4000e000 {
+    compatible = "nxp,lpc1857-eeprom";
+    reg = <0x4000e000 0x1000>,
+          <0x20040000 0x4000>;
+    reg-names = "reg", "mem";
+    clocks = <&ccu1 CLK_CPU_EEPROM>;
+    clock-names = "eeprom";
+    resets = <&rgu 27>;
+    interrupts = <4>;
+  };

Documentation/devicetree/bindings/nvmem/mtk-efuse.txt

@@ -0,0 +1,36 @@
+= Mediatek MTK-EFUSE device tree bindings =
+
+This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs.
+
+Required properties:
+- compatible: should be "mediatek,mt8173-efuse" or "mediatek,efuse"
+- reg: Should contain registers location and length
+
+= Data cells =
+Are child nodes of MTK-EFUSE, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	efuse: efuse@10206000 {
+		compatible = "mediatek,mt8173-efuse";
+		reg	   = <0 0x10206000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Data cells */
+		thermal_calibration: calib@528 {
+			reg = <0x528 0xc>;
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+
+	thermal {
+		...
+		nvmem-cells = <&thermal_calibration>;
+		nvmem-cell-names = "calibration";
+	};