mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-30 03:27:44 -04:00
USB/PHY patches for 4.11-rc1
Here is the big USB and PHY driver updates for 4.11-rc1. Nothing major, just the normal amount of churn in the usb gadget and dwc and xhci controllers, new device ids, new phy drivers, a new usb-serial driver, and a few other minor changes in different USB drivers. All have been in linux-next for a long time with no reported issues. Signed-off-by: Greg Kroah-Hartman <[email protected]> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2lrg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykh7ACffotTJvB/gwpuSIWh6qhA8KQ9mH8AnjlxMafv b5b3vfOXJ8/N0Go25VwI =7fqN -----END PGP SIGNATURE----- Merge tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB and PHY driver updates for 4.11-rc1. Nothing major, just the normal amount of churn in the usb gadget and dwc and xhci controllers, new device ids, new phy drivers, a new usb-serial driver, and a few other minor changes in different USB drivers. All have been in linux-next for a long time with no reported issues" * tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits) usb: cdc-wdm: remove logically dead code USB: serial: keyspan: drop header file USB: serial: io_edgeport: drop io-tables header file usb: musb: add code comment for clarification usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver usb: misc: usbtest: remove redundant check on retval < 0 USB: serial: upd78f0730: sort device ids USB: serial: upd78f0730: add ID for EVAL-ADXL362Z ohci-hub: fix typo in dbg_port macro usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS usb: musb: tusb6010: Clean up tusb_omap_dma structure usb: musb: cppi_dma: Clean up cppi41_dma_controller structure usb: musb: cppi_dma: Clean up cppi structure usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback() usb: musb: dma: Add a DMA completion platform callback drivers: usb: usbip: Add missing break statement to switch usb: mtu3: remove redundant dev_err call in get_ssusb_rscs() USB: serial: mos7840: fix another NULL-deref at open USB: serial: console: clean up sanity checks USB: serial: console: fix uninitialised spinlock ...
This commit is contained in:
Linus Torvalds
commit
8ff546b801
193 changed files with 7780 additions and 4460 deletions
39
Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
Normal file
39
Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
Normal file
|
|
@ -0,0 +1,39 @@
|
|||
Broadcom USB3 phy binding for northstar plus SoC
|
||||
The USB3 phy is internal to the SoC and is accessed using mdio interface.
|
||||
|
||||
Required mdio bus properties:
|
||||
- reg: Should be 0x0 for SoC internal USB3 phy
|
||||
- #address-cells: must be 1
|
||||
- #size-cells: must be 0
|
||||
|
||||
Required USB3 PHY properties:
|
||||
- compatible: should be "brcm,nsp-usb3-phy"
|
||||
- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
|
||||
- usb3-ctrl-syscon: handler of syscon node defining physical address
|
||||
of usb3 control register.
|
||||
- #phy-cells: must be 0
|
||||
|
||||
Required usb3 control properties:
|
||||
- compatible: should be "brcm,nsp-usb3-ctrl"
|
||||
- reg: offset and length of the control registers
|
||||
|
||||
Example:
|
||||
|
||||
mdio@0 {
|
||||
reg = <0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usb3_phy: usb-phy@10 {
|
||||
compatible = "brcm,nsp-usb3-phy";
|
||||
reg = <0x10>;
|
||||
usb3-ctrl-syscon = <&usb3_ctrl>;
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
usb3_ctrl: syscon@104408 {
|
||||
compatible = "brcm,nsp-usb3-ctrl", "syscon";
|
||||
reg = <0x104408 0x3fc>;
|
||||
};
|
||||
84
Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
Normal file
84
Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
Qualcomm's USB HS PHY
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
|
||||
following:
|
||||
|
||||
"qcom,usb-hs-phy-apq8064"
|
||||
"qcom,usb-hs-phy-msm8916"
|
||||
"qcom,usb-hs-phy-msm8974"
|
||||
|
||||
- #phy-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Should contain 0
|
||||
|
||||
- clocks:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Should contain clock specifier for the reference and sleep
|
||||
clocks
|
||||
|
||||
- clock-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain "ref" and "sleep" for the reference and sleep
|
||||
clocks respectively
|
||||
|
||||
- resets:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Should contain the phy and POR resets
|
||||
|
||||
- reset-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain "phy" and "por" for the phy and POR resets
|
||||
respectively
|
||||
|
||||
- v3p3-supply:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: Should contain a reference to the 3.3V supply
|
||||
|
||||
- v1p8-supply:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: Should contain a reference to the 1.8V supply
|
||||
|
||||
- extcon:
|
||||
Usage: optional
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Should contain the vbus extcon
|
||||
|
||||
- qcom,init-seq:
|
||||
Usage: optional
|
||||
Value type: <u8 array>
|
||||
Definition: Should contain a sequence of ULPI address and value pairs to
|
||||
program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
|
||||
to Device Mode Eye Diagram test. The addresses are offsets
|
||||
from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
|
||||
<0x1 0x53> would mean "write the value 0x53 to address 0x81".
|
||||
|
||||
EXAMPLE
|
||||
|
||||
otg: usb-controller {
|
||||
ulpi {
|
||||
phy {
|
||||
compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
|
||||
#phy-cells = <0>;
|
||||
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
|
||||
clock-names = "ref", "sleep";
|
||||
resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
|
||||
reset-names = "phy", "por";
|
||||
v3p3-supply = <&pm8941_l24>;
|
||||
v1p8-supply = <&pm8941_l6>;
|
||||
extcon = <&smbb>;
|
||||
qcom,init-seq = /bits/ 8 <0x1 0x63>;
|
||||
};
|
||||
};
|
||||
};
|
||||
65
Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt
Normal file
65
Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt
Normal file
|
|
@ -0,0 +1,65 @@
|
|||
Qualcomm's USB HSIC PHY
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the
|
||||
following:
|
||||
|
||||
"qcom,usb-hsic-phy-mdm9615"
|
||||
"qcom,usb-hsic-phy-msm8974"
|
||||
|
||||
- #phy-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Should contain 0
|
||||
|
||||
- clocks:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Should contain clock specifier for phy, calibration and
|
||||
a calibration sleep clock
|
||||
|
||||
- clock-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain "phy, "cal" and "cal_sleep"
|
||||
|
||||
- pinctrl-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain "init" and "default" in that order
|
||||
|
||||
- pinctrl-0:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch
|
||||
free state
|
||||
|
||||
- pinctrl-1:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: List of pinctrl settings to apply to mux out the HSIC pins
|
||||
|
||||
EXAMPLE
|
||||
|
||||
usb-controller {
|
||||
ulpi {
|
||||
phy {
|
||||
compatible = "qcom,usb-hsic-phy-msm8974",
|
||||
"qcom,usb-hsic-phy";
|
||||
#phy-cells = <0>;
|
||||
pinctrl-names = "init", "default";
|
||||
pinctrl-0 = <&hsic_sleep>;
|
||||
pinctrl-1 = <&hsic_default>;
|
||||
clocks = <&gcc GCC_USB_HSIC_CLK>,
|
||||
<&gcc GCC_USB_HSIC_IO_CAL_CLK>,
|
||||
<&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>;
|
||||
clock-names = "phy", "cal", "cal_sleep";
|
||||
assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>;
|
||||
assigned-clock-rates = <960000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -10,6 +10,7 @@ Required properties:
|
|||
* allwinner,sun8i-a23-usb-phy
|
||||
* allwinner,sun8i-a33-usb-phy
|
||||
* allwinner,sun8i-h3-usb-phy
|
||||
* allwinner,sun8i-v3s-usb-phy
|
||||
* allwinner,sun50i-a64-usb-phy
|
||||
- reg : a list of offset + length pairs
|
||||
- reg-names :
|
||||
|
|
|
|||
|
|
@ -29,7 +29,6 @@ Optional properties:
|
|||
- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
|
||||
- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
|
||||
- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
|
||||
- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
|
||||
|
||||
Example:
|
||||
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@ Allwinner sun4i A10 musb DRC/OTG controller
|
|||
-------------------------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb"
|
||||
or "allwinner,sun8i-a33-musb"
|
||||
- compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb",
|
||||
"allwinner,sun8i-a33-musb" or "allwinner,sun8i-h3-musb"
|
||||
- reg : mmio address range of the musb controller
|
||||
- clocks : clock specifier for the musb controller ahb gate clock
|
||||
- reset : reset specifier for the ahb reset (A31 and newer only)
|
||||
|
|
|
|||
|
|
@ -20,10 +20,10 @@ See: Documentation/devicetree/bindings/reset/reset.txt
|
|||
with 'reg' property
|
||||
|
||||
- pinctl-names : A pinctrl state named "default" must be defined
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
||||
|
||||
- pinctrl-0 : Pin control group
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
||||
|
||||
- ranges : allows valid 1:1 translation between child's address space and
|
||||
parent's address space
|
||||
|
|
|
|||
|
|
@ -56,6 +56,10 @@ Optional properties:
|
|||
|
||||
- <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
|
||||
|
||||
- in addition all properties from usb-xhci.txt from the current directory are
|
||||
supported as well
|
||||
|
||||
|
||||
This is usually a subnode to DWC3 glue to which it is connected.
|
||||
|
||||
dwc3@4a030000 {
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ Required properties:
|
|||
- interrupts : one EHCI interrupt should be described here
|
||||
- pinctrl-names : a pinctrl state named "default" must be defined
|
||||
- pinctrl-0 : phandle referencing pin configuration of the USB controller
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
||||
- clocks : phandle list of usb clocks
|
||||
- clock-names : should be "ic" for interconnect clock and "clk48"
|
||||
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ Required properties:
|
|||
- vusb33-supply : regulator of USB avdd3.3v
|
||||
- clocks : a list of phandle + clock-specifier pairs, one for each
|
||||
entry in clock-names
|
||||
- clock-names : must contain "sys_ck" for clock of controller;
|
||||
- clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
|
||||
"wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
|
||||
depends on "mediatek,enable-wakeup"
|
||||
- phys : a list of phandle + phy specifier pairs
|
||||
|
|
@ -30,7 +30,7 @@ Optional properties:
|
|||
"id_float" and "id_ground" are optinal which depends on
|
||||
"mediatek,enable-manual-drd"
|
||||
- pinctrl-0 : pin control group
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
||||
|
||||
- maximum-speed : valid arguments are "super-speed", "high-speed" and
|
||||
"full-speed"; refer to usb/generic.txt
|
||||
|
|
@ -56,10 +56,10 @@ ssusb: usb@11271000 {
|
|||
phys = <&phy_port0 PHY_TYPE_USB3>,
|
||||
<&phy_port1 PHY_TYPE_USB2>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
|
||||
clocks = <&topckgen CLK_TOP_USB30_SEL>,
|
||||
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
|
||||
<&pericfg CLK_PERI_USB0>,
|
||||
<&pericfg CLK_PERI_USB1>;
|
||||
clock-names = "sys_ck",
|
||||
clock-names = "sys_ck", "ref_ck",
|
||||
"wakeup_deb_p0",
|
||||
"wakeup_deb_p1";
|
||||
vusb33-supply = <&mt6397_vusb_reg>;
|
||||
|
|
@ -79,8 +79,8 @@ ssusb: usb@11271000 {
|
|||
reg-names = "mac";
|
||||
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
|
||||
clocks = <&topckgen CLK_TOP_USB30_SEL>;
|
||||
clock-names = "sys_ck";
|
||||
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
|
||||
clock-names = "sys_ck", "ref_ck";
|
||||
vusb33-supply = <&mt6397_vusb_reg>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -23,6 +23,7 @@ Required properties:
|
|||
entry in clock-names
|
||||
- clock-names : must contain
|
||||
"sys_ck": for clock of xHCI MAC
|
||||
"ref_ck": for reference clock of xHCI MAC
|
||||
"wakeup_deb_p0": for USB wakeup debounce clock of port0
|
||||
"wakeup_deb_p1": for USB wakeup debounce clock of port1
|
||||
|
||||
|
|
@ -37,7 +38,7 @@ Optional properties:
|
|||
- usb3-lpm-capable : supports USB3.0 LPM
|
||||
- pinctrl-names : a pinctrl state named "default" must be defined
|
||||
- pinctrl-0 : pin control group
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
|
||||
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
||||
|
||||
Example:
|
||||
usb30: usb@11270000 {
|
||||
|
|
@ -47,10 +48,10 @@ usb30: usb@11270000 {
|
|||
reg-names = "mac", "ippc";
|
||||
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
|
||||
clocks = <&topckgen CLK_TOP_USB30_SEL>,
|
||||
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
|
||||
<&pericfg CLK_PERI_USB0>,
|
||||
<&pericfg CLK_PERI_USB1>;
|
||||
clock-names = "sys_ck",
|
||||
clock-names = "sys_ck", "ref_ck",
|
||||
"wakeup_deb_p0",
|
||||
"wakeup_deb_p1";
|
||||
phys = <&phy_port0 PHY_TYPE_USB3>,
|
||||
|
|
@ -67,7 +68,7 @@ usb30: usb@11270000 {
|
|||
|
||||
In the case, xhci is added as subnode to mtu3. An example and the DT binding
|
||||
details of mtu3 can be found in:
|
||||
Documentation/devicetree/bindings/usb/mtu3.txt
|
||||
Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
|
||||
|
||||
Required properties:
|
||||
- compatible : should contain "mediatek,mt8173-xhci"
|
||||
|
|
@ -82,6 +83,7 @@ Required properties:
|
|||
entry in clock-names
|
||||
- clock-names : must be
|
||||
"sys_ck": for clock of xHCI MAC
|
||||
"ref_ck": for reference clock of xHCI MAC
|
||||
|
||||
Optional properties:
|
||||
- vbus-supply : reference to the VBUS regulator;
|
||||
|
|
@ -94,8 +96,8 @@ usb30: usb@11270000 {
|
|||
reg-names = "mac";
|
||||
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
|
||||
clocks = <&topckgen CLK_TOP_USB30_SEL>;
|
||||
clock-names = "sys_ck";
|
||||
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
|
||||
clock-names = "sys_ck", "ref_ck";
|
||||
vusb33-supply = <&mt6397_vusb_reg>;
|
||||
usb3-lpm-capable;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
|
|||
the node is not important. The content of the node is defined in dwc3.txt.
|
||||
|
||||
Phy documentation is provided in the following places:
|
||||
Documentation/devicetree/bindings/phy/qcom,dwc3-usb-phy.txt
|
||||
Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
|
||||
|
||||
Example device nodes:
|
||||
|
||||
|
|
|
|||
20
Documentation/devicetree/bindings/usb/ulpi.txt
Normal file
20
Documentation/devicetree/bindings/usb/ulpi.txt
Normal file
|
|
@ -0,0 +1,20 @@
|
|||
ULPI bus binding
|
||||
----------------
|
||||
|
||||
Phys that are behind a ULPI connection can be described with the following
|
||||
binding. The host controller shall have a "ulpi" named node as a child, and
|
||||
that node shall have one enabled node underneath it representing the ulpi
|
||||
device on the bus.
|
||||
|
||||
EXAMPLE
|
||||
-------
|
||||
|
||||
usb {
|
||||
compatible = "vendor,usb-controller";
|
||||
|
||||
ulpi {
|
||||
phy {
|
||||
compatible = "vendor,phy";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -27,6 +27,7 @@ Required properties:
|
|||
Optional properties:
|
||||
- clocks: reference to a clock
|
||||
- usb3-lpm-capable: determines if platform is USB3 LPM capable
|
||||
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
|
||||
|
||||
Example:
|
||||
usb@f0931000 {
|
||||
|
|
|
|||
83
Documentation/devicetree/bindings/usb/usb251xb.txt
Normal file
83
Documentation/devicetree/bindings/usb/usb251xb.txt
Normal file
|
|
@ -0,0 +1,83 @@
|
|||
Microchip USB 2.0 Hi-Speed Hub Controller
|
||||
|
||||
The device node for the configuration of a Microchip USB251xB/xBi USB 2.0
|
||||
Hi-Speed Controller.
|
||||
|
||||
Required properties :
|
||||
- compatible : Should be "microchip,usb251xb" or one of the specific types:
|
||||
"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
|
||||
"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
|
||||
- hub-reset-gpios : Should specify the gpio for hub reset
|
||||
|
||||
Optional properties :
|
||||
- reg : I2C address on the selected bus (default is <0x2C>)
|
||||
- skip-config : Skip Hub configuration, but only send the USB-Attach command
|
||||
- vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424)
|
||||
- product-id : USB Product ID of the hub (16 bit, default depends on type)
|
||||
- device-id : USB Device ID of the hub (16 bit, default is 0x0bb3)
|
||||
- language-id : USB Language ID (16 bit, default is 0x0000)
|
||||
- manufacturer : USB Manufacturer string (max 31 characters long)
|
||||
- product : USB Product string (max 31 characters long)
|
||||
- serial : USB Serial string (max 31 characters long)
|
||||
- {bus,self}-powered : selects between self- and bus-powered operation (default
|
||||
is self-powered)
|
||||
- disable-hi-speed : disable USB Hi-Speed support
|
||||
- {multi,single}-tt : selects between multi- and single-transaction-translator
|
||||
(default is multi-tt)
|
||||
- disable-eop : disable End of Packet generation in full-speed mode
|
||||
- {ganged,individual}-sensing : select over-current sense type in self-powered
|
||||
mode (default is individual)
|
||||
- {ganged,individual}-port-switching : select port power switching mode
|
||||
(default is individual)
|
||||
- dynamic-power-switching : enable auto-switching from self- to bus-powered
|
||||
operation if the local power source is removed or unavailable
|
||||
- oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms)
|
||||
- compound-device : indicated the hub is part of a compound device
|
||||
- port-mapping-mode : enable port mapping mode
|
||||
- string-support : enable string descriptor support (required for manufacturer,
|
||||
product and serial string configuration)
|
||||
- non-removable-ports : Should specify the ports which have a non-removable
|
||||
device connected.
|
||||
- sp-disabled-ports : Specifies the ports which will be self-power disabled
|
||||
- bp-disabled-ports : Specifies the ports which will be bus-power disabled
|
||||
- max-sp-power : Specifies the maximum current the hub consumes from an
|
||||
upstream port when operating as self-powered hub including the power
|
||||
consumption of a permanently attached peripheral if the hub is
|
||||
configured as a compound device. The value is given in mA in a 0 - 500
|
||||
range (default is 2).
|
||||
- max-bp-power : Specifies the maximum current the hub consumes from an
|
||||
upstream port when operating as bus-powered hub including the power
|
||||
consumption of a permanently attached peripheral if the hub is
|
||||
configured as a compound device. The value is given in mA in a 0 - 500
|
||||
range (default is 100).
|
||||
- max-sp-current : Specifies the maximum current the hub consumes from an
|
||||
upstream port when operating as self-powered hub EXCLUDING the power
|
||||
consumption of a permanently attached peripheral if the hub is
|
||||
configured as a compound device. The value is given in mA in a 0 - 500
|
||||
range (default is 2).
|
||||
- max-bp-current : Specifies the maximum current the hub consumes from an
|
||||
upstream port when operating as bus-powered hub EXCLUDING the power
|
||||
consumption of a permanently attached peripheral if the hub is
|
||||
configured as a compound device. The value is given in mA in a 0 - 500
|
||||
range (default is 100).
|
||||
- power-on-time : Specifies the time it takes from the time the host initiates
|
||||
the power-on sequence to a port until the port has adequate power. The
|
||||
value is given in ms in a 0 - 510 range (default is 100ms).
|
||||
|
||||
Examples:
|
||||
usb2512b@2c {
|
||||
compatible = "microchip,usb2512b";
|
||||
hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb2514b@2c {
|
||||
compatible = "microchip,usb2514b";
|
||||
reg = <0x2c>;
|
||||
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
vendor-id = /bits/ 16 <0x0000>;
|
||||
product-id = /bits/ 16 <0x0000>;
|
||||
string-support;
|
||||
manufacturer = "Foo";
|
||||
product = "Foo-Bar";
|
||||
serial = "1234567890A";
|
||||
};
|
||||
Loading…
Reference in a new issue