From 90fbdd101eb431bc1a8376c64e6f4cd8d9f56b90 Mon Sep 17 00:00:00 2001 From: Subbaraman Narayanamurthy Date: Thu, 27 May 2021 19:48:03 -0700 Subject: [PATCH] ARM: dts: msm: add PM7250B and SMB1394 to sdxlemur-mtp-mbb-emmc boards sdxlemur-mtp-mbb-emmc boards use PM7250B and SMB1394 similar to sdxlemur-mtp-mbb boards. However, sdxlemur-mtp-mbb-emmc.dtsi has sdxlemur-pmic-overlay.dtsi which only adds PMK8350 and PMX65. Add pm7250b.dtsi and smb1394.dtsi to sdxlemur-mtp-mbb-emmc.dtsi so that sdxlemur-mtp-mbb-emmc boards can now use USB VBUS detection from PM7250B charger peripheral instead of VBUS_DET peripheral from PMX65. Change-Id: I72a63eb3f6b3f2b8c779e40593da9b7499a69478 --- qcom/sdxlemur-mtp-mbb-emmc.dtsi | 317 +++++++++++++++++++++++++++++++- 1 file changed, 316 insertions(+), 1 deletion(-) diff --git a/qcom/sdxlemur-mtp-mbb-emmc.dtsi b/qcom/sdxlemur-mtp-mbb-emmc.dtsi index d1848edd40a0..ea6d71dc8fb3 100644 --- a/qcom/sdxlemur-mtp-mbb-emmc.dtsi +++ b/qcom/sdxlemur-mtp-mbb-emmc.dtsi @@ -1,7 +1,13 @@ #include "sdxlemur-pmic-overlay.dtsi" +#include "pm7250b.dtsi" +#include +#include &soc { - + mbb_batterydata: qcom,battery-data { + qcom,batt-id-range-pct = <15>; + #include "qg-batterydata-alium-3600mah.dtsi" + }; }; &sdhc_1 { @@ -34,3 +40,312 @@ status = "ok"; }; + +&spmi_debug_bus { + qcom,pm7250b-debug@2 { + compatible = "qcom,spmi-pmic"; + reg = <2 SPMI_USID>; + #address-cells = <2>; + #size-cells = <0>; + qcom,can-sleep; + }; +}; + +&pm7250b_clkdiv { + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; +}; + +&pm7250b_vadc { + charger_skin_therm { + reg = ; + label = "charger_skin_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + conn_therm { + reg = ; + label = "conn_therm"; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + }; + + smb1390_therm@e { + qcom,scale-fn-type = ; + }; +}; + +&pm7250b_adc_tm { + io-channels = <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>, + <&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>; + + charger_skin_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + conn_therm { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&thermal_zones { + chg-skin-therm-usr { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-governor = "user_space"; + thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM1_100K_PU>; + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + active-config1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-therm-usr { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-governor = "user_space"; + thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM3_100K_PU>; + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + active-config1 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; +}; + +&pm7250b_charger { + #io-channel-cells = <1>; + io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>, + <&pm7250b_vadc ADC5_USB_IN_I>, + <&pm7250b_vadc ADC5_CHG_TEMP>, + <&pm7250b_vadc ADC5_DIE_TEMP>, + <&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>, + <&pm7250b_vadc ADC5_SBUx>, + <&pm7250b_vadc ADC5_VPH_PWR>, + <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>, + <&pm7250b_qg PSY_IIO_RESISTANCE_ID>, + <&pm7250b_qg PSY_IIO_VOLTAGE_NOW>, + <&pm7250b_qg PSY_IIO_TEMP>, + <&pm7250b_qg PSY_IIO_CAPACITY>, + <&pm7250b_qg PSY_IIO_VOLTAGE_OCV>, + <&pm7250b_qg PSY_IIO_VOLTAGE_AVG>, + <&pm7250b_qg PSY_IIO_DEBUG_BATTERY>, + <&pm7250b_qg PSY_IIO_REAL_CAPACITY>, + <&pm7250b_qg PSY_IIO_CC_SOC>, + <&pm7250b_qg PSY_IIO_CURRENT_NOW>, + <&pm7250b_qg PSY_IIO_VOLTAGE_MAX>, + <&pm7250b_qg PSY_IIO_CHARGE_FULL>, + <&pm7250b_qg PSY_IIO_CHARGE_COUNTER>, + <&pm7250b_qg PSY_IIO_CYCLE_COUNT>, + <&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>, + <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>, + <&smb1394_div2_cp_primary PSY_IIO_PARALLEL_MODE>, + <&smb1394_div2_cp_primary PSY_IIO_PARALLEL_OUTPUT_MODE>, + <&smb1394_div2_cp_primary PSY_IIO_MIN_ICL>, + <&smb1394_div2_cp_primary PSY_IIO_CP_SWITCHER_EN>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ILIM>, + <&smb1394_div2_cp_primary PSY_IIO_CP_DIE_TEMP>; + io-channel-names = "usb_in_voltage", + "usb_in_current", + "chg_temp", + "die_temp", + "conn_temp", + "sbux_res", + "vph_voltage", + "skin_temp", + "resistance_id", + "voltage_now", + "temp", + "capacity", + "voltage_ocv", + "voltage_avg", + "debug_battery", + "real_capacity", + "cc_soc", + "current_now", + "voltage_max", + "charge_full", + "charge_counter", + "cycle_count", + "charge_full_design", + "time_to_full_now", + "cp_parallel_mode", + "cp_parallel_output_mode", + "cp_min_icl", + "cp_switcher_en", + "cp_enable", + "cp_ilim", + "cp_die_temp"; + qcom,battery-data = <&mbb_batterydata>; + qcom,sec-charger-config = <1>; + qcom,auto-recharge-soc = <98>; + qcom,step-charging-enable; + qcom,sw-jeita-enable; + qcom,charger-temp-max = <800>; + qcom,smb-temp-max = <800>; + qcom,suspend-input-on-debug-batt; + qcom,fcc-stepping-enable; + qcom,fcc-step-delay-ms = <100>; + qcom,fcc-step-size-ua = <100000>; + qcom,thermal-mitigation = <3600000 3000000 1500000 1000000 500000>; + qcom,smb-internal-pull-kohm = <0>; + qcom,en-skin-therm-mitigation; + qcom,hvdcp3-standalone-config; + dpdm-supply = <&usb2_phy>; + + smb5_vbus: qcom,smb5-vbus { + regulator-name = "smb5-vbus"; + }; + + smb5_vconn: qcom,smb5-vconn { + regulator-name = "smb5-vconn"; + }; +}; + +&pm7250b_qg { + #io-channel-cells = <1>; + io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>, + <&pm7250b_vadc ADC5_BAT_ID_100K_PU>, + <&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>, + <&pm7250b_charger PSY_IIO_RECHARGE_SOC>, + <&pm7250b_charger PSY_IIO_FORCE_RECHARGE>, + <&pm7250b_charger PSY_IIO_CHARGE_DONE>, + <&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>; + io-channel-names = "batt-therm", + "batt-id", + "input_current_limited", + "recharge_soc", + "force_recharge", + "charge_done", + "cp_charging_enabled"; + qcom,battery-data = <&mbb_batterydata>; + qcom,qg-iterm-ma = <150>; + qcom,hold-soc-while-full; + qcom,linearize-soc; + qcom,cl-feedback-on; + qcom,tcss-enable; + qcom,fvss-enable; + qcom,fvss-vbatt-mv = <3300>; + qcom,bass-enable; + qcom,use-cp-iin-sns; +}; + +&pm7250b_pdphy { + vdd-pdphy-supply = <&L10B>; + vbus-supply = <&smb5_vbus>; + vconn-supply = <&smb5_vconn>; + + #io-channel-cells = <1>; + io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>, + <&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>, + <&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>, + <&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>, + <&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>, + <&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>, + <&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>, + <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>, + <&pm7250b_charger PSY_IIO_PR_SWAP>, + <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>, + <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>, + <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>, + <&pm7250b_charger PSY_IIO_TYPEC_MODE>, + <&pm7250b_charger PSY_IIO_PE_START>; + io-channel-names = "pd_active", + "typec_cc_orientation", + "connector_type", + "typec_power_role", + "pd_usb_suspend_supported", + "typec_src_rp", + "pd_in_hard_reset", + "pr_current_max", + "pr_swap", + "pd_voltage_min", + "pd_voltage_max", + "real_type", + "typec_mode", + "pe_start"; +}; + +&pm7250b_gpios { + smb_stat { + smb_stat_default: smb_stat_default { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,pull-up-strength = ; + power-source = <0>; + }; + }; +}; + +&i2c_3 { + status = "ok"; + #include "smb1394.dtsi" +}; + +&smb1394 { + interrupts = <0x2 0xc5 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&spmi_bus>; + interrupt-names = "smb1394"; + pinctrl-names = "default"; + pinctrl-0 = <&smb_stat_default>; + status = "ok"; +}; + +&smb1394_div2_cp_primary { + io-channels = <&pm7250b_vadc ADC5_AMUX_THM2>, + <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>, + <&pm7250b_charger PSY_IIO_ADAPTER_CC_MODE>, + <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>, + <&pm7250b_charger PSY_IIO_USB_INPUT_CURRENT_SETTLED>, + <&pm7250b_charger PSY_IIO_SMB_EN_MODE>, + <&pm7250b_charger PSY_IIO_SMB_EN_REASON>; + io-channel-names = "die_temp", + "real_type", + "adapter_cc_mode", + "pd_current_max", + "input_current_settled", + "smb_en_mode", + "smb_en_reason"; + qcom,parallel-input-mode = <1>; /* USBIN */ + qcom,parallel-output-mode = <2>; /* VBAT */ + status = "ok"; +}; + +&usb { + extcon = <&pm7250b_pdphy>, <&eud>; + + #io-channel-cells = <1>; + io-channels= <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>; + io-channel-names = "chg_type"; +}; + +&vbus_detect { + status = "disabled"; +};