power: supply: max17042_battery: Add default platform_data fallback data

Some x86 machines use a max17047 fuel-gauge and x86 might be missing
platform_data if not provided by SFI.

This commit adds default platform_data as fallback option so that the
driver can work on boards where no platform_data is provided.

Since not all boards have a thermistor hooked up, set temp_min to 0 and
change the health checks from temp <= temp_min to temp < temp_min to
not trigger on such boards (where temp reads 0).

Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
This commit is contained in:
Hans de Goede 2017-04-14 20:32:49 +02:00 • committed by Sebastian Reichel
commit 917362135b
2 changed files with 58 additions and 8 deletions

View file

@ -150,12 +150,12 @@ static int max17042_get_battery_health(struct max17042_chip *chip, int *health)
if (ret < 0)
goto health_error;
if (temp <= chip->pdata->temp_min) {
if (temp < chip->pdata->temp_min) {
*health = POWER_SUPPLY_HEALTH_COLD;
goto out;
}
if (temp >= chip->pdata->temp_max) {
if (temp > chip->pdata->temp_max) {
*health = POWER_SUPPLY_HEALTH_OVERHEAT;
goto out;
}
@ -772,8 +772,9 @@ static void max17042_init_worker(struct work_struct *work)
#ifdef CONFIG_OF
static struct max17042_platform_data *
max17042_get_pdata(struct device *dev)
max17042_get_pdata(struct max17042_chip *chip)
{
struct device *dev = &chip->client->dev;
struct device_node *np = dev->of_node;
u32 prop;
struct max17042_platform_data *pdata;
@ -806,10 +807,55 @@ max17042_get_pdata(struct device *dev)
return pdata;
}
#else
static struct max17042_reg_data max17047_default_pdata_init_regs[] = {
/*
* Some firmwares do not set FullSOCThr, Enable End-of-Charge Detection
* when the voltage FG reports 95%, as recommended in the datasheet.
*/
{ MAX17047_FullSOCThr, MAX17042_BATTERY_FULL << 8 },
};
static struct max17042_platform_data *
max17042_get_pdata(struct device *dev)
max17042_get_pdata(struct max17042_chip *chip)
{
return dev->platform_data;
struct device *dev = &chip->client->dev;
struct max17042_platform_data *pdata;
int ret, misc_cfg;
if (dev->platform_data)
return dev->platform_data;
/*
* The MAX17047 gets used on x86 where we might not have pdata, assume
* the firmware will already have initialized the fuel-gauge and provide
* default values for the non init bits to make things work.
*/
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return pdata;
if (chip->chip_type != MAXIM_DEVICE_TYPE_MAX17042) {
pdata->init_data = max17047_default_pdata_init_regs;
pdata->num_init_data =
ARRAY_SIZE(max17047_default_pdata_init_regs);
}
ret = regmap_read(chip->regmap, MAX17042_MiscCFG, &misc_cfg);
if (ret < 0)
return NULL;
/* If bits 0-1 are set to 3 then only Voltage readings are used */
if ((misc_cfg & 0x3) == 0x3)
pdata->enable_current_sense = false;
else
pdata->enable_current_sense = true;
pdata->vmin = MAX17042_DEFAULT_VMIN;
pdata->vmax = MAX17042_DEFAULT_VMAX;
pdata->temp_min = MAX17042_DEFAULT_TEMP_MIN;
pdata->temp_max = MAX17042_DEFAULT_TEMP_MAX;
return pdata;
}
#endif
@ -858,20 +904,20 @@ static int max17042_probe(struct i2c_client *client,
return -ENOMEM;
chip->client = client;
chip->chip_type = id->driver_data;
chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config);
if (IS_ERR(chip->regmap)) {
dev_err(&client->dev, "Failed to initialize regmap\n");
return -EINVAL;
}
chip->pdata = max17042_get_pdata(&client->dev);
chip->pdata = max17042_get_pdata(chip);
if (!chip->pdata) {
dev_err(&client->dev, "no platform data provided\n");
return -EINVAL;
}
i2c_set_clientdata(client, chip);
chip->chip_type = id->driver_data;
psy_cfg.drv_data = chip;
/* When current is not measured,