From 91898bbfcdcd2bdc1f6b0b84613fe3a658a5ff44 Mon Sep 17 00:00:00 2001 From: Shravan Nevatia Date: Fri, 30 Apr 2021 02:50:07 +0530 Subject: [PATCH] ARM: dts: msm: Add imx766 configs in DTSI Add actuator, sensor, eeprom nodes for QPD sensor IMX766 in MTP dtsi. CRs-Fixed: 2952585 Change-Id: Ic31c754eb40cf3bcd5af99ba1a9ad991b45b3b76 --- lahaina-camera-sensor-mtp.dtsi | 78 ++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/lahaina-camera-sensor-mtp.dtsi b/lahaina-camera-sensor-mtp.dtsi index 488c6cb18c3c..bde7707381d2 100644 --- a/lahaina-camera-sensor-mtp.dtsi +++ b/lahaina-camera-sensor-mtp.dtsi @@ -217,6 +217,42 @@ clock-rates = <24000000>; }; + eeprom9: qcom,eeprom9 { + cell-index = <7>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L3J>; + cam_vana-supply = <&L4I>; + cam_v_custom1-supply = <&L5I>; + cam_vdig-supply = <&L1I>; + cam_clk-supply = <&cam_cc_titan_top_gdsc>; + cam_vaf-supply = <&L7I>; + regulator-names = "cam_vio", "cam_vana", "cam_v_custom1", + "cam_vdig", "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2700000 1700000 1000000 0 2700000>; + rgltr-max-voltage = <1800000 2900000 1900000 1200000 0 3000000>; + rgltr-load-current = <15000 52000 72000 140000 0 103000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rst0>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rst0>; + gpios = <&tlmm 100 0>, + <&tlmm 17 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + cci-master = <0>; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + status = "ok"; + }; + qcom,cam-sensor0 { cell-index = <5>; compatible = "qcom,cam-sensor"; @@ -432,6 +468,48 @@ clock-cntl-level = "nominal"; clock-rates = <24000000>; }; + + qcom,cam-sensor9 { + cell-index = <10>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + eeprom-src = <&eeprom9>; + actuator-src = <&actuator_triple_tele>; + led-flash-src = <&led_flash_triple_rear_aux>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&L3J>; + cam_vana-supply = <&L4I>; + cam_v_custom1-supply = <&L5I>; + cam_vdig-supply = <&L1I>; + cam_clk-supply = <&cam_cc_titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_v_custom1", + "cam_vdig", "cam_clk", "cam_bob"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2700000 1700000 1000000 0 3200000>; + rgltr-max-voltage = <1800000 2900000 1900000 1200000 0 3960000>; + rgltr-load-current = <15000 52000 72000 140000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rst0>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rst0>; + gpios = <&tlmm 100 0>, + <&tlmm 17 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + cci-master = <0>; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + status = "ok"; + }; }; &cam_cci1 {