From 95c448e702322a23175d9831158ca96f82a484ee Mon Sep 17 00:00:00 2001 From: Prashanth K Date: Tue, 25 Feb 2025 14:43:34 +0530 Subject: [PATCH] UPSTREAM: usb: dwc3: host: Set XHCI_SG_TRB_CACHE_SIZE_QUIRK Upstream commit bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI which fixes XHC timeout, which was seen on synopsys XHCs while using SG buffers. But the support for this quirk isn't present in the DWC3 layer. We will encounter this XHCI timeout/hung issue if we run iperf loopback tests using RTL8156 ethernet adaptor on DWC3 targets with scatter-gather enabled. This gets resolved after enabling the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using the xhci device property since its needed for DWC3 controller. In Synopsys DWC3 databook, Table 9-3: xHCI Debug Capability Limitations Chained TRBs greater than TRB cache size: The debug capability driver must not create a multi-TRB TD that describes smaller than a 1K packet that spreads across 8 or more TRBs on either the IN TR or the OUT TR. Change-Id: I51c065d76939b6fc34e80dc970568ba5c9d40567 Cc: stable@vger.kernel.org #5.11 Signed-off-by: Prashanth K Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20240116055816.1169821-2-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Prashanth K --- drivers/usb/dwc3/host.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 2a06550c97c6..0831cc7059f9 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -43,7 +43,7 @@ out: int dwc3_host_init(struct dwc3 *dwc) { - struct property_entry props[6]; + struct property_entry props[7]; struct platform_device *xhci; int ret, irq; struct resource *res; @@ -88,6 +88,8 @@ int dwc3_host_init(struct dwc3 *dwc) memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props)); + props[prop_idx++] = PROPERTY_ENTRY_BOOL("xhci-sg-trb-cache-size-quirk"); + if (dwc->usb3_lpm_capable) props[prop_idx++] = PROPERTY_ENTRY_BOOL("usb3-lpm-capable");